Xiaomi MTJM01IQI Truck Builder User Manual

Read this manual carefully before use, and retain it for future reference.

Specifications

• Product Name: Mi Truck Builder Model: MTJM01IQI
• Ages: 6 and up Net Weight: 1.39 Ibs
• Materials: ABS and PC
• Package Dimensions: 12.6 × 9.6 × 2.3 in

Accessories

• Block Packs × 5
  
  
• Rubber Wheels × 6
  
  
• User Manual
  
• Building Instruction
  

Key Construction Points

1. Before you start
   Please verify the number of block packs included with your product. To prevent pieces from getting lost, open the packages and keep the pieces inside the cardboard box or your own container.
2. Build with blocks
   Please read the building instruction carefully and follow the steps in sequence.
3. Inspect your creation
   Verify if your Mi Truck Builder is assembled properly and make sure all pieces are firmly attached.

Precautions

• Do not expose the product to heat, fire, or ambient temperatures above 60 °C (140 ˚F).
• Do not subject the product to excessive force.
• This product contains small parts which may be hazardous to small children; adult supervision during product use is required for kids between 6 and 14 years old. Please keep the product away from children under 3 years of age to avoid the risk of choking or suffocation.
• Avoid direct sunlight. This product can be cleaned with water or a damp cloth. Please keep the pieces clean and dry.

Manufactured for: Xiaomi Communications Co., Ltd.
Manufactured by: Beijing AIQI Technology Co., Ltd. (a Mi Ecosystem company)
Address: Room 1203, Block D, No. 9/11 Shangdi 3rd St., Haidian District, Beijing For further information, please go to www.mi.com

WARNING:

SHOCKING HAZARD- Small parts Not for children under 3 Years.

xiaomi 22021211RG Poco F4 Smartphone

Overview

Thank you for choosing POCO F4

• Long press the power button to turn on the device.
• Follow the on-screen instructions to configure the device.
• For more information, visit our official website: www.mi.com/global/service/userguide

MIUI (for POCO)

POCO F4 comes pre-installed with MIUI (for POCO), our customized Android-based OS which provides frequent updates and user-friendly features based on suggestions from over 200 million active users worldwide. For more information, please visit en.miui.com

About Dual SIM

• Supports Dual SIM cards with no carrier restrictions, dual 5G ①
• Supports Dual Nano-SIM card slots, either card can be set as the primary card
• Supports Dual SIM 5G/4G/3G/2G
• Supports Dual SIM VoLTE ②

Note ①: 5G connection depends on the country, carrier, and user environment.
Note ②: VoLTE depends on the carrier’s network and related service deployment.

• Please do not insert non-standard SIM cards into the SIM card slot. They may damage the SIM card slot.
• WARNING: Do not disassemble this device.

WEE

• Special precautions must be taken to safely dispose of this product. This marking indicates that this product may not be discarded with other household waste in the EU.
• To prevent harm to the environment or human health from inappropriate waste disposal, and to promote sustainable reuse of material resources, please recycle responsibly.
• To safely recycle your device, please use return and collection systems or contact the retailer where the device was originally purchased.
• To view our Environmental Declaration, please refer to the following link: www.mi.com/en/about/environment

CAUTION

RISK OF EXPLOSION IF BATTERY IS REPLACED BY AN INCORRECT TYPE. DISPOSE OF USED BATTERIES ACCORDING TO INSTRUCTIONS.

To prevent possible hearing damage, do not listen at high volume levels for long periods.
Additional safety information and precautions can be accessed at the following link: www.mi.com/en/certification

Important Safety Information

Read all safety information below before using your device:

• Use of unauthorized cables, power adapters, or batteries can cause fire, explosion, or pose other risks.
• Use only authorized accessories which are compatible with your device.
• This device’s operating temperature range is 0°C to 40°C. Using this device in an environment outside of this temperature range may damage the device.
• If your device is provided with a built-in battery, to avoid damaging the battery or the device, do not attempt to replace the battery yourself.
• Charge this device only with the included or authorized cable and power adapter. Using other adapters may cause fire, electric shock, and damage the device and the adapter.
• After charging is complete, disconnect the adapter from both the device and the power outlet. Do not charge the device for more than 12 hours.
• The battery must be recycled or disposed of separately from household waste. Mishandling the battery may cause fire or explosion. Dispose of or recycle the device, its battery, and accessories according to your local regulations.
• Do not disassemble, hit, crush, or burn the battery. If the battery appears deformed or damaged, stop using it immediately.
  • Do not short-circuit the battery, as this may cause overheating, burns, or another injury.
  • Do not place the battery in a high-temperature environment.
  • Overheating may cause an explosion.
  • Do not disassemble, hit, or crush the battery, as this may cause the battery to leak, overheat, or explode.
  • Do not burn the battery, as this may cause fire or explosion.
  • If the battery appears deformed or damaged, stop using it immediately.
• The user shall not remove or alter the battery. Removal or repair of the battery shall only be done by an authorized repair center of the manufacturer.
• Keep your device dry.
• Do not try to repair the device yourself. If any part of the device does not work properly, contact Mi customer support or bring your device to an authorized repair center.
• Connect other devices according to their instruction manuals. Do not connect incompatible devices to this device.
• For AC/DC adapters, the socket outlet shall be installed near the equipment and shall be easily accessible.

Safety Precautions

• Observe all applicable laws and rules restricting the use of mobile phones in special situations and environments.
• Do not use your phone at petrol stations or in any explosive atmosphere or potentially explosive environment, including fueling areas, below decks on boats, fuel or chemical transfer or storage facilities, or areas where the air may contain chemicals or particles such as grain, dust, or metal powders. Obey all posted signs to turn off wireless devices such as your phone or other radio equipment. Turn off your mobile phone or wireless device when in a blasting area or in areas requiring “two-way radios” or “electronic devices” to be turned off to prevent potential hazards.
• Do not use your phone in hospital operating rooms, emergency rooms, or intensive care units. Always comply with all rules and regulations
  of hospitals and health centers. If you have a medical device, please consult your doctor and the device manufacturer to determine whether your phone may interfere with the device’s operation. To avoid potential interference with a pacemaker, always maintain a minimum distance of 15 cm between your mobile phone and the pacemaker.
• This can be done by using your phone on the ear opposite to your pacemaker and not carrying your phone in a breast pocket. To avoid interference with medical equipment, do not use your phone near hearing aids, cochlear implants, or other similar devices.
• Observe all aircraft safety regulations and turn off your phone on board aircraft when required.
• When driving a vehicle, use your phone in accordance with relevant traffic laws and regulations.
• To avoid being struck by lightning, do not use your phone outdoors during thunderstorms.
• Do not use your phone to make calls while it is charging.
• Do not use your phone in places with high humidity, such as bathrooms. Doing so may result in electric shock, injury, fire, and charger damage.

Security Statement

Please update your phone’s operating system using the built-in software update feature, or visit any of our authorized service outlets. Updating software through other means may damage the device or result in data loss, security issues, and other risks.

Legal Information

• This device may be operated in all member states of the EU.
• Observe national and local regulations where the device is used.
• This device is restricted to indoor use only when operating in the 5150 to 5350 MHz frequency range in :
  

  AT	BE	BG	HR	CY	CZ	DK
  EE	FI	FR	DE	EL	HU	IE
  IT	LV	LT	LU	MT	NL	PL
  PT	RO	SK	SI	ES	SE	UK(NI)
  IS	LI	NO	CH	TR

Restrictions in the 2.4 GHz band

Norway: This subsection does not apply for the geographical area within a radius of 20 km from the centre of Ny-Ålesund.
Ensure the power adapter used meets the requirements of Clause 6.4.5 in IEC/EN 62368-1 and has been tested and approved according to national or local standards.

Disclaimer

This user guide is published by Xiaomi or its local affiliated company. Improvements and changes to this user guide necessitated by typographical errors, inaccuracies of current information, or improvements to programs and/or equipment, may be made by Xiaomi at any time and without notice. Such changes will, however, be incorporated into new online editions of the user guide (please see details at www.mi.com/global/service/userguide). All illustrations are for illustration purposes only and may not accurately depict the actual device.

Read this manual carefully before use, and retain it for future reference.

Product Introduction

Wearing

Wear the wristband about one finger away from the wrist bone and adjust the tightness of the wristband to a comfortable position.
Tip: If you wear the strap too loose, the data acquisition of heart rate sensor may be affected.

Connection and binding

1. Scan the QR code on the watch display (Settings-APP Download) by your mobile phone, and then install the APP Runto Sport. You can also scan the QR code below to  download and install GloryFit from the mobile APP store.

https://app.help-document.com/gloryfit/download/index.html

2. After installing the APP, open and log in GloryFit, then select (device KW66 to be added) on the device page so as to connect it.

Tips:

• In the process of pairing, check if the Bluetooth functionon your mobile phone is enabled, so that the watch can be connected to your mobile phone.
• If the device cannot be found in the pairing process, or the device cannot be connected during use, please click “Settings – Reset” on the watch, then try to start the pairing again.
• If the watch still can not be found, please exit and re-open the APP.
• The connection status of the watch is as shown in the figures below :

Note: The battery power will be shown as 5 different levels on the watch (0%-25%-50%-75%-100%)

Operation

1. Open the control panel: Swipe the screen on the main interface downwards from the top
2. Open the messages/notifications: Swipe the screen on the main interface upwards from the bottom
3. Open the main menu:Swipe the screen on the main interface from left to right (Note: On other interfaces, slide your finger from left to right to return to the previous interface)
4. Open the status interface: Swipe the screen on the main interface from right to left
5. Quick dial change: Press and hold the dial interface for 3 seconds, and the watch vibrates once; then you can slide your finger to left or right to select the dial.
6. Power on: Press and hold the Power button for 5 seconds to switch it on (Power off: You need to press and hold the button for 3 seconds when the display is on to select whether to power off)
7. Quick sports pause/continue: Press the power button.
8. Press the power button to return to the homepage (Note: If you are on the level 2 interface, you will return to the level 1 interface).

Features

	13 sport modes (Running, Walking, Cycling, Alpinism, Yoga, Skipping,  Tennis, Baseball, Basketball, Badminton, Football, Rugby, Table Tennis)
	In running, walking, Alpinism and other sports modes, you can click  the screen to view the sports data (steps, pace, calories, distance and duration).
	Heart Rate Monitor: The watch will continuously track your heart rate  for 24 hours(Need to turn on the “Heart rate monitoring” in the APP at first), you can also view the historical heart rate data in the APP. Note: When this feature is enabled, the power consumption will be increased, and the battery endurance will be reduced.
	Status Interface: The steps, distance and calories will be recorded in  detail and displayed on watch everyday.
	Sleep: The watch will monitor your sleep status from 6:00 pm to the  11:59 am of the next day. Note: The sleep data on watch will be cleared  at 6:00pm everyday. But you still can check the historical sleep  data in the GloryFit APP.
	Music: The watch can be used to control the music player of the mobile phone, you can use it to play/pause or skip songs (it is only  compatible with the in-built music player of the mobile phone, may  not be compatible with third party’s player, and the volume cannot be  adjusted on the watch)
	Stopwatch: The watch can be used to count time (slide your finger to  the right after pressing the pause button to exit and return to the previous menu)
	Message: The watch will receive and display texts/ messages/ social  media notifications from your phone.
	Setting: You can shut down or reset the watch from setting, and you  can also check the info about the watch and App download QR code.

Charging

1. Place the watch on the magnetic charger, please make sure the charging contacts on the back of the watch are fully adsorbed the metal contacts of the charger. It can be  fully charged within about 3.5 hours.
2. Plug the charging cable into a standard USB charger purchased via official channels. The output voltage is 5V and the output current is 1A.
   If the watch cannot be turned on after being out of use for a long time, please wipe the charging contacts of the charging cable when using it again to remove the sweat or  moisture residue.
   Note: (If you do not use the watch often, please charge it once every month.)

Basic parameters

FAQ

1. The watch can not be connected to the APP.(Or the watch cant be found by the APP)
   • Please make sure the software version of your smart phone is over Android 4.4 Or iOS 7.0.
   • Please check whether the watch was connected to another phone or not, if yes please unbind it at first.
   • Please make sure you have enabled the Bluetooth function of your phone. (If it’s still not working, we recommend you to exit all of other APP and reopen the Bluetooth  function)
   • If the watch still cant be connected even after trying the above steps, please exit the GloryFit APP and restart the mobile phone and the watch.
   *Note: Some smart phones will not be connected to the watch in low battery mode.
2. Can’t get any text/message on the watch
   • First, please make sure the Bluetooth function is enabled on your mobile phone, and check whether the watch is connected successfully with your phone through the  GloryFit APP. Then turn on the “Notifications reminders” in the APP.
   • Then please check whether you give this APP the permission to keep running in the background on your mobile phone. If not, please allow it to keep running in the background.
   • And also check if the message can show up on your phone’s notification bar or not. If not, please allow the APP notifications to pop-up in the notification bar in the system setting: Setting- Notifications- Notification style-Tick the “Banners”.
   • If the messages can still not be displayed on the watch even after trying the above steps, please exit the GloryFit APP and restart the mobile phone and the watch.
3. How to synchronize the watch data to my phone?
   • Auto synchronization: When the watch is connected to the APP, it will automatically synchronize data;
   • Manual synchronization: After the watch is connected to the APP successfully, you can manually synchronize the data by swiping down the screen from the APP  homepage or data interface;
   • If the data cannot be synchronized, please try to disable and enable the Bluetooth function again on your mobile phone, or restart your mobile phone;
   (Note: In case of any common problems in operation, please refer to the Common problem in My profile of the APP, which can help you solve some problems) As shown in the figure below:

NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user  is encouraged to try to correct the interference by one or more of the following measures:
– Reorient or relocate the receiving antenna.
– Increase the separation between the equipment and receiver.
-Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
-Consult the dealer or an experienced radio/TV technician for help
Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.

This device complies with Part 15 of the FCC Rules.
Operation is subject to the following two conditions:
(1) this device may not cause harmful interference, and
(2) this device must accept any interference received, including interference that may cause undesired operation.

FCC ID: 2APA9-IMILAB-KW66
Model: KW66
MADE IN CHINA

Xiaomi R4CM Mi Router 4C 300mbps WiFi Router

Connect the cables

Power on the router, then connect the Internet (WAN) port to the DSL/Cable/satellite modem
* If your Internet network is connected via an Ethernet cable at the wall, connect the Ethernet cable directly to the Internet (WAN) port on the router

Set up the network connection

1. Connect to the Wi-Fi using a phone or computer (no password). The Wi-Fi name can be found on the panel at the base of the router
   * Wait until the system indicator light turns blue. Search for the Wi-Fi network and connect
2. At this point, you will automatically be directed to the landing page for connecting to the Internet (if you aren’t, open up the browser that comes with your system and enter “router.miwifi.com” or “192.168.31.1“)
   * Mi Router EULA is available at – http://www1.miwifi.com/router/eula/20191230.html
3. Please enter the account name and password provided by your broadband provider, then click Next (there are different ways of connecting to the internet, so this step may be skipped)
   * If you have forgotten your broadband account name or password, you can get them by contacting your broadband provider
4. Set a new Wi-Fi and administrator password. You can choose to use your Wi-Fi password as your administrator password as well
   * Please wait until the indicator light turns blue and stops flashing, then reconnect to the Wi-Fi

Manage Mi WiFi

The web management website is router.miwifi.com and supports basic Internet functions Scan the QR code, download the Mi WiFi app, and manage your router anytime, anywhere

FAQ

I have finished setting up my network. Why can’t I connect to the Internet?
Step 1: Use your phone to search for the Wi-Fi network set by your router. If you can’t find it, make sure that the router is connected to the power and has finished booting up
Step 2: Connect your phone to your router’s Wi-Fi network, go to router.miwifi.com”, and try to fix the problem based on the network diagnostics results

I’ve forgotten the administrator password for my router. What should I do?
If you haven’t set a specific password, your administrator password will be the same as your Wi-Fi password, so try using this to log in. If the problem persists, it is recommended that you restore your router to the factory settings, then set up the network again

How do I restore my router to the factory settings?
First make sure that the router has finished booting up, then hold down the Reset button at the base of the router for more than 5 seconds and let go when the system status light turns orange. When the router finishes booting up again, the reset was successful

What do the different indicator lights mean on the router?
There should be two indicator lights on the front panel, which are the network status light (blue light) and the system status light (three colors: blue, orange, and purple)

Network status light/Light with one color (blue)

• Off
  Nothing is plugged into the external Internet port or there is a problem with the connection
• On
  Network connection normal
• Flashing
  Sending or receiving data

System status light/three colors (blue, orange, and purple)

• Off
  Switched off or not connected to the power
• Orange
  System updating (flashing), system booting up (on, not flashing)
• blue
  Functioning normally (on, not flashing)
• purple
  Safe mode (flashing), system failure (on, not flashing)

Specifications

• Name: Mi Router 4C
• Model: R4CM
• Operating Temperature: 0~40℃
• Input: 5V,1A
• Operating Frequency: 2400MHz~2483.5MHz (≤20dBm)

Certifications:
Hereby, Xiaomi Communications Co., Ltd declares that the radio equipment type R4CM is in compliance with Directive 2014/53/EU. The full text of the EU declaration of conformity is available at the following internet address:
http://www.mi.com/global/service/support/declaration.html
All products bearing this symbol are waste electrical and electronic equipment (WEEE as in directive 2012/19/EU) which should not be mixed with unsorted household waste. Instead, you should protect human health and the environment by handing over your waste equipment to a designated collection point for the recycling of waste electrical and electronic equipment, appointed by the government or local authorities. Correct disposal and recycling will help prevent potential negative consequences to the environment and human health. Please contact the installer or local authorities for more information about the location as well as terms and conditions of such collection points.
Caution:

• The product can be used within all European Union countries.
• To comply with CE RF exposure requirements, the device must be installed and operated 20cm (8 inches) or more between the product and all person’s body.
• The adapter shall be installed near the equipment and shall be easily accessible.

FCC Statement

This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. Changes or modifications to this unit not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.
NOTE:
This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.

Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.

FCC radiation exposure
This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with a minimum distance of 20 cm between the radiator and your body. This transmitter must not be co-located or operating in conjunction with any other antenna or transmitter.

Xiaomi Redmi 9C NFC Smart Phone

Thank you for choosing Redmi 9C NFC
Long press the power button to turn on the device.
Follow the on-screen instructions to configure the device.
For more information, visit our official website:
www.mi.com/global/service/userguide

MIUI
Redmi 9C NFC comes pre-installed with MIUI, our customized Android-based OS which provides frequent updates and user-friendly features based on suggestions from over 200 million active users worldwide. For more information, please visit en.miui.com

About Dual SIM:

• Dual 4G SIM is offered by select telecom operators and may not be available in all regions.
• Supports dual nano-SIM cards. When using both SIM card slots, either card can be set as the primary card.
• VoLTE is only supported by telecom operators in certain regions.
• System may be automatically updated for optimal network performance. For details, please refer to the system version in use on the device.
• Please do not insert non-standard SIM cards into the SIM card slot. They may damage the SIM card slot.
• WARNING: Do not disassemble this device.

WEEE

Special precautions must be taken to safely dispose of this product. This marking indicates that this product may not be discarded with other household waste in the EU.
To prevent harm to the environment or human health from inappropriate waste disposal, and to promote sustainable reuse of material resources, please recycle responsibly.
To safely recycle your device, please use return and collection systems or contact the retailer where the device was originally purchased.
To view our Environmental Declaration, please refer to the following link: www.mi.com/en/about/environment

CAUTION
RISK OF EXPLOSION IF BATTERY IS REPLACED BY AN INCORRECT TYPE. DISPOSE OF USED BATTERIES ACCORDING TO INSTRUCTIONS.
To prevent possible hearing damage, do not listen at high volume levels for long periods.
Additional safety information and precautions can be accessed at the following link: www.mi.com/en/certification

Important Safety Information

Read all safety information below before using your device:

• Use of unauthorized cables, power adapters, or batteries can cause fire, explosion, or pose other risks.
• Use only authorized accessories which are compatible with your device.
•  This device’s operating temperature range is 0°C to 40°C. Using this device in an environment outside of this temperature range may damage the device.
•  If your device is provided with a built-in battery, to avoid damaging the battery or the device, do not attempt to replace the battery yourself.
• Charge this device only with the included or authorized cable and power adapter. Using other adapters may cause fire, electric shock, and damage the device and the adapter.
• After charging is complete, disconnect the adapter from both the device and the power outlet. Do not charge the device for more than 12 hours.
• The battery must be recycled or disposed of separately from household waste. Mishandling the battery may cause fire or explosion. Dispose of or recycle the device, its battery, and accessories according to your local regulations.
• Do not disassemble, hit, crush, or burn the battery. If the battery appears deformed or damaged, stop using it immediately.
• Do not short circuit the battery, as this may cause overheating, burns, or other injury.
• Do not place the battery in a high-temperature environment.
• Overheating may cause explosion.
• Do not disassemble, hit, or crush the battery, as this may cause the battery to leak, overheat, or explode.
• Do not burn the battery, as this may cause fire or explosion.
• If the battery appears deformed or damaged, stop using it immediately.
•  User shall not remove or alter the battery. Removal or repair of the battery shall only be done by an authorized repair center of the manufacturer.
•  Keep your device dry.
• Do not try to repair the device yourself. If any part of the device does not work properly, contact Mi customer support or bring your device to an authorized repair center.
• Connect other devices according to their instruction manuals. Do not connect incompatible devices to this device.
• For AC/DC adapters, the socket-outlet shall be installed near the equipment and shall be easily accessible.

Safety Precautions

• Observe all applicable laws and rules restricting use of mobile phones in specific situations and environments.
• Do not use your phone at petrol stations or in any explosive atmosphere or potentially explosive environment, including fueling areas, below decks on boats, fuel or chemical transfer or storage facilities, or areas where the air may contain chemicals or particles such as grain, dust, or metal powders. Obey all posted signs to turn off wireless devices such as your phone or other radio equipment. Turn off your mobile phone or wireless device when in a blasting area or in areas requiring “two-way radios” or “electronic devices” to be turned off to prevent potential hazards.
•  Do not use your phone in hospital operating rooms, emergency rooms, or intensive care units. Always comply with all rules and regulations of hospitals and health centers. If you have a medical device, please consult your doctor and the device manufacturer to determine whether your phone may interfere with the device’s operation. To avoid potential interference with a pacemaker, always maintain a minimum distance of 15 cm between your mobile phone and the pacemaker. This can be done by using your phone on the ear opposite to your pacemaker and not carrying your phone in a breast pocket. To avoid interference with medical equipment, do not use your phone near hearing aids, cochlear implants, or other similar devices.
• Observe all aircraft safety regulations and turn off your phone on board aircraft when required.
• When driving a vehicle, use your phone in accordance with relevant traffic laws and regulations.
• To avoid being struck by lightning, do not use your phone outdoors during thunderstorms.
• Do not use your phone to make calls while it is charging.
• Do not use your phone in places with high humidity, such as bathrooms. Doing so may result in electric shock, injury, fire, and charger damage.

Security Statement

Please update your phone’s operating system using the built-in software update feature, or visit any of our authorized service outlets. Updating software through other means may damage the device or result in data loss, security issues, and other risks.

Legal Information

This device may be operated in all member states of the EU.
Observe national and local regulations where the device is used.
Usability of this device may be restricted depending on the network provider.

Restrictions in the 2.4 GHz band:

Norway: This subsection does not apply for the geographical area within a radius of 20 km from the centre of Ny-Ålesund.
Ensure the power adapter used meets the requirements of Clause 6.4.5 in IEC/EN 62368-1 and has been tested and approved according to national or local standards.

Disclaimer
This user guide is published by Xiaomi or its local affiliated company. Improvements and changes to this user guide necessitated by typographical errors, inaccuracies of current information, or improvements to programs and/or equipment, may be made by Xiaomi at any time and without notice. Such changes will, however, be incorporated into new online editions of the user guide (please see details at www.mi.com/global/service/userguide). All illustrations are for illustration purposes only and may not accurately depict the actual device.

Xiaomi MDZ-22-AB Mi Box HDR Android TV Box

SPECIFICATIONS

• Brand Xiaomi
• Connectivity Technology Wi-Fi
• Supported Internet Services Netflix, Prime Video, Hulu, Vudu, YouTube
• Controller Type Remote Control, Voice Control
• Item Weight 3.6 Ounces
• Ram Memory Installed Size 8 GB
• Compatible Devices Television
• Memory Storage Capacity 8 GB
• Product Dimensions 0.39 x 3.82 x 3.82 inches
• Item Weight 3.6 ounces
• Item model number MDZ-22-AB

WHAT’S IN THE BOX

• Mi Box HDR Android TV Box
• Remote Control
• Installation guide

DESCRIPTION

The Xiaomi MDZ-22-AB Mi Box HDR Android TV Box is a popular streaming device produced by Xiaomi, a leading Chinese electronics company. The Mi Box is designed to provide users with an enhanced entertainment experience by enabling them to stream a wide variety of content directly to their TV. Running on the Android TV operating system, the Mi Box offers access to a vast selection of apps and services through the Google Play Store for TV. This allows users to enjoy their favorite streaming platforms, such as Netflix, YouTube, Hulu, and more, directly on their TV screens. One of the Xiaomi MDZ-22-AB Mi Boxes is its supports for 4K Ultra HD resolution, ensuring that users can enjoy a high-quality viewing experience with crisp and detailed visuals. Additionally, the Mi Box also supports High Dynamic Range (HDR) content, which enhances the contrast and color reproduction for a more vibrant and lifelike picture.

Connectivity is another key aspect of the Mi Box. It features built-in Wi-Fi and Bluetooth capabilities, allowing users to connect wirelessly to their home networks and pair with other compatible devices. The device is typically equipped with USB and HDMI ports, enabling easy connection to external storage devices and other peripherals. The Mi Box also integrates Google Assistant, enabling users to control their TV and smart home devices using voice commands. By utilizing the built-in Google Cast functionality, users can cast content from their smartphones, tablets, or computers directly to the Mi Box and enjoy it on the larger screen.

Overall, the Xiaomi MDZ-22-AB Mi Box HDR Android TV Box offers a convenient and feature-rich solution for streaming and enjoying a wide range of content on the TV. Its 4K Ultra HD support, HDR compatibility, and integration with the Android TV ecosystem make it a popular choice among users seeking an affordable and versatile streaming device.

PRODUCT USAGE

The Xiaomi MDZ-22-AB Mi Box HDR Android TV Box is a versatile device that allows you to transform your regular television into a smart TV. Here are some common ways to use the product:

• Media Streaming:
  The Mi Box enables you to stream your favorite movies, TV shows, and videos from popular streaming services such as Netflix, Hulu, YouTube, and more. You can access a wide range of content directly on your TV.
• Android TV Apps:
  The Mi Box runs on the Android TV operating system, providing access to a vast library of apps and games available on the Google Play Store. You can install apps for entertainment, news, sports, music, productivity, and much more.
• Casting and Mirroring:
  The Mi Box supports casting and mirroring functionality, allowing you to mirror your smartphone, tablet, or computer screen onto your TV. You can easily display photos, videos, or presentations from your mobile devices on a larger screen.
• Voice Control:
  The Mi Box comes with a voice remote control that supports voice commands. You can use voice search to find movies, TV shows, apps, and other content without typing.
• Gaming:
  The Mi Box supports gaming applications and Bluetooth gamepads. You can download and play a variety of Android games on your TV, enjoying an immersive gaming experience.
• Music Streaming:
  With the Mi Box, you can stream music from popular services like Spotify, Pandora, and Google Play Music directly on your TV. Enjoy your favorite tunes in high quality through your home entertainment system.
• Web Browsing:
  The Mi Box allows you to browse the internet on your TV using popular web browsers available on the Android TV platform. You can search the web, read articles, and access websites conveniently from your living room.
• Personal Media Playback:
  The Mi Box supports various media file formats, so you can play your own videos, photos, and music from external storage devices like USB drives or network storage devices.
• Live TV and DVR:
  The Mi Box can be used in combination with compatible live TV streaming services or digital TV tuners to watch live TV channels and even record shows with DVR functionality.
• Home Automation Control:
  The Mi Box can serve as a central hub for controlling your smart home devices. You can use compatible apps to control lights, thermostats, security cameras, and more, all from the convenience of your TV.
• Parental Controls:
  The Mi Box offers parental control features, allowing you to set restrictions on content access and create separate profiles for family members with customized settings.
• Multi-room Audio:
  If you have multiple Mi Box devices, you can use them in different rooms to create a multi-room audio system. Stream synchronized music throughout your home for a seamless audio experience.
• Software Updates:
  The Mi Box regularly receives software updates from Xiaomi, ensuring that you have access to the latest features, improvements, and security patches.
• Screen Saver and Ambient Mode:
  The Mi Box can display screensavers or ambient mode visuals on your TV when not in use, enhancing the aesthetic appeal of your living space.

These are just some examples of how you can use the Xiaomi MDZ-22-AB Mi Box HDR Android TV Box. The device offers a wide range of features and functionalities to enhance your TV viewing and entertainment experience.

FEATURES

• Operating System:
  The Mi Box runs on the Android TV operating system, providing access to a wide range of apps and services available on the Google Play Store for TV.
• High Dynamic Range (HDR):
  The Mi Box supports HDR content, allowing for enhanced contrast and more vibrant colors when connected to an HDR-compatible TV.
• 4K Ultra HD Support:
  It is capable of streaming and playing 4K Ultra HD content, providing a crisp and detailed viewing experience on compatible TVs.
• Google Cast:
  The Mi Box has built-in Google Cast functionality, allowing you to cast content from your smartphone, tablet, or computer directly to the TV.
• Google Assistant:
  With the Mi Box, you can use the built-in Google Assistant to control your TV and smart home devices using voice commands.
• USB and HDMI Ports:
  It features a USB port and an HDMI output, allowing you to connect external storage devices, and peripherals, and easily connect to your TV.
• Dolby Audio and DTS Surround Sound:
  The Mi Box supports various audio formats, including Dolby Audio and DTS surround sound, providing an immersive audio experience when connected to compatible audio systems.
• Storage and Memory:
  The device typically comes with 8GB or 16GB of internal storage for apps and media content. It may also feature 2GB or 3GB of RAM for smooth multitasking.
• Remote Control:
  The Mi Box usually includes a dedicated remote control for easy navigation and control of the Android TV interface.
• Connectivity:
  The Mi Box supports Wi-Fi and Bluetooth connectivity, enabling wireless streaming and connecting to other devices such as game controllers or audio systems.

FREQUENTLY ASKED QUESTIONS

Xiaomi Redmi Note 10 5G Smartphone User Guide

OverView

Thank you for choosing Redmi Note 10 5G Long press the power button to turn on the device. Follow the on-screen instructions to configure the device. For more information, visit our official website: www.mi.com/global/service/userguide

MIUI
Redmi Note 10 5G comes pre-installed with MIUI, our customized Android-based OS which provides frequent updates and user-friendly features based on suggestions from over 200 million active users worldwide. For more information, please visit en.miui.com

About Dual SIM

• Supports Dual SIM cards with no carrier restrictions, dual 5G ①
• Supports Dual Nano-SIM card slots, either card can be set as the primary card
• Supports Dual SIM 5G/4G/3G/2G
• Supports Dual SIM VoLTE ②
  Note: 5G connection depends on country, carrier, and user environment.
  Note: VoLTE depends on carrier’s network and related service deployment.
• Please do not insert non-standard SIM cards into the SIM card slot. They may damage the SIM card slot.
• WARNING: Do not disassemble this device.

WEEE
Special precautions must be taken to safely dispose of this product. This marking indicates that this product may not be discarded with other household waste in the EU.
To prevent harm to the environment or human health from inappropriate waste disposal, and to promote sustainable reuse of material resources, please recycle responsibly.
To safely recycle your device, please use return and collection systems or contact the retailer where the device was originally purchased.
To view our Environmental Declaration, please refer to the following link:
www.mi.com/en/about/environment

CAUTION
RISK OF EXPLOSION IF BATTERY IS REPLACED BY AN INCORRECT TYPE. DISPOSE OF USED BATTERIES ACCORDING TO INSTRUCTIONS.
To prevent possible hearing damage, do not listen at high volume levels for long periods. Additional safety information and precautions can be accessed at the following link: www.mi.com/en/certification

Important Safety Information

Read all safety information below before using your device:

• Use of unauthorized cables, power adapters, or batteries can cause fire, explosion, or pose other risks.
• Use only authorized accessories which are compatible with your device.
• This device’s operating temperature range is 0°C to 40°C. Using this device in an environment outside of this temperature range may damage the device.
• If your device is provided with a built-in battery, to avoid damaging the battery or the device, do not attempt to replace the battery yourself.
• Charge this device only with the included or authorized cable and power adapter. Using other adapters may cause fire, electric shock, and damage the device and the adapter.
• After charging is complete, disconnect the adapter from both the device and the power outlet. Do not charge the device for more than 12 hours.
• The battery must be recycled or disposed of separately from household waste. Mishandling the battery may cause fire or explosion. Dispose of or recycle the device, its battery, and accessories according to your local regulations.
• Do not disassemble, hit, crush, or burn the battery. If the battery appears deformed or damaged, stop using it immediately.
  • Do not short circuit the battery, as this may cause overheating, burns, or other injury.
  • Do not place the battery in a high-temperature environment.
  • Overheating may cause explosion.
  • Do not disassemble, hit, or crush the battery, as this may cause the battery to leak, overheat, or explode.
  • Do not burn the battery, as this may cause fire or explosion.
  • If the battery appears deformed or damaged, stop using it immediately.
• User shall not remove or alter the battery. Removal or repair of the battery shall only be done by an authorized repair center of the manufacturer.
• Keep your device dry.
• Do not try to repair the device yourself. If any part of the device does not work properly, contact Mi customer support or bring your device to an authorized repair center.
• Connect other devices according to their instruction manuals. Do not connect incompatible devices to this device.
• For AC/DC adapters, the socket-outlet shall be installed near the equipment and shall be easily accessible.

Safety Precautions

• Observe all applicable laws and rules restricting use of mobile phones in specific situations and environments.
• Do not use your phone at petrol stations or in any explosive atmosphere or potentially explosive environment, including fueling areas, below decks on boats, fuel or chemical transfer or storage facilities, or areas where the air may contain chemicals or particles such as grain, dust, or metal powders. Obey all posted signs to turn off wireless devices such as your phone or other radio equipment. Turn off your mobile phone or wireless device when in a blasting area or in areas requiring “two-way radios” or “electronic devices” to be turned off to prevent potential hazards.
• Do not use your phone in hospital operating rooms, emergency rooms, or intensive care units. Always comply with all rules and regulations of hospitals and health centers. If you have a medical device, please consult your doctor and the device manufacturer to determine whether your phone may interfere with the device’s operation. To avoid potential interference with a pacemaker, always maintain a minimum distance of 15 cm between your mobile phone and the pacemaker. This can be done by using your phone on the ear opposite to your pacemaker and not carrying your phone in a breast pocket. To avoid interference with medical equipment, do not use your phone near hearing aids, cochlear implants, or other similar devices.
• Observe all aircraft safety regulations and turn off your phone on board aircraft when required.
• When driving a vehicle, use your phone in accordance with relevant traffic laws and regulations.
• To avoid being struck by lightning, do not use your phone outdoors during thunderstorms.
• Do not use your phone to make calls while it is charging.
• Do not use your phone in places with high humidity, such as bathrooms. Doing so may result in electric shock, injury, fire, and charger damage.

Security Statement

Please update your phone’s operating system using the built-in software update feature, or visit any of our authorized service outlets. Updating software through other means may damage the device or result in data loss, security issues, and other risks.

Legal Information
This device may be operated in all member states of the EU. Observe national and local regulations where the device is used. This device is restricted to indoor use only when operating in the 5150 to 5350 MHz frequency range in the following countries:

Restrictions in the 2.4 GHz band:
Norway: This subsection does not apply for the geographical area within a radius of 20 km from the centre of Ny-Ålesund.

Receiver Category 2
Ensure the power adapter used meets the requirements of Clause 6.4.5 in IEC/EN 62368-1 and has been tested and approved according to national or local standards.

Disclaimer
This quick start guide is published by Xiaomi or its local affiliated company. Improvements and changes to this quick start guide necessitated by typographical errors, inaccuracies of current information, or improvements to programs and/or equipment, may be made by Xiaomi at any time and without notice. Such changes will, however, be incorporated into new online editions of the quick start guide (please see details at www.mi.com/global/service/userguide). All illustrations are for illustration purposes only and may not accurately depict the actual device.

This smartphone is designed with Corning® Gorilla® Glass 3.

Thank you for choosing Mi 10 Lite 5G

Long press the power button to turn on the device.
Follow the on-screen instructions to configure the device.
For more information, visit our official website:
www.mi.com/global/service/userguide

Product Overview

MIUI

Mi 10 Lite 5G comes pre-installed with MIUI, our customized Android-based OS which provides frequent updates and user-friendly features based on suggestions from over 200 million active users worldwide. For more information, please visit en.miui.com

SIM Card Tray

About Dual SIM:

• Supports Dual SIM cards with no carrier restrictions, single 5G or dual 4G connectivity ①
• Supports Dual Nano-SIM card slots, either card can be set as the primary card
• Supports single SIM 5G/4G+/4G/3G/2G
• Supports Dual SIM 4G+/4G/3G/2G
• Supports Dual SIM VoLTE HD calling ②

Note ①: 5G support depends on the local telecom operator’s network; if the primary card 5G is enabled, the secondary card will not be available; subsequent software upgrades will include support for primary 5G and secondary 4G/3G/2G card mode function in dual-card situations.

Note ②: VoLTE service availability depends on the local telecom operator’s network and service deployment.

• Please do not insert non-standard SIM cards into the SIM card slot. They may damage the SIM card slot.
• WARNING: Do not disassemble this device

WEEE

Special precautions must be taken to safely dispose of this product. This marking indicates that this product may not be discarded with other household waste in the EU.

To prevent harm to the environment or human health from inappropriate waste disposal, and to promote sustainable reuse of material resources, please recycle responsibly.

To safely recycle your device, please use return and collection systems or contact the retailer where the device was originally purchased. To view our Environmental Declaration, please refer to the following link: www.mi.com/en/about/environment

CAUTION

RISK OF EXPLOSION IF BATTERY IS REPLACED BY AN INCORRECT TYPE. DISPOSE OF USED BATTERIES ACCORDING TO INSTRUCTIONS.

To prevent possible hearing damage, do not listen at high volume levels for long periods.

Additional safety information and precautions can be accessed at the following link: www.mi.com/en/certification

Important Safety Information

Read all safety information below before using your device:

• Use of unauthorized cables, power adapters, or batteries can cause fire, explosion, or pose other risks.
• Use only authorized accessories which are compatible with your device.
• This device’s operating temperature range is 0°C to 40°C. Using this device in an environment outside of this temperature range may damage the device.
• If your device is provided with a built-in battery, to avoid damaging the battery or the device, do not attempt to replace the battery yourself.
• Charge this device only with the included or authorized cable and power adapter. Using other adapters may cause fire, electric shock, and damage the device and the adapter.
• After charging is complete, disconnect the adapter from both the device and the power outlet. Do not charge the device for more than 12 hours.
• The battery must be recycled or disposed of separately from household waste. Mishandling the battery may cause fire or explosion. Dispose of or recycle the device, its battery, and accessories according to your local regulations.
• Do not disassemble, hit, crush, or burn the battery. If the battery appears deformed or damaged, stop using it immediately.
  • Do not short circuit the battery, as this may cause overheating, burns, or other injury.
  • Do not place the battery in a high-temperature environment.
  • Overheating may cause explosion. Do not disassemble, hit, or crush the battery, as this may cause the battery to leak, overheat, or explode.
  • Do not burn the battery, as this may cause fire or explosion.
  • If the battery appears deformed or damaged, stop using it immediately.
• User shall not remove or alter the battery. Removal or repair of the battery shall only be done by an authorized repair center of the manufacturer.
• Keep your device dry.
• Do not try to repair the device yourself. If any part of the device does not work properly, contact Mi customer support or bring your device to an authorized repair center.
• Connect other devices according to their instruction manuals. Do not connect incompatible devices to this device.
• For AC/DC adapters, the socket-outlet shall be installed near the equipment and shall be easily accessible.

Safety Precautions 

• Observe all applicable laws and rules restricting use of mobile phones in specific situations and environments.
• Do not use your phone at petrol stations or in any explosive atmosphere or potentially explosive environment, including fueling areas, below decks on boats, fuel or chemical transfer or storage facilities, or areas where the air may contain chemicals or particles such as grain, dust, or metal powders. Obey all posted signs to turn off wireless devices such as your phone or other radio equipment. Turn off your mobile phone or wireless device when in a blasting area or in areas requiring “two-way radios” or “electronic devices” to be turned off to prevent potential hazards.
• Do not use your phone in hospital operating rooms, emergency rooms, or intensive care units. Always comply with all rules and regulations of hospitals and health centers. If you have a medical device, please consult your doctor and the device manufacturer to determine whether your phone may interfere with the device’s operation. To avoid potential interference with a pacemaker, always maintain a minimum distance of 15 cm between your mobile phone and the pacemaker. This can be done by using your phone on the ear opposite to your pacemaker and not carrying your phone in a breast pocket. To avoid interference with medical equipment, do not use your phone near hearing aids, cochlear implants, or other similar devices.
• Observe all aircraft safety regulations and turn off your phone on board aircraft when required.
• When driving a vehicle, use your phone in accordance with relevant traffic laws and regulations.
• To avoid being struck by lightning, do not use your phone outdoors during thunderstorms.
• Do not use your phone to make calls while it is charging.
• Do not use your phone in places with high humidity, such as bathrooms. Doing so may result in electric shock, injury, fire, and charger damage

Security Statement 

Please update your phone’s operating system using the built-in software update feature, or visit any of our authorized service outlets. Updating software through other means may damage the device or result in data  loss, security issues, and other risks.

EU Regulations

RED Declaration of Conformity 

Xiaomi Communications Co., Ltd. hereby declares that this GSM / GPRS / EDGE / UMTS / LTE / 5G NR Digital Mobile Phone with Bluetooth and Wi Fi M2002J9G is in compliance with the essential requirements and other relevant provisions of the RE Directive 2014/53/EU. The full text of the EU declaration of conformity is available at the following internet address: www.mi.com/en/certification

RF Exposure Information (SAR) 

This device is in compliance with Specific Absorption Rate (SAR) limits  for general population/uncontrolled exposure (Localized 10-gram SAR for head and trunk, limit: 2.0W/kg) specified in Council Recommendation 1999/519/EC, ICNIRP Guidelines, and RED (Directive 2014/53/EU).

During SAR testing, this device was set to transmit at its highest certified power level in all tested frequency bands and placed in positions that simulate RF exposure during use against the head with no separation and near the body with a separation of 5 mm.

SAR compliance for body operation is based on a separation distance of 5  mm between the unit and the human body. This device should be carried at least 5 mm away from the body to ensure RF exposure level is compliant or lower than the reported level. When attaching the device near the body, a belt clip or holster should be used which does not contain metallic components and allows a separation of at least 5 mm to be maintained between the device and the body. RF exposure compliance was not tested or certified with any accessory containing metal worn on the body, and use of such an accessory should be avoided.

Certification Information (Highest SAR) 

SAR 10 g limit: 2.0 W/Kg,
SAR Value: Head: 0.793 W/Kg, Body: 1.180 W/Kg (5 mm distance).

Legal Information 

This device may be operated in all member states of the EU. Observe national and local regulations where the device is used. This device is restricted to indoor use only when operating in the 5150 to 5350 MHz frequency range in the following countries:
AT BE BG HR CY CZ DK
EE FI FR DE EL HU IE
IT LV LT LU MT NL PL
PT RO SK SI ES SE UK

Receiver Category 2
Ensure the power adapter used meets the requirements of Clause 6.4.5  in IEC/EN 62368-1 and has been tested and approved according to national or local standards.

Frequency Bands and Power 

This mobile phone offers the following frequency bands in EU areas only and maximum radio-frequency power:

GSM 900: 35 dBm
GSM 1800: 32 dBm
UMTS band 1/8: 25 dBm
LTE band 1/3/7/8/20/28/38/40: 25.7 dBm
5G NR band n1/n3/n7/n28/n77/n78: 26 dBm
Bluetooth: 20 dBm
Wi-Fi 2.4 GHz band: 20 dBm
Wi-Fi 5 GHz: 5150 to 5250MHz: 20 dBm, 5250 to 5350 MHz: 20 dBm,
5470 to 5725 MHz: 20 dBm, 5725 to 5825 MHz: 14 dBm
NFC: 13.56 MHz < -17.6 dBuA/m at 10m

FCC Regulations

This mobile phone complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful
interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. This mobile phone has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation.

This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications.

However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.

RF Exposure Information (SAR) 

This device meets the government’s requirements for exposure to radio waves. This device is designed and manufactured not to exceed the emission limits for exposure to radio frequency (RF) energy. The exposure standard for wireless devices employs a unit of measurement known as Specific Absorption Rate, or SAR. The SAR limit set by the FCC is 1.6 W/Kg. For body-worn operation, this device has been tested and meets the FCC RF exposure guidelines for use with an accessory that contains no metal and positions the device a minimum of 1.5 cm from the body. RF exposure compliance with any body-worn accessory that contains metal was not tested and certified, and use of such body-worn accessory should be avoided. Any accessory used with this device for body-worn operation must keep the device a minimum of 1.5 cm away from the body.

FCC Note 

Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.

E-label 

This device has an electronic label for certification information.
To access it, please go to Settings > About phone > Certification, or open Settings and type “Certification” into the search bar . Model: M2002J9G 2002 indicates that this product will be launched after 202002.

Disclaimer

This User Guide is published by Xiaomi or its local affiliated company. Improvements and changes to this User Guide necessitated by typographical errors, inaccuracies of current information, or improvements to programs and/or equipment may be made by Xiaomi at any time and without notice. Such changes will, however, be incorporated into new editions of this User Guide. All illustrations are for reference purposes only and may not accurately depict the actual device.

This smartphone is designed with Corning® Gorilla® Glass 5.

Mi Smart Air Fryer (3.5L)
User Manual

Read this manual carefully before use, and retain it for future reference. Thank you for choosing the Mi Smart Air Fryer (3.5L). This product is for household use only. Illustrations of product, accessories and user interface in the user manual are for reference purposes only. Actual products and functions may vary due to product enhancements.

Safety Instructions

• This appliance can be used by children aged from 8 years and above and persons with reduced physical, sensory or mental capabilities or lack of experience and knowledge if they have been given supervision or instruction concerning the use of the appliance in a safe way and understand the hazards involved.
• Children shall not play with the appliance.
• Cleaning and user maintenance shall not be made by children unless they are older than 8 and supervised.
• Keep the appliance and its cord out of reach of children less than 8 years.
• Household use only. If the supply cord is damaged, it must be replaced by the manufacturer, its service agent or similarly qualified persons in order to avoid a hazard.
• The temperature of accessible surfaces may be high when the appliance is operating.
• The surfaces are liable to get hot during use.
• The appliances are not intended to be operated by means of an external timer or separate remote control system.
• Do not block the air fryer’s air inlet and outlets, nor the heat dissipation vents during use to avoid affecting its normal heat dissipation.
• Do not modify the internal wiring of the air fryer.
• Do not use charcoal or other similar fuel sources to heat the basket, frying plate, or grill.
• Do not place the basket on any other heat sources, such as an induction cooker or gas stove.
• Do not plug or unplug the power cord with wet hands to avoid the risk of an electrical shock.
• Do not use a power cord with a loose connection or poor contact.
• Do not let the power cord cross through sharp objects to avoid damage to the power cord.
• Do not use the air fryer to store any items, especially flammable, explosive, or corrosive items.
• Do not excessively pinch, bend, twist, or place heavy objects on the power cord to prevent it from exposing or breaking its core.
• Stop using the air fryer immediately and unplug it from the power source if it doesn’t function normally or malfunctions.
• The air fryer cannot be started without the basket is in place.
• Do not let children near the air fryer during or right after use to avoid them from getting scalded.
• Do not allow children to play with plastic packaging bag to avoid suffocation accidents.
• Do not use any plastic utensils or any wrapping materials which may melt or poison/affect the food to wrap food for cooking.
• Do not drop this air fryer or bump it against hard objects to avoid damage or malfunction.
• Do not insert pins, wires or other objects into any of the openings of the air fryer to avoid an electrical shock or injury.
• Do not use any accessories that are not recommended by the manufacturer.
• Keep a distance of 30 cm or more between the air outlets and other devices, during use.
• Do not move or shake the air fryer during use.
• Do not insert any foreign objects into the safety switch, to avoid any danger.
• When placing the air fryer in a kitchen cabinet, etc., please ensure that it is well ventilated.
• Ensure that the air fryer is unplugged before cleaning or repairing it.
• This product must be used on a level, the heat-resistant surface to avoid damage to the product or accidents.
• Ensure that the silicone parts of the air fryer do not come into contact with ethanol or solutions that contain more than 50% of alcohol.
• Please ensure that the electrical outlet the air fryer is plugged into is well-grounded to avoid an electrical shock or other safety hazards.

Hereby, Ningbo Careline Electric Appliance Co., Ltd. declares that the radio equipment type Air Fryer MAF02 is in compliance with Directive 2014/53/EU. The full text of the EU declaration of conformity is available at the following internet address: http://www.mi.com/global/service/support/declaration.html For detailed e-manual, please go to www.mi.com/global/service/userguide

Product Overview

Notes: 1. The silicone rubber used in the air fryer is made of high-temperature-resistant food-grade materials to prevent the edges of the frying plate from scratching the coating of the basket and to improve the stability of the frying plate. Do not remove the silicone rubber from the frying plate.
Ingredients that are too small are not suitable for use on the grill. Please make sure that ingredients don’t fall through the gaps in the grill.
Control Knob

How to Use

Connect the power cord and press the power button to turn on the air fryer.
Note: Press the power button to turn on the air fryer for the first time, ,, Enable Wi-Fi” will be displayed, if you do not operate it for 30 seconds or select No, the Wi-Fi will remain disabled, and if you select Yes, the Wi-Fi indicator will blink and Wi-Fi will be enabled.

1. Turning on
   Connect the power cord and press the power button to turn on the air fryer.
2. Turning off
   Press the power button to turn off the air fryer, regardless of the state it is in.
3. Configuring the Wi-Fi

1. Resetting the Wi-Fi
Press the control knob to enter “Reset Wi-Fi” while in the “Wi-Fi” screen, then press the control knob to select Yes to reset the Wi-Fi, or turn the control knob to select No to abandon resetting the Wi-Fi.
2. Enabling/Disabling the Wi-Fi
Press the control knob to enter “Enable/Disable Wi-Fi” while in the “Wi-Fi” screen, then press the control knob to select Yes to enable or disable the Wi-Fi, or turn the control knob to select No to abandon the change.
Wi-Fi Status

Awaiting connection …	Reconnecting after a disconnection…	Connected successfully	Updating…
Wi-Fi indicator blinks slowly	Wi-Fi indicator blinks quickly	Wi-Fi indicator is on continuously	Wi-Fi indicator blinks twice

Note: If it does not connect to the Wi-Fi for 30 minutes, the Wi-Fi indicator will turn off.
4. Connecting with Mi Home/Xiaomi Home App
This product works with the Mi Home/Xiaomi Home app*
Use the Mi Home/Xiaomi Home app to control your device, and to interact with other smart home devices.
https://home.mi.com/download
Scan the QR code to download and install the app. You will be directed to the connection setup page if the app is installed already. Or search “Mi Home/Xiaomi Home” in the app store to download and install it.
Open the Mi Home/Xiaomi Home app, tap “+” on the upper right, and then follow prompts to add your device.
Note: In order to improve the user’s experience, the device’s firmware and the Mi Home/Xiaomi Home app interface will be updated from time to time, so if you encounter any interface experience that is not consistent with this manual, please refer to the actual product.
How to Use
Preparations
The ingredients can be marinated to taste before cooking.
Starting a cooking program
1. Place the air fryer on a stable, level surface and ensure that there is air circulation around the air fryer.
2. Place the frying plate into the basket and add the ingredients one by one. If there are more ingredients, use the grill to place them in two layers.
Note: Stacking ingredients without using the grill will affect the cooking.

3. Once the basket is completely inserted into the air fryer, press the power button to turn it on, and turn the control knob to select the menu for the corresponding cooking program and press the control knob to confirm. Then press the control knob to select the amount Quantity Half Full of ingredients (single layer/half/full/double layer), and finally press the control knob to confirm and start cooking.

Notes:

1.  The cooking time and temperature can be adjusted by turning the control knob during cooking.
2. Once you turn the control knob to adjust the cooking time or temperature, you need to press the control knob to confirm, otherwise, it will continue to cook at the original time and temperature after five seconds.
3. Some ingredients need to be turned over during cooking, please follow the air fryer’s instructions and pull out the basket to turn over the ingredients, then place the basket completely back into the air fryer and press the control knob to continue cooking.
4. The air fryer will beep and “Program completed” will appear on the display to indicate that the cooking program has been completed. Carefully take out the basket and use clamps to remove the food. Caution: When cooking is completed, the basket is very hot, so do not touch it to avoid getting scalded.

Other Operations

1.  Language settings
   Turn the air fryer, go to settings, and press the control knob to enter the language selection screen.
   Turn the control knob to the desired language and press it to confirm.
2. Manual mode
   While standby, turn the control knob and select the manual mode, press it to set the temperature and turn it to adjust to the desired cooking temperature, then press it to set the time and turn it to adjust to the desired cooking time and press it to start the above set program.
   
3. Turning over the food
   If the cooking time is more than 8 minutes (except for cake and dried fruits), the air fryer will remind you to turn over or shake the food. “Please shake the food” will blink on the display screen, and it will beep three times. Please pull out the basket, turn over or shake the food, and then completely insert the basket back into the air fryer.
   
4. Scheduled cooking
   While standby, turn the control knob and select the schedule function, set the completion time, cooking program, cooking temperature, and time, and press the control knob to confirm and start the scheduled cooking program. Once the scheduled time is over, the air fryer has completed the scheduled cooking program.
   Note: The scheduled time here is the scheduled completion time, for example, six hours, which means cooking will be completed in six hours, and the scheduled time cannot be shorter than the cooking time
5. PausingPress the control knob to pause the cooking program while cooking.
   Paused Press the control knob to continue the cooking program while it is paused.
6. Stopping the program
   Press and hold the control knob for 0.5 seconds, the display screen indicates to confirm the cancellation of the current cooking program, turn the control knob and select yes or no. Once canceled, it will enter standby mode.

Maintenance Tips

• Only professionally trained and qualified technicians should repair the air fryer.
• Others should not repair the air fryer without permission to avoid serious consequences.
• When the air fryer is acting abnormally, please refer to Troubleshooting before contacting customer service.
• If the issue cannot be resolved, please unplug the power cord disconnect it, and contact after-sales service.

Cleaning & Maintenance

Unplug the power cord before cleaning and maintaining the air fryer, and wait for it to cool down to room temperature or a safe temperature before operating it. Please remove the basket when cleaning the inside of the air fryer.

1. Air fryer surface
   The surface of the air fryer can be wiped with a dry, soft cloth or a sponge moistened with a neutral cleaning detergent.
2. Cavity
   To remove stains from the inside of the air fryer, apply a suitable amount of detergent diluted in hot water to its surface and let it sit for about 10 minutes, then use a soft sponge moistened with water to wipe away the detergent residue.
3. Basket
   Clean the air fryer after each use. The basket of the air fryer is coated, so do not use any steel wool or other abrasive cleaning materials to clean it as they may damage the coating.
4. Frying plate/Grill
   You can use a soft, cotton cloth or sponge moistened with neutral detergent to wipe it clean, then moisten it with water to wipe away the detergent residue.

Note: The basket, frying plate, and grill can be separated and placed in the dishwasher for cleaning, but the air fryer cannot be washed in water or cleaned in the dishwasher.

Cleaning Precautions

1. After using the air fryer, please unplug the power plug-in time and do not place the air fryer near a source of fire nor immerse it in water. Do not place the power plug directly on the air fryer to prevent the plug from scratching its surface.
2. Cleaning and maintenance should only be done after the air fryer has cooled down.
3. Do not use any corrosive or abrasive cleaning materials or detergents.

Note: Regular cleaning and maintenance of the air fryer will help to extend its service life.

Troubleshooting

Electrical Diagram

1. OLED Display
2. Safety Switch
3. Control Panel
4. High-speed Motor
5. Fuse
6. Low-speed Motor
7. Heating Element
8. Power Board
9. Fuse

Specifications

Under normal use of conditions, this equipment should be kept a separation distance of at least 20 cm between the antenna and the body of the user
All products bearing this symbol are waste electrical and electronic equipment (WEEE as in directive 2012/19/EU) which should not be mixed with unsorted household waste. Instead, you should protect human health and the environment by handing over your waste equipment to a designated collection point for the recycling of waste electrical and electronic equipment, appointed by the government or local authorities. Correct disposal and recycling will help prevent potential negative consequences to the environment and human health. Please contact the installer or local authorities for more information about the location as well as terms and conditions of such collection points.

Manufactured for: Xiaomi Communications Co., Ltd.
Manufactured by: Ningbo Careline Electric Appliance Co., Ltd.
Address: 558#, Wei’er Road, Andong Industrial Zone, Andong Town,
Cixi, Ningbo, Zhejiang, China
For further information, please go to www.mi.com
Importer: Beryko s.r.o.
Na Roudné 1162/76, 301 00
Plz www.beryko.cz
User Manual
Version: V1.0

Xiaomi MDZ-22-AB Mi Box HDR Android TV Box

SPECIFICATIONS

• Brand Xiaomi
• Connectivity Technology Wi-Fi
• Supported Internet Services Netflix, Prime Video, Hulu, Vudu, YouTube
• Controller Type Remote Control, Voice Control
• Item Weight 3.6 Ounces
• Ram Memory Installed Size 8 GB
• Compatible Devices Television
• Memory Storage Capacity 8 GB
• Product Dimensions 0.39 x 3.82 x 3.82 inches
• Item Weight 3.6 ounces
• Item model number MDZ-22-AB

WHAT’S IN THE BOX

• Mi Box HDR Android TV Box
• Remote Control
• Installation guide

DESCRIPTION

The Xiaomi MDZ-22-AB Mi Box HDR Android TV Box is a popular streaming device produced by Xiaomi, a leading Chinese electronics company. The Mi Box is designed to provide users with an enhanced entertainment experience by enabling them to stream a wide variety of content directly to their TV. Running on the Android TV operating system, the Mi Box offers access to a vast selection of apps and services through the Google Play Store for TV. This allows users to enjoy their favorite streaming platforms, such as Netflix, YouTube, Hulu, and more, directly on their TV screens. One of the Xiaomi MDZ-22-AB Mi Boxes is its supports for 4K Ultra HD resolution, ensuring that users can enjoy a high-quality viewing experience with crisp and detailed visuals. Additionally, the Mi Box also supports High Dynamic Range (HDR) content, which enhances the contrast and color reproduction for a more vibrant and lifelike picture.

Connectivity is another key aspect of the Mi Box. It features built-in Wi-Fi and Bluetooth capabilities, allowing users to connect wirelessly to their home networks and pair with other compatible devices. The device is typically equipped with USB and HDMI ports, enabling easy connection to external storage devices and other peripherals. The Mi Box also integrates Google Assistant, enabling users to control their TV and smart home devices using voice commands. By utilizing the built-in Google Cast functionality, users can cast content from their smartphones, tablets, or computers directly to the Mi Box and enjoy it on the larger screen.

Overall, the Xiaomi MDZ-22-AB Mi Box HDR Android TV Box offers a convenient and feature-rich solution for streaming and enjoying a wide range of content on the TV. Its 4K Ultra HD support, HDR compatibility, and integration with the Android TV ecosystem make it a popular choice among users seeking an affordable and versatile streaming device.

PRODUCT USAGE

The Xiaomi MDZ-22-AB Mi Box HDR Android TV Box is a versatile device that allows you to transform your regular television into a smart TV. Here are some common ways to use the product:

• Media Streaming:
  The Mi Box enables you to stream your favorite movies, TV shows, and videos from popular streaming services such as Netflix, Hulu, YouTube, and more. You can access a wide range of content directly on your TV.
• Android TV Apps:
  The Mi Box runs on the Android TV operating system, providing access to a vast library of apps and games available on the Google Play Store. You can install apps for entertainment, news, sports, music, productivity, and much more.
• Casting and Mirroring:
  The Mi Box supports casting and mirroring functionality, allowing you to mirror your smartphone, tablet, or computer screen onto your TV. You can easily display photos, videos, or presentations from your mobile devices on a larger screen.
• Voice Control:
  The Mi Box comes with a voice remote control that supports voice commands. You can use voice search to find movies, TV shows, apps, and other content without typing.
• Gaming:
  The Mi Box supports gaming applications and Bluetooth gamepads. You can download and play a variety of Android games on your TV, enjoying an immersive gaming experience.
• Music Streaming:
  With the Mi Box, you can stream music from popular services like Spotify, Pandora, and Google Play Music directly on your TV. Enjoy your favorite tunes in high quality through your home entertainment system.
• Web Browsing:
  The Mi Box allows you to browse the internet on your TV using popular web browsers available on the Android TV platform. You can search the web, read articles, and access websites conveniently from your living room.
• Personal Media Playback:
  The Mi Box supports various media file formats, so you can play your own videos, photos, and music from external storage devices like USB drives or network storage devices.
• Live TV and DVR:
  The Mi Box can be used in combination with compatible live TV streaming services or digital TV tuners to watch live TV channels and even record shows with DVR functionality.
• Home Automation Control:
  The Mi Box can serve as a central hub for controlling your smart home devices. You can use compatible apps to control lights, thermostats, security cameras, and more, all from the convenience of your TV.
• Parental Controls:
  The Mi Box offers parental control features, allowing you to set restrictions on content access and create separate profiles for family members with customized settings.
• Multi-room Audio:
  If you have multiple Mi Box devices, you can use them in different rooms to create a multi-room audio system. Stream synchronized music throughout your home for a seamless audio experience.
• Software Updates:
  The Mi Box regularly receives software updates from Xiaomi, ensuring that you have access to the latest features, improvements, and security patches.
• Screen Saver and Ambient Mode:
  The Mi Box can display screensavers or ambient mode visuals on your TV when not in use, enhancing the aesthetic appeal of your living space.

These are just some examples of how you can use the Xiaomi MDZ-22-AB Mi Box HDR Android TV Box. The device offers a wide range of features and functionalities to enhance your TV viewing and entertainment experience.

FEATURES

• Operating System:
  The Mi Box runs on the Android TV operating system, providing access to a wide range of apps and services available on the Google Play Store for TV.
• High Dynamic Range (HDR):
  The Mi Box supports HDR content, allowing for enhanced contrast and more vibrant colors when connected to an HDR-compatible TV.
• 4K Ultra HD Support:
  It is capable of streaming and playing 4K Ultra HD content, providing a crisp and detailed viewing experience on compatible TVs.
• Google Cast:
  The Mi Box has built-in Google Cast functionality, allowing you to cast content from your smartphone, tablet, or computer directly to the TV.
• Google Assistant:
  With the Mi Box, you can use the built-in Google Assistant to control your TV and smart home devices using voice commands.
• USB and HDMI Ports:
  It features a USB port and an HDMI output, allowing you to connect external storage devices, and peripherals, and easily connect to your TV.
• Dolby Audio and DTS Surround Sound:
  The Mi Box supports various audio formats, including Dolby Audio and DTS surround sound, providing an immersive audio experience when connected to compatible audio systems.
• Storage and Memory:
  The device typically comes with 8GB or 16GB of internal storage for apps and media content. It may also feature 2GB or 3GB of RAM for smooth multitasking.
• Remote Control:
  The Mi Box usually includes a dedicated remote control for easy navigation and control of the Android TV interface.
• Connectivity:
  The Mi Box supports Wi-Fi and Bluetooth connectivity, enabling wireless streaming and connecting to other devices such as game controllers or audio systems.

FREQUENTLY ASKED QUESTIONS