Installation Instructions

Starlink Volcano Mount

If you are uncomfortable with any part of the installation process, do not attempt – contact a professional to install your Starlink. Starlink is not responsible for damage to property caused by the installation process.

Please be aware that inclement weather (e.g., heavy rain, snow, or wind) can affect your satellite internet connection, potentially leading to slower speeds or a rare outage.

The Starlink will detect and melt snow that falls directly on it; however, accumulating snow around the Starlink may block the field of view. We recommend installing Starlink in a location that avoids snow build-up and other obstructions from blocking the field of view.

If your Starlink App displays a “Motor’s Stuck” alert, your Starlink may be mounted in a way that it cannot reach its optimal angle to connect with the satellites. We advise mounting your Starlink within 40 degrees of vertical. Mounting your Starlink in a horizontal position (i.e., on the side of your chimney), will not allow it to operate.

INSTALLATION CONDITIONS

WARNING! The power supply and router are restricted to indoor use only.
WARNING! Mounts are not designed for hurricane/tornado wind loads. Tethering should be used in all cases to prevent failure in an unexpected wind event.

SAFETY NOTICES

WARNING! To reduce the risk of injury, electric shock, or
fire, follow basic safety precautions, including:

• Make sure the product’s power is disconnected before accessing, moving, or installing the Starlink (aka “Dishy McFlatface”). Starlink contains moving parts when powered on.
• Plug the power cord into an AC outlet that is easily accessible at all times. If the power cord has a 3-pin attachment, plug the cord into a grounded (earthed) 3-pin outlet.
• Only use the AC adapter and power cord provided with the system or purchased from SpaceX.
• Do not operate this product with a damaged power cord set. If the power cord is damaged, replace before using this product.
• During operation, do not allow the AC adapter to contact skin or a soft surface, such as carpet/rug or clothing. The product and the AC adapter comply with the user-accessible surface temperature limits defined by applicable safety standards.

Do not operate this product if you notice crackling, hissing, popping sounds, a strong odor, or smoke coming from any parts of the system. Turn off the system, disconnect from power source, and contact Starlink technical support for assistance.

WARNING! To avoid injury to persons and damage to property when drilling, take caution and follow basic safety procedures, including:

• Wear appropriate eye, hand, and face protection.
• Avoid studs, electrical wiring, and water lines when drilling. Drilling into any of these can lead to fire, shock, injury, or death.
• Drill at a slight downward angle from the home interior to the home exterior and thoroughly apply sealant. Improper drilling and sealing may lead to water and/or bug intrusion and/or damage.

For more safety, regulatory, labeling, and disposal information, refer to the Regulatory Notices in the main internet kit.

The information contained herein is subject to change without notice. SpaceX shall not be liable for technical or editorial errors or omissions contained herein.

Box Contents

Additional Items Needed

Find A Spot

Clear view (100 degrees) of the northern sky over the perimeter of rooftop.

Choose A Route

Avoid placing the Starlink above livable areas. The Starlink should be mounted on an overhang.
SETUP.

Install Instructions

1. Find stud on roof using a stud finder.

2. Place mount over stud and mark six circles on roof.

3. Drill pilot holes into the six marked circles.

4. Create six oversized balls from the sealing tape squares and press over each hole, overlapping the edges

5. Set the two sealing tape strips over the six holes where the volcano mount will sit.

6. Line the six holes on the mount over the six pre-drilled holes. Starting with the center holes, drive lag bolts ~90% in.

7. Use the socket wrench to tighten lag bolts to be snug plus 1/4 turn.

8. Place the Starlink and cable into the carrying bag and carry to the install location. Do not set the Starlink directly onto roof.

9. Place the mast of the Starlink into the hole at the center of the mount. Mount Starlink within 40° of vertical.

10. Unravel your connected cable coil. Route the loose end into your home and connect to the power supply.

11. Use wall clips to fasten the cable to the wall along your route. Avoid puncturing cable and sharp bends, and follow horizontal/vertical lines.

Never set the Starlink directly onto roof. Directly place the S tarlink i nto mount and remove carrying bag.

Plug Everything In

Do not manually tilt the Starlink, it will automatically point itself towards the sky shortly after connecting to power source.

Connecting to Satellites

Ensure your hands and other objects are out of the way of the Starlink. If the Starlink does not
connect to the internet within 30 minutes, power cycle by unplugging and reconnecting the black
cable to the power supply.

Connect to Wi-Fi

Once the LED is glowing solid white or red, use your Wi-Fi enabled device to connect using the Network ID printed on the back of the Wi-Fi router.

Can’t Get Online?

1. Power cycle the Starlink/router by unplugging the power supply for 30 seconds.
2. Check that your mounting location is correct:
   • Does the Starlink have a clear view of the sky?
   • Are you installing your Starlink at the address you used when placing your order?
3. If none of these work, contact Starlink Customer Support by logging into your account on starlink.com.

Change Network ID/Password

1. If you already have a network ID/password set up, press the reset button at the bottom of your router. If not, skip this step.
2. When connected to the network, open a browser window on any device and follow the instructions.
3. Wait ~2 minutes and rejoin network with your personalized credentials.

Prefer a hardline connection over Wi-Fi? Connect by plugging your computer directly into the upper port of the Wi-Fi router (ethernet cable not included) or into the white port on the power supply.

Starlink Install Guide

How to setup and install your Starlink Kit

Find A Clear View of the Sky

Your Starlink needs a clear view of the sky so it can stay connected with satellites as they move overhead. Objects
that obstruct the connection between your Starlink and the satellite, such as a tree branch, pole, or roof, will cause
service interruptions.

To find a location with a clear view of the sky:

1. Download the Starlink App.
2. Use the “Check for Obstructions” tool to find an install location that will deliver the best service.
3. For best results, Starlink should be installed as close to vertical as possible.

If you could not find a clear field of view from the ground level, consider installing in an elevated location,
like a roof, pole, or wall. Additional mounts and accessories are available for purchase on the Starlink Shop.

Plug Starlink In

1. Put Starlink into base and plug into power.

2. Starlink will automatically level itself to search for satellites overhead. Do NOT attempt to manually adjust your Starlink.
3. After a few minutes, Starlink will make an initial connection to the Starlink constellation and tilt to the optimum angle for satellite coverage (slightly north or south based on your location in the northern or southern hemisphere).

Connect to WiFi

1. On your device, find and connect to the STARLINK network in your WiFi settings.

2. Once connected, a browser window will open prompting you to enter a new SSID (Network name) and password. This step is optional but recommended.

3. You are now connected! Open the Starlink App to customize additional settings, check your connection, and more.

Can’t Get Online?

1. Open the Starlink App to check for any alerts, outages, or obstructions.
2. Check the WiFi router light.
3. Make sure everything is securely plugged in and there is no damage to hardware or cables.
4. Confirm you are at the correct service address listed on your account.
5. Power cycle Starlink by unplugging from power and then plugging back in.
6. If none of these works, contact Starlink Customer Support by logging into your account on starlink.com

For Further Assistance

Find answers to frequently asked questions, installation education, and additional troubleshooting in the
Starlink App and the Support section of starlink.com.

APPLICATIONS

Best for residential users and everyday internet applications like streaming, video calls, online gaming & more.

WHAT’S IN THE BOX

Your Starlink Kit includes everything you need to connect to the internet including your Starlink, WiFi router, power supply, cables, and base.

STARLINK

STARLINK WIFI ROUTER

MOUNTS & ACCESSORIES

Mounts designed to permanently install on a roof, pole, or wall to avoid obstructions are available for purchase on the Starlink Shop once your Starlink is ready to ship. Cable routing kits, extended cable lengths, mesh nodes, and ethernet adapters are also available.

PIPE ADAPTER MOUNT

Designed to attach to any pole with a max diameter of 2.5” (64 mm). Slide adapter over the top of the existing pole, fasten provided screws, and drop Starlink in.

Tools Needed:
7/16” (11.1 mm) Socket Wrench
Package Dimensions:
8.3” x 5.5” x 3.4” / 21 x 14 x 8.7 cm
Package Weight: 1.35 lbs / 0.6 kg
Compatibility: Rectangular Starlink

SHORT WALL MOUNT

Designed for installation on an exterior wall, near the top of the gable.
Drilling required.

Tools Needed:
Drill, Stud / Electrical Finder, Socket Wrench, Level,
5/32” (4 mm) Drill Bit, 0.5” x 2.5” (12.5 mm x 63.5 mm)
Socket, Pencil

Package Dimensions:
8.3” x 5.5” x 3.4” / 21 x 14 x 8.7 cm
Package Weight: 1.4 lbs / 0.6 kg
Compatibility: Rectangular Starlink

LONG WALL MOUNT

Designed for installation on an exterior wall near the top of the gable; extra length provides clearance of overhang when needed. Drilling required.

Tools Needed:
Drill, Stud / Electrical Finder, Socket Wrench,
Level, 5/32” (4 mm) Drill Bit, 0.5” x 2.5” (12.5 mm
x 63.5 mm) Socket, Pencil

Package Dimensions:
19.1” x 5.5” x 4.7” / 48.5 x 14 x 11.9 cm
Package Weight: 1.4 lbs / 0.6 kg
Compatibility: Rectangular Starlink

GROUND POLE MOUNT

Designed for in-ground installation when roof or wall mounting is not possible;
requires digging.

Tools Needed:
Shovel, Mortar Hoe, Mixing Trough / Bucket, Gloves,
Concrete Mix, and Water

Package Dimensions:
45.7” x 4.5” x 2.4” / 116 x 11.5 x 6.1 cm
Package Weight: 9.43 lbs / 4.27 kg
Compatibility: Rectangular Starlink

PIVOT MOUNT

Designed for installation on shingled roofs, recommend installing closer to edge for cable routing. Not recommended for tile, slate, and clay roofing.
For best results, Starlink should be installed as close to vertical as possible.

Tools Needed:
Drill, 5/32” (4 mm) Drill Bit, 1/2” (12.7 mm) Socket Wrench

Package Dimensions:
9.7” x 5.5” x 3.1” / 24.7 x 14 x 7.9 cm
Package Weight: 2.21 lbs / 1.0 kg
Compatibility: Rectangular Starlink

FLASHING MOUNT

Designed for water-tight protection when installing Starlink on shingles or siding and provides storage for extra cable.
Requires additional purchase of Pivot Mount.

Tools Needed:
Drill, Phillips Head Drill Bit, 5/16” (7.9 mm) and 7/16” (11.1 mm)
Socket Wrenches, 7/16” (11.1 mm) Wrench, Utility Knife, Pry Bar,
Roof Cement, Measuring Tape, Stud Finder, Pencil, and Goggles

Mount Dimensions:
10.58” / 26.89 cm, Width: 9.07” / 23 cm, Height: 1.97” / 5 cm

Package Dimensions:
15 5/8” x 15 ¼” x 3” / 39.7 x 38.7 x 7.6 cm
Package Weight: 7 lbs / 3.2 kg
Compatibility: Rectangular Starlink

STARLINK CABLE

75’ Starlink Cable is designed to replace the standard cable from the Starlink Kit in case of damage.

Package Dimensions:
5.87” x 2.0” x 17.17” / 14.9 x 5.1 x 43.6 cm
Package Weight: 3.09 lbs / 1.4 kg
Compatibility: Rectangular Starlink

150’ Starlink Cable is designed to replace the standard cable from the Starlink Kit when additional length is needed between your install location and the router.

Package Dimensions:
12.25” x 3.5” x 12.75” / 31.1 x 8.9 x 32.4 cm
Package Weight: 6.06 lbs / 2.75 kg
Compatibility: Rectangular Starlink

ETHERNET ADAPTER

Designed to connect a device directly to the Starlink Router for a wired connection.
Supports up to 1 Gbps speeds.

Package Dimensions: 6.5” x 4.5” x 1.5” / 16.5 x 11.4 x 3.6 cm
Package Weight: 0.33 lbs / 0.15 kg
Compatibility: Rectangular Starlink

CABLE ROUTING KIT

Designed for drilling through most walls.
Not recommended for masonry, concrete, or hard coat stucco. Best for customers with prior internet cable routing experience and installation; must be comfortable drilling through walls. Kit includes a spade bit, drill bit, cable routing tool, silicone sealant, grommets, and wall clips.

Tools Needed: Drill, Stud / Electrical Finder

Package Dimensions: 3.75” x 5.25” x 1.75” / 34.9 x 13.3 x 4.4 cm
Package Weight: 0.83 lbs / 0.38 kg
Compatibility: Rectangular Starlink

MASONRY ROUTING KIT

Designed for drilling through masonry, concrete or hard coat stucco (excluding EIFS) walls. Best for customers with prior internet cable routing experience and installation; must be comfortable drilling through walls. Kit includes a spade bit, drill bit, cable routing tool, silicone sealant, grommets, and wall clips.

Tools Needed:
Hammer, Hammer Drill, Phillips Head Drill Bit,
Stud / Electrical Finder, Goggles, Gloves, and Mask

Package Dimensions:
13.875” x 6.5” x 1.75” / 35.2 x 16.5 x 4.4 cm
Package Weight: 2.1 lbs / 1 kg
Compatibility: Rectangular Starlink

RESOURCES / Download

• Starlink Standard Installation Guide – [ Download PDF ]
• Starlink Standard Accessories – [ Download PDF ]
• Starlink Standard Detailed Specs & Drawings – [ Download Zip ]
• Starlink Standard – [ Starlink App (iOS) ]
• Starlink Standard – [ Starlink App (Android)

FAQ – FREQUENTLY ASKED QUESTIONS

How do I set up Starlink?

WATCH VIDEO – Starlink Install
Starlink is easy to set up!
Find a clear view of the sky.Use the “Check for Obstructions” tool on the Starlink app (iOS, Android) to find the install location that will deliver the best service.
Plug Starlink into power.
Within a few minutes, your Starlink will connect to satellites.First, Starlink will automatically level itself to search for satellites overhead. Do NOT attempt to manually adjust your Starlink.
Next, Starlink will make an initial connection to the Starlink constellation and tilt to the optimum angle for satellite coverage – slightly north or south based on your location in the northern or southern hemisphere.
Connect to high-speed Starlink internet from your device!Note: Your Starlink may need to download the latest software after initial setup for optimal performance. This will happen automatically overnight or you can watch your Starlink app for messages about the update status.

Set Up Guide – Rectangular (PDF)

Set Up Guide – High Performance (PDF)

Set Up Guide- Circular (PDF)

Experiencing issues getting online after reviewing the setup guides?
Connect to your Starlink WiFi > Open the Starlink App > See if there are any alerts on the home screen.If you are unable to connect to your Starlinlk WiFi, please follow this troubleshooting guide: Cannot connect to the Starlink Router
If there are no alerts, please navigate to the topic to troubleshoot based on what the App screen says:App Says Starlink is Offline – Disconnected
App Says Starlink is Offline – Booting
App Says Starlink is Offline – Searching
If you have a different question about your account or service, please go back and select a different topic.

How do I download the Starlink App?

The Starlink app helps you find the best location for Starlink, check for obstructions, customize settings, receive updates, and access Support. The app has access to important troubleshooting data which helps resolve your issue faster, so we recommend contacting Support through the app.
From your mobile device, download the Starlink app using the appropriate link:
Download for iOS
Download for Android

What comes in my Starlink Kit?

Your Starlink Kit includes everything you need to connect to the internet including your Starlink, WiFi router/power supply, cables, and base.
The Starlink base is designed for ground level installation, or to support a quick start setup to test your internet connection. Many customers find that a permanent mount provides the best installation and service. Additional mounts and accessories are available for purchase on the Starlink Shop once your Starlink Kit is ready to ship.

Set Up Guide (PDF)
Starlink Accessories Guide (PDF)

Set Up Guide (PDF)
Starlink Accessories Guide (PDF)

Set Up Guide (PDF)
Starlink Accessories Guide (PDF)

My order is ready but I am not. What do I do?

If you have missed the email to Confirm Your Order, or are not ready to proceed with your Starlink Kit order within the 7 day window, your order will be cancelled and your deposit will be refunded to the original form of payment.
When you are ready to resubmit your interest in Starlink, sign in to your account and place a new Starlink Kit order by clicking “+” in the Locations section of your Account page. If you do not see a “+” sign in your account, please sign up again on Starlink.com using a new email. When the address has availability, you will receive a new confirmation email with a new 7 day window.
We are unable to adjust or delay delivery timelines or service/billing start dates.

I have received the email to confirm my order, but my information is incorrect or has changed. What do I do?

When you click Confirm My Order in the email, it will redirect you to an order confirmation screen on your account page. From there, you can review the following details:
– Service address: Changing your service address is subject to availability. If the new service address does not have availability at that time, your order will not be processed and you will see a new expected service date on your account page. You will still hold your place in the queue at the new location.
– Shipping address: Changing the shipping address registered to your account or any pending order is not supported. If you need any item shipped to a different address than the address listed on your existing order click here
– Payment Method: Please be sure your card is not expired. If your bank requires a 3D verification, you will be redirected to verify your payment by receiving a PIN code via text.

When does my billing start?

Your billing begins 14 days from the day your Starlink Kit ships, and is not dependent on install or usage. You can return Starlink within 30 days of receipt for a refund on hardware (shipping not included). This allows time to test your Starlink and set up location to make sure Starlink is a good fit for you.
Note – a statement will be generated 7 days prior to the billing due date as a reminder for upcoming charges.

How much is my monthly service price? How much is the Starlink Kit?

Go to Starlink.com, enter your address, and click “Order Now” to preview the price breakdown in your area.

What is Starlink’s Portability Feature and Policy?

For an additional monthly fee, the Portability feature enables users to temporarily move their Starlink to new locations in order to receive service anywhere within the same continent Starlink provides active coverage. To see active coverage areas, please view the Starlink Availability Map. Portable users are served best effort and can expect lower service levels than fixed users, particularly in areas marked as “Waitlist” on the Availability Map.
Add Portability on Your Account:
– If you are an active customer, you can enable Portability from your account page and it will take effect immediately.
– If you purchased Portability before receiving your Starlink as a new customer, you must first power on your new Starlink at the Service Address listed in your account so your Starlink can update its software. Once updated, the Starlink will then be configured for Portability.
– If you have multiple Starlinks, Portability must be selected and purchased for each location.
– When you enable Portability, you are charged on your next monthly invoice. Portability is charged in full monthly increments and cannot be pro-rated. The Portability feature and billing charges will be ongoing until you decide to disable it.  Once you disable Portability, the recurring charge will stop after your next monthly invoice and Portability will only remain active for the remainder of the current billing cycle. For example, if you enable Portability on March 12th and your next billing date is on April 1st, you will be charged $25 on April 1st for the full previous month.

Limitations:
– Best Effort Service: Portability service is provided on a best effort basis. Stated speeds and uninterrupted use of services are not guaranteed. Starlink prioritizes network resources for users at their registered service address. When you bring your Starlink to a new location, this prioritization may result in degraded service, particularly at times of peak usage or network congestion.
– International Travel: Starlink can only be used within the same continent as the registered Service Address. If you use Starlink in a foreign country for more than two months, you will be required to move your registered service address to your new location or purchase an additional Starlink to maintain service.
– No In-Motion Use:  We do not support Starlink use in motion at this time. Using the Starlink Kit in motion will void the limited warranty of your Kit. While our teams are actively working to make it possible to use Starlink on moving vehicles (e.g., automobiles, RVs, boats), Starlink is not yet configured to be safely used in this way.

What is Starlink for RVs?

Immediate access to high-speed, low-latency internet on an as-needed basis at any destination where Starlink provides active coverage. The service can be paused or un-paused at anytime. At this time, there is no waitlist – all orders will be shipped shortly after the order is placed. However, supply is subject to network and equipment availability.
– We do not support Starlink use in motion at this time.
– To read more on the limitations on Starlink for RVs, click here.

Starlink Router User Manual

Starlink Router User Manual

SETUP

Plug everything in

Power up the Router by connecting the white Ethernet cable between the white Power Supply port and the bottom port of the Router. When everything is connected correctly, the Router LED will glow a pulsing white.

Power Supply LED: When the Router is powered, the LED glows solid white
Router LED: Pulsing White: Initializing Solid White: Waiting for Internet Solid Blue: Connected to Internet

CONNECT

Connect to the Router

Once the Router LED is solid white and no longer pulsing, the software is initialized and the Router is ready for login. This takes approximately 2 minutes. Connect using the Network ID and password. Once the system has successfully established an internet connection, the Router LED will glow blue, and you will be able to browse the web.

No WiFi device?
You can also connect by plugging your computer directly into the upper port on the Router or into the white port on the Power Supply (Ethernet cable not included)

SETUP TIPS

Cant Get Online?

1. Check your Internet source to ensure it is online.
2. Power cycle the Router by unplugging and reconnecting the cables.
3. If these don’t work, contact Starlink customer support.

Changing Your Network ID Or Password

• Access the Router Admin Portal by entering this IP address into a browser: 192.168.1.1.
• For the user name, enter the serial number (S/N) printed on the back of the router. Enter the default password, also printed on the router.
• Once logged into the Admin Portal, navigate to the Wi-Fi settings page, and change the WLAN Settings under both the 2.4GHz and 5GHz tabs.

Other top starlink manuals:

• STARLINK Router Installation Guide
• Starlink Router User Manual
• STARLINK Mesh WiFi Router Installation Guide

Federal Communications Commission Notice

This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:

1. This device may not cause harmful interference, and
2. This device must accept any interference received, including interference that may cause undesired operation.

This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules.
These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one of the following measures:

• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.

FCC Caution: Any changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate this equipment.
This transmitter must not be co-located or operating in conjunction with any other antenna or transmitter.

Radiation Exposure Statement:
This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with minimum distance 23cm between the radiator & your body.

Industry Canada statement

This device complies with ISED’s licence-exempt RSSs. Operation is subject to the following two conditions:

1. This device may not cause harmful interference, and
2. This device must accept any interference received, including interference that may cause undesired operation.

Caution: the device for operation in the band 5150-5250 MHz is only for indoor use to reduce the potential for harmful interference to co- channel mobile satellite systems;

Radiation Exposure Statement

This equipment complies with ISED radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with greater than 28cm between the radiator & your body.

WARNING: To reduce potential safety issues, only the AC adapter and power cord provided with the system, a replacement provided by SpaceX, or purchased as an accessory from SpaceX should be used.

Download
Starlink Router UTR-201 Manual – Original [pdf]
Starlink Router UTR-201 Manual – Optimized [pdf]

FAQs

What is Starlink Satellite Internet?

Starlink is a satellite internet service operated by SpaceX. Starlink is intended to provide broadband access to most of the earth. This will enable people living in rural areas to have access to fast and reliable internet

Does Starlink Have Unlimited Data?

Yes, Starlink has unlimited data in 2022. They do not have any data caps. Starlink is currently the only satellite internet service available in North America with truly unlimited and unthrottled data. The lack of data caps makes Starlink suitable for streaming and gaming.

Is Starlink Reliable?

Starlink, is a brand new technological marvel from SpaceX. It is an amazing technology with a bright future ahead. Service is generally reliable as of 2022, however drops do happen periodically. These can range from a few seconds to a few minutes and occur several times a day.

Does Starlink Work On Cell Phones?

Starlink is not intended to replace cell towers or 5G technology. Starlink is a fixed internet service that is designed to provide broadband to homes in rural areas

Is Starlink Faster Than Cable Internet?

Starlink is not faster than cable internet in 2022. Latency is also much lower with a cable internet connection. The primary advantage of Starlink is its ability to cover rural areas that lack access to cable internet. Starlink is not intended to replace cable internet.

Is Starlink Faster Than Fiber Internet?

Starlink is not faster than fiber internet. Latency is also much lower with a fiber internet connection. The primary advantage of Starlink is its ability to cover rural areas. Fiber internet is not available in most rural areas. If you have a choice between fiber and Starlink, go with fiber.

Is Starlink Faster Than DSL Internet?

Starlink is generally faster than DSL. Average download and upload speeds are higher with Starlink Internet Service.

Can I Use My Own Router With Starlink?

Yes you can use your own router with Starlink. However for the easiest setup you may want to use the included router. Using your own router is useful if you want to use features not included in the Starlink router. The Starlink router will be adequate for most people

Is Starlink Good for Gaming?

Starlink is much better for gaming than other satellite internet services. Starlink is not as good for gaming as a cable or fiber internet connection due to slightly higher latency and more frequent drops

What is Starlink’s Ping (Latency)?

Starlink averages about a 35 ms ping in most locations. Occasionally ping times will spike and packets will get dropped as Starlink switches between satellites. Starlink’s ping is similar to that of DSL and a bit higher than the 15 ms that is typical with cable or fiber internet.

Does Starlink Use CGNAT?

Unfortunately yes, Starlink uses carrier-grade NAT for IPv4 addresses much like a cellular internet connection. They also do not currently support IPv6 officially.