1.3-inch Smart Heart Rate and Blood Pressure Bracelet

User Guide

Instructions for Quick Use of Bracelet

An Introduction to Components

Charge Mode

For the first time, please take out the bracelet and charge the device with the corresponding charger. (The charging method is as illustrated in the following figure: put the bracelet into the charger; aim it at two contacts of the charger, and cover the charger to charge. The charging voltage is 5V. )

Way to wear

1. It is preferable to wear the bracelet behind the ulnar styloid process;
2. Adjust the size suitable for the wrist according to the regulation hole and buckle the wrist strap;
3. Keep the sensor close to the skin to avoid movement.

Switch on / off

1. When the bracelet is power off, charge it or press the function button for 3 seconds to start up the bracelet with shake;
2. When the bracelet is turned on, switch to the POWER OFF interface and press the function button for 3 seconds to shut down the bracelet with shake.

Bracelet Operation

1. When the bracelet is on, quickly touch the function key to light up the screen or switch the menu;
2. The screen will be off after 5 seconds without operations by default. The user can connect it to the phone APP to modify the screen off time;
3. The call and message reminder of the bracelet is open by default. The user can close it in the APP;
4. Switch it on or off in the main interface of (Android)/ Smart Play (IOS).

To install Bracelet APP

Scan the following QR code or enter the application markets to download and install it.“FlagFit2.0”

Device Requirements: IOS 8.0 and above versions; Android 4.4 and above versions; Support Bluetooth 5.0.

Device attachment

When being used for the first time, it is necessary to connect APP for alignment. After successful connection, wristband will self-synchronize time, or otherwise, step calculation and sleep data won’t be accurate.

Bluetooth connection: After successfully matching, APP will automatically save the wristband bluebooth address. When APP is opened or operated in background, it will automatically search and link with the wristband.

Data Synchronism: manually pull down the synchronization data on the APP home page; the bracelet can store off-line data for 7 days, the more data, the longer the synchronization time is, and the longest time is about 2 minutes.

APP Functions and Settings

Personal Information and Sport Target

Please set the personal information after entering the APP.

My – Click the avatar – Avatar change/Background change/Cancel

My – Click the avatar – Avatar

change/Background change/Cancel

• Personal settings-Sex-Age-Height-Weight, distance unit.
• Set personal daily sport target. Reasonable sports planning is conducive to the improvement of physical fitness.

Reminder Function

The reminder switch should be switched on the“Play Bar”page in the APP and keep the Bluetooth of the phone connected with the bracelet. It will shake if there’s a message.

Call Reminder: When there is an incoming call, the bracelet shakes and displays the name or phone number of the caller. If the “Call Reject”is enabled on the APP, press and hold the function button for 3 seconds to reject the call.

Message Reminder: When receiving messages, the bracelet shakes and displays icon reminder. Click to view the message content.

QQ Reminder: When receiving QQ messages, the bracelet shakes and displays icons. Click to view the QQ content.

WeChat Reminder: When receiving WeChat messages, the bracelet shakes and displays icon reminder. Click to view the WeChat content. Smart Alarm: A total of 3 alarms can be set, which, after being set, can be synchronized to the bracelet . Smart alarm is a silent alarm clock. When alarming, the bracelet shakes moderately and supports offline alarm reminder.

Sedentariness Reminder: The reminder interval is one hour by default. Under the connection state, if the user does not exercise within an hour, the bracelet will shake to remind the user to exercise.

Charge Reminder: When the bracelet is connected to the power supply or charging clip, the motor will shake. Please note that the bracelet will not shake when the power is low or full.

Sleep Detection

When you fall asleep, the bracelet will automatically judge and enter the sleep monitoring mode, automatically detect the duration of your time of deep sleep/light sleep/wakefulness all night, and calculate your sleep quality. For the time being, sleep data can only be viewed on the APP. Attention: There is sleep data only when you go to sleep wearing the bracelet.

Main Functions

Main Interface

The bracelet has 3 main interfaces. Press and hold the main interface to switch the interface. After the APP is firstly matched and connected successfully, the bracelet will sync the phone’s time, date and day of the week.

Notifications

Press and hold the touch button for 3 seconds to check the historical information; If there’s no historical information, it will be empty.

1.3-inch, large font, multi-display content, convenient check.

State

Switch to this interface to view the states of current steps, distances and calories. Distances and calories will be calculated and displayed according to the current step number, the height and weight set by the APP.

Notes for heart rate monitoring:

• The heart rate LED light behind the bracelet will be on when measuring.
• The sensor should be close to the skin to prevent external light from affecting the accuracy of the measurement;

Measuring area should be kept clean, because sweat or stains will affect the measurement results

Weather

Press and hold for 3 seconds to switch to the detailed weather page. You can check the weather and temperature here.

Heart Rate

Switch to the heart rate interface. Start to measure the heart rate automatically. Switch the menu to measure again.

Stopwatch

On the stopwatch interface, short press start/pause. Press and hold for 3 seconds to reset and then press and hold for 3 seconds again to exit.

Training

Switch to this interface. Press and hold for 3 seconds to enter the specific sport page including 7 sorts of rope skipping, swimming, riding, table tennis, tennis, badminton and running. Click to switch the specific sport page. Press and hold for 3 seconds to exit the sport interface.

Press and hold the specific sport page for 3 seconds to start the corresponding sport and enter the detailed sport page. Press and hold for 3 seconds to finish the current sport and go back to the specific sport page.

Blood Pressure

Switch to the blood pressure interface. Start to measure the blood pressure automatically. Switch the menu to measure again.

Blood Oxygen

Switch to the blood oxygen interface. Wait for 10 seconds to measure the blood oxygen value automatically. Switch the menu to measure again.

Information

On the information interface, press and hold for 3 seconds to check the information. Click to turn the page. Exit after checking the information or press and hold 3 seconds to exit.

Settings

Press and hold other function interfaces for 3 seconds, and enter the submenu interface for more operations.

Version Information: Press and hold the interface to check the firmware version number and Bluetooth address of the bracelet.

Brilliance Control: Press and hold to choose different brilliance. There are 4 levels of brilliance.

Phone Search: Under the connection, press and hold the phone search interface to make the phone ring.

Restore Settings: Press and hold for 3 seconds in the interface to clear all the data in the bracelet, and the data in the APP will be cleared on that day (other historical data will be retained).

Power Off : Press and hold for 3 seconds in the interface to switch off. The phone will shake at the same time (if the phone is in low power, it won’t shake.)

Matters needing attention

Please avoid strong impact, extreme heat and exposure to the wristband.

Please do not disassemble, repair or transform the machine on its own.

• This machine is charged with 5V 500MA, and it is strictly forbidden to use overvoltage load power.
• The use of the environment is 0 degrees ~45 degrees, and it is forbidden to hrow it into the fire so as not to cause an explosion.
• Please wipe the water, the wristband can be used only for the charging operation with a soft cloth, otherwise it will cause corrosion of charging contact point, charging fault.
• Do not touch the chemical substances such as gasoline, clean solvent, propanol, alcohol or insect repellent.
• Please do not use this product in high pressure and high magnetic environment.
• If you have sensitive skin skin or tighten the wristband, you may feel discomfort.
• Please dry the sweat drips on the wrist in time. The strap has long contact with soap, sweat, allergies or pollution ingredients, which may cause skin allergy itching.
• If it is often used, it is recommended to clean the wristband every week. Wipe with wet cloth and remove oil or dust with mild soap. It is not appropriate to wear a hot bath with a wristband.

Common problems

Why is the first test of heart rate too long?

To test your heart rate, you need to take a long time signal to accurately calculate your heart rate.

What do Bluetooth connections do? (connection / reconnection failure or connection speed is slow)

Confirm whether your device is 4.4 or more versions of IOS8.0 and Android system and support Bluetooth 4.

a. Because of the problem of signal interference in Bluetooth wireless connection, there may be no time to connect each other. If the connection is not long enough, please ensure that the operation is carried out without magnetic field or without multi Bluetooth device interference.

b. Turn off Bluetooth and open.

c. Turn off the mobile phone background application or restart the mobile phone. Mobile phones do not connect to other Bluetooth devices or functions at the same time.

e. APP is running normally in the background and may not be connected if it is not in the background.

Can’t search the wristband?

Since the wristband is not searched by phone in Bluetooth broadcast, make sure the wristband is in power and activated and is not connected to any other phones. Then, put the wristband close to the phone, if it is still invalid, turn off the phone, and after about 20 seconds, restart the phone Bluetooth.

Why the wristband should be worn more tightly when measuring heart rate?

The wristband uses light reflection principle, penetrates the skin through the light source, and collects the signal reflected to the sensor, to calculate your heart rate. If you don’t wear it tightly, there will be ambient light reaching into the sensor, which will affect measurement accuracy.

Why not remind when opening the reminder function?

Android phone: confirm that the phone and the wristband are connected, and open the corresponding permissions in the phone settings, allowing the ” FlagFit2.0″ APP access calls, messages and address book, and keeping ” FlagFit2.0″ running in the background; if the phone is installed with security software, add ” GloryFit” to “trust”.

Iphone: If there is no reminder after the connection, it is recommended to restart the phone to reconnect, when reconnecting the wristband again, there will be reminder after popping up “Bluetooth pairing request” and clicking “Pairing”.

Is the wristband waterproof?

It supports IP67 waterproof and dust-proof level (IP67 standard is 35 degrees below water, 1 meters below 30 minutes). Usually, wash hands, rain, cold water shower, wash car can be worn with heart.

Does the Bluetooth connection need to be open all the time? Is there any data after disconnection?

Before the data is synchronized, the data is kept on the wristband host (seven days of data can be retained). When the Bluetooth connection of the wristband and the wristband is successful, the wristband data will be automatically uploaded to the mobile terminal. Please synchronize the data to the mobile terminal in time.

Note: if the caller and SMS alerts are opened, you must keep the Bluetooth connection, and the alarm is offline.

Basic parameter

Happy Sports T70 Smartwatch Manual

1. Wristband App Installation

Search for “Happy Sports” in the Android App store or Apple App Store, or scan QR Code of the right side to download and install the app,
Apple device support system for iOS 8.0 and above version of iPhone 4S;
Android device compatible system is Android 4.4 and above, and supports mainstream Android smartphones above Bluetooth 4.0.

Note:
If the smart wristband does not connect to the phone, delete the “Happy sports” App on the phone and then download the App from Google or Android Store, and follow the above steps to set up the phone and smart wristband.

2. The appearance description

3. Assembly and wear

a. Taking out the wristband, adjust the size of the wrist according to the adjustment hole, and buckle the wrist strap buckle;
b. The sensor should be close to the skin to avoid movement, so as to accurately detect the heart rate of the wristband;
c. Raising your hand or turning your wrist to light screen

4. Connection Binding

1. After downloading and registering the APP, turn on the mobile Bluetooth, open the device management interface in the APP, and click “bind management” >> “bind new device”. Waiting for Bluetooth to search for Bluetooth address of wristband shutdown page. Click on the Bluetooth address of the wristband on your mobile phone and you can bind the wristband.
   
2. The open the Happy Sports app in your phone, click “Connect Device” select “Binding Management” and display “Binding Information”.
   
3. Please select the code above the T70 smart wristband shutdown page, such as “T70A7C0” (this code is the same as the code displayed on your phone), and then click the code “T70A7C0” on the phone’s APP interface.
4. Finally, Please click “Pairing” and the binding is successful, as shown below
   
   Note that please quickly press the wristband at the same time (otherwise the binding fails)

Note:
If the smart wristband does not connect to the phone, delete the “Happy sports” App on the phone and then download the App from Google or Android Store, and follow the above steps to set up the phone and smart wristband.

5. Permissions setting of Android system

Note: you need to give permission to the application on the mobile APP if you use android, which can be fully use.

1. Click on the main interface (Settings Management), and then click (Permissions Management).
2. Separately enter (apply permissions)-(notify right to use)-(apply protection lock) turn on all permissions.
   

6. Operation

a. You need to press the touch button to start up the wristband for a long time when you use wristband for the first time;
b. Click the touchpad to switch button in heartrate, photo-taking, multi-motion mode interface to activate related functions.

7. Charge

1. Please use the magnetic suction charger equipped with the product to aim at the contact on the back of he subject for charging.
2. The USB tap is inserted into the USB adapter (the adapter is not included in the wrapper).
   

8. Function and Display

9. Detailed introduction to Motion Mode

Note: Because each motion mode counts differently, please do the relative sporting state for accurate accounting.

10. Basic Parameters

Standby power consumption: about 30 days standby, 10 days for normal use

Bluetooth type: Bluetooth 4.2
Font push category: multi-language font
APP support: Happy sports
Charging voltage: 5.0v
Charging current: 75MA
Language support of wristband information: Simplified Chinese, traditional Chinese, English, Japanese, Korean, Spanish, German, Italian, Fremch, Greek, Turkish, Russian, Dutch, Portuguese
Mobile system requirements: support system for iOS 8.0 and above version of iPhone 4S/5/5S/5C/6/6 Plus36S/6S Plus/SE/7/7 Plus;
It is compatible with Android 4.4 and above and supports Android smart phones with bluetooth 4.0
Exercise record: count step, exercise time, exrcise mileage, calorie consumption, sleep monitoring, save 30 days of exercise.
Multi-sport Mode: running, riding, walking, fitness
Health monitoring: real-time heart rate measurement (dynamic, static)
Smart reminder: custom alarm clock to remind, sedentary remind, Call remind, call reject, information push (SMS/QQ/WeChat/Skype/Facebook/TwitterLine/WhatsApp), loss-proof remind.
Other functions: turn the wrist to bright screen, one-click physical examination, time display, remote control to take pictures, do not disturb mode setting, find wristband, WeChat sporting, switching horizontal and vertical screen display, customize home page style, wristband to reject calls, support App air upgrade.