SUMMIT Beverage Cooler User Manual

APPLIANCE SAFETY

Your safety and the safety of others are very important. We have provided many important safety messages in this manual and on your appliance. Always read and obey all safety messages.

This is the Safety Alert Symbol. The symbol alerts you to potential hazards that can kill or injure you and others. All safety messages will follow the Safety Alert Symbol and either the words “DANGER” or “WARNING”.

DANGER: means that failure to heed this safety statement may result in severe personal injury or death.

WARNING: means that failure to heed this safety statement may result in extensive product damage, serious personal injury, or death.
All safety messages will alert you about the potential hazard, tell you how to reduce the chance of injury, and let you know what can happen if the instructions are not followed.

IMPORTANT SAFEGUARDS

Before the appliance is used, it must be properly positioned and installed as described in this manual, so read the manual carefully. To reduce the risk of fire, electrical shock or injury when using the appliance, follow basic precautions, including the following:

DANGER: 

• Plug into a grounded 3-prong outlet, do not remove grounding prong, do not use an adapter, and do not use an extension cord.
• Replace all panels before operating.
• It is recommended that a separate circuit serving only your appliance be provided. Use receptacles that cannot be turned off by a switch or pull chain.
• Never clean appliance parts with flammable fluids. These fumes can create a fire hazard or explosion. And do not store or use gasoline or other flammable vapors and liquids in the vicinity of this or any other appliance. The fumes can create a fire hazard or explosion.
• Before proceeding with cleaning and maintenance operations, make sure the power line of the unit is disconnected.
• Do not connect or disconnect the electric plug when your hands are wet.
• Unplug the appliance or disconnect power before cleaning or servicing. Failure to do so can result in electrical shock or death.
• Do not attempt to repair or replace any part of your appliance unless it is specifically recommended in this manual. All other servicing should be referred to a qualified technician.
• This appliance is CFC- and HFC-free and contains small quantities of Isobutane (R600a) which is environmentally friendly, but flammable. It does not damage the ozone layer, nor does it increase the greenhouse effect. Care must be taken during transportation and setting up of the appliance that no parts of the cooling system are damaged. Leaking coolant can ignite and may damage the eyes. In the event of any damage:
  • Avoid open flames and anything that creates a spark,
  • Disconnect from the electrical power line,
  • Air the room in which the appliance is located for several minutes, and
  • Contact the Service Department for advice.
• The more coolant there is in an appliance, the larger the room it should be installed in. In the event of a leakage, if the appliance is in a small room, there is the danger of combustible gases building up. For every ounce of coolant at least 325 cubic feet of room space is required. The amount of coolant in the appliance is stated on the data plate on the back of the appliance. It is hazardous for anyone other than an Authorized Service Person to carry out servicing or repairs to this appliance.
• Take serious care when handling, moving, and using the appliance to avoid either damaging the refrigerant tubing or increasing the risk of a leak.
• Replacing component parts and servicing shall be done by factory authorized service personnel so as to minimize the risk of possible ignition due to incorrect parts or improper service.

WARNING:
FOLLOW WARNING CALLOUTS BELOW ONLY WHEN APPLICABLE TO YOUR MODEL

• Use two or more people to move and install appliance. Failure to do so can result in back or other injury.
• To ensure proper ventilation for your appliance, the front of the unit must be completely unobstructed. Choose a well-ventilated area with temperatures above 60°F (16°C) and below 90°F (32°C). (Optimum operation occurs within the range 72º to 78ºF, or 23º- 26ºC.) This unit must be installed in an area protected from the elements, such as wind, rain, water spray or drips.
• The appliance should not be located next to ovens, grills or other sources of high heat.
• The appliance must be installed with all electrical, water and drain connections in accordance with state and local codes. A standard electrical supply (115 V AC only, 60 Hz), properly grounded in accordance with the National Electrical Code and local codes and ordinances, is required.
• Do not kink or pinch the power supply cord of the appliance.
• The size of the fuse (or circuit breaker) should be 15 amperes.
• It is important that the appliance be leveled in order to work properly. You may need to make several adjustments to level it.
• All installations must be in accordance with local plumbing code requirements.
• Make certain that the pipes are not pinched, kinked or damaged during installation.
• Check for leaks after connection.
• Never allow children to operate, play with or crawl inside the appliance.
• Do not use solvent-based cleaning agents or abrasives on the interior. These cleaners may damage or discolor the interior.
• Use this appliance only for its intended purpose as described in this User Manual.
• Keep fingers out of the “pinch point” areas. Clearances between the door and cabinet are necessarily small. Be careful closing doors when children are in the area.
• Do not store explosive substances such as aerosol cans with a flammable propellant in this appliance.
• Keep ventilation openings, in the appliance enclosure or in the built-in structure, clear of obstruction.
• Do not use mechanical devices or other means to accelerate the defrosting process, other than those recommended by the manufacturer.
• Do not damage the refrigerant circuit.
• Do not use electrical appliances inside the food storage compartments of the appliance, unless they are of the type recommended by the manufacturer

DANGER:
Risk of child entrapment!

Child entrapment and suffocation are not problems of the past. Junked or abandoned appliances are still dangerous, even if they will “just sit in the garage a few days”.
Before discarding your old refrigerator:
✓ Take off the doors
✓ Leave the shelves in place so that children may not easily climb inside

LOCATION OF PARTS

• Glass Door
  
• Solid Door
  

INSTALLATION INSTRUCTIONS

BEFORE USING YOUR APPLIANCE

• Remove the exterior and interior packing.
• Before connecting the appliance to the power source, let it stand upright for approximately 2 hours. This will reduce the possibility of a malfunction in the cooling system from handling during transportation.
• Clean the interior surface with lukewarm water using a soft cloth.
• Install the handle on the door

INSTALLATION OF YOUR APPLIANCE

• The appliance is designed for free-standing or built-in installation
• CAUTION: This appliance is designed for storing and cooling beverages and drinks. Do not store perishable food, medicine or other medical products.
• Place your Beverage Cooler on a floor that is strong enough to support it when it is fully loaded. To level the unit, adjust the front leveling legs.
• For free-standing installation, leave 5 inches (127mm) of space around the back and sides of the unit to allow proper air circulation to cool the compressor and condenser. Even for built-in installation, it is a must to keep ¼” (6.35mm) space on each side and at the top and 2” (51mm) at the rear. Take care that the air vent at the front of the appliance is never covered or blocked in anyway.
• NOTE: It is recommended that you do not install the appliance near an oven, radiator or other heating source. Direct sunlight may affect the acrylic coating and heat sources may increase electrical consumption. Don’t install in a location where the temperature will fall below 60°F (16°C). For best performance, do not install the appliance behind a cabinet door or block the base grille.
• Avoid locating the unit in moist areas.
• Plug the Beverage Cooler into an exclusive, properly grounded wall outlet. Do not under any circumstances cut or remove the third (ground) prong from the power cord. Any questions concerning power and/or grounding should be directed toward a certified electrician or an authorized service center.
• NOTE: Model numbers with “OS” in their suffix feature reinforced construction and can be used in the outdoors. Extreme temperature conditions may affect performance

ELECTRICAL CONNECTION

WARNING:
Improper use of the grounded plug can result in the risk of electrical shock. If the power cord is damaged, have it replaced by a qualified electrician or an authorized service center. This appliance should be properly grounded for your safety. The power cord of this appliance is equipped with a three-prong plug that mates with standard three-prong wall outlets to minimize the possibility of electrical shock.
Do not under any circumstances cut or remove the third (ground) prong from the power cord supplied. For personal safety, this appliance must be properly grounded. This appliance requires a standard 115/120 Volt AC ~ 60Hz three-prong grounded electrical outlet. Have the wall outlet and circuit checked by a qualified electrician to make sure the outlet is properly grounded. When a standard 2-prong wall outlet is encountered, it is your responsibility and obligation to have it replaced with a properly grounded 3-prong wall outlet. To prevent accidental injury, the cord should be secured behind the appliance and not left exposed or dangling. The appliance should always be plugged into its own individual electrical outlet which has a voltage rating that matches the rating label on the appliance. This provides the best performance and also prevents overloading house wiring circuits that could cause a fire hazard from overheating. Never unplug the appliance by pulling on the power cord. Always grip the plug firmly and pull straight out from the receptacle. Repair or replace immediately all power cords that have become frayed or otherwise damaged. Do not use a cord that shows cracks or abrasion damage along its length or at either end. When moving the appliance, be careful not to damage the power cord.

EXTENSION CORD

Because of potential safety hazards under certain conditions, it is strongly recommended that you do not use an extension cord with this appliance. However, if you must use an extension cord, it is absolutely necessary that it be a UL/CUL-Listed, 3-wire grounding type appliance extension cord having a grounding type plug and outlet and that the electrical rating of the cord be 115 volts and at least 10 amperes.

INSTALLING THE DOOR HANDLE

This beverage cooler includes a stainless steel handle that is not required to operate the unit. To install the handle, follow the instructions below:

1. Remove the door gasket on the side you wish to install the handle – you can see two designated holes for handle installation. The gasket is easily displaced by hand; no tools are necessary.
2. Install the handle tightly as shown with two screws and flat washers provided. (DO NOT over-tighten as this will cause damage to the handle and stainless steel door frame).
3. Replace the door gasket to its original position.

REVERSING THE DOOR SWING (if desired)

1. Remove the screws and hinge at the same time.
2. Hold tight and pull, the door upwards and off carefully
3. Remove the screws and lower door hinge
4. Take out the caps on the holes
5. Take out the hinge cover and handle hole caps
6. Remove screws
7. Take off the handle.
8. Assemble the hinge cover and handle hole caps.
9. Assemble the lower door hinge to the other side, and assemble the screws
10. Hold tight and set glass door downwards on the lower door hinge
11. Assemble the upper door hinge and screws to the other side.
12. Finished

OPERATING YOUR APPLIANCE

It is recommended you install the appliance in a place where the ambient temperature is between 72º and 78ºF (23º-26ºC). If the ambient temperature is above or below the recommended temperatures, the performance of the unit may be affected. For example, placing your unit in extremely cold or hot conditions may cause interior temperatures to fluctuate. The range of 34-50ºF (1-10ºC) may not be reached.

CONTROL PANEL

Mechanical Control

1. There is a TEMP-ADJ knob inside the beverage cooler. The temperature in the cabinet can be adjusted within the range 34-50°F (1-10°C).
2. To lower the temperature in the cabinet, turn the TEMP-ADJ knob from left to right (clockwise) by the indicating black dot on the knob. A setting close to 7 is the coldest, and a setting close to 1 is the warmest.
3. When using the appliance for the first time, turn the knob to Coldest or 7 to cool down the cabinet quickly.
4. The LED light inside is automatically controlled. When you open the door, the light will turn on immediately and when you close the door, the light will turn off automatically.

• NOTE:
  If the unit is unplugged, or power is lost or turned off, you must wait 3 to 5 minutes before restarting the unit. If you attempt to restart before this time delay, the unit will not start.
• When you use the unit for the first time or restart the unit after it has been shut off for a long time, there could be a few degrees variance between the temperature you select and the one indicated on the LED readout. This is normal and is due to the length of the activation time. There should not be a problem once the unit has been running for a few hours.

DOOR LOCK

Your unit is provided with a lock and key combination. The keys are located inside the plastic bag that contains the User Manual. Insert the key into the lock and turn it counterclockwise to unlock the door. To lock the door, do the reverse operation, making sure the metal pin is engaged completely. Remove the key and put it in a secure place for safekeeping

DEFROSTING

This appliance requires no manual defrosting. During the operation of the compressor, ice will build up on the evaporator plate which is at the back of inner cabinet. During the compressor’s off-cycle, the ice will melt, drip down, and collect in a tray above the compressor, where the compressor’s heat evaporates the water. If you notice excessive ice build-up on the evaporator, try setting the temperature slightly higher. Also, be sure that the door gasket is sealing well.

SHELVES

The unit has three removable glass shelves. To take out a shelf, first remove its contents, then raise the back of the shelf slightly and pull the shelf out.

CARE AND MAINTENANCE

CLEANING YOUR APPLIANCE

• Turn off the power, unplug the appliance, and remove all items, including shelves.
• Wash the inside surfaces with a solution of warm water and baking soda (about 2 tablespoons of baking soda to a quart of water).
• Wash the shelves with a mild detergent solution.
• Wring excess water out of the sponge or cloth when cleaning the area where the controls are located, or any electrical parts.
• Wash the outside cabinet with warm water and mild liquid detergent. Rinse well and wipe dry with a clean soft cloth.
• Do not use steel wool or a steel brush on the stainless steel.

POWER FAILURE

Most power failures are corrected within a few hours and should not affect the temperature of your appliance if you minimize the number of times the door is opened. If the power is going to be off for a longer period of time, you need to take the proper steps to protect the contents.

VACATIONS

• Short vacations: Leave the appliance operating during vacations of less than three weeks.
• Long vacations: If the appliance will not be used for several months, remove all items and turn off the appliance. Clean and dry the interior thoroughly. To prevent odor and mold growth, leave the door open slightly, blocking it open if necessary.

MOVING YOUR APPLIANCE

1. Remove all stored items.
2. Securely tape down all loose items (shelves) inside your appliance.
3. Turn the adjustable legs up to the base to avoid damage.
4. Tape the door shut.
5. Be sure the appliance stays secure in the upright position during transportation. Also, protect the outside of the appliance with a blanket or similar item.

ENERGY-SAVING TIPS

• The appliance should be located in the coolest area of the room, away from heat producing appliances and out of direct sunlight.
• Ensure that the unit is adequately ventilated.
• Do not keep the door open any longer than necessary.

CAUTION: Failure to unplug the appliance during cleaning could result in electrical shock or other personal injury

CALIFORNIA CARB/SNAP DISCLOSURE for products manufactured after January 1, 2019:

Retail food refrigeration equipment manufactured after January 1, 2019, designed to store and display chilled goods for commercial sale, and that use HFC-134a/R134a refrigerant are not for sale in California.
*This product uses eco-friendly hydrocarbon refrigerant and fully complies with California CARB regulations. However, we are required by California Law to provide the previous disclosure statement in every product sold in California. This product does not use any refrigerants on the “List of Prohibited Substances.”

TROUBLESHOOTING

You can solve many common problems easily, saving you the cost of a possible service call. Try the suggestions below to see if you can solve the problem before calling the service technician

Troubleshooting Solutions

LIMITED WARRANTY

ONE-YEAR LIMITED WARRANTY

Within the 48 contiguous United States, for one year from the date of purchase, when this appliance is operated and maintained according to instructions attached to or furnished with the product, warrantor will pay for factory specified parts and repair labor to correct defects in materials or  orkmanship. Service must be provided by a designated service company. Outside the 48 states, all parts are warranted for one year from manufacturing defects. Plastic parts, shelves and cabinets are warranted to be manufactured to commercially acceptable standards, and are not covered from damage during handling or breakage.

5-YEAR COMPRESSOR WARRANTY

1. The compressor is covered for 5 years.
2. Replacement does not include labor.

ITEMS WARRANTOR WILL NOT PAY FOR:

1. Service calls to correct the installation of your appliance, to instruct you how to use your appliance, to replace or repair fuses or to correct wiring or plumbing.
2. Service calls to repair or replace appliance light bulbs or broken shelves. Consumable parts (such as filters) are excluded from warranty coverage.
3. Damage resulting from accident, alteration, misuse, abuse, fire, flood, acts of God, improper installation, installation not in accordance with electrical or plumbing codes, or use of products not approved by warrantor.
4. Replacement parts or repair labor costs for units operated outside the United States.
5. Repairs to parts or systems resulting from unauthorized modifications made to the appliance.
6. The removal and reinstallation of your appliance if it is installed in an inaccessible location or is not installed in accordance with published installation instructions.

DISCLAIMER OF IMPLIED WARRANTIES; LIMITATION OF REMEDIES

CUSTOMER’S SOLE AND EXCLUSIVE REMEDY UNDER THIS LIMITED WARRANTY SHALL BE PRODUCT REPAIR AS PROVIDED HEREIN. IMPLIED WARRANTIES, INCLUDING WARRANTIES OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE, ARE LIMITED TO ONE YEAR. WARRANTOR SHALL NOT BE LIABLE FOR INCIDENTAL OR CONSEQUENTIAL DAMAGES. SOME STATES DO NOT ALLOW THE EXCLUSION OR LIMITATION OF INCIDENTAL OR CONSEQUENTIAL DAMAGES, OR LIMITATIONS ON THE DURATION OF IMPLIED WARRANTIES OF MERCHANTABILITY OR FITNESS, SO THESE EXCLUSIONS OR LIMITATIONS MAY NOT APPLY TO YOU. THIS WARRANTY GIVES YOU SPECIFIC LEGAL RIGHTS AND YOU MAY ALSO HAVE OTHER RIGHTS, WHICH VARY FROM STATE TO STATE.

WARNING: This product can expose you to chemicals including Nickel (Metallic) which is known to the State of California to cause cancer.
For more information go to www.P65Warnings.ca.gov
Note: Nickel is a component in all stainless steel and some other metallic compositions

FELIX STORCH, INC. 770 Garrison Avenue Bronx, NY 10474
Phone: (718) 893-3900
Fax: (844) 478-8799
www.summitappliance.com

For parts and accessory ordering,
troubleshooting and helpful hints, visit:
www.summitappliance.com/support

BeautiFridge™ Cosmetics RefrigeratorUser Manual
To ensure safe operation, please read this instruction manual
thoroughly before use.

FELIX STORCH, INC.
Summit Appliance Division
ISO 9001:2015 registered
770 Garrison Avenue
Bronx, New York 10474
www.summitappliance.com

IMPORTANT SAFEGUARDS

Your safety and the safety of others are very important.

WARNING Follow these basic precautions to reduce the risk of fire, electrical shock, or injury when using your appliance.

• Read all instructions before using BeautiFridge™.
• Plug into a grounded 3-prong outlet. Do not remove the grounding prong, do not use an adapter, and do not use an extension cord.
• It is recommended that a separate circuit, serving only your BeautiFridge™, be provided. Use receptacles that cannot be turned off by a switch or pull chain.
•  Never clean BeautiFridge™ parts with flammable fluids. Fumes can create a fire hazard or explosion.
• Do not store or use gasoline or any flammable vapors and liquids in the vicinity of this or any other appliance. The fumes can create a fire hazard or explosion.
• Do not connect or disconnect the electric plug when your hands are wet.
• Unplug the BeautiFridge™ or disconnect the power before cleaning or servicing. Failure to do so can result in electrical shock or death.
• Do not attempt to repair or replace any part of your appliance unless it is specifically recommended in this manual. All other servicing should be performed by a qualified technician.
• Use two or more people to move and install the BeautiFridge™. Failure to do so can result from in back or another injury.
• To ensure proper ventilation for your appliance, the front of the unit must be completely unobstructed. Choose  a well-ventilated area with temperatures above 61 °F (16°C) and below95 ° F  (35 ° C. [The unit performs best when the  ambient temperature is in the range 66 – 75°F (19º – 24ºC).] This unit must be installed in an area protected from the elements, such as wind, rain, water spray or drips.
•  The BeautiFridge™ should not be located next to ovens, grills or other sources of high heat.
•  For optimum energy conservation, locate the BeautiFridge™ in the coolest area of the room, away from heat-producing appliances and out of direct sunlight.
• The BeautiFridge™ must be installed with all electrical connections in accordance with state and local codes. A standard electrical supply (115V AC only, 60 Hz), properly grounded in accordance with the National Electrical Code and local codes and ordinances, is required.
• Do not kink or pinch the power supply cord.
• If the power supply cord is damaged, it must be replaced by a special cord or assembly available from the manufacturer or the service agent.
• The fuse (or circuit breaker) size should be 15 amps.
• It is important for the BeautiFridge™ to be leveled in order to work properly. You may need to make several adjustments to level it.
•  Although the unit has been tested at the factory, due to transit and storage, you should clean the appliance before use.
• Do not use solvent-based cleaning agents or abrasives on the interior. These cleaners may damage or discolor the interior.
• Do not use this apparatus for other than residential purposes.
• This appliance is CFC- and HFC-free and contains small quantities of Isobutane (R600a) which is environmentally friendly, but flammable. It does not damage the ozone layer, nor does it increase the greenhouse effect. Care must be taken during transportation and setting up of the appliance that no parts of the cooling system are damaged. Leaking coolant can ignite and may damage the eyes.
• In the event of any damage:
  o, Avoid open flames and sparks.
  o, Disconnect from the electrical power line.
  o, Air the room in which the appliance is located for several minutes.
  o, Contact the Service Department for advice.
• The more coolant there is in an appliance, the larger the room it should be installed in. In the event of a leakage, if the appliance is in a small room, there is the danger of combustible gases building up. For every ounce of coolant, at least 325 cubic feet of room space is required. The amount of coolant in the appliance is stated on the data plate on the back of the appliance. It is hazardous for anyone other than an authorized service person to carry out servicing or repairs.
• Take serious care when handling, moving, and using the appliance to avoid either damaging the refrigerant tubing or increasing the risk of a leak.
• Replacing component parts and servicing should be done by factory-authorized service personnel to minimize the risk of possible ignition due to incorrect parts or improper service.
• This appliance is designed to be used in households and similar non-retail applications. Do not use this appliance for any but its intended purpose.
• This appliance is not suitable for the storage of blood, pharmaceutical products, and biological products.

Risk of child entrapment!
Child entrapment and suffocation are not problems of the past. Junked or abandoned appliances are still dangerous.
Before discarding your old BeautiFridge™:

• Take off the door
•  Leave the shelves in place so that children may not easily climb inside
• Contact your local authority for disposal procedures.

SAVE THESE INSTRUCTIONS 

DISPOSAL OF PACKAGING

•  Do not allow children to play with the packaging and dispose of plastic bags safely.
• The cardboard may be broken up or cut into smaller pieces and recycled. Any wrapping cover is made of polyethylene. The polyethylene pads and padding contain no fluoro chloric hydrocarbons, and as such are most suitable for adequate recycling.

INSTALLATION INSTRUCTIONS

Before Using Your BeautiFridge™

•  Remove the exterior and interior packing.
•  Clean the interior surface with lukewarm water, using a soft cloth.

CAUTION: Keep the unit upright when carrying or moving the cooler. Do not tip the unit more than 40º, otherwise, the compressor will be affected and disrupt normal operation.

• Place the refrigerator on a level and sturdy floor near a power outlet.

Installation of your Equipment

• The BeautiFridge™ is designed for free-standing installation and indoor use only.
• Be sure to leave at least 4” of clearance at the back and sides of the cooler for ventilation, and leave a space with an open angle of 160ᵒfor the door.

NOTE: Keep the cooler away from heat sources and avoid direct sunlight. Never place the cooler in a location where water can reach it or with unusually high humidity.

Reversing the Door Swing

The door of this unit has the capability of opening from either the left or right side. The door opens from the left side by default. Should you desire to reverse the opening direction, please follow these illustrations and  instructions:

NOTE: You will need to tilt the fridge backward to access the lower hinge which holds the screws. Do not tilt more than 40 degrees and do not lay the fridge flat on its side.

1.  Remove the top plastic hinge cover and set aside.
2.  Unscrew the three screws from the metal bracket, and set them aside. Carefully remove the door, and place it on a cushioned surface.
3.  Remove the plastic insert on the opposite side of the refrigerator door.
4. Attach the top door bracket to this side of the refrigerator, using the screws previously removed. Replace the top plastic hinge cover.
5. Remove the adjustable foot at the bottom of the refrigerator, and set it aside.
   
6.  Unscrew the two screws holding the bottom door hinge, and carefully move it across to the opposite side.
7. Fit the door to the top and bottom hinge before fixing it into position. Care must be taken, as the door will be loose.
8. Screw the adjustable foot to the opposite side of the fridge.

Set the unit back down onto a flat, even surface. Check that the door opens and shuts properly and fully closes after completing the door reversal.

NOTE: The unit must now sit upright for at least three hours before turning the unit on.

Electrical connection

A three-hole, well-grounded socket with a fuse is required to operate this unit. Never ground the cooler through a gas pipe, tap water pipe, or the grounded wire of a single-phase power supply. The power supply should be 110 to120 VAC / 60Hz and requires a voltage stabilizer of over 500VA if the power supply is out of this range. Never share the same circuit with other appliances.
NOTE: If the unit is unplugged or the power supply is interrupted, wait at least five minutes before reconnecting to a power supply.

Before Storing Cosmetics

Connect the unit to a power supply. The LED will light by turning on the switch fixed on the panel inside the cabinet. In 30 minutes, the temperature inside the cabinet should have cooled down, indicating normal operation.

OPERATING YOUR REFRIGERATOR

This equipment is intended for the storage and display of non-potentially-hazardous bottled or canned products only. The temperature is specifically set for the proper storage of cosmetics, including creams, serums,  and oils. Always read the labeling on your beauty products for specific details on proper storage. Here are some general guidelines for storing these items:

NOTE: Do not put too many items into the cooler at one time. Leave some space around the goods to allow cold air to circulate inside the cabinet. Keep bottled articles away from the walls of the interior to avoid freezing.

Temperature Adjustment

The BeautiFridge™ includes a digital thermostat with a temperature range of 42 to 65ºF. To adjust the temperature between those points, follow the instructions below:

To see the SETPOINT
The default display for your digital thermostat is the internal cabinet temperature. To view the unit’s set point,  push and immediately release the SET key. The display will flash, showing the setpoint value. If no other actions are taken in 6 seconds, the display will revert to the internal air temperature.
To change the SETPOINT
While the setpoint value is blinking, press the UP or DOWN arrow to change the setpoint to your desired temperature. Press the SET button again to exit the adjustment. The display will revert to the internal air temperature.

Defrosting

• This appliance defrosts automatically during its operating cycle. The water resulting from the defrosting is collected in a drip tray near the compressor at the back where it is automatically evaporated.
• Do not use mechanical devices or other means to accelerate the defrosting process, other than those recommended by the manufacturer.

CARE AND MAINTENANCE

CAUTION: Disconnect the power supply before performing any cleaning or maintenance.

•  Regularly wipe off any dirt, which gathers on the condenser, to maintain good ventilation.
• Sometimes the sound of water flowing will be heard from inside the unit. This is the sound of refrigerant flowing inside the pipe.
• In a very humid room, there may be condensation on the door, which can be it can be dried with a cloth.

Cleaning your BeautiFridge™

1.  Turn off the power, unplug the appliance, and remove all items, including the shelf.
2. Wash the inside surfaces with warm water and baking soda solution. The solution should be about 2  tablespoons of baking soda to a quart of water. Rinse well and wipe dry with a clean soft cloth.
3.  Wash the shelf with a mild detergent solution.
4.  Wring excess water out of the sponge or cloth when cleaning the area near the controls, or any electrical parts.
5. Wash the outside of the cabinet with warm water and a mild liquid detergent. Rinse well and wipe dry with a clean soft cloth.

Cleaning Your Tinted Door (select units)

Models with suffix “T1” include a special Low-E mirror film on the door. Use a soft, clean rubber squeegee or cotton cloth and common household-strength liquid glass cleaners such as Windex®, GlassPlus®, or silicone cleaner/polishing compounds specifically made for window films. Never use razor blades, scrapers, or abrasive cleaning compounds on window film products.

•  Keep the door gasket clean. The door gasket can be removed for cleaning and can be easily remounted.  Putting a little talcum powder on the magnetic surface of the door gasket will prolong its service life.
• Do not touch the temperature sensor inside the cabinet. This could influence the operating performance of the thermostat and the system and could cause increased energy consumption.
•  Do not to put heavy items on top of the cooler.
•  The top of your cooler may get warm. Do not store heat sensitive-items on top of the cooler.
• In the case of performance issues, please ask a qualified professional person for service. Do not dismantle the cooler without prior authorization.

TROUBLESHOOTING

You can solve many common BeautiFridge™ problems easily, saving you the cost of a possible service call. Try the suggestions below to see if you can solve the problem before calling a service technician.

NOTE: All repairs must be carried out by qualified authorized personnel. Inadequate repairs may be dangerous. Never try to repair the cooler yourself.

NOTES

LIMITED WARRANTY

ONE-YEAR LIMITED WARRANTY
Within the 48 contiguous United States, for one year from the date of purchase, when this appliance is operated and maintained according to instructions attached to or furnished with the product, the warrantor will pay for factory specified parts and repair labor to correct defects in materials or workmanship. Service must be provided by a designated service company. Outside the 48 states, all parts are warranted for one year from manufacturing defects. Plastic parts, shelves, and cabinets are warranted to be manufactured to commercially acceptable standards and are not covered from damage during handling or breakage.

5-YEAR COMPRESSOR WARRANTY

1.  The compressor is covered for 5 years.
2. The replacement does not include labor.

ITEMS WARRANTOR WILL NOT PAY FOR:

1.  Service calls to correct the installation of your appliance, to instruct you how to use your appliance, to
   replace or repair fuses or to correct wiring or plumbing.
2. Service calls to repair or replace appliance light bulbs or broken shelves. Consumable parts (such as filters) are excluded from warranty coverage.
3. Damage resulting from accident, alteration, misuse, abuse, fire, flood, acts of God, improper installation,
   installation not in accordance with electrical or plumbing codes, or use of products not approved by
   warrantor.
4.  Replacement parts or repair labor costs for units operated outside the United States.
5. Repairs to parts or systems resulting from unauthorized modifications made to the appliance.
6.  The removal and reinstallation of your appliance if it is installed in an inaccessible location or is not installed in accordance with published installation instructions.

DISCLAIMER OF IMPLIED WARRANTIES – LIMITATION OF REMEDIES THE CUSTOMER’S  SOLE AND EXCLUSIVE REMEDY UNDER THIS LIMITED WARRANTY SHALL BE PRODUCT  REPAIR AS PROVIDED HEREIN. IMPLIED WARRANTIES, INCLUDING WARRANTIES OF  MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE, ARE LIMITED TO ONE  YEAR. WARRANTOR SHALL NOT BE LIABLE FOR INCIDENTAL OR CONSEQUENTIAL  DAMAGES. SOME STATES DO NOT ALLOW THE EXCLUSION OR LIMITATION  OF  INCIDENTAL OR CONSEQUENTIAL DAMAGES, OR LIMITATIONS ON THE DURATION OF  IMPLIED WARRANTIES OF MERCHANTABILITY OR FITNESS, SO THESE EXCLUSIONS OR  LIMITATIONS MAY NOT APPLY TO YOU. THIS WARRANTY GIVES YOU SPECIFIC LEGAL  RIGHTS AND YOU MAY ALSO HAVE OTHER RIGHTS, WHICH VARY FROM STATE TO STATE.

WARNING:  This product can expose you to chemicals including Nickel (Metallic) which is known to the State of  California to cause cancer. For more information go to www.P65Warnings.ca.gov Note: Nickel is a component in all stainless steel and some other metal components.

FELIX STORCH, INC.
Summit Appliance Division
ISO 9001:2015 registered
770 Garrison Avenue
Bronx, New York 10474
www.summitappliance.com

For parts and accessory ordering,
troubleshooting and helpful hints, visit:
www.summitappliance.com/support
Printed in the USA
February 2020

SUMMIT 20″ wide gas range

42″ x 19.5″ x 23.5″ (H x W x D) 20″ wide gas range in white with sealed burners; replaces RG200W
Highlights:
Slim 20″ width is ideal for any space-challenged kitchen Sealed burners for safer, cleaner cooking Classic white-on-white finish includes color-matched knobs and handle.

Product Features:

Sealed burners                     Four sealed burners with removable cast iron tops ensure safer, cleaner cooking
LP kit included                    Unit is set for natural gas but can be converted aftermarket with the included LP kit
Large oven                          Full 2.3 cu.ft. interior in slim 20″ width
High output burner             Front left burner features 12,500 BTU output for powerful cooking
Two semi-rapid burners      Two right burners operate at 9,500 BTU to handle most heating needs
Low output burner              Rear left burner reaches maximum of 5,000 BTUs to allow more precise heating of sensitive items
Continuous grates               Two sets of grates are removable for easy cleaning, with solid construction to support large pots and pans
Broiler compartment          Drop-down lower compartment offers the ideal conditions for broiling
Push-to-turn knobs             Safety knobs help prevent accidents from turning on the oven or burners.

RG200WS1 Specifications:

Overview
Height of Cabinet              42.0″ (107 cm)
Width                                19.5″ (50 cm)
Depth                                23.5″ (60 cm)
Depth with Handle            25.75″ (65 cm)
Depth with door at 90°     43.25″ (110 cm)
Door                                     White
Cabinet                                 White
US Electrical Safety              CSA
Canadian Electrical Safety    CSA-C
Voltage/Frequency              115 V AC/60 Hz
Weight                                  130.0 lbs. (59 kg)
Shipping Weight                   145.0 lbs. (66 kg)
Parts & Labor Warranty       1 Year
UPC 761101058269Gas Range
Ignition                                    Spark
LP Convertible                         Yes
Oven Capacity                          2.3 cu.ft
Cooktop Surface                       Metal
Burner Type                              Sealed
Number of Burners                   4
Burner #1 BTU                       12000.0
Burner #2 BTU                       9500.0
Burner #3 BTU                       9500.0
Burner #4 BTU                       5000.0
Burner Controls                      Dial
Oven Controls                         Dial
Backguard                                Yes
Cleaning Type                          Manual
Oven Rack Qty                        2
Oven Interior Height              15.25″ (39 cm)
Oven Interior Width               14.5″ (37 cm)
Oven Interior Depth               17.5″ (44 cm)
Broiler Location                      Below OvenSUMMIT APPLIANCE DIVISION, FELIX STORCH, INC. | ISO 9001:2015 Certified
770 Garrison Avenue Bronx, NY 10474 USA TEL 718-893-3900 FAX 844-478-8799 info@summitappliance.com
www.summitappliance.com