INSTALLATION INSTRUCTIONS

Rhino Brand Rear Axles are recommended for 2011 models

Differential Spacer x 2

arrange Brackets as shown before beginning installation

(Passenger Side)                                                             (Driver Side)

(kit contents continue on following page)

Need help with your installation?

   sales@superatv.com            www.superatv.com

   1-855-743-3427                  8:00am – 8:00pm EST M-Th

8:00am – 7:00pm EST Friday
9:00am – 2:00pm EST Saturday

Read instructions and view illustrations before beginning.

Thank You For Choosing

(kit contents continued)

Z-Bend Tie Rod Kit

Liability Statement
SuperATV’s® products are designed to best fit user’s ATV/UTV under stock conditions. Adding, modifying, or fabricating any factory or aftermarket parts will void any warranty provided by SuperATV® and is not recommended. SuperATV’s® products could interfere with other aftermarket accessories. If user has aftermarket products on machine, contact SuperATV® to verify that they will work together.

Although SuperATV® has thousands of satisfied customers, user should be aware that installing lift kits, long travel, or suspension kits, tires, etc. will change the ride of machine and may increase maintenance and part wear. Operating any off-road machine while, or after, consuming alcohol and/or drugs increases risk of bodily harm or death. No warranty or representation is made as to this product’s ability to protect user from severe injury or death. SuperATV® urges operators and occupants to wear a helmet and appropriate riding gear at all times.

By purchasing and installing SuperATV® products, user agrees that should damages occur, SuperATV® will not be held responsible for loss of time, use, labor fees, replacement parts, or freight charges. SuperATV®, nor any 3rd party, will not be held responsible for any direct, indirect, incidental, special, or consequential damages that result from any product purchased from SuperATV®. The total liability of seller to user for all damages, losses, and causes of action, if any, shall not exceed the total purchase price paid for the product that gave rise to the claim.

SuperATV® will warranty only parts provided by SuperATV®. Any damage or problems with OEM housings, bearings, seals, or other manufacturers’ products will not be covered by SuperATV®. SuperATV® parts and products are not warrantied if item was not installed properly, misused, or modified.

Installing, adding, modifying, or fabricating any factory or aftermarket product to your ATV/UTV may violate certain local, state, and federal laws. Be advised that laws vary depending on town, city, county, state, etc. Use of certain products on public streets, roads, or highways may be in violation law. The Buyer is solely and exclusively legally and personally responsible for any violation of the law by the installation or use of the product. You must abide by all local, state, and federal laws, including but not limited to vehicle safety, traffic laws, and ordinances. It is your responsibility to know the laws and how they apply to you.

The Buyer is responsible to fully understand the capability and limitations of his/her vehicle according to manufacturer specifications, warnings and instructions and agrees to hold SuperATV® harmless from any damage resulting from failure to adhere to such specifications, warnings and/ or instructions. The Buyer is also responsible to obey all applicable federal, state, and local laws and ordinances when operating his/her vehicle while using this product, and the Buyer agrees to hold SuperATV® harmless from any violation thereof.

Keep all stock components removed from machine. Do not tighten hardware completely unless noted.

– Raise front of machine off ground, secure with jack stands,and remove Wheels.
– Remove Tie Rods from Spindles and unscrew from Rack and Pinion.
– Remove hardware from upper Shocks and pull Shocks from factory Shock Mount.
– Install Differential Spacers. See following page.

2

– Remove bolts holding Front Differential to Frame.
– Pry Differential up and slide Differential Spacers underneath Differential.
– Determine correct hardware and secure Differential Spacer. Bolts should thread easily into Differential. Stop and use other included bolts if resistance occurs.
– Tighten hardware completely.

4x     3/8″-16NC X 1″ Lg. FHCS Serrated

4x  M10-1.50 x 25mm Lg. FHCS

3

– Install Tie Rods. See following page.
– Install Shock Mount Brackets (G) to factory Shock Mount with hardware shown.
– Determine lift and reinstall Shock into new Shock Mounts (G) with stock hardware.
– Repeat steps for opposite side. Tighten hardware completely.

4

– Remove stock Tie Rods from machine.
– Remove Jam Nuts from Ball and Sockets.
– Install Ball and Sockets to Rack and Pinion. Use Loctite.
– Install Boots to Rack and Pinion and secure with Zip Ties.
Use a lubricant to ease installation.
– Reinstall Jam Nuts to Ball and Sockets
– Install Tie Rod Shafts to Ball and Sockets.
– Install Tie Rod Ends to Tie Rod Shafts
– Secure Tie Rod Ends to same location as stock on Spindles with hardware shown.

– Before initial ride, set toe-in of vehicle.
– After initial ride check to see that hardware remained tight.

5

– Raise rear of machine off ground, secure with jack stands,and remove Wheels.
– Remove Sway Bar Links.
– Remove hardware from upper Shocks and pull Shocks from factory Shock Mount.
– Install Rear Shock Mount Brackets (H)(J) to insides of factory Shock Mount with hardware shown.
– Determine lift and reinstall Shock into Rear Shock Mount Brackets (H)(J) with stock hardware.
– Repeat steps for opposite side.
– Install Sway Bar Links (K). See following page.
– Tighten hardware completely.

6

7

2753 Michigan Road • Madison, Indiana 47250 • 855-743-3427

INSTALLATION INSTRUCTIONS
Roof: for Can-Am Defender MAX

– SuperATV does not recommend keeping the Roof installed while transporting on an open-air trailer. Remove or secure with straps.
– This item is not returnable if the protective film has been removed.
– Test fit to the cage to confirm fitment before removing the film.

Machine has SuperATV Mirror, Rear Windshield, and Front Windshield installed; not included.

sales@superatv.com
1-855-743-3427
www.superatv.com
8:00am – 8:00pm EST M-Th
8:00am – 7:00pm EST Friday
9:00am – 2:00pm EST Saturday

Read instructions and view illustrations before beginning.

Roof Cleaning:
– Do not use Rain-X®, Plexus®, or any other protector, wax, or polish.
– Do not use window cleaning fluids (Windex, 409, etc) or any solvents (gasoline, denatured alcohol, acetone, etc).
– Never use abrasive cleaners, abrasive pads, or gritty cloths.
1. Thoroughly rinse the Roof to float off dirt and mud.
2. Using a soft cloth, or microfiber cloth, clean the Roof with warm water and a gentle detergent. Baby shampoo, rubbing alcohol, or handwashing soap can also be used.
3. To prevent water spots, use a chamois to blot the Roof dry.

When assembling, do not tighten hardware completely.

Rubber must face plastic when installing Sealing Washers

– Install Flat Seal to only one side of Brace (C). Do not install to remaining Brace (C).

– Join Front (B) and Rear (A) with Braces (C) with hardware shown.

– Remove hardware shown and install Middle Braces (F). Tighten all hardware except Middle Brace (F) hardware.

– Loosely secure Tube Clamps (H) around Cage.

– Cut and install Square Seal to Cage in location shown.
– Repeat for opposite side.

Soak Bulb Seal in hot water before cutting or installing to increase flexibility.

– Install Bulb Seal to Rear (A) in locations shown.

– Install Right and Left Braces (D)(E) to Rear (A) with hardware shown; tighten completely.

– Place assembly onto Frame and secure Front (B) with hardware shown.
– If applicable reinstall Mirror Bracket at this time.
– Do not tighten hardware completely.

– Secure Middle Braces (F) to Tube Clamps (H) with hardware shown.

– Install Clamps (D) to Roof and around Frame with hardware shown; do not tighten completely.

– Secure Rear (A) to Frame with hardware shown; do not tighten completely.

– If machine is equipped with SuperATV Rear Windshield, remove Brackets shown.

– If SuperATV Rear Windshield is not installed, install Plastic Rivets into Rear (A).

– Secure Rear (A) to SuperATV Rear Windshield with hardware shown; do not tighten completely.

– Repeat for opposite side.
– Align Roof to machine and tighten all hardware completely.

Liability Statement
SuperATV’s ® products are designed to best fit user’s ATV/UTV under stock conditions. Adding, modifying, or fabricating any factory or aftermarket parts will void any warranty provided by SuperATV ® and is not recommended. SuperATV’s ® products could interfere with other aftermarket accessories. If user has aftermarket products on machine, contact SuperATV ® to verify that they will work together.

Although SuperATV ® has thousands of satisfied customers, user should be aware that installing lift kits, long travel, or suspension kits, tires, etc. will change the ride of machine and may increase maintenance and part wear. Operating any off-road machine while, or after, consuming alcohol and/or drugs increases the risk of bodily harm or death. No warranty or representation is made as to this product’s ability to protect user from severe injury or death. SuperATV ® urges operators and occupants to wear a helmet and appropriate riding gear at all times. By purchasing and installing SuperATV ® products, user agrees that should damage occur, SuperATV ® will not be held responsible for loss of time, use, labor fees, replacement parts, or freight charges.

SuperATV ® , nor any 3rd party, will not be held responsible for any direct, indirect, incidental, special, or consequential damages that result from any product purchased from SuperATV ® . The total liability of the seller to the user for all damages, losses, and causes of action, if any, shall not exceed the total purchase price paid for the product that gave rise to the claim. SuperATV ® will warranty only parts provided by SuperATV ® . Any damage or problems with OEM housings, bearings, seals, or other manufacturers’ products will not be covered by SuperATV ® . SuperATV ® parts and products are not warrantied if item was not installed properly, misused, or modified.

Installing, adding, modifying, or fabricating any factory or aftermarket product to your ATV/UTV may violate certain local, state, and federal laws. Be advised that laws vary depending on town, city, county, state, etc. Use of certain products on public streets, roads, or highways may be in violation law. The Buyer is solely and exclusively legally and personally responsible for any violation of the law by the installation or use of the product. You must abide by all local, state, and federal laws, including but not limited to vehicle safety, traffic laws, and ordinances. It is your responsibility to know the laws and how they apply to you. The Buyer is responsible to fully understand the capability and limitations of his/her vehicle according to manufacturer specifications, warnings and instructions and agrees to hold SuperATV ® harmless from any damage resulting from failure to adhere to such specifications, warnings and/or instructions.

The Buyer is also responsible to obey all applicable federal, state, and local laws and ordinances when operating his/her vehicle while using this product, and the Buyer agrees to hold SuperATV violation thereof. ® harmless from any violation thereof.

2753 Michigan Road · Madison, Indiana 47250 · 855-743-3427
INSTALLATION INSTRUCTIONS
Door Inserts: for Honda Talon

Liability Statement

SuperATV’s® products are designed to best fit users ‘ ATV/UTV under stock conditions. Adding, modifying, or fabricating any factory or aftermarket parts will void any warranty provided by SuperATV® and is not recommended. SuperATV’s® products could interfere with other aftermarket accessories. If the user has aftermarket products on the machine, contact SuperATV® to verify that they will work together.
Although SuperATV® has thousands of satisfied customers, users should be aware that installing lift kits, long travel, or suspension kits, tires, etc. will change the ride of the machine and may increase maintenance and part wear. Operating any off-road machine while, or after, consuming alcohol and/or drugs increases the risk of bodily harm or death. No warranty or representation is made as to this product’s ability to protect users from severe injury or death. SuperATV® urges operators and occupants to wear a helmet and appropriate riding gear at all times.
By purchasing and installing SuperATV® products, the user agrees that should damage occur, SuperATV® will not be held responsible for loss of time, use, labor fees, replacement parts, or freight charges. SuperATV®, nor any 3rd party, will not be held responsible for any direct, indirect, incidental, special, or consequential damages that result from any product purchased from SuperATV®. The total liability of the seller to the user for all damages, losses, and causes of action, if any, shall not exceed the total purchase price paid for the product that gave rise to the claim.
SuperATV® will warranty only parts provided by SuperATV®. Any damage or problems with OEM housings, bearings, seals, or other manufacturers’ products will not be covered by SuperATV®. SuperATV® parts and products are not warrantied if item was not installed properly, misused, or modified.
Installing, adding, modifying, or fabricating any factory or aftermarket product to your ATV/UTV may violate certain local, state, and federal laws. Be advised that laws vary depending on town, city, county, state, etc. Use of certain products on public streets, roads, or highways may be in violation of the law. The Buyer is solely and exclusively legally and personally responsible for any violation of the law by the installation or use of the product. You must abide by all local, state, and federal laws, including but not limited to vehicle safety, traffic laws, and ordinances. It is your responsibility to know the laws and how they apply to you.
The Buyer is responsible to fully understand the capability and limitations of his/her vehicle according to manufacturer specifications, warnings and instructions and agrees to hold SuperATV® harmless from any damage resulting from failure to adhere to such specifications, warnings, and/ or instructions. The Buyer is also responsible to obey all applicable federal, state, and local laws and ordinances when operating his/her vehicle while using this product, and the Buyer agrees to hold SuperATV® harmless from any violation thereof.

♦Remove (8) screws from locations shown.

♦Locate stock indentations in areas shown and drill out to Ø9/32”.

repeat steps for opposite Door

♦Temporarily install the Right Bracket with the hardware shown.

♦Locate (3) holes in the Right Bracket and mark locations onto stock plastic.
♦Remove Right Bracket.
♦ Drill holes to Ø9/32”.
♦ Reinstall Right Bracket.

♦ Secure Right Bracket to stock plastic with hardware shown; tighten hardware completely.

♦ Install Right Door to Right Bracket with hardware shown; tighten hardware completely.

“Seal Installation”
To ease installation, soak Seal in hot water before cutting or installing to increase flexibility.

Reinstall stock Insert, tighten hardware completely, and repeat steps for the opposite side.

Read instructions and view illustrations before beginning.

Need help with your installation?

sales@superatv.com	www.superatv.com
1-855-743-3427	8:00am – 8:00pm EST M-Th 8:00am – 7:00pm EST Friday 9:00am – 2:00pm EST Saturday

© 2021 SuperATV.com. All Rights Reserved.

INSTALLATION INSTRUCTIONS
Flip Down Windshield: for Polaris RZR® Trail/S

– SuperATV does not recommend keeping a Windshield installed while transporting on an open-air trailer. Remove or secure with straps.
– This item is not returnable if the protective film has been removed.
– Test fit to the cage to confirm fitment before removing the film.

(kit contents continue on following page)

Need help with your installation?

sales@superatv.com

www.superatv.com

1-855-743-3427

8:00am – 8:00pm EST M-Th
8:00am – 7:00pm EST Friday
9:00am – 2:00pm EST Saturday

Read instructions and view illustrations before beginning.

IN-FDWS-P-RZR900S 3/3/2021

(kit contents continued)

When assembling, do not tighten hardware completely unless noted.

Windshield Cleaning:

– Do not use Rain-X ® , Plexus ® or any other protector, wax, or polish.
– Do not use window cleaning fluids (Windex, 409, etc) or any solvents (gasoline, denatured alcohol, acetone, etc).
– Never use abrasive cleaners, abrasive pads, or gritty cloths.
– Do not use a windshield wiper blade or install a motorized windshield wiper
– Never use razor blades, scrapers, squeegees, brushes, etc.
1. Thoroughly rinse the Windshield to float off dirt and mud.
2. Using a soft cloth, or microfiber cloth, clean the Windshield with warm water and a gentle detergent. Baby shampoo, rubbing alcohol, or handwashing soap can also be used.
3. To prevent water spots, use a chamois to blot the Windshield dry.

Liability Statement SuperATV’s ® products are designed to best fit user’s ATV/UTV under stock conditions. Adding, modifying, or fabricating any factory or aftermarket parts will void any warranty provided by SuperATV ® and is not recommended. SuperATV’s ® products could interfere with other aftermarket accessories. If the user has aftermarket products on the machine, contact SuperATV ® to verify that they will work together.

Although SuperATV ® has thousands of satisfied customers, users should be aware that installing lift kits, long travel, or suspension kits, tires, etc. will change the ride of the machine and may increase maintenance and part wear. Operating any off-road machine while, or after, consuming alcohol and/or drugs increases the risk of bodily harm or death. No warranty or representation is made as to this product’s ability to protect users from severe injury or death. SuperATV ® urges operators and occupants to wear a helmet and appropriate riding gear at all times. By purchasing and installing SuperATV ® products, the user agrees that should damage occur, SuperATV ® will not be held responsible for loss of time, use, labor fees, replacement parts, or freight charges. SuperATV®, nor any 3rd party, will not be held responsible for any direct, indirect, incidental, special, or consequential damages that result from any product purchased from SuperATV®. The total liability of the seller to the user for all damages, losses, and causes of action, if any, shall not exceed the total purchase price paid for the product that gave rise to the claim.

SuperATV ® will warranty only parts provided by SuperATV ®. Any damage or problems with OEM housings, bearings, seals, or other manufacturers’ products will not be covered by SuperATV ®. SuperATV ® parts and products are not warrantied if the item was not installed properly, misused, or modified. Installing, adding, modifying, or fabricating any factory or aftermarket product to your ATV/UTV may violate certain local, state, and federal laws. Be advised that laws vary depending on the town, city, county, state, etc. Use of certain products on public streets, roads, or highways may be in violation of the law. The Buyer is solely and exclusively legally and personally responsible for any violation of the law by the installation or use of the product. You must abide by all local, state, and federal laws, including but not limited to vehicle safety, traffic laws, and ordinances. It is your responsibility to know the laws and how they apply to you.

The Buyer is responsible to fully understand the capability and limitations of his/her vehicle according to manufacturer specifications, warnings and instructions and agrees to hold SuperATV ® harmless from any damage resulting from failure to adhere to such specifications, warnings, and/ or instructions. The Buyer is also responsible to obey all applicable federal, state, and local laws and ordinances when operating his/her vehicle while using this product, and the Buyer agrees to hold SuperATV violation thereof. ® harmless from any

“

To ease installation, soak Seal in hot water before cutting or installing to increase flexibility.
install U-Seal to top of Windshield

install Bulb Seal to lower and sides of Windshield

– Remove upper Straps from Windshield.
– Place Windshield in open position.

– Repeat for opposite side.

IN-FDWS-P-RZR900S