Quick Start Guide
DITTO LOOPER

Visit musictribe.com to download the full manual

V 1.0
A54-00002-68628

Controls

1.  Loop level – Adjusts the level of the looped audio.
2. Output
3. Footswitch – Controls various looping functions. See Footswitch Controls page for details.
4. USB – Connect to your computer for firmware updates.
5. Power – Connect a 9 V / >100 mA power supply.
6. Input

Footswitch Controls

NOTE: When the loop is clear, DITTO turns off and returns to true bypass

FEDERAL COMMUNICATIONS
COMMISSION COMPLIANCE INFORMATION

TC Electronic
DITTO LOOPER

Responsible Party Name: Music Tribe Commercial NV Inc.
Address:
5270 Procyon Street,
Las Vegas NV 89118,
United States

Phone Number: +1 702 800 8290

DITTO LOOPER

This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined  by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.

This device complies with Part 15 of the FCC rules. Operation is subject to the following two conditions:
(1) this device may not cause harmful interference, and
(2) this device must accept any interference received, including interference that may cause undesired operation.
Important information:
Changes or modifications to the equipment not expressly approved by Music Tribe can void the user’s authority to use the equipment.

Hereby, Music Tribe declares that this product is in compliance with Directive 2014/30/EU, Directive 2011/65/EU and Amendment 2015/863/EU, Directive 2012/19/EU, Regulation 519/2012 REACH SVHC and Directive 1907/2006/EC.
Full text of EU DoC is available at https://community.musictribe.com/
EU Representative: Music Tribe Brands DK A/S
Address: Ib Spang Olsens Gade 17, DK – 8200 Aarhus N, Denmark

Quick Start Guide
DITTO X4 LOOPER
Simple and Intuitive Dual-Track Guitar Looper Pedal with Powerful Loop Effects

Controls

1. STORE/LEVEL switches – Briefly flip the switch up to store the current loop as a backing track, or hold up for 3 seconds to delete the stored backing track. Hold the switch in the down position while turning the associated LOOP knob to adjust the level of the backing track.
2. LOOP knobs – Adjust the level of a loop or backing track.
3. SERIAL/SYNC switch – When set to Serial, either loop 1 or 2 can be played at a time. In Sync mode, both loops can be played simultaneously.
4. DECAY knob – Controls the amount of volume reduction that occurs each time an overdub repeats.
5. FX knob – Selects one of the 7 FX options.
6. LOOP 1 and 2 footswitches – Use these to control several loop-related functions. (see reverse side)
7. STOP footswitch – Press to stop both loops immediately. Hold to erase the loops.
8. FX footswitch – Press to engage the selected loop FX.
9. INPUT jacks – Connect one ¼” TS cable for mono operation or 2 cables for stereo.
10. OUTPUT jacks – Send audio via one or two ¼” TS cables.
11. Power input – Connect the 9V power supply. (9 V DC, >300 mA)
12. MODE switches – Adjust fine details of pedal’s operation. See the full manual for details.
13. USB input – Connect to a computer to transfer files back and forth, and for firmware updates.
14. MIDI jacks – Allows connection of an external MIDI clock and program and CC changes from a MIDI controller.

IMPORTANT SAFETY INSTRUCTION

Before operating the device, please see “Important Safety Instructions” on page 3 of the full manual. Visit tcelectronic.com to download the full manual

LEGAL DISCLAIMER
Music Tribe accepts no liability for any loss which may be suffered by any person who relies either wholly on or in part upon any description, photograph, or statement contained herein. Technical specifications, appearances and other information are subject to change without notice. All trademarks are the property of their respective owners. Midas,  Klark Teknik, Lab Gruppen, Lake, Tannoy, Turbosound, TC Electronic, TC Helicon, Behringer, Bugera, and Coolaudio are trademarks or registered trademarks of Music Tribe  Global Brands Ltd. © Music Tribe Global Brands Ltd. 2021 All rights reserved.
LIMITED WARRANTY
For the applicable warranty terms and conditions and additional information regarding Music Tribe’s Limited Warranty, please see complete details online at musictribe.com/warranty.

FEDERAL COMMUNICATIONS  COMMISSION COMPLIANCE INFORMATION

DITTO X4 LOOPER

Responsible Party Name: Music Tribe Commercial NV Inc.
Address: 5270 Procyon Street, Las Vegas NV 89118,  United States
Phone Number: +1 702 800 8290

DITTO X4 LOOPER

This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause  harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the  user is encouraged to try to correct the interference by one or more of the following measures:

• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
•  Consult the dealer or an experienced radio/TV technician for help.

This device complies with Part 15 of the FCC rules. Operation is subject to the following two conditions:
(1) this device may not cause harmful interference, and
(2) this device must accept any interference received, including interference that may cause undesired operation.
Important information:
Changes or modifications to the equipment not expressly approved by Music Tribe can void the user’s authority to use the equipment.
Operation Ambient Temperature up to 45°C

Hereby, Music Tribe declares that this product is in compliance with Directive 2014/35/EU, Directive 2014/30/EU, Directive 2011/65/EU, and Amendment 2015/863/EU,  Directive 2012/19/EU, Regulation 519/2012 REACH SVHC and Directive 1907/2006/EC.
Full text of EU DoC is available at https://community.musictribe.com/ 
EU Representative: Music Tribe Brands DK A/S
Address: Ib Spang Olsens Gade 17, DK – 8200 Aarhus N, Denmark

Rotating Speaker Emulator with Simple 2-Knob Interface and Toggle Switch for Classic Rock Tones

Controls

1. Input/Output jacks – Connect a 1/4″ cable from your guitar to the INPUT jack, and connect a cable from the OUTPUT jack to your amplifier.
2. 9 V DC – Connect a 9 V power supply (not included).
3. Footswitch – Turns the effect on and off. The LED will light when the pedal is engaged. The pedal operates in true bypass when disengaged.
4. SPEED – Adjusts the speed of the rotation.
5. DRIVE – Adjusts the amount of saturation and drive.
6. CHORALE/TREMOLO – Selects the range that the Speed knob works in – chorale being slow and tremolo being faster. This switch can be moved back and forth while playing, causing the rotation to gradually speed up or slow down when shifted.

Battery Replacement

Storage

Specification

Legal Disclaimer

MUSIC Group accepts no liability for any loss which may be suffered by any person who relies either wholly or in part upon any description, photograph, or statement contained herein. Technical specifications, appearances and other information are subject to change without notice. All trademarks are the property of their respective owners. MIDAS, KLARK TEKNIK, LAB GRUPPEN, LAKE, TANNOY, TURBOSOUND, TC ELECTRONIC, TC HELICON, BEHRINGER, BUGERA, and COOLAUDIO are trademarks or registered trademarks of MUSIC Group IP Ltd. © MUSIC Group IP Ltd. 2018 All rights reserved.

LIMITED WARRANTY

For the applicable warranty terms and conditions and additional information regarding MUSIC Group’s Limited Warranty, please see complete details online at music-group.com/warranty.

This product conforms with essential requirements of EMC Directive 2014/30/EU, RoHS Directive 2011/65/EU and WEEE Directive – 2012/19/EU.

TC ELECTRONIC
CINDERS OVERDRIVE
Tube-Like Overdrive with Extremely
Responsive and Expressive Feel

Quick Start Guide

Controls

1.  Input/Output jacks – Connect a 1/4″ cable from your guitar to the INPUT jack, and connect a cable from the
   OUTPUT jack to your amplifier.
2. 9 V DC – Connect a 9 V power supply (not included).
3. Footswitch – Turns the effect on and off. The LED will light when the pedal is engaged. The pedal operates in true bypass when disengaged.
4. Tone – Adjusts the amount of high-frequency contour for a brighter or rounder sound.
5. Volume – Adjusts the output level when the pedal is engaged.
6. Drive – Adjusts the amount of distortion.

Battery Replacement

Storage

Specification

LIMITED WARRANTY

For the applicable warranty terms and conditions and additional information regarding MUSIC Tribe’s Limited Warranty, please see complete details online at musictri.be/warranty.

This product conforms with essential requirements of the EMC Directive
2014/30/EU, RoHS Directive 2011/65/EU, and WEEE Directive – 2012/19/EU.

Quick Start Guide
TC ELECTRONIC SHAKER VIBRATO

Visit tcelectronic.com to download the full manual

Visit tcelectronic.com to download the full manual

Controls

Input/Output jacks – Connect a 1/4″ cable from your guitar to the INPUT jack, and connect a cable from the OUTPUT jack to your amplifier. 9 V DC – Connect a 9 V  power supply (not included).
Footswitch – Turns the effect on and off. The LED will light when the pedal is engaged. The pedal operates in true bypass when disengaged.
Time – Adjusts the tempo of the repeats.
Mix – Adjusts how much of the effect is mixed with the dry signal.
Repeats – Adjusts how many echos are heard before full decay.

Battery Replacement

Storage

Specification

Connectors

physical

LEGAL DISCLAIMER

MUSIC Tribe accepts no liability for any loss which may be suffered by any person who relies either wholly on or in part upon any description, photograph, or statement contained herein. Technical specifications, appearances, and other information are subject to change without notice. All trademarks are the property of their respective owners. MIDAS, KLARK TEKNIK, LAB GRUPPEN, LAKE, TANNOY, TURBOSOUND, TC ELECTRONIC, TC HELICON, BEHRINGER, BUGERA, and COOLAUDIO are trademarks or registered trademarks of MUSIC Tribe Global Brands Ltd. © MUSIC Tribe Global Brands Ltd. 2018 All rights reserved.
LIMITED WARRANTY
For the applicable warranty terms and conditions and additional information regarding MUSIC Tribe’s Limited Warranty, please see complete details online at musictri.be/warranty.

This product conforms with essential requirements of EMC Directive 2014/30/EU, RoHS Directive 2011/65/EU and WEEE Directive – 2012/19/EU.