Models: 2794.709 / 2989.709 / 215AA.709 / 780AA.709

Thank you for selecting American Standard – the benchmark of fine quality for over 140 years. To ensure this product is installed properly, please read these instructions carefully before you begin. (Certain installations may require professional help.) Also be sure your installation conforms to local codes.

CAUTION: PRODUCT IS FRAGILE. TO AVOID BREAKAGE AND POSSIBLE INJURY HANDLE WITH CARE!

NOTE: Pictures may not exactly define contour of china and components.

What’s Included?

SOLD SEPARATELY

BEFORE YOU START: Please see specification sheet for rough-in information

Recommended fitting type for back-to-back installations.

American Standard Elevate 60×30 Curved Tub Owner’s Manual

THE BEST BATH OR SHOWER EXPERIENCE?

Thank you for buying an American Standard bath or shower product.

We’re so grateful you did, and you will be too. Not just while you’re waking up each morning, but also every time a dirty gardener, sweaty soccer player, or muddy dog gets cleaned up. How do we know? Just like you, we’ve lived with that same beautiful chaos called life for almost 150 years. We believe that while every home should appreciate in value, we never forget the sentimental value that grows from enjoying life in the heart of home— your kitchen and bath. That’s why we love your stories and ideas; they help us innovate with products that make your life easier.

Or, visit americanstandard-us.com/bathroom/bathtubs to watch video, view/download installation manuals or learn more about your product.

Have a question or need help on install?
For questions or help on installation call us at 800 442-1902.

For a copy of our warranty in additional languages,
please visit Americanstandard.com

OWNERS MANUAL
ElevateTM 60×30 Curved Tub
Models RHO 2576102 / LHO 2576202

INSTALLATION INSTRUCTIONS

Thank you for selecting American Standard – the benchmark of fine quality for over 150 years. To ensure this product is installed properly, please read these instructions carefully before you begin. Certain installations may require professional help.

INSTALLATION PREPARATION
• Please unpack carefully and identify all parts needed for installation by using the Box Contents page as a reference. Inspect the product and report any damages or missing parts immediately to customer care by calling 800-442-1902. Follow the prompts for consumer/bathing. Local building codes vary by ocation.
Observe all local plumbing and building codes.
NOTE: Take extra care in handling the front surfaces of the walls. Use only non-abrasive cloths to avoid scratching.

• The Elevate Tub dimensions are nominal and meant for a standard 60″ x 30″ alcove. Due to the curved design, depths up to 36″ may also be used. Please measure your alcove to determine if the Elevate tub will work in your alcove prior to installation.
• Ensure adequate wall support is provided to area where tub is to be installed.
• Tub and wall material must be installed prior to the door installation.
• Wear protective equipment during installation to avoid injury.
• Please keep these instructions for after care and customer service details.

BOX CONTENTS

• Metal Clips x4
  
• Metal Clips x4

RECOMMENDED TOOLS AND MATERIALS

Installation steps will indicate which tools should be used with asscociated letter

1. Level
   
2. Tape Measure
   
3. Square
   
4. Screwdriver
   
5. Pipe Wrench
   
6. Caulking Gun
   
7. Slip Joint Pliers
   
8. Personal Safety Equipment
   
9. Standard Woodworking Tools
10. MATERIALS Exterior Rated Screws Plumber’s Putty Drop Cloth OPTIONAL: Mortar Mix

BEFORE YOU BEGIN
Inspect your product thoroughly before installing. Take extra care in handling surfaces of the bath and use only non-abrasive cloths to avoid scratching. Observe all local plumbing and building codes.

INSTALLATION INSTRUCTIONS

IMPORTANT GENERAL INFORMATION
This unit is best installed by two people. Cover drain with tape prior to installation to prevent the loss of small parts. Unpack your unit carefully and inspect for freight damage. Lay out and identify all parts using Box Contents as a reference. Before discarding the carton check to see that no small hardware parts have fallen to the bottom of the box. If any parts are damaged or missing refer to the description noted in the instructions when inquiring about replacements.
When installing coordinating bath walls, additional studs may be required. Refer to those installation instructions prior to installing tub. Take extra care when driving nails or screws to avoid damaging the tub.

FRAMING INSTRUCTIONS

1. Locate studs as required. Ensure roughing-in dimensions are proper, plumb, and square (Fig. 1). It is strongly recommended that an additional opening be provided for access to the drain components.
2. Install drain components to the bath following the manufacturer’s instructions. See the roughing-in drawing for suggested opening size and location dimensions in specification page.

TUB INSTALLATION

SUGGESTED BATH INSTALLATION METHOD

SECURE THE BATH TO THE STUDS AS SHOWN FOR WOOD OR STEEL STUD CONSTRUCTION.

1. Make sure the apron brackets are securely attached. (Figure 1)
2. Place tub into studded alcove. (Figure 2)
3. Check level front to back and side to side, shim as necessary (Figure 3). NOTE: Ensure the feet of the tub are touching the floor. Shim as necessary or use optional mortar to level. To secure the tub to wood studs, attach metal flange clips (Figure 2) to corners of tub as illustrated and secure clips to the studs.
4. Bend the tabs of the metal clip over tub flange to secure tub (Figure 2).
5. Add plastic clips to tub flange at all remaining stud locations to anchor tub to alcove. (Figure 4)
6. Any finish material such as tile or wallboard must be self-supporting if it contacts the deck of the bath. Flooring will be butted against the bottom of the tub apron, also holding the tub in place.

POST INSTALLATION CLEAN-UP

Remove all construction debris. Install any accessories, shelves or doors according to manufacturer’s installation instructions. Post installation clean-up generally can be completed using warm water and liquid dishwashing detergent.
Stubborn dirt or stains may be removed using granular Spic and Span® mixed with water. Painter’s naphtha can be used to remove excess adhesives and/or wet oil-base paint.

AFTERCARE AND CLEANING
Always fill the tub with temperate water. Excessively hot water may cause surface damage. Clean after use with a mild liquid household detergent cleaner. Abrasive cleaners such as Lestoil®, Lysol® Disinfectant (spray or concentrate), or Lysol® Basin, Tub and Tile Cleaner, Windex®, Mr. Clean®, Dow® Disinfectant Bathroom Cleaner, or cleaning products in aerosol cans should not be used.
DO NOT USE HARSH CHEMICALS ON TUB SURFACE

Do not use wire brushes, knives or sharp objects to remove stains, cigarette tar deposits, or other surface blemishes. Abrasive cleaners or powders must not be used, since they will dull the surface. Do not wax areas where you walk or stand.
Do not allow nail polish remover, acetone, dry cleaning fluid, paint remover or other solvents to come into contact with the surface. Clean the surrounding surface immediately after using caustic drain cleaners. Burning cigarettes will damage the surface. Should damage to the fixture occur, repairs can be made quickly and easily. Your distributor or builder can provide details.

SPIC AND SPAN® is a registered trademark of The Spic And Span Company
LESTOIL® is a registered trademark of the Clorox Company
LYSOL® is a registered trademark of Reckitt Benckiser
WINDEX® is a registered trademark of S.C. Johnson & Son, Inc
MR. CLEAN® is a registered trademark of Agile Pursuits Franchising, Inc.
DOW® is a registered trademark of Dow Chemical Company

WARRANTY

AS AMERICA, INC. 10 YEAR WARRANTY FOR SHOWER BASES AND BATHTUBS
Residential Warranty: AS America, Inc. (“American Standard”) warrants this product against defects in materials and workmanship under normal residential use for TEN (10) years by the original consumer-purchaser commencing from the date of purchase. Commercial Warranty: American Standard warrants this product against defects in materials and workmanship under normal commercial use for THREE (3) years by the original business-purchaser commencing from the date of purchase.

Non-Transferrable: This warranty is provided for the exclusive benefit of the original consumer-purchaser or business-purchaser. This warranty is non-transferable, including, but not limited, to any subsequent purchasers or owners. The sole exception to the non-transferability of this warranty is for products purchased by a plumber, contractor or similar service provider, in which case this warranty extends to the first residential or commercial property owner on whose behalf the product was purchased for installation.

Geographic Limitation: This warranty applies only to products installed in the United States of America, Canada or Mexico

Option to Repair or Replace: If a defect arises and a valid claim is received during the warranty period, American Standard will, at its option, either repair or replace the defective product free of charge. The decision whether to repair or replace is determined by American Standard in its sole discretion. Proof of purchase (original sales receipt) must be provided to American Standard with all warranty claims. This warranty only applies to American Standard StruXure™ tubs. Unless otherwise specified, all other American Standard options and
accessories are covered by the AS AMERICA, INC. ONE YEAR LIMITED WARRANTY, which warrants against defects in material and workmanship for one (1) year from the date of first purchase.

EXCLUSIONS AND LIMITATIONS

1. This warranty only applies to products purchased after April 1, 2021.
2. This warranty only applies to products purchased through an authorized American Standard dealer or re-seller.
3. This warranty does not apply to defects or damage caused by non-genuine American Standard parts, installation error, product abuse, product misuse, improper maintenance, improper care or cleaning, improper repair or installation, and/or movement or transfer of the product from its original installation location (whether performed by the owner, a plumber, a contractor, a service company, or anyone else). Because improper care and cleaning can cause significant damage to the product, it is strongly recommended that you follow the Care and Cleaning Instructions (as well as all other instructions) that accompanied the product.
4. American Standard is not responsible for labor charges and/or damage incurred during installation, repair or replacement. In no event will American Standard be liable for the cost of repair or replacement of any installation materials, including, but not limited to, tile or marble.
5. This warranty does not apply to deterioration through normal wear and tear and the expense of normal maintenance.
6. American Standard does not warrant that this product and/or its installation complies with local code requirements. American Standard recommends that you consult with a plumbing contractor about local code requirements.

TO THE EXTENT PERMITTED BY LAW, THIS WARRANTY IS EXCLUSIVE AND IN LIEU OF ALL OTHER WARRANTIES, WHETHER ORAL OR WRITTEN, STATUTORY, EXPRESS OR IMPLIED. AMERICAN STANDARD HEREBY EXCLUDES SPECIAL, INCIDENTAL AND CONSEQUENTIAL DAMAGES FOR ANY BREACH OF ANY EXPRESS OR IMPLIED WARRANTY APPLICABLE TO THIS PRODUCT.
Some states do not allow the exclusion or limitation of incidental or consequential damages, so the above limitations and exclusions may not
apply to you. This warranty gives you specific legal rights, and you may also have other rights which vary from state to state (or province, as applicable).

OBTAINING WARRANTY SERVICE
If you believe that you have a warranty claim, contact American Standard, either through an authorized AS America, Inc. dealer or re-seller, by writing to the addresses below, or visiting the website below:

UNITED STATES
American Standard Brands 30 Knightsbridge Road, Suite 301 Piscataway, New Jersey 08854 Attention: Director of Customer Care For residents of the United States, warranty information may also be obtained by calling the following toll free number: (800) 442-1902  www.americanstandard.com

CANADA
LIXIL Canada, Inc. 5900 Avebury Rd. Mississauga, Ontario Canada L5R 3M3 Toll Free: (800) 387-0369 www.americanstandard.ca

MEXICO
American Standard B&K Mexico S. de R.L. de C.V. Via Morelos #330
Col. Santa Clara Ecatepec 55540 Edo. Mexico Toll Free: 01-800-839-1200
www.americanstandard.com.mx

PLEASE COMPLETE AMERICAN STANDARD WARRANTY REGISTRATION PROCESS AND SAVE THIS WARRANTY NFORMATION IMPORTANT:
Registration of the shower doors must be completed for this warranty to become effective. Your registration will make it easier to contact you in the event of a
product recall.

INSTRUCTIONS: Register your shower doors at www.americanstandard.com. Please save your proof of purchase (sale receipt). If you need assistance or do not have access to our website, please contact American Standard Customer Care at: (800) 442-1902. An American Standard representative will assist in completing the warranty registration.
*In California, your warranty rights remain intact even if you do not complete the registration process.
CANADA
LIXIL Canada, Inc.
5900 Avebury Rd.
Mississauga, Ontario
Canada L5R 3M3
Toll Free: (800) 387-0369
www.americanstandard.ca
MEXICO
American Standard B&K Mexico
S. de R.L. de C.V.
Via Morelos #330
Col. Santa Clara
Ecatepec 55540 Edo. Mexico
Toll Free: 01-800-839-1200
www.americanstandard.com.mx
INSTRUCTIONS: Register your shower doors at www.americanstandard.com. Please save your proof of purchase (sale receipt). If you need assistance or do not
have access to our website, please contact American Standard Customer Care at: (800) 442-1902. An American Standard representative will assist in completing
the warranty registration.

• In California, your warranty rights remain intact even if you do not complete the registration process

THIS WARRANTY IS NOT TRANSFERABLE FROM ORIGINAL CONSUMER PURCHASER

TELL US WHAT YOU THINK!

Please leave us a product review or story at americanstandard.com/reviews

Great Tub
03/13/2018 06:52:29 CDT American Standard Bathtubs Saver 60 Inch by 34 Inch Integral Apron Bathtub. Left Hand Drain
Love the tub. It is very roomy and would definitely buy it again. Our old tub cracked so we got this one to replace it. This one feels like it is more durable and not as flimsy as the last one.

Register your warranty and sign up for an idea-filled newsletter at americanstandard.com/warranty.

Find installation videos at
youtube.com/americanstandard.

WANT MORE INFO?
For questions or help call us at 800-442-1902, or visit americanstandard.com

American Standard Elevate Shower Bases Owner’s Manual

Thank you for buying an American Standard bath or shower product.
We’re so grateful you did, and you will be too. Not just while you’re waking up each morning, but also every time a dirty gardener, sweaty soccer player, or muddy dog gets cleaned up. How do we know? Just like you, we’ve lived with that same beautiful chaos called life for almost 150 years. We believe that while every home should appreciate in value, we never forget the sentimental value that grows from enjoying life in the heart of home— your kitchen and bath. That’s why we love your stories and ideas; they help us innovate with products that make your life easier.

Or, visit americanstandard-us.com/bathroom/shower-bases to watch video, view/download installation manuals or learn more about your product.

Have a question or need help on install?
For questions or help on installation call us at 800-442-1902.

For a copy of our warranty in additional languages, please visit Americanstandard.com

INSTALLATION INSTRUCTIONS

Thank you for selecting American Standard – the benchmark of fine quality for over 150 years. To ensure this product is installed properly, please read these instructions carefully before you begin. Certain installations may require professional help.

INSTALLATION PREPARATION

• Please unpack carefully and identify all parts needed for installation by using the Box Contents as a reference.
  Inspect the product and report any damages or missing parts immediately to customer care by calling 800-442-1902. Follow the prompts for consumer/bathing.
  NOTE: Take extra care in handling edges and surfaces of bases. Use only non abrasive cloths to avoid scratching.
• The Elevate Base dimensions are nominal and meant for a standard alcove. Please measure your alcove to determine if the Elevate Base will work in your alcove prior to installation.
  

  A8014T RHO/LHO 60 X 30	A8017T-CO.011 38 X 38 Corner
  A8016T-CO.011 36 X 36 Corner	A8015T-CO 48 X 30 Alcove

• Ensure adequate wall support is provided to area where base is to be installed.
• Wear protective equipment during installation to avoid injury.
• Please keep these instructions for after care and customer service details.

BOX CONTENTS

• 60 X 30 RHO/LHO A8014T 10 Clips
• 36 X 36 Corner A8016T-CO 6 Clips
• 38 X 38 Neo Angle A8017T-CO 6 Clips
• 48 X 30 Alcove A8015T-CO 8 Clips
• Trench/Drain Plate

RECOMMENDED TOOLS AND MATERIALS

Level	Tape Measure	Square	Screwdriver
Pipe Wrench	Caulking Gun	Slip Joint Pliers	Personal Safety Equipment
Standard Woodworking Tools	Pencil

MATERIALS
Exterior Rated Screws
Silicone Sealant
Drop Cloth
OPTIONAL: Mortar Mix or Grout

BEFORE YOU BEGIN
Inspect your product thoroughly before installing. Take extra care in handling surfaces of the base and use only non-abrasive cloths to avoid scratching. Observe all local plumbing and building codes.

INSTALLATION INSTRUCTIONS

IMPORTANT GENERAL INFORMATION
This unit is best installed by two people.
Cover drain with tape prior to installation to prevent the loss of small parts.
Unpack your unit carefully and inspect for freight damage. Lay out and identify all parts using Box
Contents as a reference. Before discarding the carton check to see that no small hardware parts have fallen to the bottom of the box. If any parts are damaged or missing refer to the description noted in the instructions when inquiring about replacements.
When installing coordinating bath walls, additional studs may be required.
Refer to those installation instructions prior to installing base.
Take extra care when driving nails or screws to avoid damaging the base.

1. INSTALLATION AND FRAMING INSTRUCTIONS
   The alcove opening dimensions should be at least 1/8″ (3mm) larger than dimensions shown on spec page for the model being installed.
   For the best fit, the opening measurements should be verified against the actual shower base received.
   
                                  Figure A
   1a. Ensure that the floor and stud walls are square and plumb on a level floor as shown in Figure A.
   Provide a 7″ x 7″ (178 x 178 mm) opening in the floor for the drain and refer to the product rough-in on the specification page for actual drain location.
2. INSTALLATION OF DRAIN ASSEMBLY
   
   Figure B
   2a. All of the shower bases require purchasing a round drain for use with a standard 2” (51 mm) plastic schedule 40 waste pipe. Figure B shows the typical drain assembly. Before installing drain into the shower base, remove strainer. (Ref. Figure B) This will be installed after shower base is in its final position.
   Cut the waste pipe height so that the drain body will fit snug in the shower base. Apply silicone sealant between the drain body and shower base.
   NOTE: Drain not included and must be purchased separately.
3. BASE INSTALLATION
   
                                         Figure C
   3a. Place base into position and check for level in several directions. (Figure C)
   NOTE: If base is not level, shim or level sub floor using optional mortar.
   NOTE: Rectangle base shown.
4. INSTALLATION OF BASE CLIPS
   
                                              Figure D
   4a. Once base is in place and level in several directions, attach supplied plastic clips evenly around the perimeter of alcove studs to the base flange and screw clip into stud. (Fig. D)
   NOTE: Reference “Box Contents” by model to determine how many clips are required.
5. FINISHED WALL
   
   Figure E
   5a. Tape over the strainer to protect the finish and prevent construction debris from entering the drain.
   Finish installation as shown in (Figure E)
   5b. Install wall material over shower base flange according to wall manufacturer instructions.
   Once wall material is installed, caulk around the areas where the wall meets the shower base.
   5c. Remove the tape over the strainer and place drain cover over the drain.

POST INSTALLATION CLEAN-UP

Remove all construction debris. Tile grout can be removed with a wooden popsicle stick or tongue depressor.
Do not use wire brushes or any other metal implement on bath surface.

Post installation clean-up generally can be completed using warm water and liquid dishwashing detergent.
Stubborn dirt or stains may be removed using granular Spic and Span® mixed with water.

Painter’s naphtha can be used to remove excess adhesives and/or wet oil-base paint.

AFTERCARE AND CLEANING

• Excessively hot water may cause surface damage.
• ARSH CHEMICALS SHOULD NEVER BE USED ON SHOWER BASE SURFACE. Clean after use with a mild liquid household detergent cleaner. Do not use Lestoil, Lysol Disinfectant (spray or concentrate), or Lysol Basin, Tub and Tile Cleaner, Windex, Mr. Clean, Dow Disinfectant Bathroom Cleaner, or cleaning products in aerosol cans.
• Do not use wire brushes, knives or sharp objects to remove stains, cigarette tar deposits, or other surface blemishes.
• Abrasive cleaners or powders must not be used, since they will dull the surface. If the glossy surface loses its sheen, dulled areas or light scratches can be restored by rubbing with a white “automotive type” polishing compound and waxing with a “liquid wax.”
• Do not wax areas where you walk or stand.
• Do not allow nail polish remover, acetone, dry cleaning fluid, paint remover or other solvents to come into contact with the surface.
• Clean the surrounding surface immediately after using caustic drain cleaners.
• Burning cigarettes will damage the surface.
• Should damage to the fixture occur, repairs can be made quickly and easily. Your distributor or builder can provide details.
  Spic And Span® Is A Registered Trademark Of The Spic And Span Company

WARRANTY

AS AMERICA, INC. 10 YEAR WARRANTY FOR SHOWER BASES AND BATHTUBS
Residential Warranty: AS America, Inc. (“American Standard”) warrants this product against defects in materials and workmanship under normal residential use for TEN (10) years by the original consumer-purchaser commencing from the date of purchase.

Commercial Warranty: American Standard warrants this product against defects in materials and workmanship under normal commercial use for THREE (3) years by the original business-purchaser commencing from the date of purchase.

Non-Transferrable: This warranty is provided for the exclusive benefit of the original consumer-purchaser or business-purchaser. This warranty is non-transferable, including, but not limited, to any subsequent purchasers or owners. The sole exception to the non-transferability of this warranty is for products purchased by a plumber, contractor or similar service provider, in which case this warranty extends to the first residential or commercial property owner on whose behalf the product was purchased for installation.

Geographic Limitation: This warranty applies only to products installed in the United States of America, Canada or Mexico.

Option to Repair or Replace: If a defect arises and a valid claim is received during the warranty period, American Standard will, at its option, either repair or replace the defective product free of charge. The decision whether to repair or replace is determined by American Standard in its sole discretion. Proof of purchase (original sales receipt) must be provided to American Standard with all warranty claims.

This warranty only applies to American Standard StruXure™ Tubs and Shower Bases. Unless otherwise specified, all other American Standard options and accessories are covered by the AS AMERICA, INC. ONE YEAR LIMITED WARRANTY, which warrants against defects in material and workmanship for one (1) year from the date of first purchase.

EXCLUSIONS AND LIMITATIONS

This warranty only applies to products purchased after April 1, 2021.

This warranty only applies to products purchased through an authorized American Standard dealer or re-seller.

This warranty does not apply to defects or damage caused by non-genuine American Standard parts, installation error, product abuse, product misuse, improper maintenance, improper care or cleaning, improper repair or installation, and/or movement or transfer of the product from its original installation location (whether performed by the owner, a plumber, a contractor, a service company, or anyone else). Because improper care and cleaning can cause significant damage to the product, it is strongly recommended that you follow the Care and Cleaning Instructions (as well as all other instructions) that accompanied the product.

American Standard is not responsible for labor charges and/or damage incurred during installation, repair or replacement. In no event will
American Standard be liable for the cost of repair or replacement of any installation materials, including, but not limited to, tile or marble.

This warranty does not apply to deterioration through normal wear and tear and the expense of normal maintenance.

American Standard does not warrant that this product and/or its installation complies with local code requirements. American Standard recommends that you consult with a plumbing contractor about local code requirements.

TO THE EXTENT PERMITTED BY LAW, THIS WARRANTY IS EXCLUSIVE AND IN LIEU OF ALL OTHER WARRANTIES, WHETHER ORAL OR WRITTEN, STATUTORY, EXPRESS OR IMPLIED. AMERICAN STANDARD HEREBY EXCLUDES SPECIAL, INCIDENTAL AND CONSEQUENTIAL DAMAGES FOR ANY BREACH OF ANY EXPRESS OR IMPLIED WARRANTY APPLICABLE TO THIS PRODUCT.

Some states do not allow the exclusion or limitation of incidental or consequential damages, so the above limitations and exclusions may not apply to you. This warranty gives you specific legal rights, and you may also have other rights which vary from state to state (or province, as applicable).

OBTAINING WARRANTY SERVICE
If you believe that you have a warranty claim, contact American Standard, either through an authorized AS America, Inc. dealer or re-seller, by writing to the addresses below, or visiting the website below:

UNITED STATES
American Standard Brands
30 Knightsbridge Road, Suite 301
Piscataway, New Jersey 08854
Attention: Director of Customer Care
For residents of the United States,
warranty information may also be obtained by calling
the following toll free number: (800) 442-1902
www.americanstandard.com

CANADA
LIXIL Canada, Inc.
5900 Avebury Rd. Mississauga, Ontario
Canada L5R 3M3
Toll Free: (800) 387-0369
www.americanstandard.ca

MEXICO
American Standard B&K Mexico
S. de R.L. de C.V.
Via Morelos #330
Col. Santa Clara
Ecatepec 55540 Edo. Mexico
Toll Free: 01-800-839-1200
www.americanstandard.com.mx

Please be sure to provide all pertinent information regarding your claim, including your sales receipt, a complete description of the problem, the product, model number, color, finish, purchase date, and from whom the product was purchased.
For other information, or to obtain the name and address of the service and repair facility nearest you, call (800) 442-1902 (in the United States); (800) 387-0369 (in Canada) and 01-800-839-1200 (in Mexico).
THIS WARRANTY IS NOT TRANSFERABLE FROM ORIGINAL CONSUMER PURCHASER.

TELL US WHAT YOU THINK!

Please leave us a product review or story at americanstandard.com/reviews

Register your warranty and sign up for an idea-filled newsletter at americanstandard.com/warranty.
Find installation videos at youtube.com/americanstandard.

WANT MORE INFO?

For questions or help call us at 800-442-1902, or visit americanstandard.com

Ovalyn™ Undercounter Sink

❏ 0495.221 Unglazed rim
❏ 0495.300 Glazed underside (made to order)

• Classic oval undermount sink
• Unglazed rim
• Made from vitreous china
• Front overflow
• Supplied with mounting kit (047194-0070A) and template
  
  SEE REVERSE FOR ROUGHING-IN DIMENSIONS

Nominal Dimensions

17-1/8″ x 14-1/8″ (435 x 359mm

Bowl size:

15-1/16″ (382mm) wide
12-1/16″ (306mm) front to back
5-1/2″ (140mm) deep

❏ 0496.221 Unglazed rim
❏ 0496.300 Glazed underside (made to order)

Nominal Dimensions

19-1/4″ x 16″ (489 x 406mm)

Bowl size:

17″ (432mm) wide
14″ (356mm) front to back
5-1/2″ (140mm) deep

❏ 0497.221 Unglazed rim
❏ 0497.300 Glazed underside

Nominal Dimensions

21-1/2″ x 17-3/8″ (546 x 441mm)

Bowl size:

19″ (483mm) wide
15-3/8″ (391mm) front to back
5-1/2″ (140mm) deep

Compliance Certifications –
Meets or Exceeds the Following Specifications:

• ASME A112.19.2M for Vitreous China Fixtures
• CAN/CSA B45 series

Compliance Certifications –

Meets or Exceeds the Following Specifications:

• ASME A112.19.2M for Vitreous China Fixtures
• CAN/CSA B45 series

NOTES:

* DIMENSIONS SHOWN FOR LOCATION OF SUPPLIED AND “P” TRAP ARE SUGGESTED.
▼ UNDERCOUNTER MOUNTING KIT SUPPLIED WITH SINK. PLEASE NOTE MINIMUM INTERIOR CLEARANCE DIMENSION (K). FITTINGS NOT INCLUDED AND MUST BE ORDERED SEPARATELY. USE ENCLOSED TEMPLATE FOR COUNTERTOP CUTOUT SEALING COMPOUND SUPPLIED BY OTHERS.

IMPORTANT:

Dimensions of fixtures are nominal and may vary within the range of tolerances established by ANSI Standard A112.19.2. These measurements are subject to change or cancellation. No
responsibility is assumed for use of superseded or voided pages

MEETS THE AMERICANS WITH DISABILITIES ACT GUIDELINES AND ANSI A117.1 ACCESSIBLE AND USEABLE BUILDINGS AND FACILITIES – CHECK LOCAL CODES.
Countertop 864mm (34″)
from finished floor. Lavatory installed 76mm (3″
) from front edge of countertop. Countertop thickness to be 25mm (1″) maximum.

American Standard Toilet Flush Valve With Side-Mount

PRODUCT FEATURES:

• Hands-free infrared sensor-operated gear actuator with chrome plated metal housing
• Angled Sensor delivers reliable flush even with toilet seat in raised position
• Self-cleaning brass piston with integral wiper spring prevents clogging and valve run-on
• Electronic courtesy flush button
• Optional Sanitary Flush: Automatic flush after 24 hours of non-use
• Object Detection Indicator: LED blinks when user or object is detected
• User in View Indicator: Green LED flashes 3 times after user is detected for 5 seconds
• Low Battery Indicator: Yellow LED flashes when batteries need to be replaced
• Easy Battery Replacement: Water does not need to be shut off to change batteries
• Chloramine-resistant EPDM seals
• No external volume adjustment
• Can be installed left or right handed
• Installation tools included

MODEL NUMBER:

• 6047SM.111 Manual Flush Valve with Side-Mount
  Operator for 1-1/2″ flushometer bowl, 1.1 gpf/4.2 Lpf
• 6047SM.121 Manual Flush Valve with Side-Mount
  Operator for 1-1/2″ flushometer bowl, 1.28 gpf/4.8 Lpf
• 6047SM.161 Manual Flush Valve with Side-Mount
  Operator for 1-1/2″ flushometer bowl, 1.6 gpf/6.0 Lpf

OPERATING PRESSURE:
25 psi (flowing)-80 psi (static)
FLOW REQUIREMENT:
25 gpm (94.6 L/min.)
BATTERY LIFE:
100,000 flushes (3+ years @ 3,000 flushes per month)
(4) “C” alkaline batteries included

ADJUSTABLE RANGE:
8″ to 48″ (32″ default)

RECOMMENDED SPECIFICATION:
Toilet flush valve includes sensor-operated gear actuator with metal casing. Brass valve body and cover with chrome finish. Features self-cleaning brass piston valve with integral wiper spring in bypass orifice to prevent clogging. Valve closes and does not need to be reset after loss of water pressure. Includes sweat solder kit with wall flange and cover tube. Vacuum breaker and angle stop with vandal resistant cap and back-flow protection included.

Roughing-in Dimensions

Note: The Critical Line (-C-L-) on Vacuum Breaker must typically be 6″ (152mm) minimum above fixture. Consult Codes for details.