Operating Instructions
Oven Hotpoint SH53X

Control Panel

Starting the oven

Select the desired cooking mode by turning the SELECTOR knob.

1. Select the desired temperature with the THERMOSTAT knob.
2. When lit, the THERMOSTAT indicator light indicates that the oven is heating up to the temperature set.
3. You may do the following during cooking:
   • Change the cooking mode by turning the SELECTOR knob.
   • Change the temperature by turning the THERMOSTAT knob.
   • Stop cooking by turning the SELECTOR knob to the “0” position.

Cooking ventilation

In order to cool down the external temperature of the oven, some models are fitted with a cooling fan that blows out air between the control panel and the oven door.
Once the cooking has been completed, the cooling fan remains on until the oven has cooled down sufficiently.

Oven light

It goes on when selecting with the SELECTOR model knob. It stays on when a cooking mode is selected.
How to use the timer

1. To set the buzzer, turn the TIMER knob clockwise for almost one complete revolution.
2. Turn the knob anticlockwise to set the desired time: align the minutes shown on the TIMER knob with the indicator on the control panel.
3. The timer operates in minutes: when the selected time has elapsed, a buzzer will sound.
4. The time does not turn the oven on or off.

The electronic cooking programmer

Button functions:

Delayed cooking time for a specified period

The total cooking time as well as the time at which the cooking will finish must be set. If we assume that the time the display reads 10:00.

1. Turn the oven control knob to the setting and temperature desired
2. Press the button and then set the cooking time (within 4 seconds) using the – and + buttons.
   Supposing the cooking time is set to 30 minutes, the display will read as follows:
   Release the button, and within 4 seconds, the current time will reappear with the symbol along with the word “auto” 3.
3. Press the button and then use the – and + buttons to set the time for when the cooking program should end. Let us imagine this time to be 1:00 pm
4. After the button has been released, the current time will be displayed after approximately 4 seconds:

When “auto” is on, it indicates that the length of cooking time and the time it is due to finish have been programmed in automatic mode. At this point, the oven will turn on automatically at 12:30 and turn off after 30 minutes. When the oven is turned on, the symbol will be displayed for the entire cooking time. The cooking duration can be displayed at any time by pressing the button and the time it is due to finish may be displayed by pressing the button.
Once cooking is completed, the time will ring; to then it off, simply press any button except the – and + buttons.

Immediate start for a specified period

By programming just the duration (Points 1 and 2 of the “Delayed cooking time for specified period” section), cooking will begin immediately.

To cancel a cooking schedule already programmed

Press the button, and use the -button to set the time to:
Then press the manual cooking mode button.

Timer feature

The timer feature allows you to enter a specific amount of time and begins to count down. This feature does not turn the oven on or off; it merely sounds when the time has elapsed.
When the button has been pressed, the display will read as follows:

Then use the -and + buttons to set the desired time. As soon as the button has been released, the timer will start to count down and the current time will be displayed.
After the time has expired, an audible signal will be emitted, which can be turned off by pressing any button (except the +and-
buttons). At this point, the symbol will also turn off.

Correction/Cancellation of data

• The data entered can be changed at any time by pressing the corresponding button and the+ or -buttons.
• When the data for the cooking duration is canceled, the data for the time cooking is due to end is also canceled automatically and vice versa.
• If the oven has already been programmed, it will not accept times for the need of cooking which are before the start of the programmed cooking process.

The electronic cooking programmer

Setting the timer

This function does not interrupt cooking and does not affect the oven; it is simply used to activate the buzzer when the set amount of time has elapsed.

1. Press the button several times until the icon and the three digits on the display begin to flash.
2. Use the “+” and “-“ buttons to set the desired time; if you press and hold either button, the display will scroll through the values more quickly, making it quicker and easier to set the value.
3. Wait for 10 seconds or press the button again to finalize the setting.
   The display will then show the time as it counts down. When this period of time has elapsed, the buzzer will be activated.

Programming cooking

A cooking mode must be selected before programming can take place.

Programming the cooking duration

• Press the button several times until the icon and the three digits on the DISPLAY begin to flash.
• Use the “+” and “-“ buttons to set the desired duration; if you press and hold either button, the display will scroll through the values more quickly, making it quicker and easier to set the value.
• Wait for 10 seconds or press the button again to finalize the setting.
• When the set time has elapsed, the text END appears on the DISPLAY, the oven will stop cooking and a buzzer sounds.

Setting the end time for a cooking mode

A cooking duration must be set before the cooking end time can be scheduled.

1. Follow steps 1 to 3 to set the duration as detailed above.
2. Next, press the button until the icon and the four digits on the DISPLAY begin to flash.
3. Use the “+” and “-“ buttons to adjust the cooking end time; if you press and hold either button, the display will scroll through the values more quickly, making it quicker and easier to set the desired value.
4. Wait for 10 seconds or press the button again to finalize the setting.
5. When the set time has elapsed, the text END appears on the DISPLAY, the oven will stop cooking and a buzzer sounds.

Programming has been set when the and buttons are illuminated. The DISPLAY shows the cooking end time and the cooking duration alternately.

Canceling a program

• Press the button until the icon corresponds to the setting you wish to cancel and the digits on the display are no longer flashing. Press the “-“ button until the digits 00:00 appear on the display.
• Press and hold the “+” and “-“ buttons; this will cancel all the settings selected previously, including timer settings.

Cooking modes

A temperature value can be set for all cooking modes between 60°C and Max, except for

• GRILL (recommended: set only to Max power level)
• GRATIN (recommended: do not exceed 200°C)

Traditional Oven mode
Both the top and bottom heating elements will come on. With this traditional cooking mode, it is best to use one cooking rack only; if more than one rack is used, the heat will be distributed unevenly.

Multi-Cooking mode
All the heating elements (top and bottom), as well as the fan, will come on. Since the heat remains constant throughout the oven, the air cooks and browns food uniformly. A maximum of two racks may be used at the same time.
Top oven mode
The top heating element comes on. This mode can be used to brown food at the end of cooking.

Grill mode
The top heating element comes on. The extremely high and direct temperature of the grill makes it possible to brown the surface of meats and roasts while locking in the juices to keep them tender. The grill is also highly recommended for dishes that require a high temperature on the surface e.g. Beef steaks, hamburgers, etc. Always cook in this mode with the oven door closed.
Gratin mode
The top heating element, as well as the fan, will come on. This combination of features increases the effectiveness of the unidirectional thermal radiation of the heating elements through the forced circulation of the air throughout the oven. This helps prevent food from burning on the surface, allowing the heat to penetrate right into the food. Always cook in this mode with the oven door closed.

Cooking advice table

saco SE64M350GB Dishwasher Siemens Instruction Manual

Control Panel

1. Main switch
2. Door Opener
3. Time delay
4. Digital display
5. Additional options (on some models)
6. “Check water supply” indicator
7. Salt refill indicator
8. Rinse-aid refill indicator
9. Programme buttons

Switching the dishwasher on

• Set the main switch to ON. Indicators light up according to the last programme that was selected. The same programme will run again if no other programme button is pressed.
• The numerical display shows the expected duration of the programme.
• The programme starts automatically.

Remaining running time display

When the appliance has started, the expected programme running time is displayed. The running time is affected by the water temperature, the number of dishes as well as the degree of soiling. If these conditions are changed, the running time can vary greatly.

End of programme

The end of the programme is indicated by a buzzer.

Switching the dishwasher off

Several minutes after the programme has ended, open the door and set the main switch to OFF. Remove dishes when they have cooled down.

Interrupting the programme

• Open the door but be careful of any water from inside the appliance. Do not open the door fully until the spray arm has stopped rotating.
• Turn the main switch to Off.
• The indicator lights will extinguish and the programme is retained in the dishwasher memory.
• In order to continue with the stored programme, set the main switch to On again and close the door.

Terminating the programme (Reset)

• Simultaneously press programme buttons A and C for approx. 3 seconds. The numerical display displays
• Close the door. The programme sequence lasts approx.1 minute.
• Switch off the main switch.

Changing the programme

When the appliance is switched on the programme can be changed within minutes. If the programme is changed subsequently, programme sections (e.g. Cleaning) which have already started run to the end. The new remaining time consists of the remaining time of the previous programme section and the remaining time of the newly selected programme.

Intensive drying

In the final rinse the appliance operates at a higher temperature and therefore an improved drying result is obtained.

• Hold down programme button A and press main switch until the digital display illuminates. Release both buttons.
• The LED for button A flashes and the digital display displays the factor setting  or
• To change the setting press programme button A and switch off the main switch.

Saving time

• The ‘Save time’ function can reduce the running time by approx. 20% to 50% depending on the selected rinse programme. The particular change in the running time is indicated on the time remaining display. To obtain optimum cleaning and drying results at a reduced running time, water and energy consumption are increased.

Half Load

If you have only a few items to wash you can switch to “Half load”. The “half load” additional function saves water, energy and time.

Overview of programmes

Saco Washer Dryer BEKO WMI61241 Operating Instructions

Sorting the laundry

Sort laundry according to type of fabric, colour and degree of soiling and allowable water temperature. Always obey the instructions given on the garment tags.

Correct load capacity

The maximum load capacity depends on the type of laundry, the degree of soiling and the washing programme desired. The machine automatically adjusts the amount of water according to the weight of the loaded laundry.

Loading the laundry

1. Open the loading door
2. Place laundry items loosely into the machine
3. Push the loading door to close until you hear a locking sound. Ensure that no items are caught in the door.

The loading door is locked while the programme is running. The door can only be opened a while after the programme comes to an end.

Detergent drawer

Detergent drawer of your machine consists of four different compartments for powder main wash detergent, liquid main wash detergent, liquid softener and powder pre-wash detergent. Each of these are dispensed automatically in the relevant time during the washing Programme. Do not place the laundry additives directly into the drum. Always use the detergent drawer. Do not open the drawer during a washing programme.

1. Left compartment with number (Main wash compartment for powder detergent or powder bleach/stain remover)
2. Left compartment with number (Main wash compartment for liquid detergent or liquid stain remover).
3. Middle compartment with number “I” (pre-wash compartment for powder detergent, powder stain remover or liquid bleach. Liquid bleach must be added manually while the machine takes in water during the pre-wash or first rinsing step of the washing powder.
4. Right compartment with symbol (liquid softener compartment)

Description of appliance

1. Spin Speed adjustment button
2. Display
3. Temperature adjustment button
4. Programme selection knob
5. On/Off button
6. Delayed start buttons (+/-)
7. Auxiliary function buttons
8. Start/Pause/Cancel button

Display symbols

a – Spin speed indicator
b – Temperature indicator
c – Spin symbol
d – Temperature symbol
e – Remaining time and delayed start indicator
f – Programme indicator symbols (Prewash/Main wash/Rinse/Softener/Spin)
g – Economy symbol
h – Delayed start symbol
I – Door locked symbol
j – Start symbol
k – Pause symbol
l – Auxiliary function symbols
m – No water symbol

Programme selection

1. Select the programme suitable for the type, quantity and soiling degree of the laundry.
2. Select the desired programme with the programme selection button

Temperature selection

Whenever a new programme is selected, the maximum temperature for the selected programme appears on the temperature indicator. To decrease the temperature, press the Temperature adjustment button. Temperature decreases with increments of 10º and finally “- “symbol indicating the cold wash option appears on the display.

Spin speed selection

Whenever a new programme is selected, the recommended spin speed of the selected programme is displayed on the spin sped indicator. To decrease the spin speed, press the Spin speed adjustment button. Spin speed decreases gradually. Then, depending on the model of the product, “Rinse Hold” and “No Spin” options appear on the display.

Programme and consumption table

Auxiliary function selection

Select the desired auxiliary functions before starting the programme. Furthermore, you may also select or cancel auxiliary functions that are suitable to the running programme by pressing the Start/Pause/Cancel button when the machine is operating. For this, the machine must be in a step before the auxiliary function you are going to select or cancel. Depending on the programme, press a,b,c or d buttons to select the desired auxiliary function. Symbol of the selected auxiliary function appears on the display.

Anti-crease option

The wash programme stops on the last rinse, with the clothes left in water. When the function is deactivated, the washing machine continues the programme, draining and spin-drying.

It is used, for example, when you are not at home and want to delay the spin-drying until you get home, to prevent the clothes creasing after spin-drying and being left in the drum to be removed.

Rinse hold

If you are not going to unload your clothes immediately after the programme completes, you may use rinse hold function to keep your laundry in the final rinsing water in order to prevent them from getting wrinkled when there is no water in the machine. Press Start/Pause/Cancel button after this process if you want to drain the water without spinning your laundry. Programme will resume and complete after draining the water.

If you want to spin the laundry held in water, adjust the Spin Speed and press Start/Pause/Cancel button. The programme resumes. Water is drained, laundry is spun and the programme is completed.

Time display

Remaining time to complete the programme appears on the display while the programme is running. Time is displayed in hours and minutes format.

Delayed start

With the delayed start function the startup of the programme may be delayed up to 24 hours. Delayed start time can be increased by increments of 30 minutes. Do not use liquid detergents when you set delayed start as there is the risk of staining.

1. Open the door, place the laundry, put the detergent in etc.
2. Select the washing programme, temperature, spin speed and if required the auxiliary functions
3. Set the desired delayed start time by pressing the Delayed Start + or – buttons. Delayed Start symbol flashes.
4. Press Start/Pause/Cancel button. Delayed Start symbol illuminates steadily. Start symbol appears. “:” sign in the middle of the delayed start time on the display starts flashing.

Additional laundry may be loaded during the delayed start period. At the end of the countdown, Delayed Start symbol disappears, washing cycle starts and the time of the selected programme appears on the display.

Cancelling the delayed start function

If you want to cancel the delayed start countdown and start the programme immediately:

1. Press Start/Pause/Cancel button. “:” sign in the middle of the delayed start time on the display stops flashing.
2. Start symbol disappears. Pause symbol and delayed start symbol flashes.
3. Decrease the delayed start time by pressing the Delayed Start – button. Programme duration appears after 30 minutes.
4. Press Start/Pause/Cancel button to start the programme.

Starting the programme

1. Press Start/Pause/Cancel button to start the programme.
2. Start symbol showing the startup of the programme will turn on.
3. Loading door is locked and door locked symbol appears on the display.
4. The symbol of the step from which the programme has started appears on the display (Prewash, Main wash, Rinse, Softener and Spin).

Changing the selections after the programme has started

To pause the machine, press the Start/Pause/Cancel button to switch the machine to pause mode. The pause symbol appears on the display indicating that the machine is paused. The Start symbol disappears.

Changing the speed and temperature settings for auxiliary functions

Depending on the step the programme has reached, you may cancel or activate the auxiliary functions. You may also change the speed and temperature settings.

Cancelling the programme

Press and hold Start/Pause/Cancel button for 3 seconds. Start symbol flashes. Symbol of the step at which the programme was cancelled remains lit. “End” appears on the display and the programme is cancelled.

Control Panel

Description of Controls

B. Door Open Button
A special safety device prevents the porthole from being opened immediately after the end of the cycle. Wait for 2 minutes after the wash cycle ha finished before opening the door.
C. On/Off Button
Press to start the appliance. At the end of the cycling press again to reset the button and switch off the appliance.
D. EXTRA RINSE Button
By pressing the “EXTRA RINSE” button, even the slightest residue of detersive is removed from the fabrics. This is particularly important for people with delicate skins.
E. QUICK WASH Button
Pressing this button reduces the time of the wash program by a maximum of 50 minutes depending upon the program selected. The quick wash button can be used for washing loads of 1 to 5kg. (This button can be utilized only on cotton and synthetic programs).
F.  HIGH DRY Button
Recommended: press this button for an extra intense drying cycle suitable for hard-wearing fabrics e.g. towels, jeans.
H. WASH TEMPERATURE selector
Can be turned in either direction
This washing machine is equipped with this device for setting the wash temperature you want. We recommend that the temperature shown on the label inside garments should never be exceeded.
I. DRYING TIME MINS
CAUTION: Never turn the knob anti-clockwise, but always clockwise.
The drying timer (I) sets drying time up to a max. 120 mins. (the symbol represents a 10 minutes cool tumble, number 2 represents 20 minutes, etc.)
WARNING: Drying can be stopped even when the machine is running. Just turn the drying timer clockwise to the cooling symbol and wait for the cycle to end before opening the door. L. PROGRAMME Selector
Note: never turn the dial anti-clockwise. (Turn it clockwise and do not press the on/off button before selecting the program.)
M. “DRYING” INDICATOR LIGHT
This light will illuminate when the machine is in the drying cycle.
N. ON/OFF INDICATOR LIGHT
The machine-on indicator light is illuminated when the on/off button is depressed.
O. PILOT LIGHT FOR EXTRA DRYING
Pilot light will come on when dry high button is pressed.
Drying

• Turn the wash temperature control (H) to “0”.
• Press On/Off button(C).
• Warning lights (M-N-O) will come on.
• The drying time (I) will rotate automatically to zero.
• Drying will start with the program dial (L) stationary on the symbol, or symbol until the drying cycle ends, then it rotates to “Stop”.
• Now press the “On/Off” button(C).
• Warning lights (M-N-O) will go off.
• Open the door and take out your laundry.

Operating Instructions – Dishwasher BEKO DIN15210

Control Panel

1. Programme Indicator Light
2. Tablet Detergent Indicator
3. Salt Level Indicator Light
4. Time Delay Indicator
5. Start / Stop Indicator Light
6. Start / Stop Button
7. Time Delay Button
8. Rinse Aid Indicator Light
9. Half Load Indicator Light
10. Half Load / Tablet Detergent Button
11. Programme Selection Button
12. On/Off Button

Selecting the correct program

Operating the Dishwasher

• Load up the dishwasher, and insert the dishwasher tablet.
• Push in the on/off button and check that the program indicator lights come on.
• Check the salt and rinse aid level indicator lights before you start the machine. If necessary add salt and rinse aid.
• Select the required program by referring to the program chart.
• Select the desired program by using the Programme Selection Button.
• Press the start/stop button.
• Close the door then the program starts.
• An audio signal with an interval of 8 seconds warns you to switch your machine off when the selected program ends. This audio signal will warn you 10 times before it turns off.

WARNING! Do not open the dishwasher door whilst the appliance is in operation. However in case, the door is opened while the machine is working, then a safety mechanism ensures the machine immediately stops. The water may be very hot, so be careful!

• Care must be taken if opening the door, as steam and water will escape.
• Press the on/off button after the program is completed. The indicator lights will go off.
• Unload the baskets.

Helpful loading tips

• Place the most difficult to clean items on the bottom rack: pots, pans, lids, serving dishes, and bowls, as shown in the picture.
• Place serving dishes and lids on the sides of the racks in order to avoid blocking the rotation of the top spray arm.
• Use the cutlery grid for cutlery and face sharp objects down to avoid injury.
• Place lighter items on the upper basket.
• Place hollow items face down so they do not collect water.

How to cancel the washing program

To cancel a program while the machine is operating:

• Open the door
  WARNING! Care must be taken when opening the door, as steam will escape.
• Press and hold the start/stop button for 3 seconds.
  The start/stop indicator light will start flashing. Close the door.
• The machine will drain the water inside the machine for 45 seconds.
• The program is canceled when the start/stop indicator light goes off. Then, you can choose and start a new program.

NOTE: Depending on the stage of the program you have canceled, there may be detergent residue or rinse aid
inside the machine and on the load. Make sure the items in the dishwasher are not used before being washed
properly.

How to change the washing program

To change the program selection while the machine is operating:

• Open the door

WARNING! Care must be taken when opening the door, as steam will escape.

• Press the starts/stop button. The indicator light will go off.
• Select the new program. Press the start/stop button. The indicator light will be on and the new program will start.

NOTE: The new program will NOT start right from the beginning. It will start from the stage last carried out by the previous program selection.