SOUNDSTREAM Digital Bass Machine BX-15 Owner’s Manual

Digital Bass Reconstruction Processor

Congratulations on purchasing the SOUNDSTREAM BX. You are now the proud owner of the most
refined and most accurate bass enhancing & restoration system available.
Whether your interest is in Beethoven’s kettle drums, in Miles Davis’ trumpet, or the percussion of Rap
music, the BX will restore those long-lost missing bass with fantastic accuracy and clarity.
There’s a dash-mounted level control unit that permits instant adjustments, whether it’s because your
passenger is not as much a “bass-head” as you are or, for whatever reason, you want to turn it down a
bit; this handy knob does the trick.

• Model & Serial Number _____________________________________
• Authorized Dealer Name ____________________________________
• Date of Purchase __________________________________________

Four Factors affect the Bass Response:

1. The acoustics of the vehicle
2. The locations of the speakers
3. The music in which how it’s recorded
4. Speakers and speaker enclosure types.

Because of the variations in the recording process, we developed Soundstream’s BX to help restore any low frequencies lost during the recording process. However, the acoustics of various environments are different.

The Sweep control allows you to select a center frequency ( the frequency most affected) between 27 and 63 Hz. The Width control then you can control the shape of the filter centered around the Sweep frequency.

Product Features

Bass Restoration: The BX contains a Bass Restoration circuit that accurately injects Low-frequency information back into the signal path. What that means in simple terms is that the BX will give more bass impact to your collection of music.

Bass Equalization Circuit: The BX has a unique equalization circuit that contours the restored bass to your speaker systems.

Dash Mount Remote Control: The BX comes with Dash Mountable Remote Control allow you to enjoy the effects of the BX without leaving the driver’s seat. The Dash Mount Control has a LED indicator; this LED will grow brighter as you add more bass or dim when you decrease the gain knob.

Bass Maximizer Indicator: Not only does the BX provide great music to your ears, but it gives you the same visual enjoyment as well. On the Chassis of the BX, three LED indicators flash when the bass maximization circuit is activated.

Connections

Power Connection

• +12V: Battery/Constant +12 Volt
• Remote: Connect to amplifier Turn-On – Behind Radio or True Ignition Source
• GND: Connect to Vehicle Chassis (-)

RCA Connection

Balanced Input – Connect your Low-Level signal from your vehicle’s source unit or input converter if you are not using an aftermarket radio. Designed to handle extreme signals!

Output – This should be connected to your bass amplifiers; this kit does not come with any RCA’s cables. Make sure and measure and purchase separately to complete the installation

Dash Remote – This is your knob, wait… you know what we mean?! Connect provide dash level controller and provided cable to install somewhere in drivers reach for adjustments

Picture to help illustrate input and outputs

Setting the Bass Output Control

The BX is a powerful bass component. This device is equipped with several different Bass Output selections. If you should need to change the settings, please use the chart below for guidance. It is recommended: listen using the factory setting before changing your Bass Output settings.

Product Specifications

Product Functions

1.  Input: The inputs of the BX use a balanced input to help minimize induced noise. They are also designed to handle very high signal voltages up to 15 volts.
2. Outputs: These RCA connectors should be connected to the next component after the BX, such as crossover, equalizer, or amplifier.
3. Dash Remote Control
4. Power Connector
5. Para-Bass Controls: These two knobs control the Para-Bass functions of the BX. The SWEEP knob allows you to pick the center frequency that you want the BX bass restoration circuit to maximize. The WIDE knob adjusts how wide of a frequency range the BX will affect.
6. The PFM Subsonic Filter Switch: The BX utilizes a PFM Subsonic Filter Switch, which will help with speaker control and amplifier power management. This PFM Subsonic Filter Switch comes with three frequency selections 35Hz / 50Hz / 80Hz. On most systems, setting the switch at 33Hz is fine. If you want to protect your speaker system even more, you should try a higher frequency. Often a higher frequency sounds louder and cleaner.
7. Bass Maximizer Indicator: These three LED indicators flash when the bass maximization circuit is activated.
8. Power-On LED.
9. Input Ground: For the Most system, you can leave this jumper set in the BALANCE position. In some scenarios, the source unit may look for ground through the RCA connectors; even you should change the jumpers to the UNBALANCE position.
   
10. Ground Isolation Jumper: Occasionally, an alternator whine may appear in a system because the source units and amplifiers have different grounds. To help this situation, we have provided alternative ground connections; make sure your system is of before making this change.
11. Bass Output Control Jumpers: Not all systems are designed the same; some systems are designed strictly for SPL (Sound Pressure Level) while others a little tamer. The Bass Maximizer circuit can either increase or decrease the signal voltage to your liking. You may change these jumpers to higher or lower settings to maximize your bass output and protect your speakers. Factory settings usually work just fine; we recommend you try that first.

Troubleshooting Guide

If the unit does not turn on and the power indicator LED is NOT illuminated, start with this:

1. Check and make sure that B+ and GND are not reversed
2. Check power wire is correctly connected and have the appropriate potential (11- 16 volts)
3. Check that the fuse is functioning correctly.

If you experience high audible distortion or low output volume:

1. Check that the input and output levels are set correctly. Input should match the source, and output should match the sensitivity of the host.
2. Check the crossover settings; make sure they are correct; for high “Q” system s, set the crossover half an octave above the desired point and for low “Q” systems, put it 1 octave or more above.

If you experience whining or engine noise:

1. Verify that the GND connection is secure; the conductor (wire) is not too thin and unnecessarily long.
2. Check that the +12V wire is not too thin and unduly long.
3. Change the power source; try connecting a different power source.

Still, having trouble? Contact our Tech-Support
(800) 832-4647
OR
[email protected]

Warranty

Soundstream Technologies warrants this product to be free from defects in materials and workmanship under everyday use and conditions for one year if installed professionally by an authorized dealer or for one year if selfinstalled from the original purchase date. Should any service be required for any reason due to a manufacturing defect or malfunction during the warranty period, we will repair or replace at our discretion the defective merchandise at no charge upon delivery of the product to the address shown below with a copy of the proof of purchase if it is within its warranty period as stated above.

1. Enclose with your defective product a brief description of the problem with your name and daytime phone number so we may contact you with any questions or concerns regarding your return.
2. Enclose a copy of your original sales receipt for proof of purchase and installation.
3. Enclose a $25.00 US certified check or money order to cover shipping and handling for the return of your product. Do not include cash.
4. Carefully pack your product to protect it from damage during shipping and send it prepaid to:

Soundstream Technologies c/o Customer Service
1550 S. Maple Ave.
Montebello, CA 90640

Please note your warranty will not cover the following:

1. Any units that have been misused or physically damaged.
2. Any units that have been previously opened or repaired by a service center that is not authorized.

Any applicable and implied warranties, including the warranty of the merchant’s ability, are limited to a maximum of one year from the original date of purchase at retail, and no warranties, whether expressed or implied, shall apply to this product after that. Under no circumstance shall be liable for any damage, direct or consequential, arising out of the use of or inability to use this product. Some states do not allow for limitations of implied warranties or exclusions of significant damage; therefore, these restrictions may not apply to you. To receive the benefit of this warranty, fill out the attached warranty card and mail it to the address on the lower reverse side.

1550 S. Maple Ave
Montebello, CA 90640
Direct (800) 832-4647

SOUNDSTREAM Shallow Mount Car Stereo Subwoofer

A new addition for 2017, Picasso shallow subwoofers combine performance and value. These shallow subwoofers perform best in small sealed enclosures, with minimal power requirements, thanks to efficiencies in cone and suspension design.

FEATURES, PARAMETERS, & SPECIFICATIONS

• Pressed Spruce Pulp Cone w/Polypropylene Coating Protection
• High Density Polyether Foam Surround w/ UV & Cheical Protection
• 2.00” 4-Layer 4-ohm Voice Coil w/ Large Gauge Wire Increases Power Handling
• Nickel Plated 8ga Spring-Loaded Compression Wire Terminals
• Poly-Cotton Composite Suspension Dampen Violent Accelerations
• Formed Steel Subwoofer Frame with Black Powder Coat Finish
• 1-pc Gasket Trim Ring w/ Concealed Mounting Holes Included
• Stitched Voice Coil Leads Prevent Potential Damage
• High-Temperature Tolerance Adhesives Resist Thermal Failure
• 6mm T-Yoke & Top Plate Improve Low Frequency Dynamics

ENCLOSURE DESIGN & WOOFER INSTALLATION

Vehicle conditions, amplifier, music preferences, & other variables make it difficult to give you exact dimensions for an enclosure deisgn. For enclosure designs tailored to your specific needs, please contact us at [email protected], or 1-800-724-1377.

All enclosures should be made of .75” (3/4”) material only. When possible, make the baffle 1.5” (1 ½) thick and add .75” (3/4”) to the depth of the enclosure to compensate. All volumes INCLUDE vent/port and subwoofer displacements.
DO NOT change the volume unless you plan on adding a substantial amount of bracing. For added performance, applying a coat of fiberglass resin to the interior walls will greatly improve sealing the enclosure. Adding a thin layer of poly-fill will improve response by smoothing out reflections within the enclosure.

Below are recommended enclsoure designs and their expected performance:

LIMITED 90-DAY CONSUMER WARRANTY

LIMITED TWO-YEAR CONSUMER WARRANTY WITH PURCHASE AND INSTALLATION BY A SOUNDSTREAM AUTHORIZED RETAILER

Soundstream promises to the original purchaser, to repair or replace this product with a new or refurbished unit (at Soundstream’s sole and absolute discretion) should it prove to be defective in workmanship or material under normal use, for a period of two-years from the date of purchase from the Soundstream authorized retailer, PROVIDED the product was purchased and installed by a Soundstream authorized retailer. During this two-year period, there will be no charge for product repair or replacement, PROVIDED the unit is returned to Soundstream, return shipping pre-paid, along with the required proof of installation, the bill of sale or other dated proof of purchase, and the consumer’s contact information.

If the unit is installed by anyone other than a Soundstream authorized retailer, the warranty period will be 90-days from the date of purchase. This warranty is nontransferable and does not apply to any unit that has been modified or used in a manner contrary to its intended purpose, and does not cover damage to the unit caused by installation or removal of the unit. During this 90-day period, there will be no charge for the repair or replacement PROVIDED the unit is returned to Soundstream, return shipping prepaid, along with the bill of sale or other dated proof of purchase and the consumer’s contact information.

This warranty is void if the product has been damaged by accident or unreasonable use, neglect, improper service or other causes not arising out of defects in materials or construction. This warranty does not cover the elimination of externally generated static or noise, or the correction of antenna problems or weak reception, damage to speakers, accessories, electrical systems, cosmetic damage or damage due to negligence, misuse, failure to follow operating instructions, accidental spills or customer applied cleaners, damage due to environmental causes such as floods, airborne fallout, chemicals, salt, hail, lightning or extreme temperatures, damage due to accidents, road hazards, fire, theft, loss or vandalism, damage due to improper connection to equipment of another manufacturer, modification of existing equipment, or Product which has been opened or tampered for any reason. Units which are found to be damaged by abuse resulting in thermally damaged voice coils are not covered by this warranty but may be replaced at the absolute and sole discretion of Soundstream. Unit must be returned to Soundstream, postage pre-paid, with bill of sale or other dated proof of purchase bearing the following information: consumer’s name, telephone number, and address, authorized retailer’s name and address, and product description. Please contact Soundstream warranty office at 800-724-1377, email to [email protected], or visit Soundstream.com/warranty to obtain a Return Authorization Number prior to shipping the product.

Note: This warranty does not cover labor costs for the removal and reinstallation of the unit. IN ORDER FOR THE TWO-YEAR WARRANTY TO BE VALID, YOUR UNIT MUST BE SHIPPED WITH PROOF OF PURCHASE & INSTALLATION BY A SOUNDSTREAM AUTHORIZED RETAILER. ALL UNITS RECEIVED BY SOUNDSTREAM FOR WARRANTY REPAIR WITHOUT PROOF OF SOUNDSTREAM AUTHORIZED DEALER INSTALLATION AND PURCHASE WILL BE COVERED BY THE LIMITED 90-DAY WARRANTY.

BY PURCHASING THIS PRODUCT, ALL WARRANTIES INCLUDING BUT NOT LIMITED TO EXPRESS WARRANTY, IMPLIED WARRANTY, WARRANTY OF MERCHANTABILITY, FITNESS FOR PARTICULAR PURPOSE, AND WARRANTY OF NON-INFRINGEMENT OF INTELLECTUAL PROPERTY ARE EXPRESSLY EXCLUDED TO THE MAXIMUM EXTENT ALLOWED BY LAW, AND SOUNDSTREAM NEITHER ASSUMES NOR AUTHORIZES ANY PERSON TO ASSUME FOR IT ANY LIABILITY IN CONNECTION WITH THE SALE OF THE PRODUCT. SOUNDSTREAM HAS ABSOLUTELY NO LIABILITY FOR ANY AND ALL ACTS OF THIRD PARTIES INCLUDING ITS AUTHORIZED DEALERS OR INSTALLERS. BY PURCHASING THIS PRODUCT, THE CONSUMER AGREES AND CONSENTS THAT ALL DISPUTES BETWEEN THE CONSUMER AND SOUNDSTREAM SHALL BE RESOLVED IN ACCORDANCE WITH CALIFORNIA LAWS IN LOS ANGELES COUNTY, CALIFORNIA. Some states do not allow limitation on how long an implied warranty lasts. In such states, the limitation or exclusions of this Limited Warranty may not apply. Some states do not allow the exclusion or limitation of incidental or consequential damages. In such states, the exclusion or limitation of this Limited Warranty may not apply to you. This Limited Warranty gives you specific legal rights, and you may have other rights which vary from state to state.

Thank you for choosing Soundstream subwoofers, designed & engineered in the U.S.A. This product combines innovative technology with the finest materials to
consistently deliver absolutely state of the art performance, sound quality, reliability, and value. This Reserve subwoofer reflects our commitment to offer you unparalleled
performance and quality for years of dependable service and listening enjoyment.

In recent years, our subwoofers have evolved to meet various performance and placement goals, keeping your, the Soundstream fanatic, suggestions in mind. New for 2020, we introduce Reserve subwoofers, available exclusively to our Soundstream Reserve dealers. Premium materials & performance characteristics
include over saturated 12mm top plate and t-yoke, high density poly-ether foam surround, & a massive 900w 3” voice coil. High density Spruce pulp cone and double
polycotton blend suspension hold everything together. These behemoths are not for the faint-hearted.

FEATURES, PARAMETERS, & SPECIFICATIONS

Overcompensating Motor Structure for Increased Magnetic Strength 12mm T-Yoke & Top Plate Improve Low Frequency Harmonics Vented T-Yoke & Frame Reduces Voice Coil Heat Build-up Non-Magnetic Non-Resonate Die-Cast Aluminum Frame 3” 4-Layer Voice Coil w/ Spring Loaded Wire Terminals High-Temperature Tolerance Adhesives Resist Thermal Failure Non-Transfer Spruce Pulp Cone w/ UV & Chemical Protection Stitched and Glued Surround/Cone Joints for Strongest Bonding Extended Excursion Poly-ether Foam Surround w/ UV Protection Dual Poly-Cotton Suspension Dampen Violent Accelerations 1-pc Gasket/Trim Ring w/ Concealed Mounting Holes Included

Vehicle conditions, amplifier, music preferences, & other variables make it difficult to give you exact dimensions for an enclosure deisgn. For enclosure
designs tailored to your specific needs, please contact us at tech-support@ soundstream.com, or 1-800-724-1377. All enclosures should be made of .75” (3/4”) material only. When possible, make the baffle 1.5” (1 ½) thick and add .75” (3/4”) to the depth of the enclosure to compensate. All volumes INCLUDE vent/port and subwoofer displacements. DO NOT change the volume unless you plan on adding a substantial amount DO NOT change the volume unless you plan on adding a substantial amount
of bracing. For added performance, applying a coat of fiberglass resin to the interior walls will greatly improve sealing the enclosure. Adding a thin layer of poly-fill will improve response by smoothing out reflections within the enclosure. Below are recommended enclsoure designs and their expected performance:

RSW.12

RSW.15

DIMENSIONS