Shark – UseManuals

Shark NV355 Series Navigator Lift-Away Professional Upright Vacuum Cleaner Manual

ItsManual — Wed, 28 Jun 2023 06:13:41 +0000

Shark NV355 Series Navigator Lift-Away Professional Upright Vacuum Cleaner Owner’s Manual

IMPORTANT SAFETY INSTRUCTIONS

FOR HOUSEHOLD USE ONLY

WARNING

To reduce the risk of fire, electric shock, injury, or property damage, when using an electrical appliance, basic precautions should always be followed, including the following:

READ ALL INSTRUCTIONS BEFORE USING THIS VACUUM

Inspect power cord and plug for any damage before use. DO NOT use vacuum cleaner with a damaged cord or plug. Turn off all controls before plugging in or unplugging the vacuum cleaner. Store your vacuum cleaner with the power cord secured around the two cord hooks. To minimize the risk of power cord damage, do not allow the motorized brush roll to ingest the cord. If this occurs, immediately shut off power to the vacuum and remove the cord.
This appliance has a polarized plug, if the plug does not fit fully into the outlet, reverse the plug (one blade is wider than the other). If it still does not fit, contact a qualified electrician. DO NOT force into outlet or try to modify to fit.
Your vacuum cleaner may consist of a motorized nozzle, wand, hose, and/ or vacuum pod. This device contains electrical connections, electrical wiring, and moving parts that potentially present risk to the user.
Use only identical replacement parts.
Carefully observe and follow the instructions provided below to avoid improper use of the appliance. DO NOT use the vacuum for any purpose other than those described in this manual.
Before use, carefully inspect all parts for any damage. DO NOT use if any parts are damaged.
The use of an extension cord is NOT recommended.
This vacuum cleaner contains no serviceable parts.
This appliance can be used by persons with reduced physical, sensory or mental capabilities or lack of experience and knowledge if they have been given supervision or instruction concerning use of the appliance in a safe way and understand the hazards involved. Cleaning and user maintenance shall not be made by children. Keep the appliance and its cord out of reach of children. DO NOT allow the appliance to be used by children. DO NOT allow to be used as a toy. Close supervision is necessary when used near children.
Always turn off the vacuum cleaner before connecting or disconnecting any motorized nozzles or other accessories.
DO NOT handle plug or vacuum cleaner with wet hands.
DO NOT use without filters in place.
Only use Shark® branded filters and accessories.
DO NOT damage the power cord:
1. DO NOT pull or carry vacuum cleaner by the cord or use the cord as a handle.
2. DO NOT unplug by pulling on cord. Grasp the plug, not the cord.
3. DO NOT run the vacuum cleaner over the power cord, close a door on the cord, pull the cord around sharp corners, or leave the cord near heated surfaces.
DO NOT put any objects into nozzle or accessory openings. DO NOT use with any opening blocked; keep free of dust, lint, hair, and anything that may reduce airflow.
DO NOT use if nozzle or accessory airflow is restricted. If the air paths or the motorized floor nozzle become blocked, turn the vacuum cleaner off and unplug from electrical outlet. Remove all obstructions before you plug in and turn on the unit again.
Keep nozzle and all vacuum openings away from hair, face, fingers, uncovered feet, or loose clothing.
DO NOT use if vacuum cleaner is not working as it should, or has been dropped, damaged, left outdoors, or dropped into water.
Use extra care when cleaning on stairs.
DO NOT leave the vacuum cleaner unattended while plugged in.
When powered on, keep the vacuum cleaner moving over the carpet surface at all times to avoid damaging the carpet fibers.
DO NOT place vacuum cleaner on unstable surfaces such as chairs or tables.
Your Shark® vacuum may not be designed to stand up on its own. When taking a break from cleaning, you may need to lean it against furniture or a wall, or lay it flat on the floor. Using the vacuum for an application where the unit lacks stability may result in personal injury.
DO NOT use to pick up:
1. Liquids
2. Large objects
3. Hard or sharp objects (glass, nails, screws, or coins)
4. Large quantities of dust (drywall dust, fireplace ash, or embers). DO NOT use as an attachment to power tools for dust collection.
5. Smoking or burning objects (hot coals, cigarette butts, or matches)
6. Flammable or combustible materials (lighter fluid, gasoline, or kerosene)
7. Toxic materials (chlorine bleach, ammonia, or drain cleaner)
DO NOT use in the following areas:
1. Poorly lit areas
2. Wet or damp surfaces
3. Outdoor areas
4. Spaces that are enclosed and may contain explosive or toxic fumes or vapors (lighter fluid, gasoline, kerosene, paint, paint thinners, mothproofing substances, or flammable dust)
Turn off all controls before plugging in or unplugging the vacuum.
Unplug from electrical outlet when not in use and before any maintenance or cleaning.
Hand wash with water only. Washing with cleaning chemicals could damage the unit.
During cleaning or routine maintenance, DO NOT cut anything other than hair, fibers, or string wrapped around the brushroll.
Allow all filters to air-dry completely before replacing in the vacuum to prevent liquid from being drawn into electric parts.
Make sure the dust cup and all filters are in place after routine maintenance.
If provided, secure the power cord around the two cord hooks during storage.

SAVE THESE INSTRUCTIONS

ASSEMBLY

Place the Pod onto the Floor Nozzle Post.
Insert the Wand into the pod.
Attach the Lower Accessory Holder to the pod.
Insert the Handle into the wand.
Connect the Hose to the back of the pod.
Store Accessories on the Tool Storage Posts.

For proper operation, ensure all parts are firmly clicked into place.

WHOLE-HOME CLEANING

SETTINGS

Press the Power/Surface Switch at the top of the pod.

Select surface setting:
- O Off
- I Hard Floor
  For hard floors and small area rugs.
- II Carpet
  For carpets.
  NOTE: Brushroll spins in Carpet mode only.
Rotate the Suction Control Slider on the handle to adjust the suction depending on the floor type.
- MIN: to reduce suction and increase maneuverability on carpets.
- MAX: to increase suction on hard floors.

BRUSHROLL INDICATOR LIGHT

WHAT DOES THE BRUSHROLL INDICATOR LIGHT MEAN?

Solid Green: The brushroll is spinning and working as intended.

Solid Red: There is a jam in the brushroll area. Turn off the vacuum and unplug it, then remove any blockages in the nozzle.

Flashing Red: The motorized floor nozzle is overheating. Turn off the vacuum, unplug it, and remove any blockages. Let the vacuum cool down for at least 60 minutes before restarting. See Troubleshooting section for more information.

NOTE: For deep carpet cleaning per ASTM F608 (embedded dirt in carpets), use setting II, Carpet.

CLEANING MODES

To engage brushroll, select Carpet mode, then step on floor nozzle and tilt handle back.
Press the red Release Button on the side of the pod. Step on the floor nozzle and lift off the pod.
With pod removed, press the Wand Release button to detach the wand from the pod. Attach an accessory to the end of the wand.
With pod removed, press the Handle Release button to detach the handle from the wand. Attach an accessory to the end of the handle.

NOTE: All accessories are compatible with both the wand and the handle.

EMPTYING THE DUST CUP

IMPORTANT: Unplug the power cord before performing any maintenance. Empty the dust cup each time you vacuum and periodically during cleaning, when debris in the dust cup reaches the MAX fill line.

Undo the Latches on the sides of the dust cup by lifting them up and out. Tilt the dust cup and lift it off vacuum pod.
To empty debris into trash, press the lower release button and the bottom lid will drop open.
To remove collected debris from Lint Screen, press the top release button and lift the handle to open. Gently brush lint screen to clean.
To reinstall, set the bottom of the dust cup and tilt until dust cup clicks into place.

CLEANING AND REPLACING THE FILTERS

CLEANING FILTERS

Regularly rinse and replace the filters to maintain your vacuum’s suction power.

To prevent damage from cleaning chemicals, rinse filters with cold water ONLY. Allow all filters to air-dry for at least 24 hours before reinstalling them to prevent liquid from being drawn into electric parts.

IMPORTANT: DO NOT use soap when cleaning the filters.

Pre-Motor (foam and felt): With the dust cup removed, remove the Foam and Felt Filters.
CLEAN PRE-MOTOR FILTERS EVERY 3 MONTHS.
Post-Motor (HEPA): To access the HEPA filter, press the tab, tilt the Filter Cover, and lift it from the vacuum. Remove the HEPA filter.
CLEAN HEPA FILTER EVERY YEAR.

CORD MAINTENANCE

DO NOT pull or carry vacuum cleaner by the cord or use cord as a handle.
DO NOT unplug by pulling on the cord. Grasp the plug, not the cord.
DO NOT close the door on the cord.
DO NOT pull the cord around sharp corners.
DO NOT leave the cord near heated surfaces.

To minimize the risk of power cord damage, DO NOT run the vacuum over the power cord. If this occurs, immediately shut off power to the vacuum and remove the cord from the brushroll or nozzle.

MAINTENANCE

CLEANING THE BRUSHROLL

Detach the pod from the floor nozzle.
Remove any blockages or buildup from the airways in the nozzle. With scissors, carefully cut away any fibers, hair, or string wrapped around the brushroll. Avoid damaging or cutting the bristles.

REPLACING FILTERS

Follow the previous instructions for removing filters. The Pre-Motor Filter should be replaced every 2.5 years. The HEPA Filter should be replaced every 3 years.

Replacement Pre-Motor Foam & Felt Filter Kit XFF350.
Replacement HEPA Filter XHF350.

NOTE: To order replacement parts and filters, visit sharkaccessories.com.

CHECKING FOR BLOCKAGES

Detach the handle from the wand by pressing the handle release button. Remove the hose from the pod by pressing the tabs on the hose collar. Inspect the hose for clogs.
Detach the pod, wand, hose, and dust cup. Check all openings and remove blockages.
With the pod detached, remove the lower nozzle hose and check for clogs.
Open the airway on the bottom of the floor nozzle by squeezing the tabs on the sides and lifting up. Check for clogs and clear away any obstructions.

AVAILABLE ACCESSORIES

A Crevice Tool
This slim crevice tool is great for cleaning tight spaces, between couch cushions, and in hard-to-reach areas.
B Dusting Brush
This brush dusts and cleans delicate surfaces. Great for use on fans, blinds, lampshades, and keyboards.
C Wide Upholstery Tool
This wide cleaning path helps remove pet hair, dust, and large debris from mattresses, couches, curtains, lampshades, and other delicate upholstered fabrics.
D Upholstery Tool
Picks up pet hair, dust, and large debris from mattresses, couches, curtains, and other delicate upholstered fabrics.
E Anti-Allergen Dust Brush
This brush features nylon fiber bristles specifically designed for removing fine dust and allergen particles from the most delicate surfaces.
F Pet Power Brush
The turbine brush loosens and removes pet hair and debris from carpets, and powerfully deepcleans dander out of upholstery and other surfaces.
G Under-Appliance Wand
Clean under and behind hard-to-move appliances and furniture with this adjustable 36” tool. Flip the extension piece over to clean the underside of appliances.
H Large Accessory Bag
This convenient accessory storage bag measures 32 cm x 70 cm and fits the Under-Appliance Wand. Smaller size available at sharkaccessories.com.

FIVE (5) YEAR LIMITED WARRANTY

The Five (5) Year Limited Warranty applies to purchases made from authorized retailers of SharkNinja Operating LLC. Warranty coverage applies to the original owner and to the original product only and is not transferable.

SharkNinja warrants that the unit shall be free from defects in material and workmanship for a period of five (5) years from the date of purchase when it is used under normal household conditions and maintained according to the requirements outlined in the Owner’s Guide, subject to the following conditions and exclusions:

What is covered by this warranty?

The original unit and/or non-wearable parts deemed defective, in SharkNinja’s sole discretion, will be repaired or replaced up to five (5) years from the original purchase date.
In the event a replacement unit is issued, the warranty coverage ends six (6) months following the receipt date of the replacement unit or the remainder of the existing warranty, whichever is later. SharkNinja reserves the right to replace the unit with one of equal or greater value.

What is not covered by this warranty?

Normal wear and tear of wearable parts (such as foam filters, HEPA filters, pads, etc.), which require regular maintenance and/or replacement to ensure the proper functioning of your unit, are not covered by this warranty. Replacement parts are available for purchase at sharkaccessories.com.
Any unit that has been tampered with or used for commercial purposes.
Damage caused by misuse (e.g., vacuuming up water or other liquids), abuse, negligent handling, failure to perform required maintenance (e.g., not cleaning the filters), or damage due to mishandling in transit.
Consequential and incidental damages.
Defects caused by repair persons not authorized by SharkNinja. These defects include damages caused in the process of shipping, altering, or repairing the SharkNinja product (or any of its parts) when the repair is performed by a repair person not authorized by SharkNinja.
Products purchased, used, or operated outside North America.

How to get service

If your appliance fails to operate properly while in use under normal household conditions within the warranty period, visit sharkclean.com/support for product care and maintenance self help. Our Customer Service Specialists are also available at 1-800-798-7398 to assist with product support and warranty service options, including the possibility of upgrading to our VIP warranty service options for select product categories. So we may better assist you, please register your product online at registeryourshark.com and have the product on hand when you call.

SharkNinja will cover the cost for the customer to send in the unit to us for repair or replacement. A fee of $24.95 (subject to change) will be charged when SharkNinja ships the repaired or replacement unit.

How to initiate a warranty claim

You must call 1-800-798-7398 to initiate a warranty claim. You will need the receipt as proof of purchase. We also ask that you register your product online at registeryourshark.com and have the product on hand when you call, so we may better assist you. A Customer Service Specialist will provide you with return and packing instruction information.

How state law applies

This warranty gives you specific legal rights, and you also may have other rights that vary from state to state. Some states do not permit the exclusion or limitation of incidental or consequential damages, so the above may not apply to you.

TROUBLESHOOTING

Power cord caught in brushroll or floor nozzle.

To minimize the risk of power cord damage, DO NOT run the vacuum over the power cord. If this occurs, immediately shut off power to the vacuum and remove the cord from the brushroll or nozzle.
Inspect power cord and plug for any damage before use. DO NOT use vacuum cleaner with a damaged cord or plug. Turn off all controls before plugging in or unplugging the vacuum cleaner. Store your vacuum cleaner with the power cord secured around the two cord hooks.

Vacuum is not picking up debris. No suction or light suction.

Check filters to see if they need cleaning. Follow instructions for rinsing and air-drying the filters before reinstalling.
Dust cup may be full; empty dust cup.
Clear any blockages in the hose, hose connections, nozzle, wand, pod, or accessories. See Checking for Blockages section for more information.
If any string, hair, or carpet fibers are wrapped around the brushroll, carefully cut debris with scissors and remove from brushroll. See Nozzle Maintenance section for more information.

Vacuum lifts area rugs.

Make sure Power/Surface switch is set to Hard Floor (setting I).
Suction is powerful. Take care when vacuuming area rugs or rugs with delicately sewn edges.
To minimize suction, set the suction control slider to MIN. See the Suction Control section for more information.

Brushroll does not spin.

If the brushroll indicator light turns red, immediately turn off and unplug the vacuum. Remove pod from floor nozzle and clear any blockages. Reconnect nozzle, plug in vacuum, and turn on power.
With the power on, recline the handle, which will automatically turn on the brushroll.

Vacuum turns off on its own or indicator light flashes red.

If your vacuum overheats, the thermostat will automatically turn off the motor. Follow these steps to restart:

Turn vacuum off and unplug it.
Empty dust cup and clean filters (see Emptying the Dust Cup and Cleaning Filters).
Check for blockages in hose, wand, nozzle, accessories, and inlet openings.
Allow unit to cool for a minimum of 60 minutes.
Plug in vacuum and turn it on.

REGISTER YOUR PURCHASE

registeryourshark.com
Scan QR code using mobile device.

RECORD THIS INFORMATION

Model Number: _____________________________________
Serial Number: ______________________________________
Date of Purchase (Keep receipt): ________________________
Store of Purchase: ___________________________________

TECHNICAL SPECIFICATIONS

Voltage: 120V~ 60Hz
Watts: 1200W

Benefits of registering your product and creating an account:

Get easier, faster product support and access to warranty information
Access troubleshooting and product care instructions
Be among the first to know about exclusive product promotions.

TIP: You can find the model and serial numbers on the QR code label on the bottom of the back of the vacuum pod.

PLEASE READ CAREFULLY AND KEEP FOR FUTURE REFERENCE.
This Owner’s Guide is designed to help you get a complete understanding of your new Shark Navigator® Lift-Away® Professional.

SharkNinja Operating LLC
US: Needham, MA 02494
CAN: Ville St-Laurent, QC H4S 1A7
1-800-798-7398
sharkclean.com

Illustrations may differ from actual product. We are constantly striving to improve our products; therefore the specifications contained herein are subject to change without notice.

For SharkNinja U.S. Patent information, visit sharkninja.com/uspatents

NV355_IB_E_MP_Mv9
PRINTED IN CHINA

@sharkcleaning

Shark DuoClean Powered Lift-Away NZ850UK Upright Vacuum Manual

ItsManual — Tue, 04 Apr 2023 09:51:47 +0000

DuoClean
Powered Lift-Away with Anti Hair Wrap Brush-Roll
Upright Vacuum

NZ850UK Series
INSTRUCTIONS

THANK YOU
for purchasing the Shark® DuoClean® Powered Lift-Away® with Anti Hair Wrap Brush-Roll Upright Vacuum

REGISTER YOUR PURCHASE
TO BENEFIT FROM YOUR PRODUCT’S EXTENDED GUARANTEE, SIMPLY REGISTER YOUR PURCHASE AT:
sharkclean.co.uk/register-guarantee
0800 862 0453
Scan QR code using a mobile device
Please note, products purchased directly from Shark are automatically registered.
Benefits of registering your product and creating an account:

Get easier, faster product support and access to guarantee the information
Access troubleshooting and product care instructions
Be among the first to know about exclusive product promotions

RECORD THIS INFORMATION
Model Number:——————————
Serial Number——————————–
Date Code: ————————————
Date of Purchase (Keep receipt): ———
Store of Purchase: ————————–
TECHNICAL SPECIFICATIONS
Voltage:220-240V~, 50-60Hz
Watts: 800W
PLEASE READ CAREFULLY AND KEEP FOR FUTURE REFERENCE
This instruction manual is designed to help you get a complete understanding of your new Shark DuoClean Powered Lift-Away with Anti Hair Wrap Brush-Roll Upright Vacuum If you have any questions, please call the customer service line on 0800 862 0453 This marking indicates that this product should not be disposed of with other household wastes throughout the UK. To prevent possible harm to the environment or human health from uncontrolled waste disposal, recycle it responsibly to promote the sustainable reuse of material sources. To return your used device, please use the return and collection systems or contact the retailer where this product was purchased. They can take this product for environmentally safe recycling.

IMPORTANT SAFETY INSTRUCTIONS

FOR HOUSEHOLD USE ONLY • PLEASE READ ALL INSTRUCTIONS BEFORE USING THIS VACUUM

IF YOU HAVE DELICATE OR WOOL CARPETS, PARTICULARLY LOOP PILES, PLEASE TRY THE VACUUM ON A HIDDEN AREA FIRST TO ENSURE THE SPINNING BRUSH-ROLLS DO NOT DAMAGE OR UNPICK CARPET FIBRES

WARNING
REDUCE THE RISK OF FIRE, ELECTRIC SHOCK, INJURY, OR PROPERTY DAMAGE:

WARNING: Children should be supervised to ensure that they do not play with the appliance.

GENERAL WARNINGS

Inspect power cord and plug for any damage before use. DO NOT use a vacuum cleaner with a damaged cord or plug. Turn off all controls before plugging in or unplugging the vacuum cleaner. Store your vacuum cleaner with the power cord secured around the two cord hooks. To minimize the risk of power cord damage, do not allow the motorized brush-roll to ingest the cord. If this occurs, immediately shut off the power to the vacuum and remove the cord.
Your vacuum cleaner consists of a motorized nozzle, wand, hose, and/ or vacuum pod. This device contains electrical connections, electrical wiring, and moving parts that potentially present risks to the user.
Use only identical replacement parts.
Carefully observe and follow the instructions provided below to avoid improper use of the appliance. DO NOT use the vacuum for any purpose other than those described in his manual.
Before use, carefully inspect all parts for any damage. DO NOT use if any parts are damaged.
The use of an extension cord is NOT recommended.
CAUTION: This vacuum cleaner contains electrical connections. This vacuum contains no serviceable parts.
USE WARNINGS
This appliance can be used by persons with reduced physical, sensory or mental capabilities or lack of experience and knowledge if they have been given supervision or instruction concerning the use of the appliance in a safe way and understand the hazards involved.
DO NOT allow the appliance to be used by children. Keep the appliance and its cord out of reach of children. Do not allow to be used as a toy. Close supervision is necessary when used near children.
CLEANING AND USE
Always turn of the vacuum cleaner before connecting or disconnecting any motorized nozzles or other accessories.
DO NOT handle plug or vacuum cleanerwith wet hands.
DO NOT use without filters in place.
Only use Shark branded filters and accessories. Damage caused by the use of non-Shark parts may not be covered by your guarantee.
DO NOT damage the power cord:
a)DO NOT pull or carry a vacuum cleaner by the cord or use the cord as a handle.
b)DO NOT unplug by pulling on the cord. Grasp the plug, not the cord.
c) DO NOT run the vacuum cleaner over the power cord, close a door on the cord, pull the cord around sharp corners, or leave the cord near heated surfaces
DO NOT put any objects into nozzle or accessory openings. DO NOT use with any opening blocked; keep free of dust, lint, hair, and anything that may reduce airflow.
16 DO NOT use if nozzle or accessory airflow is restricted. If the air paths or the motorized floor nozzle become blocked, turn the vacuum cleaner off and unplug from the electrical socket. Remove all obstructions before you plug in and turn on the unit again.
Keep nozzle and all vacuum openings away from hair, face, fingers, uncovered feet, or loose clothing.
DO NOT use if the vacuum cleaner is not working as it should, or has been dropped, damaged, left outdoors, or dropped into water.
If the supply cord is damaged, it must be replaced by the manufacturer, its service agent, or similarly qualified persons in order to avoid a hazard.
Use extra care when cleaning on stairs.
DO NOT leave the vacuum cleaner unattended while plugged in.
22When powered on, keep the vacuum cleaner in moving over the carpet surface at all times to avoid damaging the carpet fibers.
DO NOT place vacuum cleaners on unstable surfaces such as chairs or tables.
DO NOT use to pick up:
a)Liquids
b) Large objects
c)Hard or sharp objects (glass, nails, screws, or coins)
d) Large quantities of dust (drywall dust, fireplace ash, or embers). DO NOT use as an attachment to power tools for dust collection.
e) Smoking or burning objects (hot coals, cigarette butts, or matches)
f) Flammable or combustible materials (lighter fluid, petrol, or kerosene)
g) Toxic materials (chlorine bleach, ammonia, or drain cleaner)
DO NOT use in the following areas:
a) Poorly lit areas
b) Wet or damp surfaces
c) Outdoor areas
d) Spaces that are enclosed and may contain explosive or toxic fumes or vapors (lighter fluid, petrol, kerosene, paint, paint thinners, mothproofing substances, or flammable dust) Turn off all controls before plugging in or unplugging the vacuum.
Unplug from the electrical socket when not in use and before any maintenance or cleaning.
To clean: wipe down the unit with water only. Washing with cleaning chemicals could damage the unit.
During cleaning or routine maintenance, DO NOT cut anything other than hair, fibers, or string wrapped around the brush-roll.
Allow all filters to air-dry completely before replacing in the vacuum to prevent liquid from being drawn into electrical parts.
Make sure the dust cap and all filters are in place after routine maintenance.
Secure the power cord around the two cord hooks during storage.

SAVE THESE INSTRUCTIONS

GETTING TO KNOW YOUR SHARK ® DUO CLEAN ® POWEREDLIFT-AWAY ® WITH ANTI-HAIR WRAP BRUSH-ROLL UPRIGHT VACUUM

WELCOME!
Congratulations on your purchase. Use this instruction manual to learn about your new vacuum’s great features. From assembly to use to maintenance, you will find it all in here.

MAIN UNIT

A. Power Switch
B. Handle Release Button
C. Surface Selector
D. Hose Clip
E. Hose
F. Upper Cord Hook
G. Powered Lift-Away® Button
H. Wand Release Button
I. Lift-Away® Pod
J. Dust Cup Release Button
K. Dust Cup Empty Latch
L. Wand

M. Lower Cord Hook
N. Motorised Floor Nozzle
O. Filter Access
P. Brush-Roll Indicator Light
Q. Headlights
R. Brush-Roll Garage
S. Anti-Hair Wrap Brush-Roll
T. Brush-Roll Release
U. Soft Roller

ASSEMBLY

Place motorized Nozzle on the floor and insert Wand, pressing it in until it clicks securely into place
Place Pod onto the wand and slide down to connect
Insert Handle into the wand, pressing it in until it clicks securely into place
Connect Hose to back of the pod, pressing it in until it clicks securely into place
Store included accessories on the Accessory Posts on the pod

IMPORTANT: For proper operation, ensure all connections are securely clicked into place

POWER CORD

For cord access, rotate the upper hook down and remove the cord.
SETTINGS

OPERATING THE VACUUM

Press the power button to turn on the vacuum Please note the brush-rolls will not spin until you have stepped on the floor nozzle and tilted the handle back.

Thick Carpet & Area Rug Cleaning
Slide the surface switch to the top position to select Thick Carpet/Area Rug
Carpet & Low Pile Cleaning
Slide the surface switch to the middle position to select Carpet/Low Pile to increase the speed of the brush-rolls and to help remove stuck-on dust and debris
Hard Floor Cleaning
Slide the surface switch to the bottom position to select Hard Floor

BRUSH-ROLL INDICATOR LIGHT

WHAT DOES THE BRUSH-ROLL INDICATOR LIGHT MEAN?
Solid Green: The brush-rolls are spinning and working as they should.
Solid Red: There is a jam in the brush-roll area. Turn off the vacuum and unplug it, then remove any blockages in the nozzle.
Flashing Red: The motorized floor nozzle is overheating. Turn off the vacuum, unplug it, and remove any blockages. Let the vacuum cool down for at least 60 minutes before restarting. See the Troubleshooting section for more information
Flashing Green: The vacuum is operating in an environment that is either too hot or too cold This vacuum will only function properly in temperatures ranging from 32°F 0°C) to 104°F (40°C). Turn the vacuum off and adjust the room temperature. Once the temperature has reached the operating range, turn the vacuum back on.

EMPTYING THE DUST CUP

IMPORTANT: Unplug the cord before performing any maintenance.
NOTE: Empty the dust cup when or before the debris reaches the max fill line.

CLEANING AND REPLACING THE FILTERS

CLEANING FILTERS

Regularly wash, dry, and replace the filters to maintain your vacuum’s suction power.
To prevent damage from cleaning chemicals rinse filters with cold water only. Allow all filters to air-dry for at least 24 hours before reinstalling them to prevent liquid from being
drawn into electric parts.
IMPORTANT: DO NOT use soap when cleaning the filters.

CLEAN PRE-MOTOR FILTERS EVERY MONTH
Remove Dust Cup, then lift out Filters.

CLEAN POST-MOTOR FILTER EVERY YEAR
Lie unit flat on the floor so you can see the post-motor filter underneath. With the dust cup removed, press the button on the filter housing and pull forward. Remove post-motor filter y pressing the black tab until it clicks and is released from the unit. To reinstall, insert the filter into the unit by clicking into place and re-attach the filter housing.
NOTE: The pre-motor filters should be replaced every 2.5 years. The post-motor filter should be replaced every 3 years.

MAINTENANCE

NOZZLE MAINTENANCE

ANTI-HAIR WRAP BRUSH-ROLL
If any hair is wrapped around the brush-roll, continue vacuuming using Carpet/Low Pile mode on a bare floor surface, a low-pile carpet, or a small area rug. This will allow the Anti Hair Wrap brush-roll to remove the hair wrap and send it to the dust cup.
If you run over a hard or sharp object or notice a noise change while vacuuming, check for blockages or objects caught in the brush-roll.
If some fibers remain wrapped around the brush-roll after continued use, clear them from the brush-roll.

CLEANING THE SOFT ROLLER

CHECKING FOR BLOCKAGES

NOTE: Torch not included

AVAILABLE ACCESSORIES

NOTE: Not all accessories come with all units. For a list of the accessories included with this model, see the top inside flap of the box. To order additional accessories, visit sharkclean.co.uk.

A Crevice Tool
This slender tool offers extended reach to access corners, kickboards and skirting boards, tight spaces, and ceilings.
B Upholstery Tool
Picks up hair, dust, and large debris from mattresses, sofas, curtains, lampshades, and other delicate upholstered fabrics.
C Multi-Surface Tool
A single convertible tool. Use the stiff bristle brush to clean stuck-on debris, or take off the bristles to reveal an upholstery tool perfect for removing stubborn pet hair and
large piles of debris.
D Duster Crevice Tool
Two cleaning tools in one. The crevice tool gives you extended reach to clean in tight spaces, while the soft brush is ideal for dusting delicate surfaces.
E Pet Power Brush
The turbine brush loosens and removes pet hair is ideal for removing debris from stairs, and powerfully deep-cleans dander out of upholstery and other surfaces.
F Under-Appliance Wand
Clean under and behind hard-to-move appliances and furniture with this adjustable tool.Flip the extension piece over to clean the underside of the appliances.
G Anti-Allergen Dust Brush
This brush features nylon fiber bristles specifically designed for removing fine dust and allergen particles from the most delicate surfaces.
H Anti Hair Wrap Pet Power Brush
Tackles pet hair and ground-in dirt from carpeted stairs and upholstery, while actively removing hair wrap as it cleans.
I Home & Car Detail Kit
Deep-clean your car or hard-to-reach areas in your home. Micro-sized tools let you clean around delicate objects and access the tightest spaces like car vents and computer keyboards.

TROUBLESHOOTING

Power cord caught in brush-roll or floor nozzle.

To minimize the risk of power cord damage, DO NOT run the vacuum over the power cord. If this occurs, immediately shut off the power to the vacuum and remove the cord from the brushroll or nozzle.
Inspect power cord and plug for any damage before use. DO NOT use a vacuum cleaner with a damaged cord or plug. Turn off all controls before plugging in or unplugging the vacuum cleaner. Store your vacuum cleaner with the power cord secured around the two cord hooks.

The vacuum is not picking up debris.No suction.
(Refer to Maintenance section for more information.)

Check filters to see if they need cleaning. Follow instructions for rinsing and drying the filters before re-inserting in the vacuum.
Dust cup may be full; empty dust cup.
Check hose, hose connections, nozzle, and accessories for blockages; clear blockages if required.
Remove any string, carpet fibers, or hair that may be wrapped around the brush-rolls.

Vacuum lifts area rug.

Turn off the unit to disengage the brush-rolls. Move the switch to Hard Floor setting to turn on the slower brush-roll speed, which is optimal for bare floors and area rugs.
Suction is powerful. Take care when vacuuming area rugs or rugs with delicately sewn edges.

Brush-roll/soft roller does not spin.

If a brush-roll Indicator light on the floor nozzle turns red, the brush-roll and/or soft roller have stopped spinning. Immediately turn off and unplug the vacuum. Disconnect the nozzle and remove the blockage, then reconnect and turn the vacuum back on.
Once the blockage is removed, with the power on, step on the floor nozzle and tilt the handle back. The brush-rolls should then spin and cleaning can resume.

Vacuum turns off on its own or brush-roll Indicator Light flashes red.

This vacuum is equipped with a motor-protective thermostat. If your vacuum overheats, the thermostat will automatically turn the suction motor off. Perform the following steps to restart the thermostat:
1. Turn the vacuum off and unplug it.
2. Empty dust cup and clean filters (see cleaning filters section).
3. Check for blockages in hose, accessories, and inlet openings.
4. Allow the unit to cool for a minimum of 60 minutes.
5. Plugin a vacuum and turn it on.
If the hose is not fully connected to the pod, it can cause a poor electrical connection and the hose can come loose, turning the vacuum off.
1. Turn the vacuum off and unplug it.
2. Empty dust cup and clean filters.
3. Check for blockages in hose, accessories, and inlet openings.
4. Remove the cord from cord hook so the hose latch can be seen and engaged.
5. Ensure you hear an audible click at all connection points:
a. Where hose meets back of pod (may require additional force; push and pull on the hose
to ensure the latch is fully engaged)
b. Where wand plugs into floor nozzle
c. Where handle plugs into the wand
6. Plugin a vacuum and turn it on.

Note: If the vacuum still does not start, visit sharkclean.co.uk/customer-care or contact customer service on 0800 862 0453.

FIVE (5)YEAR LIMITED GUARANTEE
When a consumer buys a product in the UK, they get the benefit of legal rights relating to the quality of the product (your “statutory rights”). You can enforce these rights against your retailer. However, at Shark® we are so confident about the quality of our products that we give you an additional manufacturer’s warranty of up to five years upon registration with Shark. Offer valid only in the United Kingdom and the Republic of Ireland. These terms and conditions relate to our manufacturer’s guarantee only – your statutory rights are unaffected. The conditions below describe the prerequisites and scope of our guarantee.
Shark® Guarantees
A household appliance like a vacuum cleaner constitutes a sizeable investment. Your new machine needs to work properly for as long as possible. The guarantee it comes with is an important consideration – and reflects how much confidence the manufacturer has in its product and manufacturing quality. Every Shark machine comes with free parts and a labor guarantee. Our customer service helpline (0800 862 0453) is open from 9.00 am to 6.00 pm Monday – Friday. It’s free to call, and you’ll be put straight through to a Shark representative. You’ll also find online support at sharkclean.co.uk.
How do I register my extended Shark® guarantee?
If you have purchased your vacuum directly from sharkclean.co.uk your extended guarantee is registered automatically. You can also register your guarantee online within 28 days of purchase. To save time, you’ll need the following information about your machine:

Date you purchased the machine (receipt or delivery note)
Model Number

IMPORTANT

Both the 1 year and the extended 4 years guarantee will only cover your product from the date of purchase.
Please keep your receipt at all times. Should you need to use your extended guarantee we will need your receipt to verify the information you have supplied to us is correct. The inability to produce a valid receipt may invalidate your ability to claim against your guarantee.

What are the benefits of registering my free Shark® guarantee?
When you register your guarantee we’ll have your details to hand if we ever need to get in touch. You can also receive tips and advice on how to get the best out of your Shark vacuum and hear the latest news about new Shark® technology and launches.
If you register your guarantee online, you’ll get instant confirmation that we’ve received your details.
How long are new Shark® machines guaranteed for?
Our confidence in our design and quality control means that your new Shark vacuum cleaner is guaranteed for a total of five years (1 year plus an extended guarantee of 4 years).
What is covered by the free Shark® guarantee?
At Shark’s discretion repair or replacement of your Shark machine, including all parts and labor. A Shark guarantee is in addition to your legal rights as a consumer.
What is not covered by the free Shark® guarantee?

Blockages – for details of how to unblock your vacuum cleaner, please refer to the Operating Manual.
Normal wear and tear such as brush bar, fuse, belt, etc.
Accidental damage, faults caused by negligent use or care, misuse, neglect, careless operation or handling of the vacuum cleaner which is not in accordance with the Shark

Operating Manual supplied with your machine.

Use of the vacuum cleaner for anything other than normal domestic household purposes.
Use of parts not assembled or installed in accordance with the operating instructions.
Use of parts and accessories which are not Shark Genuine Components.
Faulty installation (except where installed by Shark).
Repairs or alterations carried out by parties other than Shark or its agents.

What happens when my guarantee runs out?
Shark does not design products to last for a limited time. We do appreciate that there may be a desire for our customers to want to repair their vacuum cleaners after the guarantee has lapsed. In this case please contact our Freephone customer service helpline and ask about our out-of guarantee program, on 0800 862 0453.
Where can I buy genuine Shark® spares and accessories?
Shark spares and accessories are developed by the same engineers who developed your Shark vacuum. You’ll find a full range of accessories, spares and replacement parts for all hark machines at sharkclean.co.uk only use Shark branded filters and accessories. Damage caused by the use of non-Shark parts may not be covered by your guarantee.

NOTES

——————–

SharkNinja Europe Limited,
3150 Century Way, Thorpe Park,
Leeds, LS15 8ZB, UK
+44 (0)800 862 0453
www.sharkclean.co.uk
SharkNinja Germany GmbH
c/o Regus Management GmbH,
Excellent Business Center 10
+11/Stock, Westhafenplatz 1,
60327 Frankfurt am Main, Germanwww.sharkclean.eu
Illustrations may differ from the actual products. We are constantly striving to improve our products, therefore the specifications contained herein are subject to change
without notice.
DUOCLEAN, POWERED LIFT-AWAY and SHARK are registered trademarks SharkNinja Operating LLC.
© 2021 SharkNinja Operating LLC.
NZ850UK.Series.IB.MP.210310.Mv1
PRINTED IN CHINA

@sharkcleaninguk

@sharkcleanuk

https://sharkclean.co.uk/register-guarantee/

TIP: You can find the model and serial numbers on the QR code label located on the back of your unit.

Shark Cordless Vacuum manual

ItsManual — Wed, 05 Apr 2023 06:54:42 +0000

Cordless Vacuum

OWNER’S GUIDE

IMPORTANT SAFETY INSTRUCTIONS

FOR HOUSEHOLD USE ONLY · PLEASE READ
ALL INSTRUCTIONS BEFORE USING THIS VACUUM.

If the charging cord plug does not fit fully into the outlet, reverse the plug.
If it still does not fit, contact a qualified electrician. DO NOT force into outlet or try to modify to fit.

To reduce the risk of shock and unintended operation, turn off power and remove the Li-Ion battery before servicing.

WARNING

To reduce the risk of fire, electric shock, injury, or property damage:

THE FLOOR NOZZLE, WAND, AND HANDHELD VACUUM CONTAIN ELECTRICAL CONNECTIONS:
This vacuum consists of a motorized nozzle, wand, and handheld vacuum. These components contain electrical connections, electrical wiring, and moving parts that potentially present risk to the user.

Before each use, carefully inspect all parts for any damage. If a part is damaged, discontinue use.
Use only identical replacement parts.
This vacuum contains no serviceable parts.
Use only as described in this manual.
DO NOT use the vacuum for any purpose other than those described in this manual.
With the exception of the filters and dust cup, DO NOT expose any parts of the vacuum to water or other liquids.
Keep the appliance and its cord out of reach of children. Do not allow the appliance to be used by children. Do not allow to be used as a toy. Close supervision is necessary when used near children.
GENERAL USE
This appliance can be used by persons with reduced physical, sensory or mental capabilities or lack of experience and knowledge if they have been given supervision or instruction concerning use of the appliance in a safe way and understand the hazards involved. Cleaning and user maintenance shall not be made by children.
Always turn off the vacuum before connecting or disconnecting any current carrying hoses, motorized nozzles, chargers, batteries, or other electrical or mechanical parts.
DO NOT handle plug or vacuum with wet hands.
DO NOT use without dust cup, filters, and brushroll in place.
Only use Shark® branded filters and accessories. Failure to do so will void the warranty.
DO NOT put any objects into nozzle or accessory openings. DO NOT use with any opening blocked; keep free of dust, lint, hair, and anything that may reduce airflow.
DO NOT use if nozzle or accessory airflow is restricted. If the air paths or the motorized floor nozzle become blocked, turn the vacuum off. Remove all obstructions before you turn on the unit again.
Keep nozzle and all vacuum openings away from hair, face, fingers, uncovered feet, or loose clothing.
DO NOT use if vacuum is not working as it should, or has been dropped, damaged, left outdoors, or dropped into water.
Use extra care when cleaning on stairs.
DO NOT leave the vacuum unattended while powered on.
When powered on, keep the vacuum moving over the carpet surface at all times to avoid damaging the carpet fibers.
DO NOT place vacuum on unstable surfaces such as chairs or tables.
DO NOT use to pick up:
a) Liquids
b) Large objects
c) Hard or sharp objects (glass, nails, screws, or coins)
d) Large quantities of dust (including drywall, fireplace ash, or embers).
DO NOT use as an attachment to power tools for dust collection.
e) Smoking or burning objects (hot coals, cigarette butts, or matches)
f) Flammable or combustible materials (lighter fluid, gasoline, or kerosene)
g) Toxic materials (chlorine bleach, ammonia, or drain cleaner)
DO NOT use in the following areas:
a) Poorly lit areas
b) Wet or damp surfaces
c) Outdoor areas
d) Spaces that are enclosed and may contain explosive or toxic fumes or vapors (lighter fluid, gasoline, kerosene, paint, paint thinners, mothproofing substances, or flammable dust)
Turn off the vacuum before plugging in or unplugging the charger.
Turn off the vacuum before any adjustment, cleaning, maintenance or troubleshooting.
During cleaning or routine maintenance, DO NOT cut anything other than hair, fibers, or string wrapped around the brushroll.
Allow all filters to air-dry completely before replacing in the vacuum to prevent liquid from being drawn into electric parts.
DO NOT modify or attempt to repair the vacuum or the battery yourself, except as indicated in this manual.
DO NOT use the battery or vacuum if it has been modified or damaged.
Damaged or modified batteries may exhibit unpredictable behavior resulting in fire, explosion or risk of injury.
Turn off all controls before unplugging.
Always turn off this appliance before connecting or disconnecting motorized nozzle or hand tool.
BATTERY PACK
The battery is the power source for the vacuum. Carefully read and follow all charging instructions.
To prevent unintentional starting, ensure the vacuum is powered off before picking up or carrying the vacuum. DO NOT carry the appliance with your finger on the power switch.
Use only Shark® charger DK33-248080H-U. Use of an incorrect charger may result in no charging, and/or unsafe conditions.
Keep the battery away from all metal objects such as paper clips, coins, keys, nails, or screws. Shorting the battery terminals increases the risk of fire or burns.
Under abusive conditions, liquid may be ejected from the battery. Avoid contact with this liquid, as it may cause irritation or burns. If contact occurs, flush with water. If liquid contacts eyes, seek medical help.
Battery should not be stored at temperatures below 37.4°F (3°C) or above 104°F (40°C) to maintain long-term battery life.
DO NOT charge battery at temperatures below 40°F (5°C) or above 104°F (40°C).
Store the appliance indoors. DO NOT use or store it below 37.4°F (3°C). Ensure the appliance is at room temperature before operating.
DO NOT expose the battery to fire or temperatures above 265°F (130°C) as it may cause explosion.

SAVE THESE INSTRUCTIONS

ASSEMBLY

Your vacuum comes equipped with either a standard wand or a MultiFLEX® wand and either a standard floor nozzle or a Dirt Engage™ floor nozzle. All versions assemble the same way.

Insert Wand into Floor Nozzle.
Insert Handheld Vacuum into wand.
For proper operation, ensure all components are completely connected and clicked into place.

2. 2.

Standard Wand OR MultiFLEX Wand

1. 1.

Standard Floor Nozzle OR Dirt Engage Floor Nozzle

NOTE: Your vacuum’s model number is located on the QR code label on the bottom of the handheld vacuum.

LI-ION BATTERY

The Shark Li-Ion battery does not come fully charged. Prior to first use, charge completely.

RUNTIMES PER FULLY-CHARGED BATTERY

To see the runtime of your Shark® cordless vacuum consult the Quick Start Guide or visit sharkclean.com/support.

LED BATTERY POWER AND CHARGING INDICATORS

Charging

Low Charge Mid Charge

Nearly Full Full Charge

NOTE: Full charge takes approximately 3 hours.

In Use

Full Charge Mid Charge Low Charge

Nearly Empty No Charge

RECYCLING THE LI-ION BATTERY

When your Shark Li-Ion battery needs to be replaced, dispose of it or recycle it in accordance with local ordinances or regulations. In some areas, it is illegal to place spent lithium-ion batteries in the trash or in a municipal solid waste stream. Return spent batteries to an authorized recycling center or to the retailer for recycling. Contact your local recycling center for information on where to drop off the spent battery.

CHARGING THE BATTERY

USING THE LI-ION CHARGER

Plug the Li-Ion Charger into a wall outlet.

Remove the handheld vacuum from the wand by pressing the Wand Release Button and pulling up. Plug the charger into the charging port on the handheld vacuum.

To put the vacuum in storage mode, press the MultiFLEX Wand Unlock Latch while folding the handheld vacuum forward until the wand clicks and locks. Plug the charger into the charging port on the handheld vacuum.

To remove the battery, squeeze the Battery Release Button and slide backwards. Plug the charger into the charging port on the battery.

NOTE: MultiFLEX wand is not included with all configurations. See enclosed Quick Start Guide for your unit’s configuration.

SETTINGS

Slide switch to the bottom to turn off power.
To begin vacuuming in Standard Mode, slide switch to the desired setting.

Bare Floor/Small Area Rugs
The brushroll spins slowly to clean bare floors and small area rugs.

Carpet
The brushroll spins faster to pick up debris below the surface of your carpets.

For an added boost in power, pull the Trigger on the handheld vacuum. Release it to return to normal power.

NOTE: For deep cleaning per ASTM F 608 (embedded dirt in carpets) please use setting II, Carpet. The Carpet setting should also be used when cleaning stuck-on dust and debris.

CLEANING MODES

To clean floors, place foot on floor nozzle and tilt handheld vacuum back.

NOTE: Brushroll will only engage when the handheld vacuum is tilted back.

Press the wand release button and lift the handheld vacuum off the wand. Attach an accessory for great cleaning on stairs, furniture, and other above-floor areas.

Stand the vacuum upright and press the nozzle release button located at the bottom of the wand, above the nozzle. Lift wand to detach.
Great for cleaning baseboards, ceiling fans, window sills, and other hard-to-access areas.

NOTE: All accessories are compatible with both the wand and the handheld vacuum.

USING THE MULTIFLEX® WAND

Press the unlock latch on the back of the wand, then adjust the angle.

Adjust the wand to a lower angle to easily clean under furniture.

MULTIFLEX STORAGE

To put the vacuum in storage mode, press the unlock latch while folding the handheld vacuum forward.

To take the vacuum out of storage mode please the unlock latch and lift up the handheld vacuum until the wand clicks and locks into place.

NOTE: Not all units come with the MultiFLEX wand. See enclosed Quick Start Guide for your configuration.

MAINTAINING YOUR VACUUM

EMPTYING THE DUST CUP

Press the wand release button to detach the handheld vacuum from the wand.

To empty the Dust Cup while it is attached to the handheld vacuum, position the dust cup over a trash receptacle and slide the Clean Touch™ Dirt Ejector slider forward.

REMOVING AND CLEANING THE DUST CUP

To remove the dust cup from the handheld vacuum, press the CleanTouch™ Dust Cup Release button near the handheld vacuum nozzle. Tilt the dust cup and lift off to remove.
To empty dust and debris, hold the dust cup over the trash, then slide the Clean Touch Dirt Ejector slider forward.

To clean the interior of the dust cup, rinse it with water. Place it on its side with the lid open to air-dry for at least 24 hours before reinstalling.

MAINTAINING YOUR VACUUM

CLEANING THE FILTERS

To clean filters, rinse them with water only. Allow all filters to air-dry completely for at least 24 hours before reinstalling to prevent liquid from being drawn into electric parts. Clean the pre-motor filters at least once a month and post-motor or HEPA filter at least once a year. Tap off loose dirt between washes when needed. More frequent cleaning may sometimes be necessary with heavy use. Cleaning the filters regularly helps maintain your vacuum’s cleaning performance.

IMPORTANT: DO NOT use soap when cleaning the filters. Use water only.

Press the dust cup release button and remove the dust cup. Pull the foam and felt filters out of the back of the dust cup.

Remove the dust cup. Pull the post-motor filter out of the handheld vacuum.

Pre-Motor Foam and Felt Filter Kit

Post-Motor HEPA Filter Post-Motor Filter

NOTE: Not all units come with a HEPA filter. See the enclosed Quick Start Guide for your unit’s configuration. To order additional accessories, visit sharkaccessories.com.

MAINTENANCE

FLOOR NOZZLE

If you run over a hard or sharp object or notice a noise change while vacuuming, check for blockages or objects caught in the brushroll.

Turn off the vacuum.
Using a coin, turn locks counterclockwise to open, then lift off cover to access brushroll.
Clear airway of blockages.
Replace cover by sliding inserts into slots, then pressing down firmly on all sides before turning locks clockwise to close. There will be an audible click once the locks are secured.

CLEANING STANDARD BRUSHROLL

Remove any string, carpet fibers, or hair that may be wrapped around the brushroll by using scissors to help loosen debris.

CLEANING DIRT ENGAGE BRUSHROLL

If any hair is wrapped around the brushroll, continue cleaning using the Carpet setting on a bare floor surface, a low-pile carpet, or a small area rug. If some fibers remain wrapped around the brushroll after continued use, carefully remove them from the brushroll.

MAINTAINING YOUR VACUUM

CHECKING FOR BLOCKAGES

Checking for Blockages in the Handheld Vacuum:

Turn off vacuum.
Remove the handheld vacuum from the wand.
Check all intake openings to the dust cup and remove any debris or blockage.

Checking for Blockages in the Wand:

Standard Wand:

Turn off vacuum
Remove the handheld vacuum and floor nozzle
Check intake openings for blockages and debris
Clear away debris and blockages

MultiFLEX® Wand:

Turn off vacuum
Remove the handheld vacuum and floor nozzle from the wand
Check the Clog Access on the MultiFLEX portion of the wand by pinching the tabs on both sides of the hose and lifting the hose out.
Clear any debris and blockages.

Checking for Blockages in the Floor Nozzle:

Turn off vacuum
Detach the wand
Use the edge of a coin to open the three locks on the bottom of the floor nozzle
Remove the cover and tilt back the neck of the floor nozzle
Check the opening and remove any debris
Replace cover by firmly pressing down on all sides and turning the locks counterclockwise

MAINTAINING YOUR VACUUM

TROUBLESHOOTING

WARNING: To reduce the risk of shock and unintended operation, turn off power and remove the Li-Ion battery before servicing.

Vacuum is not picking up debris. No suction or light suction.
(Refer to Checking for Blockages section for more information.)

Dust cup may be full; empty dust cup.
Check floor nozzle for blockages; clear blockages if required.
Remove any string, carpet fibers, or hair that may be wrapped around the brushroll.
Check connection between handheld vacuum and wand for blockages; clear blockages if required.
Check clog access door in wand for any blockages and clear any debris.
Check filters to see if they need cleaning. Follow instructions for rinsing and completely air-drying the filters before reinserting in the vacuum.

Vacuum lifts area rugs.

Take care when vacuuming area rugs or rugs with delicately sewn edges.
Turn off the unit to disengage the brushroll and restart with the power/selector switch.

Brushroll does not spin.

Immediately turn off the vacuum. Remove any blockages, then turn on the power and tilt the handle back to engage the brushroll.
If the floor nozzle has headlights and they are not illuminated, there is a connection issue between the handheld vacuum, wand, and nozzle. Try disconnecting and reattaching the pieces.

Vacuum turns off on its own.
There are several possible reasons for the vacuum turning off on its own, including blockages, battery issues, and overheating. If vacuum turns off on its own, perform the following steps:

Check LED lights on the battery to see if it needs to be recharged. If recharging is not needed, turn off vacuum and remove the battery.
Empty dust cup and clean filters (See Emptying the Dust Cup and Cleaning the Filters sections).
Check wand clog access door, accessories, and inlet openings and remove any blockages.
Allow unit and battery to cool for at least 45 minutes, until they return to room temperature.
Return battery to vacuum and restart with power/selector switch.
Note: If vacuum still does not operate properly, contact Customer Service.

LED lights on Li-Ion Battery are flashing.

Bottom LED light is flashing (Fig. A): Battery needs to be charged.
Top and bottom LED lights are flashing (Fig. B): Battery temperature is not optimal, so charging is temporarily paused. Leave battery plugged in and charging will resume soon.
If top 2 or bottom 2 LED lights are flashing (Fig. C, Fig. D), call Customer Service.

Fig. A Fig. B Fig. C Fig. D

ADDITIONAL ACCESSORIES AVAILABLE ON

A 8″ Crevice Tool
B 18″ Flexi Crevice Tool
C Duster Crevice Tool
D Dusting Brush
E Multi-Angle Dusting Brush
F Anti-Allergen Dust Brush
G Upholstery Tool
H Wide Upholstery Tool
I Pet Multi-Tool
J Deep-Cleaning Motorized Pet Tool
K MultiFLEX® Under-Appliance Wand
L Accessory Bag
M Li-Ion Charger
N Dual Li-Ion Charger
O Li-Ion Battery

A B C

D E F

G H I J

K L M N O

NOTE: Not all accessories come with all units. Please see the enclosed Quick Start Guide for your unit’s configuration.
To order additional accessories, visit sharkaccessories.com.

FIVE (5) YEAR LIMITED WARRANTY

The Five (5) Year Limited Warranty applies to purchases made from authorized retailers of SharkNinja Operating LLC. Warranty coverage applies to the original owner and to the original product only and is not transferable.

What is covered by this warranty?

The original unit and/or non-wearable components deemed defective, in SharkNinja’s sole discretion, will be repaired or replaced up to five (5) years from the original purchase date.
In the event a replacement unit is issued, the warranty coverage ends six (6) months following the receipt date of the replacement unit or the remainder of the existing warranty, whichever is later. SharkNinja reserves the right to replace the unit with one of equal or greater value.

What is not covered by this warranty?

Normal wear and tear of wearable parts (such as foam filters, HEPA filters, pads, etc.), which require regular maintenance and/or replacement to ensure the proper functioning of your unit, are not covered by this warranty. Replacement parts are available for purchase at sharkaccessories.com.
Any unit that has been tampered with or used for commercial purposes.
Damage caused by misuse (e.g., vacuuming up water or other liquids), abuse, negligent handling, failure to perform required maintenance (e.g., not cleaning the filters), or damage due to mishandling in transit.
Consequential and incidental damages.
Defects caused by repair persons not authorized by SharkNinja. These defects include damages caused in the process of shipping, altering, or repairing the SharkNinja product (or any of its parts) when the repair is performed by a repair person not authorized by SharkNinja.
Products purchased, used, or operated outside North America.

How to get service
If your appliance fails to operate properly while in use under normal household conditions within the warranty period, visit sharkclean.com/support for product care and maintenance self-help. Our Customer Service Specialists are also available at 1-800-798-7398 to assist with product support and warranty service options, including the possibility of upgrading to our VIP warranty service options for select product categories. We also ask that you register your product online at registeryourshark.com and have the product on hand when you call, so we may better assist you.

SharkNinja will cover the cost for the customer to send in the unit to us for repair or replacement. A fee of $24.95 (subject to change) will be charged when SharkNinja ships the repaired or replacement unit.

How to initiate a warranty claim
You must call 1-800-798-7398 to initiate a warranty claim. In order to better assist you please register your product prior to calling and have your product with you at the time of your call. You will need the receipt as proof of purchase. A Customer Service Specialist will provide you with return and packing instruction information. We also ask that you register your product online at registeryourshark.com and have the product on hand when you call, so we may better assist you.

How state law applies
This warranty gives you specific legal rights, and you also may have other rights that vary from state to state. Some states do not permit the exclusion or limitation of incidental or consequential damages, so the above may not apply to you.

TWO (2) YEAR LIMITED BATTERY WARRANTY

The Two (2) Year Limited Warranty applies to purchases made from authorized retailers of SharkNinja Operating LLC. Warranty coverage applies to the original owner and to the original product only and is not transferable.

SharkNinja warrants that the battery shall be free from defects in material and workmanship for a period of two (2) years from the date of purchase when it is used under normal household conditions and maintained according to the requirements outlined in the Owner’s Guide, subject to the following conditions and exclusions:

What is covered by this warranty?

1. The original battery deemed defective, in SharkNinja’s sole discretion, will be replaced up to two (2) years from the original purchase date.
2. In the event a replacement battery is issued, the warranty coverage ends six (6) months following the receipt date of the replacement battery or the remainder of the existing warranty, whichever is later. SharkNinja reserves the right to replace the unit with one of equal or greater value.

What is not covered by this warranty?

1. Normal wear and tear of the battery, which requires optimal temperature storage and operation to ensure its proper functioning. Replacement batteries are available for purchase at sharkclean.com/batteries.
2. A battery that has been tampered with or used for commercial purposes.
3. Damage caused by misuse (e.g., exposing battery to liquids or extreme hot and/or cold temperatures), abuse, negligent handling, failure to perform required maintenance, or damage due to mishandling in transit.
4. Consequential and incidental damages.
5. Defects caused by repair persons not authorized by SharkNinja. These defects include damages caused in the process of shipping, altering, or repairing the SharkNinja product (or any of its parts) when the repair is performed by a repair person not authorized by SharkNinja.
6. Products purchased, used, or operated outside North America.

How to get service
If your battery fails to operate properly while in use under normal household conditions within the warranty period, visit sharkclean.com/support for product care and maintenance self-help. Our Customer Service Specialists are also available at 1-800-798-7398 to assist with product support and warranty service options. So we may better assist you, please register your product online at registeryourshark.com and have the product on hand when you call.

SharkNinja will cover the cost for the customer to send in the unit to us for replacement. A fee of $19.95 (subject to change) will be charged when SharkNinja ships the replacement unit.

How to initiate a warranty claim
You must call 1-800-798-7398 to initiate a warranty claim. You will need the receipt as proof of purchase. We also ask that you register your product online at registeryourshark.com and have the product on hand when you call, so we may better assist you. A Customer Service Specialist will provide you with return and packing instruction information when you call.

NOTES

registeryourshark.com

RECORD THIS INFORMATION

Model Number: _________________________
Date Code: ____________________________
Date of Purchase: _____________________
(Keep receipt)
Store of Purchase:_____________________

TIP: You can find the model and serial numbers on the QR code label on the bottom of the back of the handheld vacuum and battery.

TECHNICAL SPECIFICATIONS

Voltage: 21.6V .
Watts: 181W
Amps: 8.4A

PLEASE READ CAREFULLY AND KEEP FOR FUTURE REFERENCE.
This Owner’s Guide is designed to help you keep your vacuum running at peak performance.

BATTERY REMOVAL AND DISPOSAL
This product uses a lithium-ion rechargeable and recyclable battery. When the battery no longer holds a charge, it should be removed from the vacuum and recycled. DO NOT incinerate or compost the battery.

When your lithium-ion battery needs to be replaced, dispose of it or recycle it in accordance with local ordinances or regulations. In some areas, it is illegal to place spent lithium-ion batteries in the trash or in a municipal solid waste stream. Return spent battery to an authorized recycling center or to retailer for recycling. Contact your local recycling center for information on where to drop off the spent battery.

RBRC, in cooperation with SharkNinja and other battery users, has established programs in the United States and Canada to facilitate the collection of spent lithium-ion batteries. Help protect our environment and conserve natural resources by returning the spent lithium-ion battery to an authorized SharkNinja service center or to your local retailer for recycling. You may also contact your local recycling center for information on where to drop off the spent battery, or call 1-800-798-7398.

PLEASE READ CAREFULLY AND KEEP FOR FUTURE REFERENCE.

This Owner’s Guide is designed to help you get a complete understanding of your new Shark® vacuum.

SharkNinja Operating LLC
US: Needham, MA 02494
CAN: Ville St-Laurent, QC H4S 1A7

1-800-798-7398
sharkclean.com

Illustrations may differ from actual product. We are constantly striving to improve our products; therefore the specifications contained herein are subject to change without notice.

For SharkNinja U.S. Patent information, visit sharkninja.com/uspatents

© 2019 SharkNinja Operating LLC. MULTIFLEX, ROCKET, and SHARK are registered trademarks of SharkNinja Operating LLC.
CLEANTOUCH and DIRT ENGAGE are trademarks of SharkNinja Operating LLC.
RBRC is a trademark of Rechargeable Battery Recycling Corporation.

IZ160Series_IB_E_F_S_MP_Mv2
PRINTED IN CHINA

@sharkcleaning

Shark Corded Upright Vacuum with Duo-Clean and Lift-Away Technology manual

ItsManual — Sat, 08 Apr 2023 06:37:44 +0000

Shark Corded Upright Vacuum with Duo-Clean and Lift-Away Technology

THANK YOU
for purchasing the Shark® Corded Upright Vacuum with Duo-Clean® and Lift-Away™ Technology.

IMPORTANT SAFETY INSTRUCTIONS

FOR HOUSEHOLD USE ONLY • PLEASE READ ALL INSTRUCTIONS BEFORE USING THIS VACUUM

IF YOU HAVE DELICATE OR WOOL CARPETS, PARTICULARLY LOOP PILE, PLEASE TRY THE VACUUM ON A HIDDEN AREA FIRST TO ENSURE THE SPINNING BRUSH-ROLLS DO NOT DAMAGE OR UNPICK CARPET FIBRES.

WARNING
REDUCE THE RISK OF FIRE, ELECTRIC SHOCK, INJURY, OR PROPERTY DAMAGE:

GENERAL WARNINGS

Your vacuum cleaner may consist of a motorised nozzle, wand, hose, and/ or vacuum pod. This device contains electrical connections, electrical wiring, and moving parts that potentially present risk to the user.
Use only identical replacement parts.
Carefully observe and follow the instructions provided below to avoid improper use of the appliance. DO NOT use the vacuum for any purpose other than those described in this manual.
Before use, carefully inspect all parts for any damage. DO NOT use if any parts are damaged.
The use of an extension cord is NOT recommended.
CAUTION: This vacuum cleaner handle contains electrical connections. This vacuum contains no serviceable parts.
USE WARNINGS
This appliance can be used by persons with reduced physical, sensory or mental capabilities or lack of experience and knowledge if they have been given supervision or instruction concerning use of the appliance in a safe way and understand the hazards involved.
DO NOT allow the appliance to be used by children. Keep the appliance and its cord out of reach of children.
Do not allow to be used as a toy. Close supervision is necessary when used near children. Cleaning and user maintenance shall not be done by children.
Always turn off the vacuum cleaner before connecting or disconnecting any motorised nozzles or other accessories.
DO NOT handle plug or vacuum cleaner
DO NOT use without filters in place.
Only use Shark branded filters and accessories. Use of non-Shark parts may invalidate your guarantee.
DO NOT damage the power cord:
a) DO NOT pull or carry vacuum cleaner by the cord or use the cord as a handle.
b) DO NOT unplug by pulling on cord. Grasp the plug, not the cord.
c) DO NOT run the vacuum cleaner over the power cord, close a door on the cord, pull the cord around sharp corners, or leave the cord near heated surfaces.
DO NOT put any objects into nozzle or accessory openings. DO NOT use with any opening blocked; keep free of dust, lint, hair, and anything that may reduce airflow.
DO NOT use if nozzle or accessory airflow is restricted. If the air paths or the motorised floor nozzle become blocked, turn the vacuum cleaner off and unplug from electrical outlet. Remove all obstructions before you plug in and turn on the unit again.
Keep nozzle and all vacuum openings away from hair, face, fingers, uncovered feet, or loose clothing.
DO NOT use if vacuum cleaner is not working as it should, or has been dropped, damaged, left outdoors, or dropped into water.
If the supply cord is damaged, it must be replaced by the manufacturer, its service agent or similar qualified persons in order to avoid a hazard.
Use extra care when cleaning on stairs.
DO NOT leave the vacuum cleaner unattended while plugged in.
When powered on, keep the vacuum cleaner moving over the carpet surface at all times to avoid damaging the carpet fibres.
DO NOT place vacuum cleaner on unstable surfaces such as chairs or tables.
Your Shark® vacuum may not be designed to stand up on its own.
When taking a break from cleaning, you may need to lean it against furniture or a wall, or lay it flat on the floor. Using the vacuum for an application where the unit lacks stability may result in personal injury.
DO NOT use to pick up:
a) Liquids
b) Large objects
c) Hard or sharp objects (glass, nails, screws, or coins)
d) Large quantities of dust (drywall dust,
fireplace ash, or embers). DO NOT use as an attachment to power tools for dust collection.
e) Smoking or burning objects (hot coals, cigarette butts, or matches)
f) Flammable or combustible materials (lighter fluid, gasoline, or kerosene)
g) Toxic materials (chlorine bleach, ammonia, or drain cleaner)
DO NOT use in the following areas:
a) Poorly lit areas
b) Wet or damp surfaces
c) Outdoor areas
d) Spaces that are enclosed and may contain explosive or toxic fumes or vapors (lighter fluid, gasoline, kerosene, paint, paint thinners, mothproofing substances, or flammable dust)

SAVE THESE INSTRUCTIONS

GETTING TO KNOW YOUR SHARK® CORDED UPRIGHT VACUUM WITH LIFT-AWAY™ TECHNOLOGY.

Overview

MAIN UNIT

A. Suction Control Slider
B. Handle
C. Hose
D. Handle Release Button
E. Power Switch
F. Wand Release Button
G. Wand
H. Dust-Cup Release Latch
I. Lift-Away™ Pod
J. Dust-Cup Empty Buttons
K. Lower Cord Hook
L. Lift-Away™ Food Pedal
M. Motorised Floor Nozzle
N. Headlights
O. Brush-roll indicator light
P. Soft Roller

ASSEMBLY ASSEMBLY

Insert Wand into pod
Insert Handle into wand.
Attach Hose to back of vacuum pod.

NOTE: Ensure all parts firmly CLICK into place before operating

POWER CORD

For cord access, rotate upper hook down and remove cord.

Use cord holder on the side of wand to hold cord in place while vacuuming.

SETTINGS

Select surface setting:
O Power Off
I Hard Floor
For hard floors and small area rugs.
II Carpet
For carpets.

NOTE: Brush-roll spins in all modes

The Suction Control Slider located on the handle allows you to adjust the suction depending on the floor type.
MIN: to reduce suction and increase maneuverability on carpets.
MAX: to increase suction on hard floors.

BRUSH-ROLL INDICATOR LIGHT

WHAT DOES THE BRUSH-ROLL INDICATOR LIGHT MEAN?
Solid Green: The brush-roll is spinning and working as intended.
Solid Red: There is a jam in the brush-roll area. Turn off and unplug the vacuum and remove any blockages in the nozzle.
Flashing Red: The motorised floor nozzle is overheating. Turn the vacuum off and wait a minimum of 60 minutes for the unit to cool down.

CLEANING MODES

To engage brush-roll, step on floor nozzle and tilt handle back firmly.

Step on the pedal on the floor nozzle to lift off the pod.

Press the Handle Release button and pull up on the handle to detach it from the wand.

Press the Wand Release button and pull up on the wand to detach it from the pod.

Attach an optional cleaning accessory to handle or wand.

NOTE: All accessories are compatible with both the wand and the handle. Included accessories will vary by model.

EMPTYING THE DUST CUP

IMPORTANT: Unplug the power cord before performing any maintenance.

To remove Dust Cup, pull up on the release button located on the side of dust cup handle. Tilt dust cup forward, then lift to remove.

Hold the dust cup over the receptacle and press the release button to open bottom of dust cup.

To remove collected debris from Lint Screen, lift the tab at the top of the dust cup to open the lid. Remove debris from lint screen to clean.

To reinstall, place the bottom of dust cup onto the pod and then tilt until it clicks into place.

CLEANING THE FILTERS

Regularly rinse the filters to maintain your vacuum’s suction power.

Rinse filters with cold water only. Allow all filters to air-dry for at least 24 hours before reinstalling them to prevent liquid from being drawn into electronic parts.

IMPORTANT: DO NOT use soap when cleaning the filters.

RINSE PRE-MOTOR FILTERS EVERY MONTH

Pre-Motor (foam and felt): With the dust cup removed, take out the foam and felt filters, and rinse with water. Tap loose dirt off filters between washes as needed.

RINSE POST MOTOR FILTER EVERY YEAR

To remove the Post motor Filter, first pull the tab on the bottom of the filter door, then lift off the door. Press the tab on the side of the Post motor filter.
To reinstall the door, align the top first, then press in the bottom until it clicks into place.

MAINTENANCE

CLEANING THE BRUSH-ROLL

To remove the cover, use a coin to turn the locks counterclockwise. Lift off the cover and remove any debris or hair wrap. Check the Debris Intake and clear away any dirt or blockages.
To close the cover, push down until it clicks into place, then turn the locks clockwise until closed.

CLEANING THE SOFT ROLLER

To remove the Soft Roller, slide the Eject Roller button on the floor nozzle.
Tap loose debris off the Soft Roller. Use a dry towel to wipe it clean, and to remove any debris caught in the teeth behind the Soft Roller.
Hand-wash the Soft Roller as needed. Use only water, and let it air-dry completely for at least 24 hours.
Reinsert the Soft Roller and press it in until it clicks securely into place.

NOTE: For best performance, keep the Soft Roller clean with regular maintenance.

CHECKING FOR BLOCKAGES

Check the opening at the top of the nozzle for any blockages.

Detach dust cup from vacuum pod. Empty dust cup, remove debris from lint screen, and check for blockages.

Detach wand from pod and handle, and check both ends for blockages.

Detach hose from handle by pressing on the release button at the top of the hose. Detach the hose from the pod, and check openings for blockages.

Detach handle from wand and check openings for blockages.

NOTE: Torch not included.

AVAILABLE ACCESSORIES

A. Crevice Tool B
Clean tight spaces, reach skirting boards and ceilings with this slim crevice tool.

B. Upholstery Tool
Remove pet hair and dust from curtains and other delicate fabrics and upholstery.

C. Dusting Brush
Dusts and cleans a multitude of delicate surfaces.

D. 2 in 1 Duster Crevice Tool
Two cleaning tools in one—the crevice tool gives you extended cleaning reach for small spaces, while the soft dusting brush cleans a multitude of surfaces.

E. Pet Power Brush
Picks up pet hair and loose debris, and powerfully deep cleans dander out of upholstery and other surfaces.

F. Multi Surface Tool
A single convertible tool for cleaning tough pet messes two ways: use the stiff bristle brush to clean stuck-on debris, or take off the bristles to reveal an upholstery tool perfect for removing stubborn pet hair and large piles of debris.

NOTE: Not all accessories come with all units. Please refer to the packaging panels for your unit’s configuration.
To order additional accessories, visit sharkclean.co.uk.

TROUBLESHOOTING GUIDE

WARNING: To reduce the risk of shock and unintended operation, turn power off and unplug unit before servicing.

Vacuum is not picking up debris. No suction or light suction.
(Refer to Maintenance section for more information.)

Check filters to see if they need cleaning. Follow instructions for rinsing and drying the filters before re-inserting in the vacuum.
Dust cup may be full; empty dust cup.
Check hose, hose connections, nozzle, and accessories for blockages; clear blockages if required.
Remove any string, carpet fibres, or hair that may be wrapped around the brush-rolls.

Vacuum lifts area rugs.

Turn off unit to disengage the brush-rolls. Move switch to Hard Floor setting to turn on the slow brush-rolls, which is optimal for bare floors and area rugs.
Suction is powerful. Take care when vacuuming area rugs or rugs with delicately sewn edges.
To minimise suction, refer to Suction Control section for more information on how to use.

Brush-roll/soft roller does not spin..

If brush-roll Indicator Light on the floor nozzle turns red, the brush-roll and/or soft roller have stopped spinning. Immediately turn off and unplug vacuum. Disconnect the nozzle and remove blockage, then reconnect and turn vacuum back on.
If brush-roll Indicator light repeatedly turns red while vacuuming carpet, try moving Suction Control slide to MIN.
With the power on, recline the handle, which will automatically turn on the brush-rolls.

Vacuum turns off on its own or brush-roll Indicator Light flashes red.

This vacuum is equipped with a motor-protective thermostat. If your vacuum overheats, the thermostat will automatically turn the suction motor off. Perform the following steps to restart the thermostat:

Turn vacuum off and unplug it.
Empty dust cup and clean filters (see Maintenance section).
Check for blockages in hose, accessories, and inlet openings.
Allow unit to cool for a minimum of 45 minutes.
Plug in vacuum and turn it on.

If hose is not fully connected to the pod, it can cause a poor electrical connection and the hose can come loose, turning the vacuum off.

Turn vacuum off and unplug it.
Empty dust cup and clean filters.
Check for blockages in hose, accessories, and inlet openings.
Remove cord from cord hook so hose latch can be seen and engaged.
Ensure you hear an audible click at all connection points:
a. Where hose meets back of pod (may require additional force; pull on hose to ensure latch is fully engaged)
b. Where wand plugs into floor nozzle
c. Where handle plugs into wand
Plug in vacuum and turn it on.

Note: If vacuum still does not start, visit sharkclean.co.uk/customer-care or contact customer service on: 0800 862 0453.

GUARANTEE TERMS NOTES AND CONDITIONS

When a consumer buys a product in the UK, they get the benefit of legal rights relating to the quality of the product (your “statutory rights”). You can enforce these rights against your retailer. However, at Shark we are so confident about the quality of our products that we give you an additional manufacturer’s Guarantee of up to five years upon registration with Shark. Offer valid only in United Kingdom and Republic of Ireland. These terms and conditions relate to our manufacturer’s Guarantee only – your statutory rights are unaffected.
The conditions below describe the prerequisites and scope of our Guarantee. They do not affect your statutory rights or the obligations of your retailer and your contract with them.

Shark® Guarantees
A household appliance like a vacuum cleaner constitutes a sizeable investment. Your new machine needs to work properly for as long as possible. The Guarantee it comes with is an important consideration – and reflects how much confidence the manufacturer has in its product and manufacturing quality.
Every Shark machine comes with a free parts and labour Guarantee. Our customer service helpline (0800 862 0453) is open from 9.00am to 6.00pm Monday – Friday. It’s free to call, and you’ll be put straight through to a Shark representative. You’ll also find online support at sharkclean.co.uk.

How do I register my extended Shark Guarantee?
You can register your Guarantee online within 28 days of purchase. To save time, you’ll need the following information about your machine:

Date you purchased the machine (receipt or delivery note)
To register online, please visit https://sharkclean.co.uk/register-guarantee
Serial Numb

IMPORTANT

Both the 12 months and the extended 4 years Guarantee will only cover your product from the date of purchase.
Please keep your receipt at all times. Should you need to use your extended Guarantee we will need your receipt to verify the information you have supplied to us is correct. The inability to produce a valid receipt may invalidate your Guarantee

What are the benefits of registering my free Shark Guarantee?

When you register your Guarantee we’ll have your details to hand if we ever need to get in touch. You can also receive tips and advice on how to get the best out of your Shark vacuum and hear the latest news about new Shark ® technology and launches.
If you register your Guarantee online, you’ll get instant confirmation that we’ve received your details.

How long are new Shark machines Guaranteed for?
Our confidence in our design and quality control means that your new Shark vacuum cleaner is guaranteed for a total of five years. (12 months plus an extended Guarantee of 4 years).

What is covered by the free Shark Guarantee?
Repair or replacement of your Shark machine (at Shark’s discretion), including all parts and labour. A Shark guarantee is in addition to your legal rights as a consumer.

What is not covered by the free Shark Guarantee?

Blockages – For details of how to unblock your vacuum cleaner, please refer to the Operating Manual.
Normal wear and tear such as brush bar, fuse, belt, batteries etc.
Accidental damage, faults caused by negligent use or care, misuse, neglect, careless operation or handling of the vacuum cleaner which is not in accordance with the Shark Operating Manual supplied with your machine.
Use of the vacuum cleaner for anything other than normal domestic household purposes.
Use of parts not assembled or installed in accordance with the operating instructions.
Use of parts and accessories which are not Shark Genuine Components.
Faulty installation (except where installed by Shark).
Repairs or alterations carried out by parties other than Shark or its agents

What happens when my Guarantee runs out?
Shark does not design products to last for a limited time. We do appreciate that there may be a desire for our customers to want to repair their vacuum cleaners after the Guarantee has elapsed. In this case please contact our free phone customer service help line and ask about our out Guarantee program, on 0800 862 0453.

Where can I buy genuine Shark spares and accessories?
Shark spares and accessories are developed by the same engineers who developed your Shark vacuum.
You’ll find a full range of Shark spares and replacement parts for all Shark machines at sharkclean.co.uk. Accessories are at sharkclean.co.uk.
Please remember that the use of non-Shark parts may invalidate your guarantee.

NOTES
______________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________

Euro-Pro Europe Limited,
3150 Century Way,
Thorpe Park, Leeds,
LS15 8ZB, UK
0800 862 0453
www.sharkclean.co.uk

Illustrations may differ from actual product. We are constantly striving to improve our products, therefore the specifications contained herein are subject to change without notice.

DUOCLEAN and SHARK are registered trademarks of SharkNinja Operating LLC.
LIFT-AWAY is a trademark of SharkNinja Operating LLC.

@sharkcleaninguk
@sharkcleanuk
@sharkcleanuk

Shark RV754 Ion Robot Vacuum Manual

ItsManual — Sun, 09 Apr 2023 15:33:35 +0000

Shark RV754 Ion Robot Vacuum

EASE OF A ROBOT. PERFORMANCE OF A SHARK.

SET UP YOUR CHARGING DOCK

Place with its back against the wall in an open, central location. Connect charger cord to port on back, then plug in cord.
Note: Placing your dock in a central location with a wide view to your home will improve your robot’s ability to return to the dock.

INSTALL THE SIDE BRUSHES

Snap the 2 included side brushes onto the posts on the bottom of the robot.

CHARGE YOUR ROBOT

Turn the power switch on and place your robot on the dock. When all 3 indicator lights illuminate steadily in blue, charging is complete. Press Clean to send the robot into action.

PREP YOUR HOME FOR CLEANING

With Auto-Sense™ Navigation technology, your robot maneuvers around obstructions and navigates its way out of tight spaces as it cleans. To help your robot complete its mission, prep your floor by removing all obstacles, such as loose power cords, clothes, toys, and low-hanging drapes.

DOWNLOAD THE SHARKCLEAN™ APP

Download the easy-to-use SharkClean app on your iPhone™ or Android™—schedule or start cleaning from anywhere. Just search SharkClean in the app store.

Tips, Tricks, and FAQs
Troubleshooting
Voice control setup for the Google
Assistant and Amazon Alexa

CAN’T CONNECT?

Restart your phone Reboot your robot

Lift the robot off the dock, and turn off the power switch on the side of the robot. After 10 seconds, turn the power back on and return the robot to the dock.

Reboot your router
Unplug the router’s power cable for 10 seconds, then plug it back in. Allow several minutes for your router to completely reboot and for your robot to reconnect.

Don’t forget to register your robot at registeryourshark.com For assistance, contact us at 800-798-7398 or visit us online at sharkclean.com
© 2020 SharkNinja Operating LLC EASE OF A ROBOT. PERFORMANCE OF A SHARK., SHARK, and SHARK ION ROBOT are registered trademarks of SharkNinja Operating LLC. AUTO-SENSE and SHARKCLEAN are trademarks of SharkNinja Operating LLC. AMAZON, ALEXA, and all related logos are trademarks of Amazon.com, Inc. or its affil-iates. APPLE, the Apple logo and iPhone are trademarks of Apple Inc., registered in the U.S. and other countries. APP STORE is a service mark of Apple Inc., registered in the U.S. and other countries. GOOGLE, GOOGLE ASSISTANT, GOOGLE PLAY, the Google Play logo, and Android are trademarks of GOOGLE LLC.

Shark ROCEKT PRO Powerfins Cordless Vacuum manual

ItsManual — Sun, 23 Apr 2023 17:29:22 +0000

Shark ROCEKT PRO Powerfins Cordless
 Vacuum User Guide

sharkclean.com/support
registeryourshark.com

WHAT’S INSIDE:

(A) Handheld Vacuum
(B) PowerFins Floor Nozzle
(C) Wand w/Handheld Storage Clip
(D) Crevice Tool
(E) Upholstery Tool
(F) Charger
(G) Anti-Allergen Brush
(H) Li-Ion Battery (Pre-Installed)
(i) HEPA Post-Motor Filter (Pre-Installed)

ASSEMBLY

For complete maintenance instructions, see the enclosed Owner’s Guide. For additional parts and accessories, visit sharkaccessories.com. For additional batteries and charging accessories, visit sharkclean.com/batteries.

POWER SETTINGS

OFF

Slide switch to the top to turn off power. To begin vacuuming in Standard Mode, slide switch to the appropriate setting.

BARE FLOOR SETTING

Bare Floor/Area Rugs Slide switch to the middle. The brush roll spins slowly to clean bare floors and small area rugs.

CARPET SETTING

Carpet Slide switch to the bottom. The brush roll spins faster to pick up debris below the surface of your carpets.

BOOST MODE

For an added boost in power, pull the Trigger on the handheld vacuum. Release it to return to standard power.

NOTE: For deep cleaning per ASTM F 608 (embedded dirt in carpets) please select the Carpet setting and pull the trigger to go into Boost mode.

NOTE: Select Carpet setting for stuck-on dirt and debris.

CHARGING

Easily Insert or Remove the Li-Ion Battery
To insert, slide the Battery into the slot in the back of the handheld vacuum. To remove, press and hold the Battery Release Button then slide out the battery.

LI-ION BATTERY

NOTE: Full charge takes approximately 3 hours.

NOTE: The battery comes partially charged. Charge fully before first use.
Battery Runtime

VERSATILE CLEANING

Slide the power button to the desired power setting. Place your foot on the floor nozzle and tilt the handheld vacuum back.

NOTE: Brush roll will only engage when the handle is tilted back.

To detach the wand for above-floor cleaning, stand the vacuum upright, then press the Nozzle Release button on the bottom of the wand and pull the wand up to disconnect it.

OR
To detach the handheld vacuum, press the Wand Release button and lift the handheld vacuum off the wand.

THEN
Attach a cleaning accessory, then choose the power setting.

EMPTYING THE DUST CUP

@sharkcleaning

IZ362H_QSG_MP_Mv4_200820

Shark Navigator Lift-Away ADV LA300 Manual

ItsManual — Fri, 28 Apr 2023 09:21:28 +0000

Shark Navigator Lift-Away ADV

LA300 Series

OWNER’S GUIDE

IMPORTANT SAFETY INSTRUCTIONS

FOR HOUSEHOLD USE ONLY • PLEASE READ CAREFULLY BEFORE USE

If the plug does not fit fully into the outlet, reverse the plug. If it still does not fit, contact a qualified electrician. DO NOT force into outlet or try to modify to fit.

WARNING

To reduce the risk of fire, electric shock, injury, or property damage:

GENERAL WARNINGS

Your vacuum cleaner may consist of a motorized nozzle, wand, hose, and/ or vacuum pod. This device contains electrical connections, electrical wiring, and moving parts that potentially present risk to the user.
Use only identical replacement parts.
Carefully observe and follow the instructions provided below to avoid improper use of the appliance. DO NOT use the vacuum for any purpose other than those described in this manual.
Before use, carefully inspect all parts for any damage. DO NOT use if any parts are damaged.
The use of an extension cord is NOT recommended.
This vacuum cleaner contains no serviceable parts.
USE WARNINGS
This appliance can be used by persons with reduced physical, sensory or mental capabilities or lack of experience and knowledge if they have been given supervision or instruction concerning use of the appliance in a safe way and understand the hazards involved. Cleaning and user maintenance shall not be made by children.
Keep the appliance and its cord out of reach of children. DO NOT allow the appliance to be used by children. DO NOT allow to be used as a toy. Close supervision is necessary when used near children.
Always turn off the vacuum cleaner before connecting or disconnecting any motorized nozzles or other accessories.
DO NOT handle plug or vacuum cleaner with wet hands.
DO NOT use without filters in place.
Only use Shark^® branded filters and accessories.
DO NOT damage the power cord:
a) DO NOT pull or carry vacuum cleaner by the cord or use the cord as a handle.
b) DO NOT unplug by pulling on cord. Grasp the plug, not the cord.
c) DO NOT run the vacuum cleaner over the power cord, close a door on the cord, pull the cord around sharp corners, or leave the cord near heated surfaces.
DO NOT put any objects into nozzle or accessory openings. DO NOT use with any opening blocked; keep free of dust, lint, hair, and anything that may reduce airflow.
DO NOT use if nozzle or accessory airflow is restricted. If the air paths or the motorized floor nozzle become blocked, turn the vacuum cleaner off and unplug from electrical outlet. Remove all obstructions before you plug in and turn on the unit again.
Keep nozzle and all vacuum openings away from hair, face, fingers, uncovered feet, or loose clothing.
DO NOT use if vacuum cleaner is not working as it should, or has been dropped, damaged, left outdoors, or dropped into water.
Use extra care when cleaning on stairs.
DO NOT leave the vacuum cleaner unattended while plugged in.
When powered on, keep the vacuum cleaner moving over the carpet surface at all times to avoid damaging the carpet fibers.
DO NOT place vacuum cleaner on unstable surfaces such as chairs or tables.
Your Shark^® vacuum may not be designed to stand up on its own. When taking a break from cleaning, you may need to lean it against furniture or a wall, or lay it flat on the floor. Using the vacuum for an application where the unit lacks stability may result in personal injury.
DO NOT use to pick up:
a) Liquids
b) Large objects
c) Hard or sharp objects (glass, nails, screws, or coins)
d) Large quantities of dust (drywall dust, fireplace ash, or embers). DO NOT use as an attachment to power tools for dust collection.
e) Smoking or burning objects (hot coals, cigarette butts, or matches)
f) Flammable or combustible materials (lighter fluid, gasoline, or kerosene)
g) Toxic materials (chlorine bleach, ammonia, or drain cleaner)
DO NOT use in the following areas:
a) Poorly lit areas
b) Wet or damp surfaces
c) Outdoor areas
d) Spaces that are enclosed and may contain explosive or toxic fumes or vapors (lighter fluid, gasoline, kerosene, paint, paint thinners, mothproofing substances, or flammable dust)
Turn off all controls before plugging in or unplugging the vacuum.
Unplug from electrical outlet when not in use and before any maintenance or cleaning.
Hand wash with water only. Washing with cleaning chemicals could damage the unit.
During cleaning or routine maintenance, DO NOT cut anything other than hair, fibers, or string wrapped around the brushroll.
Allow all filters to air-dry completely before replacing in the vacuum to prevent liquid from being drawn into electric parts.
Make sure the dust cup and all filters are in place after routine maintenance.
If provided, secure the power cord around the two cord hooks during storage.

To reduce the risk of electric shock, this appliance has a polarized plug (one blade is wider than the other). This plug will fit in a polarized outlet only one way. If the plug does not fit fully in the outlet, reverse the plug. If it still does not fit, contact a qualified electrician to install the proper outlet. Do not change the plug in any way.

SAVE THESE INSTRUCTIONS

ASSEMBLY

Insert Wand into pod
Insert Handle into wand.
Attach Hose to back of vacuum pod.

For proper operation, ensure all parts are firmly clicked into place.

POWER CORD

For cord access, rotate upper hook down and remove cord.

Use cord holder on the side of wand to hold cord in place while vacuuming.

WHOLE-HOME CLEANING

SETTINGS

The Suction Control Slider located on the handle allows you to adjust the suction depending on the floor type.

MIN: to reduce suction and increase maneuverability on carpets.

MAX: to increase suction on hard floors.

BRUSHROLL INDICATOR LIGHT

WHAT DOES THE BRUSHROLL INDICATOR LIGHT MEAN?

Solid Green: The brushroll is spinning and working as intended.

Solid Red: There is a jam in the brushroll area. Turn off and unplug the vacuum and remove any blockages in the nozzle.

Flashing Red: The motorized floor nozzle is overheating. Turn the vacuum off and wait a minimum of 60 minutes for the unit to cool down.

CLEANING MODES

To engage Brushroll, step on floor nozzle and tilt handle back firmly.

Step on the pedal on the floor nozzle to lift off the pod.

Press the Handle Release button and pull up on the handle to detach it from the wand.

Press the Wand Release button and pull up on the wand to detach it from the pod.

Attach an optional cleaning accessory to handle or wand.

NOTE: All accessories are compatible with both the wand and the handle. Included accessories will vary by model.

EMPTYING THE DUST CUP

IMPORTANT: Unplug the power cord before performing any maintenance.

To remove Dust Cup, pull up on the release button located on the side of dust cup handle. Tilt dust cup forward, then lift to remove.

Hold the dust cup over the waste bin and press the release button to open bottom of dust cup.

To remove collected debris from Lint Screen, lift the tab at the top of the dust cup to open the lid. Remove debris from lint screen to clean.

To reinstall, place the bottom of dust cup onto the pod and then tilt until it clicks into place.

CLEANING THE FILTERS

Regularly rinse the filters to maintain your vacuum’s suction power.

Rinse filters with cold water only. Allow all filters to air-dry for at least 24 hours before reinstalling them to prevent liquid from being drawn into electronic parts.

IMPORTANT: DO NOT use soap when cleaning the filters.

RINSE PRE-MOTOR FILTERS EVERY MONTH

Remove Dust Cup, then lift out Filters.

RINSE HEPA FILTER EVERY YEAR

To remove the HEPA Filter, first pull the tab on the bottom of the filter door, then lift off the door. Press the tab on the side of the HEPA filter and pull out the filter.

To reinstall the door, align the top first, then press in the bottom until it clicks into place.

MAINTENANCE

Clean off any debris on the bristles. Carefully use scissors within the brushroll groove to cut away any hair or debris wrapped around the brushroll.

Check the opening at the top of the nozzle for any blockages.

CHECKING FOR BLOCKAGES

Detach dust cup from vacuum pod. Empty dust cup and remove debris from lint screen in the top of the dust cup.

Detach wand from pod and handle, and check both ends for blockages.

Detach hose from handle by pressing on the release button at the top of the hose. Detach the hose from the pod, and check openings for blockages.

Detach handle from wand and check openings for blockages.

A. Crevice Tool
This slender tool offers extended reach to access corners, baseboards, tight spaces, and ceilings.
B. Upholstery Tool
Picks up hair, dust, and large debris from mattresses, couches, curtains, lampshades, and other delicate upholstered surfaces.

C. Dusting Brush
This brush dusts and cleans delicate surfaces. Great for use on fans, blinds, lampshades, and keyboards.
D. Duster Crevice Tool
Two cleaning tools in one. The crevice tool gives you extended reach to clean in tight spaces, while the soft brush is ideal for dusting delicate surfaces.

E. Pet Multi-Tool
A single convertible tool for cleaning tough pet messes two ways: use the stiff bristle brush to clean stuck-on debris, or take off the bristles to reveal an upholstery tool perfect for removing stubborn pet hair and large piles of debris.
F. Pet Power Brush
The turbine brush loosens and removes pet hair and debris from carpets, and powerfully deep-cleans dander out of upholstery and other surfaces.

G. Self-Cleaning Pet Power Brush
Tackles pet hair and ground-in dirt from above-floor areas like carpeted stairs and upholstery, while actively removing hair wrap as it cleans.

NOTE: Not all accessories come with all units. For a list of the accessories included with this model, see the top inside flap of the box. To order additional accessories, visit sharkaccessories.com.

TROUBLESHOOTING

Vacuum is not picking up debris. No suction or light suction.

Check filters to see if they need cleaning. Follow instructions for rinsing and air-drying the filters before reinstalling them in the vacuum.
Dust cup may be full; empty dust cup.
Check handle, hose, hose connections, nozzle, wand, pod, and accessories for blockages. Clear any blockages found.
If any string, hair, or carpet fibers are wrapped around the brushroll, carefully cut debris with scissors and remove from brushroll. See Nozzle Maintenance section for more information.

Vacuum lifts area rugs.

Make sure Power/Surface switch is set to Hard Floor (setting I).
Ensure the suction control slider on the handle is set to MIN.
Suction is powerful. Take care when vacuuming area rugs or rugs with delicately sewn edges.

Brushroll does not spin in carpet cleaning mode.

If the Brushroll Indicator Light turns red, immediately turn off and unplug the vacuum. Remove pod from floor nozzle and clear any blockages. Reconnect nozzle, plug in vacuum, and turn on power.
With the power on, recline the handle, which will automatically turn on the brushroll.
If this problem persists on thick carpets, move the suction control slider to MIN.

Vacuum turns off on its own or indicator light flashes red.

If your vacuum overheats, the thermostat will automatically turn the suction motor off. Perform the following steps to restart the thermostat:

Turn vacuum off and unplug it.
Empty dust cup and clean filters (see Emptying the Dust Cup and Cleaning the Filters).
Check for blockages in hose, nozzle, accessories, and inlet openings.
Allow unit to cool for a minimum of 60 minutes.
Plug in vacuum and restart with the Power/Surface switch.

Shark Corded Upright Vacuum NV602UK Manual

ItsManual — Fri, 28 Apr 2023 10:12:27 +0000

Shark Corded Upright Vacuum

sharkclean.co.uk

THANK YOU
for purchasing the Shark® Corded Upright Vacuum with Lift-AwayTM Technology

https://sharkclean.co.uk/register-guarantee/

TIP: You can find the model and serial numbers on the QR code label located on the back of your unit.
TIP: You can locate the date code on one of the prongs of the power cord plug.

REGISTER YOUR PURCHASE
TO BENEFIT FROM YOUR PRODUCT’S EXTENDED GUARANTEE, SIMPLY REGISTER YOUR PURCHASE AT:

sharkclean.co.uk/register-guarantee
+44 (0)800 862 0453
Scan QR code using a mobile device

Please note, products purchased directly from Shark are automatically registered.

Benefits of registering your product and creating an account:

Get easier, faster product support and access to guarantee the information
Access troubleshooting and product care instructions
Be among the first to know about exclusive product promotions

RECORD THIS INFORMATION
Model Number:_________________________
Serial Number:_________________________
Date Code:_________________________
Date of Purchase (Keep receipt):_________________________
Store of Purchase:_________________________

TECHNICAL SPECIFICATIONS

Voltage: 220-240V~, 50-60Hz
Body Motor Watts: 750W
Nozzle Watts: 80W

PLEASE READ CAREFULLY AND KEEP FOR FUTURE REFERENCE
This instruction manual is designed to help you get a complete understanding of your new Shark Corded Upright Vacuum with Lift-Away™ Technology.
If you have any questions, please call the customer service line on +44 (0)800 862 0453.

This marking indicates that this product should not be disposed of with other household wastes throughout the EU. To prevent possible harm to the environment or human health from uncontrolled waste disposal, recycle it responsibly to promote the sustainable reuse of material sources. To return your used device, please use the return and collection systems or contact the retailer where this product was purchased. They can take this product for environmentally safe recycling.

IMPORTANT SAFETY INSTRUCTIONS

FOR HOUSEHOLD USE ONLY · PLEASE READ ALL INSTRUCTIONS BEFORE USING THIS VACUUM

IF YOU HAVE DELICATE OR WOOL CARPETS, PARTICULARLY LOOP PILE, PLEASE TRY THE VACUUM ON A HIDDEN AREA FIRST TO ENSURE THE SPINNING BRUSH-ROLLS DO NOT DAMAGE OR UNPICK CARPET FIBRES

WARNING
REDUCE THE RISK OF FIRE, ELECTRIC SHOCK, INJURY, OR PROPERTY DAMAGE:

GENERAL WARNINGS

Your vacuum cleaner may consist of a motorized nozzle, wand, hose, and/ or vacuum pod. This device contains electrical connections, electrical wiring, and moving parts that potentially present a risk to the user.
Use only identical replacement parts.
Carefully observe and follow the instructions provided below to avoid improper use of the appliance. DO NOT use the vacuum for any purpose other than those described in this manual.
Before use, carefully inspect all parts for any damage. DO NOT use if any parts are damaged.
The use of an extension cord is NOT recommended.
CAUTION: This vacuum cleaner handle contains electrical connections. This vacuum contains no serviceable parts.
USE WARNINGS
This appliance can be used by persons with reduced physical, sensory or mental capabilities or lack of experience and knowledge if they have been given supervision or instruction concerning the use of the appliance in a safe way and understand the hazards involved.
DO NOT allow the appliance to be used by children. Keep the appliance and its cord out of reach of children. Do not allow it to be used as a toy. Close supervision is necessary when used near children. Cleaning and user maintenance shall not be done by children.
Always turn off the vacuum cleaner before connecting or disconnecting any motorized nozzles or other accessories.
DO NOT handle plug or vacuum cleaner with wet hands.
DO NOT use without filters in place.
If you have delicate or wool carpets, particularly loop pile, turn the spinning brush-roll off by selecting the Hard Floor setting when cleaning these surfaces as the bristles have the potential to damage or unpick carpet fibers.
DO NOT damage the power cord:
a) DO NOT pull or carry a vacuum cleaner by the cord or use the cord as a handle.
b) DO NOT unplug by pulling on the cord. Grasp the plug, not the cord.
c) DO NOT run the vacuum cleaner over the power cord, close a door on the cord, pull the cord around sharp corners, or leave the cord near heated surfaces.
Only use Shark branded filters and accessories. Use of non-Shark parts may invalidate your guarantee.
DO NOT put any objects into nozzle or accessory openings. DO NOT use with any opening blocked; keep free of dust, lint, hair, and anything that may reduce airflow.
DO NOT use if nozzle or accessory airflow is restricted. If the air paths or the motorized floor nozzle become blocked, turn the vacuum cleaner off and unplug it from the electrical outlet. Remove all obstructions before you plug in and turn on the unit again.
Keep nozzle and all vacuum openings away from hair, face, fingers, uncovered feet, or loose clothing.
DO NOT use if the vacuum cleaner is not working as it should, or has been dropped, damaged, left outdoors, or dropped into water.
SAVE THESE INSTRUCTIONS
READ ALL INSTRUCTIONS BEFORE USE
If the supply cord is damaged, it must be replaced by the manufacturer, its service agent, or similarly qualified persons in order to avoid a hazard.
Use extra care when cleaning on stairs.
DO NOT leave the vacuum cleaner unattended while plugged in.
When powered on, keep the vacuum cleaner moving over the carpet surface at all times to avoid damaging the carpet fibers.
DO NOT place vacuum cleaners on unstable surfaces such as chairs or tables.
Your Shark® vacuum may not be designed to stand up on its own. When taking a break from cleaning, you may need to lean it against furniture or a wall or lay it flat on the floor. Using the vacuum for an application where the unit lacks stability may result in personal injury.
DO NOT use to pick up:
a) Liquids
b) Large objects
c) Hard or sharp objects (glass, nails, screws, or coins)
d) Large quantities of dust (drywall dust, fireplace ash, or embers). DO NOT use as an attachment to power tools for dust collection.
e) Smoking or burning objects (hot coals, cigarette butts, or matches)
f) Flammable or combustible materials (lighter fluid, gasoline, or kerosene)
g) Toxic materials (chlorine bleach, ammonia, or drain cleaner)
DO NOT use in the following areas:
a) Poorly lit areas
b) Wet or damp surfaces
c) Outdoor areas
d) Spaces that are enclosed and may contain explosive or toxic fumes or vapors (lighter fluid, gasoline, kerosene, paint, paint thinners, mothproofing substances, or flammable dust)
Turn off all controls before plugging in or unplugging the vacuum.
Unplug from the electrical outlet when not in use and before any maintenance or cleaning.
Hand washes with water only. Washing with cleaning chemicals could damage the unit.
During cleaning or routine maintenance, DO NOT cut anything other than hair, fibers, or string wrapped around the brush-roll.
Allow all filters to air-dry completely before replacing them in the vacuum to prevent liquid from being drawn into electric parts.
Make sure the dust cap and all filters are in place after routine maintenance.
If provided, secure the power cord around the two cord hooks during storage.

GETTING TO KNOW YOUR SHARK® CORDED UPRIGHT VACUUM WITH LIFT-AWAY TECHNOLOGY
WELCOME!
Congratulations on your purchase. Use this instruction manual to learn about your new vacuum’s great features. From assembly to use to maintenance, you will find it all in here.

MAIN UNIT

A Suction Control Slider
B Handle
C Hose
D Handle Release Button
E Power Switch
F Wand Release Button
G Wand
H Dust-Cup Release Latch
I Lift-AwayTM Pod
J Dust-Cup Empty Buttons
K Lower Cord Hook
L Lift-AwayTM Food Pedal
M Motorised Floor Nozzle
N Headlights
O Brush-roll indicator light

ASSEMBLY

Insert Wand into the pod
Insert Handle into the wand.
Attach Hose to back of vacuum pod.

NOTE: Ensure all parts firmly CLICK into place before operating.

POWER CORD

For cord access, rotate the upper hook down and remove the cord.

Use a cardholder on the side of the wand to hold the cord in place while vacuuming.

SETTINGS

Select surface setting:
O Power Off
I Hard Floor
For hard floors, small area rugs, or delicate carpets – the brush-roll will not spin in this mode.
II Carpet
For carpets.
The Suction Control Slider located on the handle allows you to adjust the suction depending on the floor type.
MIN: to reduce suction and increase maneuverability on carpets.
MAX: to increase suction on hard floors.

BRUSH-ROLL INDICATOR LIGHT

WHAT DOES THE BRUSH-ROLL INDICATOR LIGHT MEAN?
Solid Green: The brush-roll is spinning and working as intended.
Solid Red: There is a jam in the brush-roll area. Turn off and unplug the vacuum and remove any blockages in the nozzle.
Flashing Red: The motorized floor nozzle is overheating. Turn the vacuum off and wait for a minimum of 60 minutes for the unit to cool down.

CLEANING MODES

To engage brush-roll, step on the floor nozzle and tilt the handle back firmly.

Step on the pedal on the floor nozzle to lift off the pod.

Press the Handle Release button and pull up on the handle to detach it from the wand.

Press the Wand Release button and pull up on the wand to detach it from the pod.

Attach an optional cleaning accessory to the handle or wand.

NOTE: All accessories are compatible with both the wand and the handle. Included accessories will vary by model.

EMPTYING THE DUST CUP

IMPORTANT: Unplug the power cord before performing any maintenance.

To remove Dust Cup, pull up the release button located on the side of the dust cup handle. Tilt the dust cup forward, then lift to remove.

Hold the dust cup over the bin and press the release button to open the bottom of the dust cup.

To remove collected debris from Lint Screen, lift the tab at the top of the dust cup to open the lid. Remove debris from the lint screen to clean.

To reattach, place the bottom of the dust cap onto the pod and then tilt until it clicks into place.

CLEANING THE FILTERS

Regularly rinse the filters to maintain your vacuum’s suction power.
Rinse filters with cold water only. Allow all filters to air-dry for at least 24 hours before reinstalling them to prevent liquid from being drawn into electronic parts.

IMPORTANT: DO NOT use soap when cleaning the filters.

RINSE PRE-MOTOR FILTERS EVERY MONTH
1 Pre-Motor (foam and felt):
With the dust cup removed, take out the foam and felt filters, and rinse with water. Tap loose dirt off filters between washes as needed.

RINSE POST-MOTOR FILTER EVERY YEAR
To remove the Post motor Filter, first pull the tab on the bottom of the filter door, then lift off the door. Press the tab on the side of the Post motor filter.
To reattach the door, align the top first, then press in the bottom until it clicks into place.

CLEANING THE BRUSH-ROLL

Clean off any debris on the bristles. Carefully use scissors within the brush-roll groove to cut away any hair or debris wrapped around the brush-roll.

MAINTENANCE

CHECKING FOR BLOCKAGES

Check the opening at the top of the nozzle for any blockages.

Detach dust cup from vacuum pod. Empty dust cup, remove debris from lint screen and check for blockages.

Detach wand from the pod and handle, and check both ends for blockages.

Detach the hose from the handle by pressing the release button at the top of the hose. Detach the hose from the pod, and check openings for blockages.
NOTE: Torch not included.

Detach handle from wand and check openings for blockages.

AVAILABLE ACCESSORIES

(A) Crevice Tool
Clean tight spaces, reach skirting boards and ceilings with this slim crevice tool.

(B) Upholstery Tool
Remove pet hair and dust from curtains and other delicate fabrics and upholstery.

(C) Dusting Brush
Dust and cleans a multitude of delicate surfaces.

(D) 2 in 1 Duster Crevice Tool
Two cleaning tools in one–the crevice tool gives you extended cleaning reach for small spaces, while the soft dusting brush cleans a multitude of surfaces.

(E) Pet Power Brush
Picks up pet hair and loses debris and powerfully deep cleans dander out of upholstery and other surfaces.

(F) Multi-Surface Tool
A single convertible tool for cleaning tough pet messes two ways: use the stiff bristle brush to clean stuck-on debris, or take off the bristles to reveal an upholstery tool perfect for removing stubborn pet hair and large piles of debris.

NOTE: Not all accessories come with all units. Please refer to the packaging panels for your unit’s configuration. To order additional accessories, visit sharkclean.co.uk.

TROUBLESHOOTING GUIDE

WARNING: To reduce the risk of shock and unintended operation, turn the power off and unplug the unit before servicing
Vacuum is not picking up debris No suction or light suction
(Refer to Maintenance section for more information)

Check filters to see if they need cleaning. Follow instructions for rinsing and drying the filters before re-inserting them back into the vacuum.
Dust cup may be full; empty dust cup.
Check hose, hose connections, nozzles, and accessories for blockages; clear blockages if required.
Remove any string, carpet fibers, or hair that may be wrapped around the brush-roll.

Vacuum lifts area rugs

Turn off the unit to disengage the brush-roll and restart with the POWER button for suction-only cleaning.
Suction is powerful. Take care when vacuuming area rugs or rugs with delicately sewn edges.
Turn off the unit and disengage the area rug from the brush-roll and restart the unit.

Brush-roll does not spin

If the brush roll indicator light on the floor nozzle turns red, the brush roll has stopped spinning. Immediately turn off and unplug the vacuum, disconnect the nozzle and remove blockage before reconnecting and turning the vacuum back on.
Pull the handle toward you and release the floor nozzle to disengage the auto-off feature.
Make sure that the carpet height selector is not on the HARD FLOOR setting.
Immediately turn off and unplug the vacuum, disconnect the nozzle and remove blockage before reconnecting and turning the vacuum back on.

Vacuum turns off on its own or brush-roll Indicator Light flashes red
This vacuum cleaner is equipped with a motor protective thermostat. If for some reason your vacuum overheats, the thermostat will automatically turn the suction motor off. Should this occur, perform the following steps to restart the thermostat:

Turn the unit off.
Unplug the vacuum.
Empty the dust cup and clean filters (see page previous page)
Check for blockages in hose, accessories, and inlet openings.
Allow the unit to cool for a minimum of 45 minutes.
Plugin the vacuum.
Restart the unit by turning the power on.

Note: If the vacuum still does not start, visit sharkclean.co.uk/customer-care or contact customer service on 0800 862 0453.

GUARANTEE TERMS AND CONDITIONS
When a consumer buys a product in the UK, they get the benefit of legal rights relating to the quality of the product (your “statutory rights”). You can enforce these rights against your retailer. However, at Shark, we are so confident about the quality of our products that we give you an additional manufacturer’s Guarantee of up to five years upon registration with Shark. Offer valid only in the United Kingdom and the Republic of Ireland. These terms and conditions relate to our manufacturer’s Guarantee only your statutory rights are unaffected. The conditions below describe the prerequisites and scope of our Guarantee. They do not affect your statutory rights or the obligations of your retailer and your contract with them.

Shark® Guarantees
A household appliance like a vacuum cleaner constitutes a sizeable investment. Your new machine needs to work properly for as long as possible. The guarantee it comes with is an important consideration – and reflects how much confidence the manufacturer has in its product and manufacturing quality. Every Shark machine comes with free parts and a labor guarantee. Our customer service helpline (0800 862 0453) is open from 9.00 am to 6.00 pm Monday – Friday. It’s free to call, and you’ll be put straight through to a Shark representative. You’ll also find online support at sharkclean.co.uk.

How do I register my extended Shark guarantee?
You can register your guarantee online within 28 days of purchase. To save time, you’ll need the following information about your machine:

The date you purchased the machine (receipt or delivery note)
To register online, please visit sharkclean.co.uk/uk/register-guarantee
Serial Number
IMPORTANT
Both the 12 months and the extended 4 years guarantee will only cover your product from the date of purchase.
Please keep your receipt at all times. Should you need to use your extended guarantee we will need your receipt to verify the information you have supplied to us is correct. The inability to produce a valid receipt may invalidate your guarantee.
What are the benefits of registering my free Shark guarantee?
When you register your guarantee we’ll have your details to hand if we ever need to get in touch. You can also receive tips and advice on how to get the best out of your Shark vacuum and hear the latest news about new Shark® technology and launches. If you register your guarantee online, you’ll get instant confirmation that we’ve received your details.
How long are new Shark machines guaranteed?
Our confidence in our design and quality control means that your new Shark vacuum cleaner is guaranteed for a total of five years. (12 months plus an extended Guarantee of 4 years).
What is covered by the free Shark guarantee?
Repair or replacement of your Shark machine (at Shark’s discretion), including all parts and labor. A Shark guarantee is in addition to your legal rights as a consumer.
What is not covered by the free Shark guarantee?
Blockages For details of how to unblock your vacuum cleaner, please refer to the Operating Manual.
Normal wear and tear such as brush bar, fuse, belt, batteries, etc.
Accidental damage, faults caused by negligent use or care, misuse, neglect, careless operation, or handling of the vacuum cleaner which is not in accordance with the Shark Operating Manual supplied with your machine.
Use of the vacuum cleaner for anything other than normal domestic household purposes.
Use of parts not assembled or installed in accordance with the operating instructions.
Use of parts and accessories which are not Shark Genuine Components.
Faulty installation (except where installed by Shark).
Repairs or alterations carried out by parties other than Shark or its agents.
What happens when my guarantee runs out?
Shark does not design products to last for a limited time. We do appreciate that there may be a desire for our customers to want to repair their vacuum cleaners after the Guarantee has elapsed. In this case please contact our freephone customer service helpline and ask about our out Guarantee program, on 0800 862 0453.
Where can I buy genuine Shark spares and accessories?
Shark spares and accessories are developed by the same engineers who developed your Shark vacuum. You’ll find a full range of Shark spares and replacement parts for all Shark machines at sharkclean.co.uk/uk/parts. Accessories are at sharkclean.co.uk. Please remember that the use of non-Shark parts may invalidate your guarantee.

Euro-Pro Europe Limited,
3150 Century Way,
Thorpe Park, Leeds,
LS15 8ZB, UK
0800 862 0453
www.sharkclean.co.uk
Illustrations may differ from the actual product. We are constantly striving to improve our products, therefore the specifications contained herein are subject to change without notice.
SHARK is a registered trademark of SharkNinja Operating LLC.
LIFT-AWAY is a trademark of SharkNinja Operating LLC.
© 2020 SharkNinja Operating LLC NV602UKSeries66IBMP200527Mv1 PRINTED IN CHINA

Shark VacMop VC200/UM200/VM200 Manual

ItsManual — Fri, 28 Apr 2023 11:55:49 +0000

Shark VacMop VC200/UM200/VM200 Manual

IMPORTANT SAFETY INSTRUCTIONS

PLEASE READ ALL INSTRUCTIONS BEFORE USING THIS PRODUCT.

If the charging cord plug does not fit fully into the outlet, reverse the plug. If it still does not fit, contact a qualified electrician. DO NOT force into outlet or try to modify to fit.

WARNING

To reduce the risk of fire, electric shock, injury, or property damage:

When using an electrical appliance, basic precautions should always be followed, including the following:

THIS PRODUCT CONTAINS ELECTRICAL CONNECTIONS:

Use only as described in this manual. DO NOT use the VACMOP™ for any purpose other than those described in this manual.
These components contain electrical connections, electrical wiring, and moving parts that potentially present risk to the user.
Before each use, carefully inspect all parts for any damage. If a part is damaged, discontinue use.
Use only identical replacement parts.
This VACMOP contains no serviceable parts.
DO NOT immerse or spray water on the body of the VACMOP. To clean the surface, wipe with a dry cloth.
Keep the appliance and its charging cord out of reach of children. DO NOT allow the appliance to be used by children. Do not allow to be used as a toy. Close supervision is necessary when used near children.
GENERAL USE
This appliance can be used by persons with reduced physical, sensory or mental capabilities or lack of experience and knowledge if they have been given supervision or instruction concerning use of the appliance in a safe way and understand the hazards involved. Cleaning and user maintenance shall not be made by children. Always turn off the VACMOP before connecting or disconnecting any current carrying hoses, chargers, batteries, or other electrical or mechanical parts.
DO NOT handle plug or VACMOP with wet hands.
DO NOT use without VACMOP disposable pad attached.
Only use Shark® branded VACMOP disposable pads.
DO NOT put any objects into VACMOP base. DO NOT use with any opening blocked; keep free of dust, lint, hair, and anything that may reduce airflow.
DO NOT use if VACMOP base airflow is restricted. If the air paths or the VACMOP base become blocked, turn the VACMOP off. Remove all obstructions before you turn on the unit again.
Keep all VACMOP base openings away from hair, face, fingers, uncovered feet, or loose clothing.
DO NOT use if VACMOP is not working as it should, or has been dropped, damaged, left outdoors, or dropped into water.
Use extra care when cleaning on stairs.
DO NOT place VACMOP on unstable surfaces such as chairs or tables.
DO NOT use to pick up:
a) Large quantities of dust (including drywall, fireplace ash, or embers).
b) Smoking or burning objects (hot coals, cigarette butts, or matches)
c) Flammable or combustible materials (lighter fluid, gasoline, or kerosene)
d) Toxic materials (chlorine bleach, ammonia, or drain cleaner)
DO NOT use in the following areas:
a) Poorly lit areas
b) Outdoor areas
c) Spaces that are enclosed and may contain explosive or toxic fumes or vapors (lighter fluid, gasoline, kerosene, paint, paint thinners, mothproofing substances, or flammable dust)
Release all operational triggers on the VACMOP before plugging in or unplugging the charger.
Release all operational triggers on the VACMOP before any adjustment, cleaning, maintenance or troubleshooting.
DO NOT modify or attempt to repair the VACMOP or the battery yourself, except as indicated in this manual. DO NOT use the battery or VACMOP if it has been modified or damaged. Damaged or modified batteries may exhibit unpredictable behavior resulting in fire, explosion or risk of injury.
Always release all operational triggers on this appliance before attaching or detaching a VACMOP disposable pad.
BATTERY
The battery is the power source for the VACMOP. Carefully read and follow all charging instructions.
To prevent unintentional starting, DO NOT carry the appliance with your finger on the trigger or spray button.
Use only Shark^® standard replacement charger. Use of an incorrect charger may result in no charging, and/or unsafe conditions. A charger that is suitable for one type of battery may create a risk of fire when used with another battery.
Keep the battery away from all metal objects such as paper clips, coins, keys, nails, or screws. Shorting the battery terminals increases the risk of fire or burns.
Under abusive conditions, liquid may be ejected from the battery. Avoid contact with this liquid, as it may cause irritation or burns. If contact occurs, flush with water. If liquid contacts eyes, seek medical help.
Battery should not be stored at temperatures below 37.4°F (3°C) or above 104°F (40°C) to maintain longterm battery life.
DO NOT charge battery at temperatures below 40°F (5°C) or above 104°F (40°C). Charging improperly or at temperatures outside of the specified range may damage the battery and increase the risk of fire.
Store the appliance indoors. DO NOT use or store it below 37.4°F (3°C). Ensure the appliance is at room temperature before operating.
DO NOT expose the battery to fire or temperatures above 265°F (130°C) as it may cause explosion.
Not for wet pickup.
Use only Shark brand cleaning fluids.

SAVE THESE INSTRUCTIONS

ASSEMBLY

Your VACMOP™ unit comes partially assembled with a cord connecting the parts. All versions assemble the same way. This appliance is for Household use only.

Align and insert the Handle into the top of the Pole. You will feel it click in place.
Align and insert the pole into the Main Body. You will feel it click in place.

For proper operation, ensure all components are completely connected and clicked into place.

NOTE: The model and serial numbers can be found on the QR code label on the back on the main body.

CHARGING THE LI-ION BATTERY

Plug charger into an electrical outlet.

Plug the charger into the port on the back of the main body

CONTROLS

Spray Button

Press and hold the spray button on top of the handle to dispense cleaning solution through the spray nozzle.

Vacuum Trigger

To vacuum, pull the trigger and hold it in.

ATTACHING AND REMOVING THE DISPOSABLE PADS

Place the VACMOP™ Disposable Pad on the floor with the dust chamber up. Line up the front edge of the VACMOP into the plastic bumper on the pad. Holding the handle, press the VACMOP base down until the pad clicks into place.

To detach the disposable pad, press the release button on the side of the VACMOP base. Dispose of dirty pads by releasing them directly into the trash.

DISPOSABLE PAD FUNCTIONALITY

The dirt chamber collects and locks away dirt and debris when you vacuum.

The disposable pad’s fibers absorb messes as you mop.

NOTE: DO NOT vacuum up liquid or vacuum while spraying cleaner—this will cause reduced suction or no suction. Clean liquids and wet messes ONLY by mopping.

LI-ION BATTER

Prior to first use, charge completely. A full charge takes approximately 3.5 hours.

BATTERY RUNTIME

The Shark VACMOP is designed to handle anything from quick pickups to whole cleaning sessions—just charge it between uses. If it’s used for one-off everyday messes or for more mopping than vacuuming, it will last longer on one charge. If you’re continuously vacuuming, a full charge will last up to 13 minutes.

LED BATTERY POWER AND CHARGING INDICATOR

Indicator LED
IN USE:
Normal Operation – Solid white
Low Battery – Blinking white
Very Low Battery – Blinking red
Out of battery – Rapid blinking red
CHARGING:
Battery Charging – Pulsing white
Full Charge – Solid white (will turn off after 5 minutes)

RECYCLING THE LI-ION BATTERY

When the Shark^® Li-Ion battery needs to be replaced, dispose of it or recycle it in accordance with local ordinances or regulations. In some areas, it is illegal to place spent lithium-ion batteries in the trash or in a municipal solid waste stream. Return spent batteries to an authorized recycling center or to the retailer for recycling. Contact your local recycling center for information on where to drop off the spent battery.

FILLING THE RESERVOIR

Lift the reservoir lid and press it up until it clicks into the open locked position. Carefully pour Shark VACMOP Cleaner into the reservoir, up to the MAX line. When finished, press the lid closed.

NOTE: Before using your unit for the first time, carefully add the entire starter bottle of Shark VACMOP Cleaner into the reservoir

CLEANING MODES

For best results, first use the vacuum to remove dry debris, then spray the Shark VACMOP Cleaner to wet mop.

STORAGE

After wet cleaning, remove the pad from the VACMOP™ base before storing the unit.
To store the unit, stand it upright and lean the back of the non-slip handle against a wall.
To hang the unit from a nail or wall hook (not included) align the opening at the end of the handle over the hook or nail.

DISASSEMBLY

NOTE: Once the unit is assembled, do not take it apart, unless for repacking or shipping.

Press in the snap clip with a small tool (screwdriver, pen, etc.)
While pressing down on the top snap clip, pull the handle out of the pole.
Next, press in the snap clip on the VACMOP body with a small tool.
While pressing down on the bottom snap clip, pull the pole out of the VACMOP body.

MAINTAINING YOUR VACUUM

TROUBLESHOOTING

VACMOP™ is not picking up debris. No suction or light suction.

The dirt chamber filter on the disposable pad may be saturated. Try using a new pad.
Note: DO NOT vacuum up liquid or wet debris—this will cause reduced suction or no suction.
Remove liquids and wet messes ONLY by mopping.
VACMOP Disposable Pad may not be securely attached. Reattach the pad.
VACMOP Disposable Pad may be full of debris and need to be replaced.
Battery charge may be low. Recharge the battery completely.

The unit turns off on its own. Sprayer is not spraying.

Make sure there is enough cleaning solution in the reservoir. Battery charge may be low. Recharge the battery completely.

Streaks appear on floor after wet mopping.

Shark^® VACMOP Cleaner has been specially formulated to provide a residue-free, streak-free finish when used with the Shark VACMOP. Using other cleaning solutions may result in streaking and residue. If you find residue or streaking on your floors while using our cleaner, it may be due to one of the following:
Your floor might not be fully dry yet. If you see streaks or suds while cleaning, just wait 5-10 minutes, and you should see them evaporate, leaving an even finish on your floors.
Your floors might have built-up grime and dirt. The first few times you use your VACMOP, it will remove stuck-on dirt and debris that have built up over time. After a few cleaning sessions, the streaking and residue will subside.
You may be using too much solution. If you continue to see streaking, reduce the amount of cleaning solution you use. Too much solution can cause stickiness and residue if not properly cleaned off of your floor.
The disposable pad might need to be replaced. If you are cleaning multiple times with the same pad, you may be reintroducing dirt onto the floors. Replace your pad, and consider starting each mopping session with a fresh pad to alleviate the issue.

The unit makes scraping sounds when mopping.

Debris may be stuck on the face of the pad. Detach the pad and remove any embedded debris.
The pad face may be rubbing against a rough or grainy surface. This will not damage your floors.
If your floor is uneven, the dirt chamber on the pad could be brushing against a raised section of the floor. This will not damage your floors.
Scrubbing forcefully can bring the dirt chamber in contact with the floor. This will not damage your floors.
Moving the handle when spraying could cause the front of the VACMOP base to drag. This will not damage your floors.

FREQUENTLY ASKED QUESTIONS

When should I replace my VACMOP Disposable Pad?

Replace the disposable pad when it becomes fully saturated, its dirt chamber is full, it is noticeably dirty, or if the VACMOP is showing signs of reduced suction power.

Where can I use my VACMOP?

VACMOP can safely be used on all sealed hard floors—stone, hardwood, vinyl, laminate, tile, marble, and linoleum.

Can I vacuum and mop with the same disposable pad?

VACMOP Disposable Pads can be used for both mopping and vacuuming. The dirt chamber collects and locks away dirt and debris when you vacuum, while the pad’s fibers absorb messes as you mop. Dust and debris collected on the pad when vacuuming will be absorbed when mopping.

ADDITIONAL ACCESSORIES AVAILABLE ON SHARKCLEAN.COM/VACMOP

WHAT’S INCLUDED

A. Shark^® VACMOP™ Disposable Pads
B. Shark VACMOP Cleaner
C. Standard Replacement Charger

TIP: The model and serial numbers are on the QR code label on the back of the main body.

PLEASE READ CAREFULLY AND KEEP FOR FUTURE REFERENCE.

This Owner’s Guide is designed to help you keep your VACMOP™ running at peak performance.

BATTERY REMOVAL AND DISPOSAL

This product uses a lithium-ion rechargeable and recyclable battery. When the battery no longer holds a charge, it should be removed from the VACMOP and recycled. DO NOT incinerate or compost the battery.

The RBRC™ (Rechargeable Battery Recycling Corporation) seal on the lithium-ion battery indicates that the costs to recycle the battery at the end of its useful life have already been paid by SharkNinja. In some areas, it is illegal to place spent lithium-ion batteries in the trash or municipal solid waste stream and the RBRC program provides an environmentally conscious alternative. RBRC, in cooperation with SharkNinja and other battery users, has established programs in the United States and Canada to facilitate the collection of spent lithium-ion batteries. Help protect our environment and conserve natural resources by returning the spent lithium-ion battery to an authorized SharkNinja service center or to your local retailer for recycling. You may also contact your local recycling center for information on where to drop off the spent battery, or call 1-800-798-7398.

FAQS

How long does the shark Vacmop battery last?

If it’s used for one-off everyday messes or for more mopping than vacuuming, it will last longer on one charge. If you’re continuously vacuuming, a full charge will last up to 13 minutes.

Does this product come with a warranty?

Yes, Shark vacuum cleaners come with a 1 year limited warranty.

How long does it take to charge the vacuum?

It takes about 8 hours to charge the vacuum.

What is the difference between the VC200, UM200 and VM200?

The only difference between these 3 vacuums is the color. They all have the same features and functionality.

What is the difference between the Shark Cordless Hard Floor System and other cordless vacuums?

The Shark Cordless Hard Floor System is one of the few cordless vacuums that has a motorized brush roll. This allows you to clean hard floors without having to worry about getting tangled up in wires.

Does this product have any accessories?

Yes, this product comes with a charging station, charging base and a crevice tool.

Why is my Vacmop not spraying?

The disposable pad might need to be replaced. If you are cleaning multiple times with the same pad, you may be reintroducing dirt onto the floors. Replace your pad, and consider starting each mopping session with a fresh pad to alleviate the issue. A: If it’s a full charge , you can use it.

Why is my shark Vacmop not working?

When your Shark Vacmop doesn’t charge, the problem could be a dirty outlet, old batteries, or a clogged vacuum — all easily solvable. First, try cleaning the charging station and plugging it into another outlet. If that doesn’t work, put in new batteries; they may just be worn out.

How many years does a Shark vacuum last?

Shark is a well-known brand for vacuum cleaners, particularly upright ones. They’re more affordable than some other big brands. We’d say that you can enjoy a good Shark vacuum for around five to seven years.

Can you use any solution in shark Vacmop?

While you can use any floor cleaning solution for spray mops, I used the Shark Multipurpose Cleaning Solution on sealed hardwood and ceramic tile and found it left no residue or cloudiness. Charging the VacMop was simple thanks to the magnetic charger connection.

Can you use Swiffer pads on shark Vacmop?

Arguably, the Shark Vacmop’s most compelling feature is its ability to sweep and then mop with minimal effort. With your traditional Swiffer Sweeper, you need to dispose of the dry pad and then replace it with a wet one to make the transition.

Why did my Shark vacuum stop working?

Your Shark vacuum won’t turn on because of clogged filters. Normally, dirt and hair can clog your filters, which causes your vacuum to lose suction. However, if you don’t unclog your filter and clean it regularly, it could cause your Shark vacuum not turning on or stop working completely.

Can a Shark vacuum be repaired?

If you think it’s time to get your Shark vacuum serviced, bring it your local vac shop. Most local vacuum repair stores will provide a free quote to repair or a diagnostic fee to start repair. Bagless vacuums have filters. One foam, pre filter, before the motor and one filter after the motor.

Can shark Vacmop be used on carpet?

We would like to inform you that the Vacmop is not designed to vacuum carpets. With the VACMOP you don’t have canister to empty as the dirt is collected in a chamber on the pad. The Vacmop should not be used without a pad as it could cause the unit to have issues.

What vacuum lasts the longest?

If you want a long lasting unit, you should go for Miele and Hoover. Their vacuums last from ten to twenty years. You can expect them to last fifteen years on average if you choose the right model.

VIDEO

https://manuals.plus/wp-content/uploads/2021/02/Cordless-Vacuum-Mop-_-How-to-use-the-Shark-VACMOP™-Disposable-Pad-2.mp4

Shark VacMop VC200/UM200/VM200 Manual – Optimized PDF
Shark VacMop VC200/UM200/VM200 Manual – Original PDF

M.sharkclean.com

Shark Rotator Lift-Away ZD400 Upright Vacuum Manual

ItsManual — Wed, 28 Jun 2023 06:12:09 +0000

Rotator® Lift-Away® Upright Vacuum with PowerFinsTM and Self-Cleaning Brushroll
ZD400 Series
OWNER’S GUIDE

POWERFINS

IMPORTANT SAFETY INSTRUCTIONS

FOR HOUSEHOLD USE ONLY
WARNING
To reduce the risk of fire, electric shock, injury, or property damage, when using an electrical appliance, basic precautions should always be followed, including the following:
READ ALL INSTRUCTIONS BEFORE USING THIS VACUUM

Inspect power cord and plug for any damage before use.
DO NOT use a vacuum cleaner with a damaged cord or plug. Turn off all controls before plugging in or unplugging the vacuum cleaner. Store your vacuum cleaner with the power cord secured around the two cord hooks. To minimize the risk of power cord damage, do not allow the motorized brush roll to ingest the cord. If this occurs, immediately shut off the power to the vacuum and remove the cord.
This appliance has a polarized plug, if the plug does not fit fully into the outlet, reverse the plug (one blade is wider than the other). If it still does not fit, contact a qualified electrician.
DO NOT force into an outlet or try to modify to fit.
Your vacuum cleaner may consist of a motorized nozzle, wand, hose, and/ or vacuum pod. This device contains electrical connections, electrical wiring, and moving parts that potentially present a risk to the user.
Use only identical replacement parts.
Carefully observe and follow the instructions provided below to avoid improper use of the appliance.
DO NOT use the vacuum for any purpose other than those described in this manual.
Before use, carefully inspect all parts for any damage.
DO NOT use if any parts are damaged.
The use of an extension cord is NOT recommended.
This vacuum cleaner contains no serviceable parts.
This appliance can be used by persons with reduced physical, sensory or mental capabilities or lack of experience and knowledge if they have been given supervision or instruction concerning the use of the appliance in a safe way and understand the hazards involved. Cleaning and user maintenance shall not be made by children. Keep the appliance and its cord out of reach of children.
DO NOT allow the appliance to be used by children.
DO NOT allow it to be used as a toy. Close supervision is necessary when used near children.
Always turn off the vacuum cleaner before connecting or disconnecting any motorized nozzles or other accessories.
DO NOT handle plug or vacuum cleaner with wet hands.
DO NOT use without filters in place.
Only use Shark® branded filters and accessories.
DO NOT damage the power cord:
a) DO NOT pull or carry a vacuum cleaner by the cord or use the cord as a handle.
b) DO NOT unplug by pulling on the cord. Grasp the plug, not the cord.
c) DO NOT run the vacuum cleaner over the power cord, close a door on the cord, pull the cord around sharp corners, or leave the cord near heated surfaces.
DO NOT put any objects into nozzle or accessory openings.
DO NOT use with any opening blocked; keep free of dust, lint, hair, and anything that may reduce airflow.
DO NOT use if nozzle or accessory airflow is restricted. If the air paths or the motorized floor nozzle become blocked, turn the vacuum cleaner off and unplug from the electrical outlet. Remove all obstructions before you plug in and turn on the unit again.
Keep nozzle and all vacuum openings away from hair, face, fingers, uncovered feet, or loose clothing.
DO NOT use if the vacuum cleaner is not working as it should, or has been dropped, damaged, left outdoors, or dropped into water.
Use extra care when cleaning on stairs.
DO NOT leave the vacuum cleaner unattended while plugged in.
When powered on, keep the vacuum cleaner moving over the carpet surface at all times to avoid damaging the carpet fibers.
DO NOT place vacuum cleaners on unstable surfaces such as chairs or tables.
Your Shark® vacuum may not be designed to stand up on its own. When taking a break from cleaning, you may need to lean it against furniture or a wall or lay it flat on the floor. Using the vacuum for an application where the unit lacks stability may result in personal injury.
DO NOT use to pick up:
a) Liquids
b) Large objects
c) Hard or sharp objects (glass, nails, screws, or coins)
d) Large quantities of dust (drywall dust, fireplace ash, or embers).
DO NOT use as an attachment to power tools for dust collection.
e) Smoking or burning objects (hot coals, cigarette butts, or matches)
f) Flammable or combustible materials (lighter fluid, gasoline, or kerosene)
g) Toxic materials (chlorine bleach, ammonia, or drain cleaner)
DO NOT use in the following areas:
a) Poorly lit areas
b) Wet or damp surfaces
c) Outdoor areas
d) Spaces that are enclosed and may contain explosive or toxic fumes or vapors (lighter fluid, gasoline, kerosene, paint, paint thinners, mothproofing substances, or flammable dust)
Turn off all controls before plugging in or unplugging the vacuum.
Unplug from the electrical outlet when not in use and before any maintenance or cleaning.
Hand washes with water only. Washing with cleaning chemicals could damage the unit.
During cleaning or routine maintenance, DO NOT cut anything other than hair, fibers, or string wrapped around the brush roll.
Allow all filters to air-dry completely before replacing them in the vacuum to prevent liquid from being drawn into electric parts.
Make sure the dust cup and all filters are in place after routine maintenance.
If provided, secure the power cord around the two cord hooks during storage.

SAVE THESE INSTRUCTIONS

ASSEMBLY

Insert Double Accessory Holder into the side of Pod above the Lift-Away Button.
Place pod onto Floor Nozzle Post.
Insert Wand into the pod.
Insert Handle into the wand.
Attach Hose Clip to wand.
Connect Hose to back of the pod.

IMPORTANT: For proper operation, ensure all parts are firmly clicked into place.

WHOLE-HOME CLEANING

SETTINGS

Select surface setting:
O Off
I Hard Floor
For bare floors and small area rugs.
II Carpet
For carpets.
NOTE: Brushroll spins in all modes.

Suction Control offers variable suction based on your needs. Slide to MIN to reduce suction and increase maneuverability on carpets.
Slide to MAX to increase suction on bare floors.
BRUSHROLL INDICATOR LIGHT

WHAT DOES THE BRUSH ROLL INDICATOR LIGHT MEAN?
Solid Green: The brush roll is spinning and working as it should.
Solid Red: There is a jam in the brush roll area. Turn your vacuum off, unplug from the wall and remove any blockages in the nozzle.
Flashing Red: The motorized floor nozzle is overheating. Turn off the vacuum, unplug it, and remove any blockages. Let the vacuum cool down for at least 60 minutes before restarting.
See the Troubleshooting section for more information.
NOTE: For deep carpet cleaning per ASTM F608 (embedded dirt in carpets), use Carpet setting and set suction control to MAX.
CLEANING MODES

To engage brushroll, turn the power on, then step on the floor nozzle and tilt the handle back.

Press the Lift-Away button to detach the pod from the floor nozzle.

Press the Handle Release button on the back of the wand to detach the handle from the wand.

With the pod removed, press the Wand Release button to detach the wand from the pod.

NOTE: All accessories are compatible with both the wand and the handle.

EMPTYING THE DUST CUP

IMPORTANT: Unplug the power cord before performing any maintenance. Empty the dust cup each time you vacuum and periodically during cleaning when debris in the dust cup reaches the MAX fill line.

To remove Dust Cup, lift tabs on both sides of the dust cup handle. Tilt the dust cup, then lift to remove.
To empty debris into trash, press lower release button, and the bottom of dust cup will drop open.

To remove collected debris from Lint Screen, press top release button and lift the handle to open. Gently brush lint screen to clean.

To reinstall, place the bottom of the dust cup into the pod and then tilt until it clicks into place.

CLEANING AND REPLACING THE FILTERS

CLEANING FILTERS
Regularly clean and replace the filters to keep your vacuum’s suction power optimal.
To clean filters, rinse with cold water ONLY to prevent damage from cleaning chemicals.
Allow all filters to air-dry for at least 24 hours before reinstalling them to prevent liquid from being drawn into electric parts.
IMPORTANT: DO NOT use soap when cleaning the filters.

CLEAN PRE-MOTOR FILTERS EVERY 3 MONTHS
Remove Dust Cup, then lift out Filters.

CLEAN HEPA FILTER EVERY YEAR
Press the button at bottom of the Filter Door. Tilt the filter door and lift it out. Remove HEPA Filter.
To reinstall, insert the HEPA filter into the unit and replace the filter door.
REPLACING FILTERS
Follow instructions for removing filters. The Pre-Motor Filter should be replaced every 2.5 years. The HEPA Filter should be replaced every 3 years.

MAINTENANCE

NOZZLE MAINTENANCE
SELF-CLEANING BRUSHROLL
If any hair is wrapped around the brushroll, continue vacuuming, using setting II, Carpet mode, on a bare floor surface, a low-pile carpet, or a small area rug. This will allow the self-cleaning brushroll to remove the hair wrap and send it to the dust cup. If you run over a hard or sharp object or notice a noise change while vacuuming, check for blockages or objects caught in the brushroll. If some fibers remain wrapped around the brushroll after continued use, clear them from the brushroll.

Clean off any debris on the brushroll.

To clear debris and blockages from the nozzle hose, open the locks on the bottom
of the nozzle. With a coin, turn the locks counterclockwise to open, then lift the cover.

CHECKING FOR BLOCKAGES

To minimize the risk of power cord damage, DO NOT run the vacuum over the power cord.
If this occurs, immediately shut off the power to the vacuum and remove the cord from the brushroll or nozzle.

DO NOT pull or carry a vacuum cleaner by the cord or use the cord as a handle.
DO NOT unplug by pulling on the cord.
Grasp the plug, not the cord.
DO NOT close the door on the cord.
DO NOT pull the cord around 0sharp corners.
DO NOT leave the cord near heated surfaces.

CHECKING FOR BLOCKAGES

Detach the hose from the vacuum pod, and check the hose and opening on the back of the pod for blockages.	Detach wand from floor nozzle and handle, and check both ends for blockages.
Check the opening at the top of the nozzle for any blockages.	Detach handle from wand and hose from vacuum pod, and check openings for blockages.
Detach dust cup from vacuum pod. Empty dust cup, remove debris from lint screen and check for blockages.

AVAILABLE ACCESSORIES

ACrevice Tool
Clean in corners and other tight spaces or reach baseboards and ceilings with this slim crevice tool.
B Upholstery Tool
Picks up pet hair, dust, and large debris from mattresses, couches, curtains, and other delicate upholstered fabrics.
CPet Power Brush
The turbine brush loosens and removes pet hair and debris from carpets, and powerfully deep-cleans dander out of upholstery and other surfaces.
DDusting Brush
This brush dusts and cleans delicate surfaces. Great for use on fans, blinds, lampshades, and keyboards.
EUnder-Appliance Wand
Clean under and behind hard-to-move appliances and furniture with this adjustable 36″ tool. Flip the extension piece over to clean the underside of the appliances.
FHome & Car Detail Kit
Deep-clean your cars like a professional detailer, or clean hard-to-reach areas in your home. Micro-sized tools let you clean around delicate objects and access the tightest spaces like car vents and computer keyboards. Zipper pouch and instruction sheet included.
GPet Crevice Tool
This versatile, slender tool removes pet hair from hard-to-reach spaces like corners, ceilings, and between couch cushions.
HSelf-Cleaning Pet Power Brush
Tackles pet hair and ground-in dirt from above-floor areas like carpeted stairs and upholstery, while actively removing hair wrap as it cleans.
IAccessory Bag
This convenient accessory storage bag measures 32 cm x 70 cm and fits the Under-Appliance Wand. The smaller size is available at sharkaccessories.com.
NOTE: Not all accessories come with all units. For a list of the accessories included with this model, see the top inside flap of the box. To order additional accessories, visit sharkaccessories.com.

TROUBLESHOOTING

Power cord caught in brushroll or floor nozzle. · To minimize the risk of power cord damage, DO NOT run the vacuum over the power cord.

To minimize the risk of power cord damage, DO NOT run the vacuum over the power cord.
If this occurs, immediately shut off the power to the vacuum and remove the cord from the brushroll or nozzle.
Inspect power cord and plug for any damage before use. DO NOT use a vacuum cleaner with a damaged cord or plug. Turn off all controls before plugging in or unplugging the vacuum cleaner. Store your vacuum cleaner with the power cord secured around the two cord hooks.

The vacuum is not picking up debris. No suction or light suction.

Check filters to see if they need cleaning. Follow instructions for rinsing and air-drying the filters before reinstalling them.
Dust cup may be full; empty dust cup.
Check hose, hose connections, nozzle, wand, pod, and accessories for blockages. Clear any blockages found. See the Checking for Blockages section for more information.
If any hair, string, or carpet fibers are wrapped around the brushroll, continue cleaning to allow the self-cleaning brushroll to remove them. If some hair or fibers remain wrapped around brushroll after continued use, open the brushroll cover on the bottom of the floor nozzle and carefully remove them. See the Cleaning the Brushroll section for more information.

Vacuum lifts area rugs.

Make sure the Power/Surface switch is set to Hard Floor (setting I).
Suction is powerful. Take care when vacuuming area rugs or rugs with delicately sewn edges.
To minimize suction, slide Suction Control to MIN.

Brushroll does not spin.

If the Brushroll Indicator Light turns red, immediately turn off and unplug the vacuum.
Remove the pod from the floor nozzle and clear any blockages. Reconnect the nozzle, plug-in vacuum, and turn on the power.
With the power on, recline the handle, which will automatically turn on the brushroll. Ensure that the Power/Surface switch is set to Carpet (position II) for brushroll to spin.

The vacuum turns off on its own or the indicator light flashes red.
If your vacuum overheats, the thermostat will automatically turn off the motor.
Follow these steps to restart:

Turn the vacuum off and unplug it.
Empty dust cup and clean filters (see Emptying the Dust Cup and Cleaning the Filters).
Check for blockages in hose, accessories, and inlet openings.
Allow the unit to cool for a minimum of 60 minutes.
Plugin vacuum and turn it on with the Power/Surface switch.

For all other issues, please visit our website at sharkclean.com/support.

FIVE (5) YEAR LIMITED WARRANTY

The Five (5) Year Limited Warranty applies to purchases made from authorized retailers of SharkNinja Operating LLC. Warranty coverage applies to the original owner and to the original product only and is not transferable.
SharkNinja warrants that the unit shall be free from defects in material and workmanship for a period of five (5) years from the date of purchase when it is used under normal household conditions and maintained according to the requirements outlined in the Owner’s Guide, subject to the following conditions and exclusions:
What Is Covered by this warranty?

The original unit and/or non-wearable parts deemed defective, in SharkNinja’s sole discretion, will be repaired or replaced up to five (5) years from the original purchase
In the event a replacement unit is issued, the warranty coverage ends six (6) months following the receipt date of the replacement unit or the remainder of the existing warranty, whichever is SharkNinja reserves the right to replace the unit with one of equal or greater value.

What Is not covered by this warranty?

Normal wear and tear of wearable parts (such as foam filters, HEPA filters, pads, etc.), which require regular maintenance and/or replacement to ensure the proper functioning of your unit, are not covered by this warranty. Replacement parts are available for purchase at sharkaccessories.com.
Any unit that has been tampered with or used for commercial purposes.
Damage caused by misuse (e.g., vacuuming up water or other liquids), abuse, negligent handling, failure to perform required maintenance (e.g., not cleaning the filters), or damage due to mishandling in transit.
Consequential and incidental damages.
Defects caused by repair persons not authorized by These defects include damages caused in the process of shipping, altering, or repairing the SharkNinja product (or any of its parts) when the repair is performed by a repair person not authorized by SharkNinja.
Products purchased, used, or operated outside North America.

How to girt service
If your appliance fails to operate properly while in use under normal household conditions within the warranty period, visit sharkclean.com/support for product care and maintenance self-help. Our Customer Service Specialists are also available at 1-800-798-7398 to assist with product support and warranty service options, including the possibility of upgrading to our VIP warranty service options for select product categories. So we may better assist you, please register your product online at registeryourshark.com and have the product on hand when you call.
SharkNinja will cover the cost for the customer to send in the unit to us for repair or replacement. A fee of $25.95 (subject to change) will be charged when SharkNinja ships the repaired or replacement unit.
How to initiate a warranty claim
You must call 1-800-798-7398 to initiate a warranty claim. You will need the receipt as proof of purchase. We also ask that you register your product online at registeryourshark.com and have the product on hand when you call, so we may better assist you. A Customer Service Specialist will provide you with return and packing instruction information.
How state law applies
This warranty gives you specific legal rights, and you also may have other rights that vary from state to state. Some states do not permit the exclusion or limitation of incidental or consequential damages, so the above may not apply to you.
REGISTER YOUR PURCHASE
registeryourshark.com
Scan QR code using a mobile device

http://registeryourshark.com

RECORD THIS INFORMATION
Model Number:
Serial Number:
Date of Purchase (Keep receipt):
Store of Purchase:

TECHNICAL SPECIFICATIONS
Voltage: 120 V~, 60 Hz
Watts: 960W

Benefits of registering your product and creating an account:

Get easier, faster product support and access to warranty information
Access troubleshooting and product care instructions
Be among the first to know about exclusive product promotions

TIP: You can find the model and serial numbers on the QR code label which is located on the bottom of the back of the vacuum pod.
PLEASE READ CAREFULLY AND KEEP IT FOR FUTURE REFERENCE.
This Owner’s Guide is designed to help you get a complete understanding of your new Shark® Rotator® Lift-Away® ADV Upright Vacuum.
SharkNinja Operating LLC
US: Needham, MA 02494
CAN: Ville St-Laurent, QC H4S 1A7
1-800-798-7398
sharkclean.com
Illustrations may differ from the actual products.
We are constantly striving to improve our products;
therefore the specifications contained herein are subject to change without notice.
This product may be covered by one or more U.S. patents. See sharkninja.com/patents for more information.
© 2021 SharkNinja Operating LLC. DUOCLEAN, LIFT-AWAY, ROTATOR, and SHARK have registered trademarks of SharkNinja Operating LLC. POWER FANS is a trademark of SharkNinja Operating LLC.
PRINTED IN CHINA

@shnrkcleaning

sharkclean.com