MF971R
Quick Start Guide
ZTE CORPORATION
NO. 55, Hi-tech Road South, Shenzhen, P.R.China Postcode: 518057

Getting to Know Your Device

Appearance

The following figure is for your reference only.

1. Power key
   • Press and hold for about 1.5 seconds to power on/off your device.
   • Press and hold for about 8 seconds to restart your device.
2. WPS key
   Press and hold for 1.5 seconds to activate the WPS function.
3. Indicator light
4. Charging/micro-USB jack
5. micro-SIM card slot cover and reset hole

Indicator lights

Network skilled

Network

Connection Scenarios

The device allows multiple clients to surf on the Internet at the same time. The following figure is for your reference only. A micro-SIM card can be used to access the Internet.

Installing the micro-SIM Card

1. Open the micro-SIM card slot cover.
   NOTE:
   Do not remove the cover rudely, because it is connected with the device.
   
2. Install a micro-SIM card to the micro-SIM card slot.
   WARNING!
   To avoid damage to the device, do not use any other kind of SIM card, or any non-standard micro-SIM card cut from a SIM card. You can get a standard micro-SIM card from your service provider.
   
3. Close the micro-SIM card slot cover.

Connecting to Your Device

Using Wi-Fi

1. Power on your device.
2. Ensure that your computer or other client devices have enabled Wi-Fi, and search for available wireless networks.
   NOTE:
   Refer to your Wi-Fi-enabled client device manual for further details on how to search for wireless networks. If you use a computer, you need to set your computer to obtain an IP address automatically.
3. Select the Wi-Fi name (SSID) of your device, and click Connect.
4. Enter the Wi-Fi password if necessary, and click OK.
   NOTE:
   Refer to the chapter Getting to Know the Wi-Fi SSID and Password to get the default Wi-Fi SSID and password.
5. Wait until the client device is connected to your device successfully.

Using a USB Cable

1. Connect a computer to your device with a USB cable.
2. Power on your device. The operating system detects and identifies new hardware and automatically installs the software.
3. Wait until the computer is connected to your device successfully.

Getting to Know the Wi-Fi SSID and Password

You can view the label on the device to get the default Wi-Fi SSID and password.

Logging in to the 4G Mobile Hotspot Configuration Page

1. Ensure that the connection between your device and the client device is correct.
2. Launch the Internet browser and enter http://192.168.0.1 or http://ufi.ztedevice.com in the address bar.
3. Enter the password to log in to the 4G Mobile Hotspot configuration page.
   NOTE:
   View the label on the device to get the default password.

Changing the Wi-Fi SSID or Password

1. Log in to the 4G Mobile Hotspot configuration page.
2. Select Wi-Fi Settings.
3. Change the Network Name (SSID) or the Password in the Main SSID area.
4. Click Apply.

Accessing the Internet

After a client device is successfully connected to your device, you can access the Internet in Automatic or Manual mode. The default mode is Automatic.

Mode	Operation
Automatic	Your device is automatically connected to the Internet, and you can surf on the Internet through the client.
Manual	1. Log in to the 4G Mobile Hotspot configuration page. 2. Select network Settings > Connection Mode > Manual, and then click Apply. 3. Click to return to the home page, and click

NOTES:
To change the current connection setting, please disconnect from the Internet first.

• To modify the parameters of your device, log in to the 4G
• Mobile Hotspot configuration page.

Configuring Your PC

The following describes how to configure the Internet Protocol in Windows for your Wi-Fi connection.

1. Right-click Network and select Properties.
2. Select Change adapter settings.
3. Right-click Wireless Network Connection and select Properties.
4. Select Internet Protocol Version 4 (TCP/IPv4), and click Properties.
5. Select Obtain an IP address automatically and Obtain DNS server address automatically, and click OK.

Warning and Notice

To the User

• If inadequately shielded, some electronic devices, for example, the electronic system of vehicles, may be affected by the electromagnetic interference caused by the device. Consult the manufacturers of such devices before using the device if necessary.
• Operating the device may interfere with medical instruments such as hearing aids and pacemakers. Always keep the device more than 20 centimeters away from such medical instruments when your device is powered on. Power off the device if necessary. Consult a physician or the manufacturers of medical instruments before using the device if necessary.
• Be aware of the usage limitation when using the device at places such as oil warehouses or chemical factories, where there are explosive gases or explosive products being processed. Power off the device if necessary.
• Do not use electronic transmission devices in aircraft, at petrol stations or in hospitals. Observe and obey all warning signs, and power off the device in these conditions.
• Do not touch the inner antenna area unless necessary. Otherwise, the performance of the device may be affected.
• Do not use the device in an enclosed environment or where heat dissipation is poor. Prolonged work in such space may cause excessive heat and raise ambient temperature, which may lead to automatic shutdown of the device for your safety.
  In the case of such an event, cool the device in a well-ventilated place before turning on for normal use.
• Keep the device out of the reach of small children. The device may cause an injury if used as a toy.
• When the device is operating, do not touch the metallic parts. Failing to do so may cause burns.
• Use original accessories or accessories that are authorized. Using any unauthorized accessories may affect the performance of the device and violate the related national regulations about telecom terminals.
• Avoid using the device near or inside metallic constructions or establishments that can emit electromagnetic waves, because signal reception may be affected.
• The device is not waterproof. Keep the device dry and store it in a shady and cool place.
• Do not use the device immediately after a sudden temperature change, because dew may be generated inside and outside the device. Do not use it until it becomes dry.
• Handle the device carefully. Do not drop, bend or strike it. Otherwise, the device may be damaged.
• Only qualified personnel can dismantle and repair the device.
• The humidity between 5% and 95% is recommended.
• Do not connect the charger while using the device for a long period. Failing to do so will trigger the protection mechanism of the battery, and the battery will not be charged. If you want to charge the battery, please reconnect the charger.
• Do not connect the charger while using the device for a long period or use the device and battery in non-operating temperatures. Failing to do so will shorten battery life or cause battery swelling or leakage. If the battery shows signs of swelling or leakage, please stop use immediately.
• For pluggable equipment, the socket-outlet shall be installed near the equipment and shall be easily accessible.

Battery Safety

WARNING!
The battery is not removable. Removal may cause fire or explosion.

• Using a ZTE-unapproved or incompatible battery, charger, or power adapter may damage your device, shorten its lifespan or cause a fire, explosion, or other hazards.
• The recommended operating temperatures are 0 °C to 35 °C and the storage temperatures are -20 °C to +45 °C. Extreme
  temperatures can damage the device and reduce the charging capacity and lifespan of your device and battery.
• Do not change or replace the built-in rechargeable battery in your device by yourself. The battery can only be changed or
  replaced by ZTE or ZTE authorized service provider.
• Do not place the device or the battery in or near heating equipment, such as microwave ovens, stoves, or radiators.
  Keep the device and the battery away from excessive heat and direct sunlight. If not, the device or the battery may overheat
  and cause an explosion or fire.
• Do not disassemble, squeeze or puncture the device, as this can cause an explosion or fire.
• Do not throw the device into a fire to avoid an explosion.
• Please disconnect the charger when the battery is fully charged. Overcharging may shorten the battery life.
• When not using the device for a long period, please charge the battery about half and then store the device in a cool dry place.
• If the battery damages or shows signs of swelling or leakage, please stop use immediately and contact ZTE or ZTE authorized service provider for a replacement.

Limited Warranty

This warranty does not apply to defects or errors in the product caused by:

i. Reasonable abrasion.
ii. End users’ failure to follow ZTE’s installation, operation, or maintenance instructions or procedures.
iii. End users’ mishandling, misuse, negligence, or improper
installation, disassembly, storage, servicing or operation of the product.
iv. Modifications or repairs not provided by ZTE or a ZTEcertified individual.
v. Power failures, surges, fire, flood, accidents, and actions of third parties or other events outside ZTE’s reasonable control.
vi. Usage of third-party products or usage in conjunction with third-party products if such defects are due to the combined
usage.
vii. Any other cause beyond the range of normal usage intended for the product. End users have no right to reject or return the  product, or receive a refund for the product from ZTE under the above-mentioned situations.
This warranty is end users’ sole remedy and ZTE’s sole liability for defective or nonconforming items and is in lieu of all other
warranties, expressed, implied or statutory, including but not limited to the implied warranties of merchantability and fitness for
a particular purpose, unless otherwise required under the mandatory provisions of the law.

Limitation of Liability
ZTE shall not be liable for any loss of profits or indirect, special,  incidental, or consequential damages resulting from or arising out of or in connection with using of this product, no matter whether or not ZTE had been advised, knew, or should have known of the possibility of such damages, including, but not limited to lost profits, interruption of business, cost of capital, cost of substitute facilities or product, or any downtime cost.

LEGAL INFORMATION

Copyright © 2020 ZTE CORPORATION.
All rights reserved.
No part of this publication may be excerpted, reproduced, translated, or utilized in any form or by any means, electronic or mechanical, including photocopying and microfilm, without the prior written permission of ZTE Corporation. The manual is published by ZTE Corporation. We reserve the right to make modifications to print errors or update specifications without prior notice.

Version No.: R1.0

Troubleshooting

Getting More Help
You can get help by:
• Sending an email to mobile@zte.com.cn
• Visiting www.ztedevices.com

FCC Regulations:

This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.

This device has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC
Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the  following measures:

-Reorient or relocate the receiving antenna.
-Increase the separation between the equipment and receiver.
-Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
-Consult the dealer or an experienced radio/TV technician for help.
Caution: Changes or modifications not expressly approved by the party responsible for compliance could void the user’s
authority to operate the equipment.

FCC RF Exposure Information (SAR)
This device is designed and manufactured not to exceed the emission limits for exposure to radiofrequency (RF) energy set
by the Federal Communications Commission of the United States.

During SAR testing, this device is set to transmit at its highest certified power level in all tested frequency bands and placed in positions that simulate RF exposure in usage against the head with no separation, and near the body with the separation of 10 mm. Although the SAR is determined at the highest certified power level, the actual SAR level while operating can be well below the maximum value. This is because the device is designed to operate at multiple power levels so as to use only the power required to reach the network. In general, the closer you are to a wireless base station antenna, the lower the power output.

The exposure standard for wireless employs a unit of measurement known as the Specific Absorption Rate, or
SAR. The SAR limit set by the FCC is 1.6W/kg.

Tests for SAR are conducted using standard operating positions accepted by the FCC with the device transmitting at its highest
certified power level in all tested frequency bands.

The FCC has granted an Equipment Authorization for this model device with all reported SAR levels evaluated as in compliance with the FCC RF exposure guidelines. SAR information on this model device is on file with the FCC and can be found under the Display Grant section of www.fcc.gov//oet//ea//fccid after searching on FCC ID: SRQMF971R.

For this device, the highest reported SAR value near the body is 1.09 W/kg.

While there may be differences between the SAR levels of various devices and at various positions, they all meet the government requirement.

SAR compliance for body operation is based on a separation distance of 10 mm between the unit and the human body. Carry this device, at least 10 mm away from your body to ensure RF exposure level compliance or lower to the reported level. To support body operation, choose the belt clips or holsters, which do not contain metallic components, to maintain a separation of 10 mm between this and your body.

ZTE MF971R Quick Start Guide

Getting to Know Your Device

Appearance

The following figure is for your reference only.

1. Power key
   • Press and hold for about 1.5 seconds to power on/off your device.
   • Press and hold for about 8 seconds to restart your device.
2. WPS key Press and hold for 1.5 seconds to activate the WPS function.
3. Indicator light
4. Charging/micro-USB jack
5. micro-SIM card slot cover and reset hole

Indicator lights

Connection Scenarios

The device allows multiple clients to surf on the Internet at the same time. The following figure is for your reference only.

A micro-SIM card can be used to access the Internet.

Installing the micro-SIM Card

1. Open the micro-SIM card slot cover.
   NOTE:
   Do not remove the cover rudely, because it is connected with the device.
   
2. Install a micro-SIM card to the micro-SIM card slot.
   WARNING!
   To avoid damage to the device, do not use any other kind of SIM cards, or any non-standard micro-SIM card cut from a SIM card. You can get a standard micro-SIM card from your service provider.
   
3. Close the micro-SIM card slot cover.

Connecting to Your Device

Using Wi-Fi

1. Power on your device.
2. Ensure that your computer or other client devices have enabled Wi-Fi, and search for available wireless networks.
   NOTE:
   Refer to your Wi-Fi-enabled client device manual for further details on how to search for wireless networks. If you use a computer, you need to set your computer to obtain an IP address automatically.
3. Select the Wi-Fi name (SSID) of your device, and click Connect.
4. Enter the Wi-Fi password if necessary, and click OK.
   NOTE:
   Refer to the chapter Getting to Know the Wi-Fi SSID and Password to get the default Wi-Fi SSID and password.
5. Wait until the client device is connected to your device successfully.

Using a USB Cable

1. Connect a computer to your device with a USB cable.
2. Power on your device. The operating system detects and identifies new hardware, and automatically installs the software.
3. Wait until the computer is connected to your device successfully.

Getting to Know the Wi-Fi SSID and Password

You can view the label on the device to get the default Wi-Fi SSID and password.

Logging in to the 4G Mobile Hotspot Configuration Page

1. Ensure that the connection between your device and the client device is correct.
2. Launch the Internet browser and enter http://192.168.0.1 or http://ufi.ztedevice.com in the address bar.
3. Enter the password to log in to the 4G Mobile Hotspot configuration page.
   NOTE:
   View the label on the device to get the default password.

Changing the Wi-Fi SSID or Password

1. Log in to the 4G Mobile Hotspot configuration page.
2. Select Wi-Fi Settings.
3. Change the Network Name (SSID) or the Password in the Main SSID area.
4. Click Apply.

Accessing the Internet

After a client device is successfully connected to your device, you can access the Internet in Automatic or Manual mode. The default mode is Automatic.

NOTE: 

• To change the current connection setting, please disconnect from the Internet first.
• To modify the parameters of your device, log in to the 4G Mobile Hotspot configuration page.

Configuring Your PC

The following describes how to configure the Internet Protocol in Windows for your Wi-Fi connection.

1. Right-click Network and select Properties.
2. Select Change adapter settings.
3. Right-click Wireless Network Connection and select Properties.
4. Select Internet Protocol Version 4 (TCP/IPv4), and click Properties.
5. Select Obtain an IP address automatically and Obtain DNS server address automatically, and click OK.

Warning and Notice

To the User

• If inadequately shielded, some electronic devices, for example, the electronic system of vehicles, may be affected by the electromagnetic interference caused by the device. Consult the manufacturers of such devices before using the device if necessary.
• Operating the device may interfere with medical instruments such as hearing aids and pacemakers. Always keep the device more than 20 centimeters away from such medical instruments when your device is powered on. Power off the device if necessary. Consult a physician or the manufacturers of medical instruments before using the device if necessary.
• Be aware of the usage limitation when using the device at places such as oil warehouses or chemical factories, where there are explosive gases or explosive products being processed. Power off the device if necessary.
• Do not use electronic transmission devices in aircraft, at petrol stations or in hospitals. Observe and obey all warning signs, and power off the device in these conditions.
• Do not touch the inner antenna area unless necessary. Otherwise the performance of the device may be affected.
• Do not use the device in an enclosed environment or where heat dissipation is poor. Prolonged work in such space may cause excessive heat and raise ambient temperature, which may lead to automatic shutdown of the device for your safety. In the case of such an event, cool the device in a well-ventilated place before turning on for normal use.
• Keep the device out of the reach of small children. The device may cause an injury if used as a toy.
• When the device is operating, do not touch the metallic parts. Failing to do so may cause burns.
• Use original accessories or accessories that are authorized. Using any unauthorized accessories may affect the performance of the device and violate the related national regulations about telecom terminals.
• Avoid using the device near or inside metallic constructions or establishments that can emit electromagnetic waves, because signal reception may be affected.
• The device is not waterproof. Keep the device dry and store it in a shady and cool place.
• Do not use the device immediately after a sudden temperature change, because dew may be generated inside and outside the device. Do not use it until it becomes dry.
• Handle the device carefully. Do not drop, bend or strike it. Otherwise the device may be damaged.
• Only qualified personnel can dismantle and repair the device.
• The humidity between 5% and 95% is recommended.
• Do not connect the charger while using the device for a long period. Failing to do so will trigger the protection mechanism of the battery, and the battery will not be charged. If you want to charge the battery, please reconnect the charger.
• Do not connect the charger while using the device for a long period or use the device and battery in non-operating temperature. Failing to do so will shorten battery life or cause battery swelling or leakage. If the battery shows signs of swelling or leakage, please stop use immediately.
• For pluggable equipment, the socket-outlet shall be installed near the equipment and shall be easily accessible.

Battery Safety

WARNING!

The battery is not removable. Removal may cause fire or explosion.

• Using ZTE-unapproved or incompatible battery, charger or power adapter may damage your device, shorten its lifespan or cause a fire, explosion or other hazards.
• The recommended operating temperatures are 0 °C to 35 °C and the storage temperatures are -20 °C to +45 °C. Extreme temperatures can damage the device and reduce the charging capacity and lifespan of your device and battery.
• Do not change or replace the built-in rechargeable battery in your device by yourself. The battery can only be changed or replaced by ZTE or ZTE authorized service provider.
• Do not place the device or the battery in or near heating equipment, such as microwave ovens, stoves or radiators. Keep the device and the battery away from excessive heat and direct sunlight. If not, the device or the battery may overheat and cause explosion or fire.
• Do not disassemble, squeeze or puncture the device, as this can cause explosion or fire.
• Do not throw the device into a fire to avoid explosion.
• Please disconnect the charger when the battery is fully charged. Overcharging may shorten the battery life.
• When not using the device for a long period, please charge the battery about half and then store the device in a cool dry place.
• If the battery damages or shows signs of swelling or leakage, please stop use immediately and contact ZTE or ZTE authorized service provider for replacement.

LEGAL INFORMATION

Copyright © 2020 ZTE CORPORATION.
All rights reserved.
No part of this publication may be excerpted, reproduced, translated or utilized in any form or by any means, electronic or mechanical, including photocopying and microfilm, without the prior written permission of ZTE Corporation.
The manual is published by ZTE Corporation. We reserve the right to make modifications on print errors or update specifications without prior notice.

Version No.: R1.0

Troubleshooting

Getting More Help

You can get help by:

• Sending an email to mobile@zte.com.cn
• Visiting www.ztedevices.com

Specific Absorption Rate (SAR)

Your mobile device is a radio transmitter and receiver. It is designed not to exceed the limits for exposure to radio waves recommended by international guidelines. These guidelines were developed by the independent scientific organization ICNIRP and include safety margins designed to assure the protection of all persons, regardless of age and health.

The guidelines use a unit of measurement known as Specific Absorption Rate, or SAR. The SAR limit for mobile devices is 2 W/kg and the highest SAR value for this device when tested at the body was 1.505 W/kg* with 5 mm distance.

As SAR is measured utilizing the device’s highest transmitting power, the actual SAR of this device while operating is typically below that indicated above. This is due to automatic changes to the power level of the device to ensure it only uses the minimum power required to communicate with the network.

* The tests are carried out in accordance with EN 50566, EN 62209-2 and EN 50663.

Specification

CE Caution

Battery Caution

Risk of explosion if battery is replaced by an incorrect type. Dispose of used batteries according to the instructions.

USB Port

This product shall only be connected to a USB interface of version USB 2.0.

Proper Use

As described in this guide, your device can be used only in right location. If possible, please do not touch the antenna area on your device.

Disposal of Your Old Appliance

For this product’s recycling information based on WEEE directive, please send an e-mail to weee@zte.com.cn

EU DECLARATION OF CONFORMITY

Hereby, ZTE Corporation declares that the radio equipment type ZTE MF971R is in compliance with Directive 2014/53/EU.

The full text of the EU declaration of conformity is available at the following Internet address: https://certification.ztedevices.com

The device is restricted to indoor use only when operating in the 5150 to 5350 MHz frequency range.

ZTE CORPORATION
NO. 55, Hi-tech Road South, Shenzhen, P.R.China
Postcode: 518057

ZTE ZXHN H298Q Advanced Home Gateway

LEGAL INFORMATION

2021 ZTE CORPORATION.
The contents of this document are protected by copyright laws and in- ternational treaties. Any reproduction or distribution of this document or any portion of this document, in any form by any means, without the prior written consent of ZTE CORPORATION is prohibited. Additionally, the contents of this document are protected by contractual confidentiality obli- gations.
All company, brand and product names are trade or service marks, or registered trade or service marks, of ZTE CORPORATION or of their re- spective owners.

This document is provided “as is”, and all express, implied, or statutory warranties, representations or conditions are disclaimed, including without limitation any implied warranty of merchantability, fitness for a particular purpose, title or non-infringement. ZTE CORPORATION and its licensors shall not be liable for damages resulting from the use of or reliance on the information contained herein.
ZTE CORPORATION or its licensors may have current or pending intellectual property rights or applications covering the subject matter of this document. Except as expressly provided in any written license between ZTE CORPORATION and its licensee, the user of this document shall not acquire any license to the subject matter herein.
ZTE CORPORATION reserves the right to upgrade or make technical changes to this product without further notice.
Users may visit ZTE technical support website http://support.zte.com.cn to inquire about related information.
The ultimate right to interpret this product resides in ZTE CORPORATION.

Safety Precautions

NOTE: Before using the device, read the following safety precautions. ZTE bears no liability to the consequences incurred by violation of the safety instructions.

Usage Cautions

• Read all the safety cautions carefully before using the device.
• Only use the accessories included in the package, such as the power supply adapter.
• Do not extend the power cord, otherwise, the device will not work.
• The power supply voltage must meet the requirements of the device input voltage (The voltage fluctuation range is less than 10%).
• Keep the power plug clean and dry to prevent any risk of electric shock or other dangers.
• Disconnect all the cables during a lightning storm to prevent the device from being damaged.
• Power off and unplug the power plug when the device is not in use for a long time.
• Do not attempt to open the covers of the device. It is dangerous to do so when the device is powered ON.
•  Power off and stop using the device under the conditions such as, abnormal sound, smoke, and strange smell. Contact the service provider for maintenance if the device is faulty.

Environment Requirements

• Ensure proper ventilation to the device. Place the device away from direct sunlight.
• Keep the device ventilated and dry. Never spill any liquid on the device.
• Do not place any object on the device to prevent any deformation or damage to the device.
• Do not place the device near any source of heat or water.
• Keep the device away from any household appliances with strong magnetic or electric fields, such as microwave oven and refrigerator.

Cleaning Requirements

• Before cleaning, power off the device, and unplug all the cables connected to the device, such as power cable, optical fiber, and Ethernet cable.
• Do not use any liquid or spray to clean the device. Use a soft dry cloth.

Environment Protection

• Do not dispose the device or battery improperly.
• Observe the local regulations about the equipment disposal or treatment.

Environmental Information

The equipment you purchased has required the extraction and use of natural resources for its production. It may contain substances that are hazardous to people’s health and to the environment. To avoid putting such substances into our environment and to reduce pressure on our natural resources, we ask that you reuse or recycle your end-of-life equipment by using an accredited electronics take-back system.
The symbols below indicate that this product should be reused or recycled and not simply discarded. Please locate and use an appropriate reuse and recycling site.
If you need more information on collection, reuse, and recycling systems, contact your local or regional waste administration. You may also contact your equipment provider for more information on the environmental performance of these products.

Product Specifications

The ZXHN H298Q is an advanced home gateway with VoIP that supports 2033Mbps Dual-band concurrent 11ac Wi-Fi. It provides High Speed Internet, IPTV and Voice over IP services through GE uplink. Those services are delivered by the gateway on your home network to the PCs, STBs, phones, gaming devices and so on via the integrated interfaces: Ethernet, Wi-Fi, FXS ports.

NOTE: Please use the power adapter provided by the manufacturer.

Hardware Description

Front panel

Figure 3-1 shows the front panel of the ZXHN H298Q, and Figure 3-2 shows the indicators.

Figure 3-2 The indicators

Side panel

Figure 3-3 shows the interfaces on the side panel of the ZXHN H298Q. Figure 3-3 The Side Panel

Rear panel

Figure 3-4 shows the interfaces and buttons on the rear panel of the ZXHN H298Q.
Figure 3-4 The Rear Panel

Hardware Connection

Figure 4-1 shows the devices that are connected to interfaces of the ZXHN H298Q.
Figure 4-1 Cable Connection

After the devices are connected to the ZXHN H298Q device, press the power button. When the corresponding indicators on the front panel are On, you can enjoy various services provided by the service provider.
The factors affecting the wireless network coverage range include the location of the product, the distance between the product and a wireless terminal, number of obstacles, obstacle material, and density, and interference source. It is recommended that you place the product in accordance with the following principles to maximize the strength of wireless signals.

• The product should be far away from the objects affecting wireless signal propagation, for example, an object with a high reflectivity such as a metallic object or a mirror.
• The product should be far away from an electrical appliance with a strong magnetic or electric field, for example, a microwave oven, a refrigerator, a wireless router, a cordless phone, or a Bluetooth product.
• The product should be installed on the same floor as the applied area.
• Do not put other objects on the product. Try to reduce the number of obstacles between the product and a wireless terminal.
• Horizontally place the product in the middle of the applied area and do not put it in a corner.
• Do not place the product at a high position while it is placed horizontally. The recommended height is 1.2 to 1.5 meters.

Troubleshooting

The Power indicator on the front panel is off after the power button is pressed.

• The power switch does not turn on.
• The power adapter is not correctly connected to the device. Be sure to use the power adapter supplied with the device.
• The Broadband indicator on the front panel is off after the device is powered on.
• The WAN link is not established.
• The Ethernet cable is not correctly connected to the WAN interface.
• Please contact the service provider for help. Unable to connect to the network..
• Check that the Ethernet cable is correctly connected to the WAN interface and the Ethernet cable is correctly connected to the LAN interface.
• Check that the WAN indicator on the front panel is on and the Internet indicator on the front panel is solid green or flashing green.

Restore the factory default settings.
After the power is on, use a needle to press the Reset button for over 5 seconds to restore the default factory setting.

FCC Statement

This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.

FCC RF Radiation Exposure Statement

This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with a minimum distance of 20cm between the radiator and any part of your body.
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:

1. This device may not cause harmful interference.
2. This device must accept any interference received, including interference that may cause undesired operation.

Caution! The user is cautioned that changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.

ISED Warning Statement
This device contains license-exempt transmitter(s)/receiver(s) that comply with Innovation, Science, and Economic Development Canada’s license-exempt RSS(s). Operation is subject to the following two conditions:

1. This device may not cause interference.
2. This device must accept any interference, including interference that may cause undesired operation of the device.

The device for operation in the band 5150–5250 MHz is only for indoor use to reduce the potential for harmful interference to co-channel mobile satellite systems
Les dispositifs fonctionnant dans la bande de 5 150 à 5 250 MHz sont réservés uniquement pour une utilisation à l’intérieur afin de réduire les risques de brouillage préjudiciable aux systèmes de satellites mobiles utilisant les mêmes canaux.
This equipment complies with ISED RSS-102 radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with a minimum distance of 20cm between the radiator and any part of your body. Pour se conformer aux exigences de conformité CNR 102 RF exposition, une distance de séparation d’au moins 20 cm doit être maintenue entre l’antenne de cet appareil ettoutes les personnes.

Address: No.55, Hi-tech Road South,
Shenzhen, P.R.China /
Postcode: 518057
Tel: +86-755-26771900
URL: http://support.zte.com.rn
E-mail: support@zte.com.c.n

ZTE WiFi Router User Manual

LEGAL INFORMATION

Copyright © 2016 ZTE CORPORATION.

All rights reserved.

No part of this publication may be excerpted, reproduced, translated or utilized in any form or by any means, electronic or mechanical, including photocopying and microfilm, without the prior written permission of ZTE Corporation.

The manual is published by ZTE Corporation. We reserve the right to make modifications on print errors or update specifications without prior notice.

Version No. : R1.0
Edition Time: May 5, 2016

Getting To Know Your Device

Appearance

NOTE: Please use original extemal if necessary

Interface Description

Indicators

Indicator	State	Description
POWER	Blue on	Power is on and external power supply is working normally.
	Off	Power  is off or  external  power  supply  is working abnormally.
WIFI	Blue on	Wi-Fi    works transmission normally with  no    data
	Blue blinking	Wi-Fi     works     normally     with transmission data
	Off	Wi-Fi  works  abnormally function is disabled or   the   Wi-Fi
PHONE	Off	The phone is not in use.
	Blue blinking	The phone is ringing.
	Blue on	The phone is in calling.
SIG	Blue on	Signal strength is very good or good.
	Blue blinking	Signal strength is weak.
	Off	There is no signal.
2G/3G /4G	Red	The device  is turned on but not registered to the mobile network.
	Blue blinking	The   device   IS    connected   to   the   LTE network and data is being transferred .”
	Blue solid	The   device   is   regis1ered   LO    the   LTE network.
	Green Blinking	The  device  is connected  10 the  2G/3G network and data is being transferred
	Green solid	The  device  is registered  to  the  2G/3Gnetwork.
LAN	Green On	The LAN port is connected
	Green Blinking	The LAN port is connected with data transition
	Off	The network cable is not connected

NOTE: The phone function needs the network support.

Connecting Your Device

Follow the picture to connect your device .Please refer to the chaptar accessing the internet if you want to use the mobile network to please refer to use your home  phone .Youe need insert your (U) Sim card first .

CAUTION; Put your device at least 2 metars away from the connected phone, TV sets redio and other electronic device to avoid electronetic interference.

Configuring Your PC

The following procedure describes how to configure the Internet Protocol in the Windows 7 for your Wi-Fi connection.

1. Right-click Network and select Properties.
   
   
2. Select Change adapter settings.
   
   
3. Right-click Wireless Network Connection and select Properties
   
   
4. Select Internet Protocol Version 4 (TCP/IPv4) and click Properties
   
   
5. Select Obtain an IP address automatically and Obtain DNS server address automatically, and click OK
   
   

Accessing the Internet

Before accessing the Internet, please make sure that the following operations are finished.

• Your device is connected via a network cable or Wi-Fi.
• Your PC is configured.

To access the Internet:

Log in the CPE configuration page.

1. Launch the Internet browser and enter http://192.168.0.1 in the address bar. The login page appears.
   
2. Input the password and then click Login. The default password is admin.If you want to use your PC to connect to the Internet, please connect your PC to the LAN port via Ethernet cable and surf the Internet through your (U)SIM Card.
3. View the current mode on the left top of the CPE configuration page, and then click Change.
   
4. Select an operation mode which you want to use and then click Apply
   
    NOTE:“If you change the operation mode, the device will be restarted automatically.”
5. Set the detai l parameters for the operation mode.

Voice Function

Making a Call
You can make a call through (U)SIM card.

1. Pick up the handset.
2. Key in the telephone number.
3. You can either press the # key on the telephone to send the call, or wait 4-8 seconds for the call to be” connected automatically. The call will be connected.
    NOTE: “If there is no signal introduction. the radio signal is unavailable. Change the location of the device and make sure nothing is blocking it.”

Answering a Call

When the phone rings, pick up the handset to answer it. If the telephone has hands free function you” also can answer the call by pressing the Hands.free button. pressing the Hands-free button again to end the call.

WPS Function

Your device supports WPS function. You can use this function to connect the client to your device.

1. Power on your device, and enable the Wi-Fi function on your device.
2. Enable the WPS function. Please check the WPS Setting on the CPE Configuration Page.
3. Press the WPS button on your device to start Wi-Fi Protected Setup authentication process.
4. Enable the WPS function on your client to respond to this authentication process.
5. Follow the system prompts on your client to finish the connection.

Wireless Connection (Optional)

If you want to use Wi-Fi to connect your device, please refer to the following steps

1. Make sure that the Wi-Fi works normal. Please check the Wi-Fi Setting on the CPE configuration page or check the Wi-Fi indicator.
   
2. Power on your device. Use the Wi-Fi application on a client to search for available wireless networks.
   
   NOTE: “Set the client to obtain an IP address automatically. For the detailed procedure, refer to Configuring Your The client gets an IP address, for e..ample, 192.168.0.101.”
3. Select the SSID (wireless network name) of your device,and then click Connect
   
   NOTE; You can find the default SSID on of your device
4. Enter the password and then click OK
   
   NOTE: You may need to enter the password for the Wi-Fi connection .You can view the label on your device to get the default password
5. Wait until the client is connected to your device successfully

Troubleshooting

Voice Related Problems

Internet Related Problems

Others

Warning and Notice

To the Owner

• If inadequately shielded, some electronic devices may be affected by the electromagnetic interference caused by the device, such as the electronic system of vehicles. Consult the manufacturers of such devices before using the device if necessary
• Operating the device may interfere with medical instruments such as hearing aids and pacemakers. Always keep the device more than 20 centimetres away from such medical instruments when your device is turned on. Turn the device off if necessary. Consult a physician or the manufacturers of medical instruments before using the device if necessary.
• Be aware of the usage limitation when using the device at places such as oil warehouses or chemical factories, where there are explosive gases or explosive products being processed. Turn off the device if necessary.
• Do not use electronic transmission devices in aircrafts, at petrol stations or in hospitals. Observe and obey all warning signs, and turn off the device in these conditions.
• Do not touch the inner antenna area unless it is necessary. Otherwise the performance of the device may be affected.
• Keep the device out of the reach of little children. The device may cause an injury if used as a toy.
• When the device is operating, do not touch the metallic parts. Failing to do so may cause burns.

Using Your Device

• Use original accessories or accessories that are authorized. Using any unauthorized accessories may affect the performance of the device and violate the related national regulations about telecom terminals.
• Avoid using the device near or inside metallic structures or establishments that can emit electromagnetic waves, because signal reception may be affected.
• The device is not waterproof. Keep the device dry and store it in a shady and cool place.
• Do not use the device immediately after a sudden temperature change. In such case, dew may be generated inside and outside the device, so do not use it until it becomes dry.
• Handle the device carefully. Do not drop, bend or strike it. Otherwise the device may be damaged.
• Only qualified personnel can dismantle and repair the device.
• An operating temperature between -10°C and +45°C and humidity between 5% and 95% are recommended.

Limited Warranty

This warranty does not apply to defects or errors in the product caused by:

1.  Reasonable abrasion.
2. End users’ failure to follow ZTE’s installation, operation or maintenance instructions or procedures.
3. End users’ mishandling, misuse, negligence, or improper installation, disassembly, storage, servicing or operation of the product.
4. Modifications or repairs not provided by ZTE or a ZTE-certified individual..
5. Power failures, surges, fire, flood, accidents, and actions of third parties or other events outside ZTE’s reasonable control.
6. Usage of third-party products, or usage in conjunction with third-party products if such defects are due to the combined usage.
7. Any other cause beyond the range of normal usage intended for the product.
   End users have no right to reject or return the product, or receive a refund for the product from ZTE under the above-mentioned situations.

This warranty is end users’ sole remedy and ZTE’s sole liability for defective or nonconforming items, and is in lieu of all other warranties, expressed, implied or statutory, including but not limited to the implied warranties of merchantability and fitness for a particular purpose, unless otherwise required
under the mandatory provisions of the law.

Limitation of Liability

ZTE shall not be liable for any loss of profits or indirect, special, incidental or consequential damages resulting from or arising out of or in connection with using of this product, no matter whether or not ZTE had been advised, knew or should have known of the possibility of such damages, including, but not limited to lost profits, interruption of business, cost of capital, cost of substitute facilities or product, or any downtime cost.

FCC Caution:

This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions:
This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.
Note: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.
  Any Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.

This equipment complies with FCC radiation exposure limits set forth for an
uncontrolled environment. This equipment should be installed and operated withminimum distan ce 20cm between the radiator & your body.

ZTE MF920U MiFi Router WiFi Device

Getting to Know Your Device

Appearance
The following figure is for your reference only.

1. Charging/micro-USB jack
2. Indicator light
3. Power key
   1. Press and hold for about 2 seconds to power on/off your device.
   2. Press and hold for about 10 seconds to power off your device, if it is in abnormal status. And then press and hold for about 2 seconds to power on your device again.
4. WPS key
   Press and hold for about 2 seconds to activate the WPS function.
5. micro-SIM card slot and reset hole
   Reset hole: Press and hold for about 2 seconds to restore your device to the factory settings.

Indicator lights 

Indicator	Status	Description
Battery	Red solid / blinking	The battery is low. Please charge the battery.
	Green blinking	The battery is being charged.
	Green solid	The battery level is middle or high.
	Light off	Your device is powered off and not being charged.
Wi-Fi	Blue solid	Wi-Fi is active.
	Blue blinking	WPS is active.
	Light off	Wi-Fi is off.
SMS	Blue blinking	You have new messages or the message storage is full.
	Light off	There is neither an unread message nor a new message.
Network	Red	The device is in error status l  The device is not registered to the mobile network. l  There is no micro-SIM card inserted. l  There is no network service available.
	Green solid	The device is registered to the 2G/3G mobile network.
	Green blinking	The device is connected to the 2G/3G mobile network and data is being transferred.
	Blue solid	The device is registered to the 4G LTE network.
	Blue blinking	The device is connected to the 4G LTE network and data is being transferred.

MIFI device is able to connect up to 6 WIFI enable devices.

Installing Your Device

1. Open the micro-SIM card slot cover.
2. Install a micro-SIM card to the micro-SIM card slot.
   WARNING!
   Your device does not support SIM cards, nano-SIM cards or any other non-standard micro-SIM cards. To avoid damage to the device, do not use those cards or any card holders.
3. Close the micro-SIM card slot cover.

Connecting to Your Device

Using Wi-Fi 

1. Power on your device.
2. Ensure that your computer or other client devices have enabled Wi-Fi, and search for available wireless networks.
3. Select the Wi-Fi name (SSID) of your device, and click Connect.
4. Enter the Wi-Fi password if necessary, and click OK.
5. Wait until the client device is connected to your device successfully

Logging in to the 4G Mobile Hotspot Configuration Page 

1. Ensure that the connection between your device and the client device is correct.
2. Launch the Internet browser and enter http://192.168.0.1 or http://ufi.ztedevice.com in the address bar.
3. Enter the password to log in to the 4G Mobile Hotspot configuration page.
   NOTE:
   You can view the label on the device to get the default password.

ZTE Cymbal 2 Prepaid Phone User Guide

Getting to Know Your Phone

Setting Up Your Phone

Power off your phone before installing or removing the Nano-SIM card, the micro SDHC card (optional), or the battery.

WARNING!
To avoid damage to the phone, do not use any other kind of SIM cards, or any non-standard nano-SIM card cut from a SIM card. You can get a standard Nano-SIM card from your service provider.

1. Place your finger in the slot at the lower left of the back cover to lift and remove the cover.
   
2. If the battery is installed already, remove it.
3. Hold your nano-SIM card with the metal contacts facing down and slide it into the nano-SIM card slot.
   
4. Hold your micro SDHC card with the metal contacts  facing down and slide it into the micro SDHC card slot
   
5. Insert the battery, making sure the gold contacts line up. Press down gently to secure.
   
6. Replace the cover over the back of the phone, and then press down along the edges to secure. Make sure there are no gaps.

Charging the Phone

Your phone’s battery should have enough power for the phone to turn on, find a signal, and make a few calls. You should fully charge the battery as soon as possible.

WARNING!
Use only ZTE-approved chargers and USB cables. The use of unapproved accessories could damage your phone or cause the battery to explode.

1. Connect the adapter to the charging jack. Ensure that the adapter is inserted in the correct direction.
   
2. Connect the charger to a standard AC power outlet.
3. Disconnect the charger when the battery is fully charged.

NOTE:
If the battery is extremely low, you may be unable to power on the phone even when it is being charged. In this case, try again after charging the phone for at least 20 minutes. Contact the customer service if you still cannot power on the phone after prolonged charging.

Product Safety Information

	Don’t make or receive phone calls while driving. Never text while driving.
	Keep your phone at least 10 mm away from your body while making calls.
	Small parts may cause choking.
	Your phone can produce a loud sound.
	To prevent possible hearing damage, do not listen at high volume levels for long periods. Exercise caution when holding your phone near your ear while the loudspeaker is in use.
	Avoid contact with anything magnetic.
	Keep away from pacemakers and other electronic medical devices.
	Turn off when asked to in hospitals and medical facilities.
	Turn off when told to on aircraft and at airports.
	Turn off when near explosive materials or liquids.
	Don’t use at gas stations.
	Your phone may produce a bright or flashing light.
	Don’t dispose of your phone in fire.
	Avoid extreme temperatures.
	Avoid contact with liquids. Keep your phone dry.
	Do not attempt to disassemble your phone.
	Only use approved accessories.
	Don’t rely on your phone as a primary device for emergency communications.

LEGAL INFORMATION

Copyright © 2020 ZTE CORPORATION.
All rights reserved.

No part of this publication may be quoted, reproduced, translated or used in any form or by any means, electronic or mechanical, including photocopying and microfilm, without the prior written permission of ZTE Corporation.

Notice
ZTE Corporation reserves the right to make modifications on print errors or update specifications in this guide without prior notice.
We offer self-service for our smart terminal device users.

Please visit the ZTE official website (at www.ztedevices.com) for more information on self service and supported product models. Information on the website takes precedence

Visit https://www.ztedevices.com to download the user manual. Just click Support from the home page and then select the location, product type, and name to search for
related support information.

Disclaimer

ZTE Corporation expressly disclaims any liability for faults and damages caused by unauthorized modifications of the software.
Images and screenshots used in this guide may differ from the actual product. Content in this guide may differ from the actual product or software.

Trademarks

ZTE and the ZTE logos are trademarks of ZTE Corporation.
The Bluetooth® word mark and logos are registered trademarks owned by the Bluetooth SIG, Inc. and any use of such marks by ZTE Corporation is under license.

micro SDHC Logo is a trademark of SD-3C, LLC.

Other trademarks and trade names are those of their respective owners.

Version No.: R1.0
Edition Time : July 1, 2020
Manual No.: 079584510808

FCC RF Exposure Information (SAR)

This phone is designed and manufactured not to exceed  the emission limits for exposure to radio frequency (RF) energy set by the Federal Communications Commission of the United States and Industry Canada of Canada.

During SAR testing, this device was set to transmit at its highest certified power level in all tested frequency bands, and placed in positions that simulate RF exposure in usage against the head with no separation, and near the body with the separation of 10 mm. Although the SAR is determined at the highest certified power level, the actual SAR level of the device while operating can be well below the maximum value. This is because the phone is designed to operate at multiple power levels so as to use only the power required to reach the network. In general, the closer you are to a wireless base station antenna, the lower the power output.

The exposure standard for wireless devices employing a unit of measurement is known as the Specific Absorption Rate, or SAR. The SAR limit set by the FCC is 1.6 W/kg and 1.6 W/kg by Industry Canada.

This device is in compliance with SAR for general population/uncontrolled exposure limits in ANSI/IEEE C95.1-1992 and Canada RSS 102 and had been tested in accordance with the measurement methods and procedures specified in IEEE1528 and Canada RSS 102. This device has been tested and meets the FCC and IC RF exposure guidelines when tested with the device directly contacted to the body The FCC has granted an Equipment Authorization for this model phone with all reported SAR levels evaluated as in compliance with the FCC RF exposure guidelines. SAR information on this model phone is on file with the FCC and can be found under the Display Grant section of www.fcc.gov/oet/ea/fccid after searching on FCC ID: SRQZ2335L.

For this device, the highest reported SAR value for usage against the head is 0.36 W/kg and for usage near the body is 1.30 W/kg.

While there may be differences between the SAR levels of various phones and at various positions, they all meet the government requirements.

SAR compliance for body-worn operation is based on a separation distance of 10 mm between the unit and the human body. Carry this device at least 10 mm away from your body to ensure RF exposure level compliant or lower to the reported level. To support body-worn operation, choose the belt clips or holsters, which do not contain metallic components, to maintain a separation of 10 mm between this device and your body.

RF exposure compliance with any body-worn accessory, which contains metal, was not tested and certified, and using such body-worn accessory should be avoided.

IC Notice

This device complies with Industry Canada license exempt RSS standard(s). Operation is subject to the following two conditions:

1. This device may not cause interference, and
2. This device must accept any interference, including interference that may cause undesired operation of the device.

This Class B digital apparatus complies with Canadian ICES-003.
IC: 5200E-Z2335L

IC Radiation Exposure Statement 

This EUT is in compliance with SAR for general population/uncontrolled exposure limits in IC RSS102 and had been tested in accordance with the measurement methods and procedures specified in IEEE 1528 and IEC 62209. This equipment should be installed and operated with minimum distance of 1.0 cm between the radiator and your body.

This device and its antenna(s) must not be co-located or operating in conjunction with any other antenna or transmitter.

ZTE Z6252CA Blade A7P Smartphone User Guide

Product Safety Information

	Don’t make or receive phone calls while driving. Never text while driving.
	Keep your phone at least 15 mm away from your body while making calls.
	Small parts may cause choking.
	Your phone can produce a loud sound.
	To prevent possible hearing damage, do not listen at high volume levels for long periods. Exercise caution when holding your phone near your ear while the loudspeaker is in use.
	Avoid contact with anything magnetic.
	Keep away from pacemakers and other electronic medical devices.
	Turn off when asked to in hospitals and medical facilities.
	Turn off when told to on aircraft and at airports.
	Turn off when near explosive materials or liquids.
	Don’t use at gas stations.
	Your phone may produce a bright or flashing light.
	Don’t dispose of your phone in fire.
	Avoid extreme temperatures.
	Avoid contact with liquids. Keep your phone dry.
	Do not attempt to disassemble your phone.
	Only use approved accessories.
	Don’t rely on your phone as a primary device for emergency communications.

Getting to Know Your Phone

Setting Up Your Phone

The nano-SIM card can be installed or removed while the phone is turned on.

WARNING!

To avoid damage to the phone, do not use any other kind of SIM cards, or any non-standard nano-SIM card cut from a SIM card. You can get a standard nano-SIM card from your service provider.

1. Insert the tip of the tray eject tool into the hole on the card tray.
   
   CAUTION:
   Never replace the included tray eject tool with sharp objects. Ensure that the tray eject tool is perpendicular to the hole. Otherwise, the phone may be damaged.
2. Pull out the card tray. You can place a nano-SIM card on the right card slot and a micro SDXC card (optional) on the left card slot, as shown. Carefully slide the tray back into place.
   

Charging the Phone

Your phone’s battery should have enough power for the phone to turn on, find a signal, and make a few calls. You should fully charge the battery as soon as possible.

WARNING!

Use only ZTE-approved chargers and USB Type-C cables. The use of unapproved accessories could damage your phone or cause the battery to explode.

WARNING!

Do not remove the back cover. The battery is not removable. Removal may cause fire or explosion.

1. Connect the adapter to the charging jack.
   
2. Connect the charger to a standard AC power outlet.
3. Disconnect the charger when the battery is fully charged.

NOTE:

If the battery is extremely low, you may be unable to power on the phone even when it is being charged. In this case, try again after charging the phone for at least 20 minutes. Contact the customer service if you still cannot power on the phone after prolonged charging.

Powering On/Off Your Phone

Make sure the battery is charged before powering on.

• Press and hold the Power key to turn on your phone.
• To power off, press and hold the Power key to open the options menu, and touch > .

NOTE:
If the screen freezes or takes too long to respond, try pressing and holding the Power key for about 10 seconds to restart the phone.

Waking Up Your Phone

Your phone automatically goes into sleep mode when it is not in use for some time. The display is turned off to save power and the keys are locked to prevent accidental operations.

You can wake up your phone by turning on the display and unlocking the keys.

1. Press the Power keyto turn the screen on.
2. Swipe up on the screen.

NOTE:
If you have set a fingerprint, a face recognition, an unlock pattern, a PIN or a password for your phone, you’ll need to use your fingerprint or face, draw the pattern, or enter the PIN/password to unlock.

FCC RF Exposure Information (SAR)

This phone is designed and manufactured not to exceed the emission limits for exposure to radio frequency (RF) energy set by the Federal Communications Commission of the United States and Industry Canada of Canada. During SAR testing, this device was set to transmit at its highest certified power level in all tested frequency bands, and placed in positions that simulate RF exposure in usage against the head with no separation, and near the body with the separation of 15 mm. Although the SAR is determined at the highest certified power level, the actual SAR level of the device while operating can be well below the maximum value. This is because the phone is designed to operate at multiple power levels so as to use only the power required to reach the network. In general, the closer you are to a wireless base station antenna, the lower the power output.
The exposure standard for wireless devices employing a unit of measurement is known as the Specific Absorption Rate, or SAR. The SAR limit set by the FCC is 1.6 W/kg and 1.6 W/kg by Industry Canada.
This device is in compliance with SAR for general population/uncontrolled exposure limits in ANSI/IEEE C95.1-1992 and Canada RSS 102 and had been tested in accordance with the measurement methods and procedures specified in IEEE1528 and Canada RSS 102. This device has been tested and meets the FCC and IC RF exposure guidelines when tested with the device directly contacted to the body.

The FCC has granted an Equipment Authorization for this model phone with all reported SAR levels evaluated as in compliance with the FCC RF exposure guidelines. SAR information on this model phone is on file with the FCC and can be found under the Display Grant section of www.fcc.gov/oet/ea/fccid after searching on FCC ID: SRQ-Z6252CA.

For this device, the highest reported SAR value for usage against the head is 1.123W/kg and for usage near the body is 1.428 W/kg.

While there may be differences between the SAR levels of various phones and at various positions, they all meet the government requirements.

SAR compliance for body-worn operation is based on a separation distance of 15 mm between the unit and the human body. Carry this device at least 15 mm away from your body to ensure RF exposure level compliant or lower to the reported level. To support body-worn operation, choose the belt clips or holsters, which do not contain metallic components, to maintain a separation of 15 mm between this device and your body.

RF exposure compliance with any body-worn accessory, which contains metal, was not tested and certified, and using such body-worn accessory should be avoided.

Hearing aid compatibility (HAC) regulations for mobile phones

In 2003, the FCC adopted rules to make digital wireless telephones compatible with hearing aids and cochlear implants. Although analog wireless phones do not usually cause interference with hearing aids or cochlear implants, digital wireless phones sometimes do because of electromagnetic energy emitted by the phone’s antenna, backlight, or other components. Your phone is compliant with FCC HAC regulations (ANSI C63.19- 2011).

While some wireless phones are used near some hearing devices (hearing aids and cochlear implants), users may detect a buzzing, humming, or whining noise. Some hearing devices are more immune than others to this interference noise and phones also vary in the amount of interference they generate. The wireless telephone industry has developed a rating system for wireless phones to assist hearing device users in finding phones that may be compatible with their hearing devices. Not all  phones have been rated. Phones that are rated have the rating on their box or a label located on the box. These ratings are not guaranteed. Results will vary, depending on the level of immunity of your hearing device and the degree of your hearing loss. If your hearing device happens to be vulnerable to interference, you may not be able to use a rated phone successfully. Trying out the phone with your hearing device is the best way to evaluate it for your personal needs.

This phone has been tested and rated for use with hearing aids for some of the wireless technologies that it uses. However, there may be some newer wireless technologies used in this phone that have not been tested yet for use with hearing aids. It is important to try the different features of this phone thoroughly and in different locations, using your hearing aid or cochlear implant, to determine if you hear any interfering noise. Consult your service provider or the manufacturer of this phone for information on hearing aid compatibility. If you have questions about return or exchange policies, consult your service provider or phone retailer.

M-Ratings: Phones rated M3 or M4 meet FCC requirements and are likely to generate less interference to hearing devices than phones that are not labeled. M4 is the better/higher of the two ratings.

T-Ratings: Phones rated T3 or T4 meet FCC requirements and are likely to be more usable with a hearing device’s telecoil (“T Switch” or “Telephone Switch”) than unrated phones. T4 is the better/higher of the two ratings. (Note that not all hearing devices contain telecoils.)

Your SRQ-Z6252CA has been tested for hearing aid device compatibility and has an M4/T3 rating. Hearing devices may also be measured for immunity to this type of interference. Your hearing device manufacturer or hearing health professional may help you find results for your hearing device.

For additional information about the FCC’s actions with regard to hearing aid compatible wireless devices and other steps the FCC has taken to ensure that individuals with disabilities have access to telecommunications services, please go to www.fcc.gov/cgb/dro.

IC Notice

This device complies with Industry Canada license-exempt RSS standard(s). Operation is subject to the following two conditions: (1) this device may not cause interference, and (2) this device must accept any interference, including interference that may cause undesired operation of the device.

This Class B digital apparatus complies with Canadian
ICES-003.
IC: 5200E-Z6252CA

IC Radiation Exposure Statement

This EUT is in compliance with SAR for general  population/ uncontrolled exposure limits in IC RSS-102 and had been tested in accordance with the measurement methods and procedures specified in IEEE 1528 and IEC 62209. This equipment should be installed and operated with minimum distance of 1.5 cm between the radiator and your body.

This device and its antenna(s) must not be co-located or operating in conjunction with any other antenna or transmitter.

LEGAL INFORMATION

Copyright © 2021ZTE CORPORATION.
All rights reserved.

No part of this publication may be quoted, reproduced, translated or used in any form or by any means, electronic or mechanical, including photocopying and microfilm, without the prior written permission of ZTE Corporation.

Notice

ZTE Corporation reserves the right to make modifications on print errors or update specifications in this guide without prior notice.
We offer self-service for our smart terminal device users.
Please visit the ZTE official website (at www.ztedevices.com) for more information on user manual, self-service and supported product models. Information on the website takes precedence.

Disclaimer

ZTE Corporation expressly disclaims any liability for faults and damages caused by unauthorized modifications of the software.
Images and screenshots used in this guide may differ from the actual product. Content in this guide may differ from the actual product or software.

Trademarks

ZTE and the ZTE logos are trademarks of ZTE Corporation.
Android™ is a trademark of Google LLC.
The Bluetooth® word mark and logos are registered trademarks owned by the Bluetooth SIG, Inc. and any use of such marks by ZTE Corporation is under license.

microSDXC Logo is a trademark of SD-3C, LLC. Other trademarks and trade names are those of their respective owners.

Version No.: R1.0
Edition Time: September 1, 2021

Prepare

• Avalid nano-SIM card.
  
• View the label on your device to get the default information. The following figure is for reference only.
  
  -SIM card.
  

Power on Your Device

Connect the power adapter to your device and then your device willbe powered on and connect to the Internet automatically.

Access the Internet

• Wi-Fi: Get the default SSID and password on the label and connect to the Wi-Fi network with your mobile device, and then access the Internet.
  
• Network cable (RJ45): Connect with the computervia LAN portsand then access the Internet.
  

Change Your Device Settings

You can change the device settings by logging in to the 5G CPE configuration web page.

1. View the label on your device to get thedefault Device Manager Website IP address and Password.
   
2. Launch the Internet browser and enter theDevice Manager Website IP addressin the address bar.
3. Input the password and then click Login.
4. After the 5G CPE configuration web page is opened, you can change the Wi-Fi SSID, password or other settings.

Internet Wi-Fi Function

Your device supports the Internet Wi-Fi function and you can use this function to extend your existing Wi-Fi network.

1. Log in to the 5G CPE configuration page.
2. Select Wi-FiSettings > Internet Wi-Fi.
3. Set the Internet Wi-Fi Switch to Enable, and click Apply.
4. Connect to the Wi-Fi hotspot.
   The following two methods are for your reference.
   → Select a Wi-Fi hotspot listed in the Wi-Fi Hotspot area and click Connect.
   Enter a password in the Password text box and click Yes.
   → Click Add Network, enter the Wi-Fi hotspot information in the Add Wi-Fi Hotspot area, and click Apply. Click the Wi-Fi hotspot you have added and then click Connect.
5. After the device is connected to the Wi-Fi hotspot successfully, you can access the Internet.

Bridge Mode

Your device supports the bridge mode and you can use this service from your service provider to access the Internet.

1. Ensure that your device can connect to the Internet by using your nano-SIM card automatically.
2. Log in to the 5G CPE configuration web page.
3. Change the operation mode to Bridge Mode and select the WAN connectior network port . The device will be restarted automatically.
   NOTE:
   Please disconnect from the Internet first and then you can change the mode.
4. Connect the computer or other cable-connected client to the LAN port you selected and the client can obtain the IP address from the WAN DHCP host and connect to the Internet directly.

NOTE:
The cable-connected cllent connected to the other LAN port or the Wi-Fi connected clients cannot visit the internet, but they can communicate with each other. If you want to change the operation mode, you can us this client to log in to the configuration page to change the mode

Cable Broadband Mode

Your device supports the cable broadband mode and you can use this service from your service provider to access the Internet.

1. Connect either of the two LAN ports and the broadband service network port with a network cable.
2. Log in to the 5G CPE configuration web page.
3. Change the operation mode to Cable Broadband Mode.
   NOTE:
   Please disconnect from the Internet first and then you can change the mode.
4. Set the detailedparametersgiven by your service provider.
5. Use your clients to access the Internet.
   

Telephone

Your device supports the telephone function. Before using the telephone function, connect the telephone and insert the nano-SIM card.
To make a call:

1. Pick up the handset.
2. Dial the telephone number.
3. Wait for the call to be connected.

WPS

Your device supports the WPS function. You can use this function to connect a client to your device.

1. Press the WPS button on your device to activate the WPS function. The WIFI indicator is blinking.
2. Enable the WPS function on your client.
3. Follow the system prompts on your client to establish the connection.

Indicator Lights and Interfaces

Troubleshooting

Internet Related Problems

Voice Related Problems

Others

Getting More Help

You can get help by:

• Sending an email to mobile@zte.com.cn
• Visiting https://www.ztedevices.com

LEGAL INFORMATION

Copyright © 2021 ZTE CORPORATION.

All rights reserved.
No part of this publication may be quoted, reproduced, translated or used in any form or by any means, electronic or mechanical, including photocopying and microfilm, without the prior written permission of ZTE Corporation.

Notice
ZTE Corporation reserves the right to make modifications on print errors or update specifications in this guide without prior notice.

Disclaimer
Images and screenshots used in this guide may differ from the actual product. Content in this guide may differ from the actual product or software.

Trademarks
ZTE and the ZTE logos are trademarks of ZTE Corporation.
Other trademarks and trade names are those of their respective owners.

Version No.: R1.0

Warning and Notice

Safety Precautions

• Some electronic devices may be susceptible to electromagnetic interference. Locate the device away from TV set, radio and other electronic equipment to avoid electromagnetic interference.
• The device may interfere with medical devices like hearing aids and pacemakers. Consult a physician or the manufacturer of the medical device before using it.
• Please keep yourself at least 20 centimeters away from your device.
• Do not use your device in dangerous environments such as oil terminals or chemical factories where there are explosive gases or explosive products being processed.
• Please use original accessories or accessories that are authorized by ZTE. Unauthorized accessories may affect the device performance, damage the device or cause danger to you.
• Do not attempt to dismantle the device. There are no user-serviceable parts.
• Do not allow the device or accessories to come into contact with liquid or moisture at any time. Do not immerse the device in any liquid.
• Do not place objects on top of the device. This may lead to overheating of the device.
• The device must be placed in awell-ventilated environment for use.
• Do not expose the device to direct sunlight or store it in hot areas. High temperature can shorten the life of electronic devices.
• Do not allow children to play with the device or power adapter.
• The device is for indoor use only. Do not use the device outside.
• For pluggable equipment, the socket-outlet shall be installed near the equipment and shall be easily accessible.

Cleaning and Maintaining

• Use an antistatic cloth to clean the device. Do not use chemical or abrasive cleanser as these could damage the plastic case. Turn off your device before you clean it.
• Use the device within the temperature range of -20℃~+55℃, and the storage temperature range is -40℃ ~+70℃. The humidity range is 5%~95%.
• Do not use your device during a thunderstorm. Remove the mains power pack from the wall socket.

Limited Warranty

This warranty does not apply to defects or errors in the product caused by:
i. Reasonable abrasion.
ii. End users’ failure to follow ZTE’s installation, operation or maintenance instructions or procedures.
iii. End users’ mishandling, misuse, negligence, or improper installation, disassembly, storage, servicing or operation of the product.
iv. Modifications or repairs not provided by ZTE or a ZTE-certified individual.
v. Power failures, surges, fire, flood, accidents, and actions of third parties or other events outside ZTE’s reasonable control.
vi. Usage of third-party products or usage in conjunction with third-party products if such defects are due to the combined usage.
vii. Any other cause beyond the range of normal usage intended for the product.
End users have no right to reject or return the product, or receive a refund for the product from ZTE under the above-mentioned situations.
This warranty is end users’ sole remedy and ZTE’s sole liability for defective or nonconforming items, and is in lieu of all other warranties, expressed, implied or statutory, including but not limited to the implied warranties of merchantability and fitness for a particular purpose, unless otherwise required under the mandatory provisions of the law.

Limitation of Liability

ZTE shall not be liable for any loss of profits or indirect, special, incidental or consequential damages resulting from or arising out of or in connection with using of this product, no matter whether or not ZTE had been advised, knew or should have known of the possibility of such damages, including, but not limited to lost profits, interruption of business, cost of capital, cost of substitute facilities or product, or any downtime cost.

FCC Regulations:
This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1)
This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.
This device has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiated radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
-Reorient or relocate the receiving antenna.
-Increase the separation between the equipment and receiver.
-Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
-Consult the dealer or an experienced radio/TV technician for help.

Caution: Changes or modifications not expressly approved by the party responsible for compliance could avoid the user‘s authority to operate the equipment.

Radio Frequency (RF) Exposure
Your device contains a transmitter and a receiver. When it is ON, it receives and transmits RF energy.
When you communicate with your device, the system handling your connection controls the power level at which your device transmits.
Important safety information regarding radiofrequency radiation (RF) exposure. To ensure compliance with
RF exposure guidelines the device must be used with a separation from the body. Failure to observe these instructions could result in your RF exposure exceeding the relevant guideline limits.
The transmitter is using external antenna that operate at 20cm or more from nearby persons.

The FCC grant can be found under the Display Grant section of http://www.fcc.gov/oet/fccid after searching on FCC ID: SRQ-MC801A.

IC Notice
This radio transmitter (identify the device by certification number, or model number if Category II) has been approved by Industry Canada to operate with the antenna types listed below with the maximum permissible gain and required antenna impedance for each antenna type indicated. Antenna types not included in this list, having a gain greater than the maximum gain indicated for that type, are strictly prohibited for use with this device.
Immediately following the above notice, the manufacturer shall provide a list of all antenna types approved for use with the transmitter, indicating the maximum permission antenna gain (in dBi) and required impedance for each.
This device complies with Industry Canada license-exempt RSS standard(s). Operation is subject to the following two conditions:
(1) this device may not cause interference, and
(2) this device must accept any interference, including interference that may cause undesired operation of the device.
This Class B digital apparatus complies with Canadian ICES-003.
IC: 5200E-MC801A

IC Radiation Exposure Statement
This device complies with IC radiation exposure limits set forth for an uncontrolled environment. In order to avoid the possibility of exceeding the IC radio frequency exposure limits, human proximity to the antenna shall not be less than 20cm (8 inches) during normal operation.

ZTE CORPORATION
NO. 55, Hi-tech Road South, Shenzhen, P.R.China
Postcode: 518057

ZTE Z2335CC Link II Flip Phone

LEGAL INFORMATION

Copyright © 2020 ZTE CORPORATION. All rights reserved.
No part of this publication may be quoted, reproduced, translated, or used in any form or by any means, electronic or mechanical, including photocopying and microfilm, without the prior written permission of ZTE Corporation.

Notice

ZTE Corporation reserves the right to make modifications to print errors or update specifications in this guide without prior notice. We offer self-service for our smart terminal device users. Please visit the ZTE official website (at www.ztedevices.com) for more information on self-service and supported product models. Information on the website takes precedence. Visit https://www.ztedevices.com to download the user manual. Just click Support from the home page and then select the location, product type, and name to search for related support information.

Disclaimer

ZTE Corporation expressly disclaims any liability for faults and damages caused by unauthorized modifications of the software. Images and screenshots used in this guide may differ from the actual product. Content in this guide may differ from the actual product or software.

Trademarks

ZTE and the ZTE logos are trademarks of ZTE Corporation. The Bluetooth® word mark and logos are registered trademarks owned by the Bluetooth SIG, Inc. and any use of such marks by ZTE Corporation is under license. microSDHC Logo is a trademark of SD-3C, LLC. Other trademarks and trade names are those of their respective owners.

• Version No: R1.0
• Edition Time: July 1, 2020
• Manual No: 07958451xxxx

Getting to Know Your Phone

Power off your phone before installing or removing the nano-SIM card, the microSDHC card (optional), or the battery.
WARNING!
To avoid damage to the phone, do not use any other kind of SIM card, or any non-standard nano-SIM card cut from a SIM card. You can get a standard nano-SIM card from your service provider.

• Place your finger in the slot at the lower left of the back cover to lift and remove the cover.

• If the battery is installed already, remove it.
• Hold your nano-SIM card with the metal contacts facing down and slide it into the nano-SIM card slot.

• Hold your microSDHC card with the metal contacts facing down and slide it into the microSDHC card slot

• Insert the battery, making sure the gold contacts line up. Press down gently to secure.

• Replace the cover over the back of the phone, and then press down along the edges to secure. Make sure there are no gaps.

Charging the Phone

Your phone’s battery should have enough power for the phone to turn on, find a signal, and make a few calls. You should fully charge the battery as soon as possible.
WARNING!
Use only ZTE-approved chargers and USB cables. The use of unapproved accessories could damage your phone or cause the battery to explode.

• Connect the adapter to the charging jack. Ensure that the adapter is inserted in the correct direction.

• Connect the charger to a standard AC power outlet.
• Disconnect the charger when the battery is fully charged.

NOTE:
If the battery is extremely low, you may be unable to power on the phone even when it is being charged. In this case, try again after charging the phone for at least 20 minutes. Contact the customer service if you still cannot power on the phone after prolonged charging.

Product Safety Information

FCC RF Exposure Information (SAR)

This phone is designed and manufactured not to exceed the emission limits for exposure to radio frequency (RF) energy set by the Federal Communications Commission of the United States. During SAR testing, this device was set to transmit at its highest certified power level in all tested frequency bands and placed in positions that simulate RF exposure in usage against the head with no separation, and near the body with the separation of 10 mm. Although the SAR is determined at the highest certified power level, the actual SAR level of the device while operating can be well below the maximum value. This is because the phone is designed to operate at multiple power levels so as to use only the power required to reach the network. In general, the closer you are to a wireless base station antenna, the lower the power output. The exposure standard for wireless devices employing a unit of measurement is known as the Specific Absorption Rate or SAR. The SAR limit set by the FCC is 1.6 W/kg. This device is in compliance with SAR for general population/uncontrolled exposure limits in ANSI/IEEE C95.1-1992 and had been tested in accordance with the measurement methods and procedures specified in IEEE1528. The FCC has granted an Equipment Authorization for this model phone with all reported SAR levels evaluated as in compliance with the FCC RF exposure guidelines. SAR information on this model phone is on file with the FCC and can be found under the Display Grant section of www.fcc.gov/oet/ea/fccid after searching on FCC ID: SRQ-Z2335CC. For this device, the highest reported SAR value for usage against the head is 0.58 W/kg and for usage near the body is 1.28 W/kg. While there may be differences between the SAR levels of various phones and at various positions, they all meet the government requirements. SAR compliance for body-worn operation is based on a separation distance of 10 mm between the unit and the human body. Carry this device at least 10 mm away from your body to ensure the RF exposure level is compliant or lower to the reported level. To support body-worn operation, choose the belt clips or holsters, which do not contain metallic components, to maintain a separation of 10 mm between this device and your body. RF exposure compliance with any body-worn accessory, which contains metal, was not tested and certified, and using such body-worn accessories should be avoided.

FCC Regulations

This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions:

1. This device may not cause harmful interference, and
2. this device must accept any interference received, including interference that may cause undesired operation.

This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.

CAUTION:
Changes or modifications not expressly approved by the manufacturer could void the user’s authority to operate the equipment. The antenna(s) used for this transmitter must not be co-located or operating in conjunction with any other antenna or transmitter.

MC7010
Quick Start Guide

Scan this QR code to download the Install Helper application.

http://insthelper.ztems.com/installhelper

LEGAL INFORMATION

Copyright © 2021 ZTE CORPORATION
All rights reserved.
No part of this publication may be excerpted, reproduced, translated or utilized in any form or by any means, electronic or mechanical, including photocopying and microfilm, without the prior written permission of ZTE Corporation.
This document is published by ZTE Corporation. We reserve the right to make modifications to print errors or updates.
Version No.: R1.0

Unpacking and Preparations

Before installing the device, make sure that all items listed in the packing list are present. If something is missing or damaged, please contact ZTE technical support.
Packing List

The MC7010 ODU CPE	The Quick Start Guide	1 Cover plate set(POE adapter): Anti-theft screw * 2, Screw anti-theft key * 1
Mounting Kit: Metal bracket, Backplane, Metal clamp, M6 expansion bolts & M6 expansion spigots*4, M3 crosshead screws*5	1 POE adapter and AC Power cord	1 long network cable(for connecting the device and POE adapter), 1 short network cable for connecting the POE adapter and PC/Router), RJ45 socket*2

Prepare the following accessories (not included):

• Crosshead screwdriver
• Flathead screwdriver
• Hammer drill
• Marker pens

Installation Precautions

• Do not install the device in the following directions:

Do not install the device with the interface side facing upwards.	Do not install the device horizontally.	Do not install the device tilted.

WARNING!
The device must be installed downwards and vertically. It is not recommended to install the device in other directions (including but not limited to the above scenarios). ZTE is not liable for any problem caused by the installation in other incorrect directions.

• Do not install the device at a high position (lightning area).
• The device must be placed in a well-ventilated environment for use. If possible, install the device in a place with less direct sunlight, for example, in the shade. The device must not be installed at the outlet of the exhaust pipe or installed in a place where water passes through, for example, a rain shed.
• The device shall be installed in the position of the site survey design drawings and within the protection range of 45° of the lightning rod. In high mountains and areas with heavy lightning (the number of thunderstorm days per year exceeds 180), ensure that the device is within the protection range of 30°of the lightning rod.
• When the device is mounted on the wall, it should better be more than 1 m away from the grounding cable of the lightning rod and more than 20 cm away from the lightning protection zone.
• When installing the device against a pole, do not install a lightning rod on the pole. It is recommended that an independent lightning rod be installed near the pole. If a lightning rod is installed on the pole, it is recommended that the lightning rod be led out and grounded directly.
• The mounting pole must be firm, cannot be shaken and must meet the wind-resistant requirements (not less than level-10 wind speed).
• The mounting pole should be vertical, and the vertical error should be less than ±2°.

Installation Modes

You can install the device in either of the following ways:

Install the device on a wall.	Install the device against a pole.

Requirements of Installation Space and Medium

• Installation space requirements
• Installation medium requirements

Recommended Installation Locations

Installing the nano-SIM Card

Insert the nano-SIM card to the SIM card slot as shown.
WARNING!
Your device does not support (U) SIM cards, micro-SIM cards, or any other nonstandard SIM cards.
To avoid damage to the device, do not use those cards or any cardholders.

Installing the Network Cable

1. Connect the RJ45 to the network port on the MC7010 while the two screws are also inserted into the holes at the bottom of the device.
2. Push the cover plate upwards until it is secured, and use a screw anti-theft removal wrench to install the cover plate on the device.NOTES:
   If the mains cable is more than 0.8m visible outside the house after installation, it must be attached to a wall or rod to avoid damage.

Using Install Helper Application to Detect Position

Before installing the MC7010, you can install the Install Helper application on your mobile phone and connect to the device to detect the signal strength and help you detect and locate the installation location.
NOTE:
View the label on this guide to get the link or QR code to download the Install Helper application.
Powering on the MC7010

1. Connect the CAT5E network cable which is from the MC7010 to the network port (RJ45-2) on the POE adapter.
2. Connect the power connector on the POE adapter to the socket.

Connecting to the MC7010
Before connecting to the device, make sure that you have installed the Install Helper application and turn on the Bluetooth of your phone.

1. Open the app list and touch Install Helper.
2. Touch CONNECT TO DEVICE and select MC7010. The Bluetooth of the device will turn on automatically, and your phone automatically scans for and displays the IDs of all available Bluetooth devices in range.
3. Touch the device you want to pair with.
4. Touch PAIR & CONNECT > PAIR to accept the connection.
5. Enter the password and touch OK to manage the device.

NOTE:
View the label on this guide to get the default password.
Detecting and Adjusting Installation Position

1. Move the device around the mounting wall/pole or try different positions and touch DETECT POSITION.
2. Follow the on-screen instructions to attach the device to your target position, and slowly move it until it provides feedback.
   NOTE:
   The device does not support elevation angle adjustment. It only supports horizontal 180° adjustment.
3. The signal strength at the current position is displayed (Perfect, Great, Good, Poor and Terrible). You can touch view details to view the network details. When the device signal is detected, your phone automatically beeps. The louder the sound and the stronger the vibration, the better the signal strength.
   NOTE: 
   Touch FINISH to end the detection and select whether to save the current position if needed.
4. Continue the detection until the desired position is detected, and save or continue to adjust the position as prompted.

Powering off the MC7010
After the installation position is determined, disconnect the POE adapter from the device.

Installing Your Device

Installing the Device on a Wall

1. Mark the positions for drilling holes on the wall.
2. Firstly, use a 6mm percussion drill to drill holes at the marked positions, and install four M6 expansion spigots. Secondly, use four M6 expansion bolts to fix the bracket to the wall. CAUTION:
   The screw hole of the bracket faces upwards. Do not install the bracket upside down. Otherwise, the screw cannot be installed later.
3. Use four M3 crosshead screws to install the backplane on the device.
4. Firstly, fasten the backplane to the installed bracket through the upper and lower slots, and align the hole on the backplane with the hole on the bracket. Secondly, use one M3 crosshead screw to install the MC7010 on the bracket.

Installing the Device against a Pole

1. Use a screwdriver to loosen the clamp and release the buckle.
2. Pass the clamp through the U-shape groove on the bracket to install the bracket against the pole.
   CAUTION:
   The screw hole of the bracket faces upwards. Do not install the bracket upside down. Otherwise, the screw cannot be installed later.
3. Adjust the clamp to the proper tightening position, press the buckle, and use a screwdriver to lock the clamp to fix the bracket.
4. Use four M3 crosshead screws to install the backplane on the device.
5. Firstly, fasten the backplane to the installed bracket through the upper and lower slots, and align the hole on the backplane with the hole on the bracket. Secondly, use one M3 crosshead screw to install the MC7010 on the bracket.

NOTE:
Before installing the device on the bracket, you can move the device horizontally and slowly on the pole to further adjust the position if needed.

Connecting the POE Adapter

1. Connect the CAT5E network cable which is from the MC7010 to the network port (RJ45-2) on the POE adapter.
2. Connect the PC network port (RJ45-1) on the POE adapter to your PC/IDU (router) with the RJ-45 network cable.

Installation Check

Device Installation:

• The MC7010 is installed firmly.
• The network cables are installed firmly.
• The cover plate on the device is installed.
• The nano-SIM card is installed.
• The network interface on the POE adapter is installed correctly.

Cables Installation:

• Verify that all cables are connected properly, cable connectors are secure.
• Cables should be laid in a clear and straight manner without crossing each other. There is no obvious curve or slant. Cables do not hang in the air or cross each other.

System Power-On

Powering on the device
Connect the power connector on the POE adapter to the socket. The POE adapter starts to supply power to the MC7010. When the indicator of the POE adapter and POWER LED of the device turns green, the MC7010 is correctly powered.

Preliminary Device Acceptance

1. Check indicator status.
2. Connect the device to a PC and log in to the configuration page to view the device status.

LED Behavior

When setting up the MC7010, the LED will have the following behavior.

NOTES:

• To avoid light pollution and save energy, indicators will be turned off after the device operates normally for about 15 minutes. If indicators need to be solid on, you can change its settings on the 5G CPE configuration page.
• When a problem occurs, indicators will be automatically lighted up again to help you check the device status. After the problem is resolved, indicators will be turned off immediately.

Logging in to the 5G CPE Page

1. Ensure that the connection between your device and the PC/ router is correct.
2. Launch the Internet browser and enter http://192.168.254.1 in the address bar.
3. Enter the password to log in to the 5G CPE configuration page

NOTE:
View the label on this guide to get the default password.

Accessing the Internet

After a PC/router is successfully connected to your device, you can access the Internet in Automatic or Manual mode. The default mode is Automatic.

Mode	Operation
Automatic	Your device is automatically connected to the Internet, and you can surf on the Internet through the router.
Manual	1. Log in to the 5G CPE configuration page. 2. Select network Settings > Connection Mode > Manual, and then click Apply. 3. Click <to return to the home page, and click or.

NOTES:

• To change the current connection setting, please disconnect from the Internet first.
• To modify the parameters of your device, log in to the 5G CPE configuration page.

Confirming the Connection Status and Making More Settings

Confirming the Connection Status
The connection status-related information is displayed when you log in to the configuration home page, and the Status Information below shows the information about System information, LAN details, Cellular connection status, WAN connection
status and advanced status details. You can touch Detail Information to get more details. To see details on the connected session, touch Data Usage at the bottom left of the page.
Making More Settings
At the bottom left of the home page, you can send SMS, add a Phonebook and touch Advanced Settings to make more settings of your device.

Troubleshooting

NOTE:
You can press and hold the RESET button at the bottom of the device for about 3 seconds to restore your device to the factory settings if needed.

Getting More Help

You can get help by:

• Sending an email to mobile@zte.com.cn
• Visiting www.ztedevices.com

Warning and Notice

Safety Precautions

• Please keep yourself at least 20 centimeters away from your device.
• Do not use your device in dangerous environments such as oil terminals or chemical factories where there are explosive gases or explosive products being processed.
• Please use original accessories or accessories that are authorized by ZTE. Unauthorized accessories may affect the device’s performance, damage the device or cause danger to you.
• Be careful of the edges of the metal mounting kit not to hurt your body parts such as fingers when installing the device.
• Do not attempt to dismantle the device. There are no user-serviceable parts.
• Do not allow the device or accessories to come into contact with liquid or moisture at any time. Do not immerse the device in any liquid.
• Do not allow children to play with the device or power adapter.
• The device is for outdoor use only. Do not use the device inside.

Cleaning and Maintaining

• Use an antistatic cloth to clean the device. Do not use chemical or abrasive cleaners as these could damage the plastic case. Turn off your device before you clean it.
• Use the device within the temperature range of -30°C ~ +55°C, and the storage temperature range is -40°C ~ +85°C. The humidity range is 5%~95%. Under a low-temperature(-40°C~ 0°C)environment, the device will preheat when connected to the power supply. After heating up, it will start functioning normally.

Limited Warranty

This warranty does not apply to defects or errors in the product caused by:
i. Reasonable abrasion.
ii. End users’ failure to follow ZTE’s installation, operation or maintenance instructions or procedures.
iii. End users’ mishandling, misuse, negligence, or improper installation, disassembly, storage, servicing or operation of the product.
iv. Modifications or repairs not provided by ZTE or a ZTE-certified individual.
v. Power failures, surges, fire, flood, accidents, and actions of third parties or other events outside ZTE’s reasonable control.
vi. Usage of third-party products or used in conjunction with third-party products if such defects are due to the combined usage.
vii. Any other cause beyond the range of normal usage intended for the product.
End-users have no right to reject or return the product or receive a refund for the Product from ZTE under the above-mentioned situations.
This warranty is end users’ sole remedy and ZTE’s sole liability for defective or nonconforming items, and is in lieu of all other warranties, expressed, implied or statutory, including but not limited to the implied warranties of merchantability and fitness for a particular purpose, unless otherwise required under the mandatory provisions of the law.
Limitation of Liability
ZTE shall not be liable for any loss of profits or indirect, special, incidental or consequential damages resulting from or arising out of or in connection with using of this product, no matter whether or not ZTE had been advised, knew or should have known of the possibility of such damages, including, but not limited to lost profits, interruption of business, cost of capital, cost of substitute facilities or product, or any downtime cost.
RF Exposure
This equipment complies with CE radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with a minimum distance of 20 cm between the radiator and your body.

Specification

This radio equipment operates with the following frequency bands and maximum radio-frequency power.
NOTE:
All ZTE products are compliant with these power limits required by the European Union. Frequency bands supported by the product vary by model.
WCDMA BAND 1/2/5/8: 23dBm
FDD LTE BAND 1/3/7: 22.5dBm
FDD LTE BAND 8/20/28: 23dBm
TDD LTE BAND 38: 22.5dBm
5G NR(PC3): n1/3/7/8/20/28/38/40/77: 22.5dBm
5G NR(PC3): 41/78/79: 24.5dBm
5G NR(PC2): n1/3/7/8/20/28/38/40/77: 26dBm
5G NR(PC2): 41/78/79: 26dBm
Bluetooth LE: 5dBm
CE Caution (Proper Use)
As described in this guide, your device can be used only in the right location. If possible, please do not touch the antenna area on your device.

Disposal of Your Old Appliance

1. When this crossed-out wheeled bin symbol is attached to a product, it means the product is covered by the European Directive 2012/19/EU.
2. All electrical and electronic products should be disposed of separately from the municipal waste stream via designated collection facilities appointed by the government or the local authorities.
3. The correct disposal of your old appliance will help prevent potential negative consequences for the environment and human health.

For this product’s recycling information based on WEEE directive, please send an e-mail to weee@zte.com.cn

EU DECLARATION OF CONFORMITY

Hereby, ZTE Corporation declares that the radio equipment type ZTE MC7010 is in compliance with Directive 2014/53/EU.
The full text of the EU declaration of conformity is available at the following Internet address: https://certification.ztedevices.com
Compliance of Directive 2009/125/EC
The product meets the requirement of Directive 2009/125/EC and is compliant with its COMMISSION REGULATION (EC) No 1275/2008 and (EU) No 801/2013. For more information, please visit https://certification.ztedevices.com

ZTE CORPORATION
NO. 55, Hi-tech Road South, Shenzhen, P.R.China
Postcode: 518057