Package contents

• micro-USB charging cable
  
• Large silicon Ear-trip
  
• Large Ear-fans
  
• Medium silicon Ear-trips
  
• Medium Ear- fins
  
• TREBLAB N8 Earbuds
  
• Small silicone Ear-trips
  
• Small Ear-fins
  

Earbuds Function

Wearing Method

(Ear – fins)
Using the correct size ear-tips and ear-fins is critical for maximum external noise isolation and a snug secure fit. It is also common to have different sized ear canals so try the eartips and ear-fins one at a time to find the best fit for each side.

1. Identify the left and right ear-tips. Look for L/R mark near the round hole in the ear-fin, which is used to fix It on the earbud. Then choose the size that best fits each ear – 5, M or L.
2. Place the assembled earbud with the ear-tip in your ear canal and tuck the ear-fin into the front ear fold facing up. Adjust the ear-fin to a suitable angle until you have a tight and snug fit.
3. Please try various supplied ear-tips and ear-fins to find comfortable and better fit.

• Ear-tips
  
• Ear left , Right
  

To change the silicone ear-tips comfortably, kindly follow the next steps

1. Fix the rubber ear-fin in the hooking position (you can remove it entirely for better fitment)
2. Turn over the ear-tip upper cover
3. Rotate and push the ear-tip tube to cover the ear-tip pillar forcefully.
   

Charge the earbuds

1. When earbuds’ battery is low level, there will be a ‘Battery Low” voice prompt in your earbuds, and a red light flashing every 5 seconds.
2. Using the provided USB/micro-USB cable, connect the micro-USB end of the charging cable to the micro•USB charging port and the standard USB end to a PC USB port or USB charger
3. The LED indicator will be red while charging. It will turn blue after 1-2 hours. The battery is now fully charged.

Pairing

1. Press and hold POWER button for 4 seconds. You will hear “Power ON” voice prompt in the right earbud. Keep pressing POWER button for 2 more seconds until you hear”Pairing” voice prompt. Release your finger (Red and blue LED lights will flash rapidly).
2. Turn the Bluetooth mode on your device and keep it within 3 feet / 1 meter from the earbuds while pairing.
3. Using your device, scan/search for available Bluetooth devices (check your device’s manual if you’re unsure how to do this).
4. Select TREBLAB N8 from the list..
5. If prompted by your device to connect, select YES.

You will hear”Connected” after successful pairing, and the LED will start flashing blue every 5 seconds.

When you turn the earbuds ON, they will try to reconnect with the most recently connected device. If re-connection does not happen automatically, the earbuds will try to find the next device in the pairing list.

TREBLAB N8 can be paired to only 1 device at a time. To connect N8 to another device, temporarily switch OFF the Bluetooth mode on the first device you connected to.

Repeat steps 1-8 and connect the other device. Turn Bluetooth mode back ON for the first device.

After the connection is lost, the N8 will try to reconnect automatically to the last paired device.

Phone calls

• To answer an incoming call: Single click POWER button.
• To reject an incoming call: Double click POWER button.
• To finish the conversation: Single click POWER button while on the line.

Troubleshooting

Restore factory settings

1. Go to your device’s Bluetooth menu and delete TREBLAB N8 from the list of paired devices, by clicking “Forget this device”. Turn your device’s Bluetooth then turn it back ON; TREBLAB N8 will be deleted.
2.  Press and hold Volume+ and Volume- buttons simultaneously for 3-5 seconds, until blue and red LED flashes 3 times.
3.  Power OFF the earbuds then turn back ON and follow the instructions for pairing.

Safety Rules

•  Never disassemble or modify your headset for any reason. Doing this may cause the headset to malfunction or become combustible. The damage to your device can void your manufacturers warranty.
• Do not allow your device to get wet – liquids can cause serious damage. Water damage to your device can void your manufacturer’s warranty.
• Excessive sweating may damage the product. Make sure to wipe the
  headphones dry before charging.
• Avoid exposing TREBLAB N8 to extreme temperatures (below 37°F /3°C or above 112°F / 45°C). Extreme temperatures can cause deformation of N8 components, reduce battery life and the lifespan of your new earbuds.
• Avoid putting device’s LED lights close to the eyes of children or animals.
• Do not use your N8during a thunderstorm. Thunderstorms can cause serious malfunction and increase the risk of electric shock.

Battery information

• Your device is powered by a rechargeable battery.
• Unplug the headphones from the electrical plug when not in use.
• If left unused, a fully charged battery will lose its charge over time.
• We recommend a full charge twice a month to ensure battery integrity.
• Please do not leave the device (and charging dock) in hot or cold places, such as in a closed car in summer or winter conditions because this will reduce the capacity and lifetime of the battery.
• Do not dispose of the batteries in a fire as they may explode.
• Batteries may also explode if damaged.

Recycling

The earbuds can be recycled, and they should be in order to keep our planet
clean. Where should you take them?

In the US, there are a couple of options:

1. Best Buy has a recycling program.
   Just take the broken earbuds with you next time you visit a BestBuy store.
   This
   link will help you to find the most convenient location:
   httos://www.bestbuv.com/site/store-locator/
2.  Check for other possible locations near you on these websites (just enter your ZIP to find a location): httos://search.earth911.com httos://recyclenation.com/find httos://www.cta.tech/Consumer-Resources/Greener-Gadgets

In Canada, please visit the link below for help: https://thinkreuse.net In UK,please visit the link below for help: https://www.recycle-more.co.uk/

Specifications

Thank you

We truly appreciate that you chose TREBLAB as your trusted brand of wireless earbuds and sincerely hope that you enjoy the great sound and seamless usability TREBLAB NB provides. We love making our customers happy by providing true value with our products.

If for any reason you are not completely satisfied with your purchase or have any questions, please visit www.treblab.com and click Support Contact Us. We care about our customers more than anything and are always here to serve you.

One Year Warranty

ONE YEAR PARTS AND LABOR WARRANTY.

Please visit www.treblab.com to register YOUR product.

Thank you for choosing TREBLAB FX100!

This speaker provides superior sound quality and mobility combined with rugged construction and the convenience of hands-free wireless operation.

WHAT’S IN THE BOX

• User’s manual
• Insert card
• Speaker
• Carabiner
• 5mm Audio cable
• Round TREBLAB sticker
• Charging cable

BUTTONS AND PARTS

Disconnect from the source device – Press the PLAY / PAUSE button for 2 seconds.
SETTING UP YOUR FX100
Turn ON Press and hold the POWER button for 3 seconds. You will hear the “BLUETOOTH MODE” voice prompt and the BLUE and RED LED light will start flashing.

Turn OFF

Press and hold the POWER button for 2 seconds. You will hear the “POWER OFF” voice prompt and the flashing BLUE LED light will turn OFF.

WIRELESS PAIRING

Make sure TREBLAB FX100 is charged and that the 3.5mm audio cable is not plugged in.

1. Turn on your speaker by pressing and holding the POWER button for 3 seconds. You will hear the “POWER ON” and “BLUETOOTH MODE’ voice prompt and the LED light will start flashing RED and BLUE indicating that the speaker is in pairing mode.
2. Activate the Bluetooth mode on your smart device.
3. Select TREBLAB FX100 from the available Bluetooth devices list. Keep it within 3 feet/1 meters from the speaker while pairing.
4. If necessary, enter the passcode 0000.
5. Once FX100 is successfully paired and connected, you will hear the “CONNECTED” voice prompt and the LED will light up BLUE

REPAIRING

After the initial pairing, the speaker will automatically connect to the previously paired device when turned on again. If the reconnection does not happen automatically, the speaker will start looking for any other previously paired device within the effective distance range. TREBLAB FX100 can save up to 2 recently paired devices.

TRUE WIRELESS STEREO (TWS) – PAIRING TWO SPEAKERS

• Place two FX100 (BT5.0 version) speakers near each other (the distance should not be over 3feet / (meter)
• Power on both speakers. You will hear the TOWER ON’ and “BLUETOOTH MODE” voice prompts.
• Press twice the PHONE button on any of the speakers this speaker will be the main one. After some time you will hear the “LEFT CHANNEL” and “RIGHT CHANNEL” prompts from TWS connected speakers.

NOTE: While the speakers are TWS paired, you can manage their functions using the buttons on both of them. You can disable the TWS mode by turning off one of the speakers or turning on the FM/Line-in mode on any of them.

AUDIO PLAYBACK

To pause and resume the playback when connected wirelessly, press the PLAY / PAUSE button.
To adjust the volume, press and hold the VOLUME + or the VOLUME – button while listening to music.
To change the track on FX100, press the VOLUME + or the VOLUME – button.
PHONE CALLS
TREBLAB FX100 can be used to make and receive phone calls when connected wirelessly. Audio playback will be paused during the calls.

To answer a call: Press the PHONE button.
Press and hold the PHONE button for 2 seconds To Reject a call: during the phone call.
To end a call:  Press the PHONE button during the phone call.
Multics*:  Press shortly the PHONE button to answer the first call. When the second one is incoming, press the PHONE button to pick it up. The first call will enter into the hold-on status. Press the PHONE button again to end the current (second) call. Press shortly again to hang up the first one.

– To be able to use this option, your device needs to support the multi calls management.
NOTE: For better call quality, speak into the microphone.
LINE-IN MODE. AUDIO CABLE CONNECTION
You can connect TREBLAB FX100 to compatible devices using the supplied 3.5mm audio cable. Turn on the speaker. Plug one end of the 3.5mm audio cable into the 3.5mm cable port on the edge of the speaker (under the cover) you will hear the “LINE-IN MODE” prompt Plug the other end Into the 3.5mm jack on your device.
Now you can play music and audio.

NOTE: On-device control is not supported for the VOLUME, NEXT, PREVIOUS and PAUSE functions when using the 3.5mm audio cable. Phone calls management using the PLAY / PAUSE button is not supported. To make adjustments, you will need to use your smart device.

FM MODE

TREBLAB FX100 supports the FM listening feature. FM mode can be turned on from both the Line-in and Bluetooth modes by pressing twice the POWER button. For a good level of FM signal, you will need to plug in the 3.5mm audio cable. Only with the connected 3.5mm audio cable, you can receive the needed signal level!
To scan for available FM channels, press the PLAY / PAUSE button. After scanning you can change FM channels by pressing the VOLUME+ / VOLUME -button.

NOTE: If after connecting with the 3.5 mm audio cable, the speaker turned to Line-in mode, just press the POWER button twice to return to FM mode.

SOUND MODES
TREBLAB FX100 speaker is equipped with BASS BOOST mode to improve the bass reproduction when using it outdoors. Just short press the POWER button to enable BASS BOOST mode.
CHARGING
The FX100 speaker comes with a 7200 mAh rechargeable battery. One full battery charge provides up to 16 hours of playtime at maximum volume and up to 35 hours at 35% volume. When the battery is running low, you will hear a voice prompt.
TREBLAB FX100 may be used while charging in Bluetooth mode, FM-mode. and Line-in 3.5 mm audio cable mode. Also, you can use the speaker while it is used as a power bank.
To charge the speaker, plug one end of the cable supplied into the Micro USB Input charging port under the rubber cover at the side of the speaker. Plug the other end of the charging cable into a standard USB port or wall adaptor. It takes up to 10 hours to fully charge.

Be sure to use 5V, 2A adapter or charger. Using a power source with lower power will increase the overall charging time. If the speaker is left unused, even the fully charged battery will lose its charge over time. We recommend charging TREBLAB FX100 fully at least twice a month to maintain sufficient battery life.

The FX100 speaker is equipped with charge level indicators – LEDs. The current charge level is displayed while charging.

1. Charge level is between 0% and 25%: the 25% indicator will begin to flash.
2. Charge level is between 25% and 50%: the 50% indicator will begin to flash.
3. Charge level is between 50% and 75%: the 75% indicator will begin to flash.
4. Charge level is between 75% and 100%: the 100% indicator will begin to flash.

POWER BANK MODE

TREBLAB FX100’s inbuilt battery can be used as a power bank to charge your smartphone or tablet.

1. Connect your device to the speaker by plugging your device’s charging cable into the USB 2.0 output port at the side of
2. Press the DC OUT button to start charging. LEDs that correspond to the current battery charge level will light up.
3. There is no LED indication signal when the smart device is fully charged. Please pay attention to your device’s battery charge indicator during the charging time.

TROUBLESHOOTING

RECYCLING

The speakers can be recycled, and they should be in order to keep our planet clean. Where should you bring them?

In the US, there are a couple of options:

1. Best Buy has a recycling program. Just take the broken speaker with you next time you visit a Best Buy store. This link will help you find the best location:

https://www.bestbuy.com/sitelstore-locator/

2. Check for other possible locations near you on these websites Oust enter your ZIP to find a location https://www.call2recycle.org

https://search.earth911.com

SAFETY RULES

• Don’t disassemble or modify your speaker for any reason. Doing this may cause the speaker to malfunction or become combustible. The damage to your device can void the manufacturer’s warranty.
• Make sure the speaker is completely dry before charging. Clean only with a dry cloth.
• Avoid exposing TREBLAB FX100 to extreme temperatures (below 37°F / 3°C or above 112°F/45°C). Extreme temperatures can cause the deformation of the FX100 components and reduce the battery life and the lifespan of your new speaker.
• Don’t put the device’s LED lights close to humans’ or animals’ eyes.
• Do not use FX100 during a thunderstorm. Thunderstorms can cause serious malfunction and increase the risk of electric shock.

SPECIFICATIONS

Battery: Up to 35 hours playtime (moderate volume Up to 16 hours (100% volume) 7200 mAh 3.7V, rechargeable Li-Ion Input 5V /1A, Output 5V /1A
Charging time: Up to 10 hours
Wireless connection version: 5.0, HFP, A2DP, AVRCP, GAVDP, AVDTP, SPP, AVCTP
Signal Range: 33ft/10m
Output power: 5W x 2
Frequency response: 80Hz-20KHz
Water resistance: Power/Charging ports: IPX4
Voice assistant activation: USB 2.0, Micro USB
Dimensions: 2.75 x 2.75 x 7 inches/70 x 70 x 180mm 
Weight: 1.34Ibs/ 609g

THANK YOU

We truly appreciate that you chose TREBLAB as your trusted brand of Bluetooth speakers and sincerely hope you enjoy the great sound and seamless usability TREBLAB FX100 provides. We love making our customers happy by providing true value with our products. If for any reason you are not completely satisfied with your purchase or have any questions, please visit www.treblab.com/contact_us. We care about our customers most of all and are always here to serve you.

1 YEAR WARRANTY Parts and Labor Warranty.
Please visit www.treblab.com to register YOUR product. Manufactured by: Productech Corp

FX100
BLUETOOTH SPEAKER

http://l.ead.me/bazOVB