RCA 32 INCH LED HD LCD TV User Manual

IMPORTANT SAFETY INSTRUCTIONS

1. Read these instruct ion s.
2. Keep these instructions.
3.  Heed a ll warnings.
4. Follow a ll instruct ions.
5. Do not use ch is apparatus near water
6.  Clean only with dry cloth.
7. Do not block any vent i la tion openings, install in accordance with the instruction s.
8. Do not install near any heat sources such as radiations, heat registers, stoves, or other apparatus (including amplifiers) that produce heat
9.  Do not defeat the safety purpose of the polarized plug. If the provided plug does not fit int o your outlet, consult an electrician for replacement of the obsolete outlet.
10.  Protected the power cord from being walked on or pinched pa rt i cu larly at plugs, convenience receptacles, and the point where they exit from the apparatus.
11. Only use attachments/accessories specified by the manufacturer.
12. Unplug this apparatus during lighting storms or when unused for long periods of time.
13. Refer a ll servicing to qualified service personnel. Servicing is required when the apparatus has been damaged in any way such as power-supply cord or p lug is damaged , liquid has been spilled or objects have fallen into the apparatus, the apparatus has been exposed to rain or moisture, does not operate normally, or has been dropped
14. Mains plug i s used as the disconnect device, the disconnect device sh all remain readily operable.
15. The ventilation should not be impeded by covering the ventilation openings with items  such as newspapers, table-cloth, curtains, etc.
16. No naked flame sources, such as lighted candles, should be p laced on the apparatus.
17. Attention should be drawn to the environmental aspects of battery disposal
18.  The use of apparatus in moderate climate.
19. The apparatus shall not be exposed to dripping or splashing and that no objects filled with liquids, such as vases, shall be placed on the apparatus.

The symbol indicates that dangerous voltage constituting a risk of electric shock are present within  this unit.
The symbol indicates that there are important operating and maintenance instructions in the litcraturuccompanying t his unit.

WARNING
To reduce the risk of fire or electric shock,do not expose this apparatus to rain or moisture.

WARNING 
The batteries shall nol be exposed t o excessive heat such as sunshine, fire or the like.

This symbol indicates that this product incorporates double insulation between hazardous ma ins voltage and user accessible parts.When servicing use only identical replacement parts.

This marking indicates that this product should not be disposed with other household wastes throughout the EU. To prevent possible harm to the environment or human health from uncontrolled waste disposal, recycle it responsibly to promote the sustainable reuse of material resources.To return your used device, please use the return and collection systems or contact the retailer where the product was purchased. They can take this product for environmental safe recycling.

PRECAUTIONS AND REMINDERS

High voltages are used in the operation of this television receiver. Do not remove the cabinet back from your set. Refer servicing to qualified service personnel.

To prevent fire or electrical shock hazard, do not expose the television receiver to rain or moisture.

Do not drop or push objects into the television cabinet slots or openings. Never spill any kind of liquid on the television receiver.

Do not block the ventilation holes in the back cover.
Adequate ventilation is essential to prevent failure of electrical components.

Do not trap power supply cord under the television receiver

If you are going to clean product unplug the tv use soft fabric no water never chemical.

Never Stand on lean on. or suddenly push the  television or its stand .You should pay special attention 10 children. Serious injury may result if it fail.

Do not place your television on an unstable cart stand, shelf or table. Serious injury to an individual ,and damage to the television,may resul1 if i1 falls.

When the television receiver is not used for an extended period of time. it is advisable to disconnect the AC po,ver cord fronl the AC outlet.

Avoid exposing the television receiver to direct  sunlight and other sources of heat. Do not stand the television receiver directly on other products which give off heat.
e.g. video cassette players and audio amplifiers. Do not place naked fla1nc sources. such as lighted candles on the television.

If the television is lo be built into a compartment or similar enclosure, the minimum  distances must be maintained. Heat build up can reduce the service life of your television, and can also be dangerous.

Note: the use of apparatus in moderate climates.

BUTTON CONTROL AND PERIPHERAL CONNECTION

BUTTON CONTROL
OK/
In the standby mode, press the OK/ to turn on the TV. In the boot state, long press the OK/ to shut down. Under the menu page , function equivalent to the OK key.

In the non-menu page, you can adjust the TV channel under the program addition and subtraction; Under the menu page, you can move the cursor up and down.

In the non-menu page,Under the menu page, press the left and right keys to adjust the volume addition and subtraction.

PERIPHERAL CONNECTION

1.  RJ45
2. Coaxial out terminal.
3. HDMI1(ARC) input terminal.
4. HDMI2 input terminal.
5.  HDMI3 input terminal.
6. Audio&Video input terminal.
7. Earphone terminal.
8. LNB IN.
9. RF antenna.
10. USB 1& 2: Connect USB device, such as flash disk.
11. CI slot.
12. .YPbPr(MINI) input terminal.

OPERATING INSTRUCTIONS

USING THE REMOTE CONTROL

Item	Descriptions
Power	Press to turn the tv on or off when your tv is off still flows through it to completely disconnect power unplug the power cord
Google Assistant	Press to open the google assistant or start a voice search.
09 number	Press to enter a TV channel number
INFO	Press to display the channel information.
Guide	Enter electronic program guide. (Used for models with DTV function only)
NETFLIX	NETFLIX
YouTube	Press to open the YouTube.
Google Play	Press to open the Google Play
Prime video	Press to open the prime video
HOME	Press to open the Home Page
MENU	Press to open or close the on-screen menu.
	Press to navigate the on-screen menu.
OK	Enter the selected option or perform the selected operation.
BACK	Return to the previous menu.
EXIT	It depends on the actual function
VOL+/VOL-	Press VOL+ or VOL- to adjust volume level.
CH+/CH –	Press CH+ or CH- to change TV channels.
MUTE	Press to switch the sound on or  off
SOURCE	SOURCE
COLOR BUTTONS	Press to access directly to the corresponding function in APP service.
(reverse)	Press to reverse playback in multimedia & Timeshift mode.
(play)	Press to play in multimedia mode &Timeshift mode.
(forward)	Press to fast forward in multimedia &Timeshift mode.
(Pause)	Press to pause in multimedia mode&Timeshift mode.
(stop	Press to stop multimedia playback, REC& Timeshift mode.
Text	Press to enter the Tele text mode.
SUBT	Open or close subtitle.
AUDIO	O Press to select the DTV audio

INITIAL SETUP

Please according to the Text Tip to First Time Setup. This function is used for the remote control pair code. After the code is successful, you can use the Bluetooth remote control to operate the TV. press and hold “HOME” button and” Left” button Simultaneously for 5 seconds.Then press “OK” button When the “TV_BLE_Remote” displays in the upper right corner of the screen.

HOME SCREEN
During initial setup, press EXIT to exit the initial setup, and enter the HOME screen.

1. Open the google assistant or start a voice search.
2. Among the applications installed on the TV, the icons for the favourite applications are shown inside here. (Favourite applications can be added / deleted / changed its order by users.)
   Apps: Click to jump to Apps screen where all the installed applications are listed.
3. Notification:Display the notification.
   Inputs: Icon to select an input source.
   Network Internet: Icon to set up network such as wifi.
   Settings: Various setting can be configured here.
   For details on the settings, see the next explanation

INPUT SOURCE

1. In the HOME interface, press  to select the “Inputs” icon, press OK to open the input source list, then press up to highlight an input and press OK to switch.
   
   
2. Under live TV, press the SOURCE button to display the list of input sources. You can select the desired source.
   

NAVIGATING THE ON-SCREEN MENU

1. There are two ways to enter. First, in live TV, press the menu button to display TV options, press/  /to select the settings menu and press  the key to select the icon of the circular settings menu, press OK to confirm.
   

1. Press / button to select what you want set.
2. Press OK to enter setting.

Press BACK to return to the previous menu. If the main menu is displayed, pressing BACK will close the onscreen menu.

Network

1.  Press / button to select what you want set .
2. Press OK button to adjust.
3. After finishing your adjustment OK button to save and return to the previous menu.

• Preferred Satellite/General Satellite ­ Set the signal type to Satellite. When set to Satellite, the TV can receive Satellite broadcasting signals.

Auto Channel Update
Parental controls -­ Press / button to select the option then press OK button to enter the sub-menu.
Audio Channel –­ Press /button to select the option then press OK button to enter the sub-menu.
Open source licenses -­ Press/  button to select the option then press OK button to enter the sub-menu.

Antenna

1. Menu->Settings->Channel->Channel Installation Mode enter, choose Antenna.
   
2. Enter Menu->Settings->Channel->Channels..
3. Channel Scan directly enters the ATV+DTV automatic search platform interface of Antenna.
   Update Scan: Re-automatically search for frequency points outside the station.
   

Analog Manual Scan: Manual ATV search station. After input the frequency point, you can select up or down search station.

Single RF Scan: manual search station. Satellite Single RF Scan: DTV manual search, left and right after selecting RF Channel, directly OK search.

Cable

1. Menu->Settings->Channel->Channel Installation Mode, select Cable.
2. Enter Menu->Settings-> channel-> Channels.
   
3. Enter Channel Scan, where Akado, Divan TV, Online and Rostelecom (SPB) are the local operators, and the default Scan Mode is Advance;Others have Advance, Quick and Full Scan modes.

Single RF Scan: manual search station.

Satellite

1. Menu->Settings->Channel->Channel Installation Mode, select Preferred Satellite or General Satellite. Among them, Preferred Satellite has been preset with corresponding satellites of NTV+, Tricolor and Telekarta operators. I’m going to go to General Satellite.
   
2. Enter Menu->Settings-> channel-> Channels->Satelli Re-scan.
   
   
3. Press OK to enter Satellite parameter Settings, which include LNB POWER, LNB Frequency, DiSEqC Set, 22K and other parameters. Then return to Satellite re-scan and right click to enter the search menu.Then return to Satellite re-scan and right click to enter the search menu.
   
   Satellite Add: Add a star broadcast signal.

DEVICE PREFERENCES
ABOUT

3. Press OK to enter Satellite parameter Settings, which include LNB POWER, LNB Frequency, DiSEqC Set, 22K and other parameters. Then return to Satellite re-scan and right click to enter the search menu.Then return to Satellite re-scan and right click to enter the search menu.

Single RF Scan: manual search station.

Satellite

1. Menu->Settings->Channel->Channel Installation Mode, select Preferred Satellite or General Satellite. Among them,
   Preferred Satellite has been preset with corresponding satellites of NTV+, Tricolor and Telekarta operators. I’m going
   to go to General Satellite.
   
   
2. Enter Menu->Settings-> channel-> Channels->Satelli Re-scan.
   
   
   
3.  Press OK to enter Satellite parameter Settings, which include LNB POWER, LNB Frequency,  DiSEqC Set, 22K and other parameters. Then return to Satellite re-scan and right click to enter the search menu.Then return to Satellite re-scan and right click to enter the search menu.
   
   Satellite Add:Add a star broadcast signal.
   
   Satellite Manual Tuning: manually search for a certain TP, which can be added by Satellite Add if needed.

DEVICE PREFERENCES
ABOUT

In this menu, you can read the information and settings of TV.

1. Press / button to select what you want set
2. Press OK button to adjust.
3. After finishing your adjustment press BACK button to return to the previous menu.

DATE&TIME

.

Automatic date & time – Press A. I T button to select the option then press OK button to enter the sub-menu. (Optional:Use network-provided time,Off)

• Manually adjusting date & time settings will automaticall change the Automatic date & time to OFF .

Set date – Press /  button to select the option then press OK button to enter the sub-menu. Set time – Press / button to select the option then press OK button to enter the sub-menu. Set time zone – Press /  button to select the option then press OK button to enter the sub-menu. Use 24-hour format – Press /  button to select the option then press OK button to choose ON/OFF.

TIMER

Power On Timer Type -Press / button to select the option then press OK button to choose ON/OFF/ONCE.
Power On Timer – Press /  button to select the option then press OK button to enter the sub-men u. Power Off Timer Type – Press / button to select the option then press OK button to choose ON/OFF/ ONCE. power Off Timer – Press /  button to select the option then press OK button to enter the sub-men u.

LANGUAGE

Language – Press /  button to select the option then press OK button to enter the select language.

KEYBOARD

Current keyboard – Press / button to select the option then press OK button to enter the sub-menu. Gboard Settings – Press / button to select the option then press OK button to enter the sub-menu. Manage keyboards – Press / button to select the option then press OK button to enter the sub-menu. Power On Timer ­ Press/ button to select the option then press 0, button to enter the sub-menu.

INPUTS

Inputs – Press/ button to select the option then press OK button to enter the sub-menu. HDMI control – Press/ button to select the option then press OK button to choose ON/OFF. Device auto power off- Press / button to select the option then press OK button to choose ON/OFF. TV auto power on – Press / button to select the option then press OK button to choose ON/OFF. HDMI EDID Version – show EDID version. CEC Device List – Press / button to select the option then press OK button to enter the sub-menu.

POWER

Sleep Timer – Press / button to select the option then press OK button to enter the sub-menu. (Optional:off,10 minutes, 20 minutes, 30 minutes, 40 minutes,50 minutes,60 minutes,90 minutes, 120 minutes ). Picture off – Press /  button to select the option then press OK button to choose ON/OFF. Switch off timer – Press /  button to select the option then press OK button to enter the sub-menu. (Optional:off,30 minutes, 60 minutes, 90 minutes, 120 minutes, 150 minutes, 180 minutes, 210 minutes, 240 minutes ) No Signal Auto Power Off – Press / button to select the option then press OK button to enter the sub-menu.(Optional:off,5 minutes,10 minutes,15 minutes,30 minutes,60 minutes

PICTURE

Picture Mode – Press /  button to select the option button to enter the sub-men u. (Optional: user,Standard, Vivid, Sport, Movie, Game, Energy saving). Backlight/Brightness/Contrast/Saturation/HUE/ Sharpness – Press / button to select the option. Press ..,.. to decrease the parameter. Press to increase the parameter.
Gamma –Press / button to select the option then press OK button to enter the sub-men u.(Optional: Dark, middle,Bright).
Color Temperature – Press / button to select the option then press OK button to enter the sub-men u. picture rormat -Press /button to select the option the press OK button to enter the sub-men u.Optional: Automatic/Super zoom/4:3/Movie expand 14:9/Movie expand 16:9/Wide screen/Full/Unscaled) HDR – Press / button to select the option the press OK button to enter the sub-menu .(Optional:on,off).
Advanced Video – Press/  button to select the option then press OK button to enter the sub-menu.
Color Tuner – Press/ button to select the option then press OK button to enter the sub-menu.
11 Point White Balance Correction – Press / button to select the option then press OK button to enter the sub-menu.
Reset to Default – Reset all settings to the factory defaults.

SOUND

Sound style – Press/  button to select the option then press OK button to enter the sub-menu. (Optional: user,Standard,Vivid,Sports,Movie,Music, News). Balance/ Bass/ Treble – Press/  button to select the option. Press to decrease the parameter. Press to increase the parameter.
Sound Surround – Press/ button to select the option then press OK button to choose ON/OFF.
Equalizer Detail – Press / button to select the option then press OK button to enter the sub-menu.
Speakers – Press/ button to select the option then press OK button to enter the sub-menu. (Optional:TV Speaker.External Audio System).
Digital Output – Press/ button to select the option then press OK button to enter the sub-menu. (Optional:Auto, Bypass,PCM,Dolby Digital Plus,Dolby Digital).
SPDIF Delay – Press /button to select the option. Press <II to decrease the parameter. Press / to increase the parameter.
Auto Volume Control – Press/  button to select the option then press OK button to choose ON/OFF.
Downmix Mode – Press/  button to select the option then press OK button to enter the sub-menu (Optional:Stereo,Surround). Reset to Default – Reset all settings to the factory defaults.

STORAGE

Internal shared storage- Press/ button to select the option then press OK button to enter the sub-meo_ui
Removable Storage – Press/  button to select the option then press OK button to enter the sub-menu.( Note:Show external devices if available)

HOME SCREEN

In this menu, you can set channels, apps, open source licenses.
1. Press/  button to select what you want set
2. Press OK button to adjust.
3.After finishing you r adjustment, Press SACK button return to t he previous menu.

STORAGE

Storage mode press / button to select the option the press OK button to choose ON/OFF HOME SCREEN

GOOGLE

In this menu, you can set searchable apps, safe search filter block offensive words open  source licenses.

1.  Press / button to select what you want set.
2. Press OK button to adjust.
3. After finishing your adjustment press BACK  button return to the previous menu

CHROMECAST BUILT-IN

In this menu.you can read the information and settings of Chromecast

1. Press/ button to select what you want set
2. Press OK button to adjust
3.  After finishing your adjustment Press BACK button return to the previous menu.

SCREEN SAVER

Screen saver – Press/ button to select the option then press OK button to enter the sub-menu. (optional: turn screen off backdrop colors)
When to Start – Press/ button to select the option then press OK button to enter the sub-menu. (Optional:5 minutes, 15 minutes, 30 minutes,1 hour, 2 hours,).
Put device to sleep – Press/ button to select the option then press OK button to enter the sub-menu. (Optional:30 minutes, 1 hour, 3 hours, 6 hours,12 hours, Never).
Start now – Press / button to select the option then press OK button to enter screen saver.

LOCATION

Location status – Press/  button to select the option then press OK button to enter the sub-menu. (Optional:Use Wi-Fi to estimate location,Off)

USAGE & DIAGNOSTICS

Usage & diagnostic- press/button to select the option OK button to choose ON/OFF .

ACCESSIBILITY

Caption – press/ button to select the  the option then press OK button to choose ON/OFF.
High contrast text – Press/ button to select option then press OK button to enter the sub-menu.

RESET

Press OK button to enter the sub-menu reset-erase everything.

REMOTE & ACCESSORIES

In this menu,you can pair Bluetooth devices.

1. Press the “HOME” and “LEFT” buttons at the bottom of the remote control for 5 seconds.
2. When the LED start to flash release it the remote controller will  send the pairing signal to the TV and display the information of the remote control on the right side of the screen.
3. Press the OK button to display the pairing. If the paired is displayed, the connection is successful.
4. If the couldn’t pair appears, the connection fails. Wait 30 seconds and then press the “HOME” and “LEFT” buttons at the bottom of the remote control for 5 seconds to repeat the previous steps.
5. Press BACK or EXIT button return to the previous menu.

ADD AND USE OF MULTI MEDIA PLAYER

1.  In the HOME interface, select the + icon in the APP column to add the application, and click OK. Press up and down to select the MultiMedia Player application, and click OK to add it to the HOME interface.
2.  Select OK key to enter MultiMedia Player and display Video,Photo,Audio Text.After Inserting the usb flash drive, you can view the corresponding files in the usb flash drive.
   
   The menu may be different depending on when you purchased the TV.

SPECIFICATIONS

HDMI INPUT

COMPONENT VIDEO (YPbPr) INPUT

Due to continuous product development, specifications are subject to change without prior notice.

TROUBLESHOOTING

Please make these simple checks before calling service. These tips may save you time and money since charges for
receiver installation and adjustments of customer controls are not covered under your warranty.

RCA Multimedia Projector

RCA Multimedia Projector

PLEASE READ BEFORE OPERATING THIS EQUIPMENT

This product is manufactured and sold by Curtis International Ltd. RCA, the RCA logo, the two dogs (Nipper and Chipper) logo, are registered  trademarks or trademarks of RCA Trademark Management and are used under license by Curtis International Ltd. Any other product, service, company, trade or product name and logo referenced herein are neither endorsed nor sponsored by RCA Trademark Management or its affiliates.

Important Safety Instructions

1. Read these Instructions.
2. Keep these Instructions.
3. Heed all Warnings.
4. Follow all instructions.
5. Do not use this apparatus near water.
6. Clean only with a dry cloth.
7. Do not block any ventilation openings. Install in accordance with the manufacturer’s instructions.
8. Do not install near any heat sources such as radiators, heat registers, stoves, or other apparatus (including amplifier) that product heat.
9. Protect the power cord from being walked on or pinched particularly at plugs, convenience receptacles, and the point where they exit from the apparatus.
10. Only use attachments/accessories specified by the manufacturer.
11. Unplug this apparatus during lightning storms or when unused for long periods of time.
12. Refer all servicing to qualified service personnel. Servicing is required when the apparatus has been damaged in any way, such as power-supply cord or plug is
    damaged, liquid has been spilled or objects have fallen into the apparatus, the apparatus has been exposed to rain or moisture, does not operate normally, or  has been dropped.
13. Use only with a cart, stand, tripod, bracket, or table specified by the manufacturer or sold with the apparatus. When a cart is used, use caution when moving the cart/ apparatus combination to avoid injury from tip-over.

Additional Warnings and Precautions

1. Do not look directly into the projector light.
2. Don’t touch the project lens.
3. Mains adapter is used as disconnect device and it should remain readily operable during intended use. In order to disconnect the apparatus from the mains completely, the mains plug should be disconnected from the mains socket outlet completely.
4. CAUTION: Use of controls or adjustments or performance of procedures other than those specified may result in hazardous radiation exposure.
5. WARNING: Changes or modified to this unit not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.
6. WARNING: Use of this unit near fluorescent lighting may cause interference regarding use of the remote. If the unit is displaying erratic behavior move away from any fluorescent lighting, as it may be the cause.
7. WARNING: Shock hazard – Do Not Open.
8. Caution and marking information is located at the rear or bottom of the apparatus.
9. WARNING: To reduce the risk of fire or electric shock, do not expose this apparatus to rain, moisture, dripping, or splashing.
10. Objects filled with liquids, such as vases, shall not be placed on the apparatus.

FCC Warning

This device complies with Part 15 of the FCC rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.
NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the
instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of
the following measures:

• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.

In The Box

Remove & Close The Lens Cover

Placing Your Projector

Your projector can be installed in four different configurations ( see picture below):

Front Table:
Select this location with the projector placednear the floor in front of the screen. This is the most common way to position the projector for quick setup and portability.

Front Ceiling:
Select this location with the projector suspended upside-down from the ceiling in front of the screen.
NOTE: A projector mount is required to install the projector in a ceiling

Rear Table:
Select this location with the projector placed near the floor behind the screen.
NOTE: That a special rear projection screen is required.

Rear Ceiling:
Select this location with the projector suspended upside-down from the ceiling behind the screen.
NOTE: A projector mount is required to install the projector in a ceiling. A special rear projection screen is required.

To Reduce Image Distortion

It is recommended to move the projector as close to center of screen

Distance Between The Projector And Screen

Measure the distance between the projector and where you want to position the screen. This is the projection distance.

Placing Your Projector On Ceiling

When installing the projector in the ceiling, please purchase a projector mount recommended by an installation professional and follow the instructions that come with the mount.
Before installing the projector in the ceiling, please check to make sure the ceiling structure can support the weight of the projector and the mount. If in doubt, please ask the advice from an installation professorial.
NOTE: Projector mount and screw(s) not included

Adjust The Vertical Location

Follow below picture to adjust the vertical location

Adjust The Focus And Keystone

Follow below picture to adjust the focus and trapezoidal screen. Adjust the focus by turning the knob while observing the image pixels near the center of the screen. Optimal focus is obtained when the pixels are clearly visible. Depending on the projected screen size, the focus near the screen edges may be less sharp than the screen center. Keystone image is created when the projector beam is projected to the screen in an angle. Keystone correction will restore the distorted image to a rectangular or square shape.

Controls Of Remote

Install / Remove Battery Of Remote

Remove the battery compartment cover on the back of your remote by carefully sliding to open. The battery cover can then be lifted away. Fit the correct
batteries (not included), referring to the polarity markings. Finally, replace the cover.

NOTES:

• Batteries shall not be exposed to excessive heat such as sunshine, fire
  
• Be sure that the batteries are installed polarity correctly.
• Do not mix old and new batteries.
• Only same or equivalent type batteries as recommend are to be used.
• Do not dispose of batteries in fire, battery may explode or leak. Do not try to recharge a battery

Controls Of Projector

1. NETVIGATOR Buttons
2. LENS
3. FOCUS ADJ. Knob
4. TRAPEZOIDAL ADJ. Knob
5. POWER on Indicator
6. DC IN jack
7. POWER Button
8. SOURCE Button
9. RETURN Button
10. MENU Button
11. STANDY indicator
12. IR Window ( Rear Side)
13. IR Window ( Front Side)
14. ANGEL ADJ. Knob
15. EAR PHONE Jack
16.  AV OUT Jack
17. TF Card Slot ( Micro SD Card )
18. HDMI Port
19. USB Port
20. VGA Port

Install Power Adapter

Follow below picture to connect power adapter Connect small end of adapter FIRST. Plug the adapter body to power outlet.

• – Press the button to turn on unit, press again to turn off.
• / SOURCE – Press the button to select input source.
• / MENU – Press the button to enter projector menu.
• – Press the buttons to select screen item of projector menu.
• / EXIT – Press the button to exit the projector menu.
• – Press the buttons to fast search forward and rewind on USB / TF.
• – Press the buttons to search next or previous file on USB / TF.
• VOL+ / VOL – Press the buttons to select correct sound.
• – Press the button to play/pause the connect USB / TF card.
• FLIP – Press the button to rotate / mirror projector screen
• ZOOM – Press the button to select image scale.
• – Press to muting the audio sound of your projector. Press again to resume.

Connect HDMI Show The Image On Projector Screen

Follow below picture to connect HDMI cable and device.

1. Turn off the unit before connect HDMI cable.
2. After connect, press the button to turn on unit and power indicator will light GREEN
3. Press the SOURCE button to HDMI mode and the video of HDMI device will show on projector screen.
4. Press the button to turn off unit power
   

Connect AV Show The Image On Projector Screen

Follow below picture to connect AV cable and device.

1. Turn off the unit before connect AV cable.
2. Use AV cable to connect follow below figure
3. After connect, press the button to turn on unit and power indicator will light GREEN
4. Press the SOURCE button to AV mode and the video of AV device will show on projector screen
5. Press the button to turn off unit power
   

Connect VGA Show The Image On Projector Screen

Follow below picture to connect HDMI cable and device.

1. Turn off the unit before connect VGA cable.
2. Press the button to turn off power of your projector before connection.
3. After connect, press the button to turn on unit and power indicator will light GREEN
4. Press the SOURCE button to VGA mode and the video of VGA device will show on projector screen.
5. Press the button to turn off unit power.
   

Please refer to the following table to adjust the output signal from computer

Connect Audio Output ( Aux Out / Line Out / Earphones)

Follow below picture to connect audio cable and device.

1. Press the button to turn off power of your projector before connection.
2. Use audio cable to connect follow below figure.
3. After connect and turn on both units. Your projector sound from external device now.
4. After using , turn off both unit

Station Amplifier

Install USB Device And Micro Sd Card “TF”

Follow below picture to install USB and TF card Turn off the unit before install USB / TF card.

Using TF Card And USB Playback (Media Player)

Install USB / TF device:

1. Turn off the unit before install USB / TF card.
2. Install the USB device into USB port.
3. After connect, press the button to turn on unit and the power indicator light GREEN.
4. Press the SOURCE button to enter and use buttons to search the MEDIAPLAYER mode.
5. After selection, use buttons to search the MUSIC PHOTO / MOVIE icon and press the  button to enter. If necessary, use the button to select TF card or USB and press the press the button to enter.
6. Use buttons to search the correct file and press the button to preview playback file and press the button of unit or button of remote to start playback.
7. Press button to fast search forward and rewind.
8. Press button to search next or previous file.
9. During playback, press the button to pause and press again to resume.

NOTE: Remove USB / TF device, press the button to turn off power FIRST.

Using Bluetooth Playback

Pairing is the term used when two Bluetooth devices are connected wirelessly for the first time. This allows the devices to see each other and sets up a one to
one communication channel between both devices.

Bluetooth Connection

1. Press the button to turn on unit.
2. Press the button to enter the menu screen.
3. Use the button to select right side menu
4. Use the button to select Bluetooth column.
5. Press the  button to enter Bluetooth menu.
6. Use the button to select “ ON”
7. Turn on your External Bluetooth Speaker and select to Bluetooth pairing mode
8. A few seconds, you hearing “ do” sound that your unit and external Bluetooth speaker connected.
9. After connection completed, the unit sound to External Bluetooth speaker.

Disconnect the Bluetooth

1.  Press the button to enter the menu screen.
2. Use the button to select above menu.
3. Use the button to select Bluetooth column.
4. Press the button to enter Bluetooth menu.
5. Use the button to select “ OFF” that the Bluetooth disconnect.

Using Projector Menu 1.0

Press button to enter projector menu. Press again to previous status

Using Projector Menu 2.0

Press button to enter projector menu. Press again to previous status.

Using Projector Menu 3.0

Press button to enter projector menu. Press again to previous status.

Using Projector Menu 4.0

Press button to enter projector menu. Press again to previous status.

Using Projector Menu 5.0

Press button to enter projector menu. Press again to previous status.

Specifications

LIMITED PRODUCT WARRANTY

This quality product is warranted to be free from manufacturer’s defects in material and workman-ship, provided that the unit is used under the normal operating conditions intended by the manufacturer. Should you have any problem with this product, please and it is highly recommended to visit our website at www.curtisint.com before you take any other steps as we have additional copies of instruction manuals, operating manuals and trouble shooting tips on our website which gives you the answer on most of the questions you could have in operating the unit.

TERMS OF WARRANTY

C.I. Service Dept. warrants this product to be free from defects in materials and workmanship for 90 days on parts and 90 days on labor. If you originally purchased your product more than 90 days ago, a repair fee may apply. Nothing within this warranty shall imply that C.I. will be responsible or liable for any damage to any items placed in this product, whether due to any defect of the product, or its use, whether proper or improper.

EXCLUSIONS

Save as herein provided, C.I. Service Dept. (Canada) or C.I. Service Dept. (USA), there are no other warranties, conditions, representations or guarantees, express or implied, made or intended by C.I. or its authorized distributors and all other warranties, conditions, representations or guarantees, including any warranties, conditions, representations or guarantees under any Sale of Goods Act or like legislation or statue is hereby expressly excluded. Save as herein provided, C.I. Service Dept. (Canada) or C.I. Service Dept. (USA), shall not be responsible for any damages to persons or property, including the unit itself, howsoever caused or any consequential damages arising from the malfunction of the unit and by the purchase of the unit, the purchaser does hereby agree to indemnify and save harmless C.I. from any claim for damages to persons or property caused by the unit.

TO OBTAIN REPAIRS UNDER THE TERMS OF THIS WARRANTY

1. The original purchaser must present a copy of the original bill of sale and the service warranty card.
2. Any alterations, abuse, misuse, battery corrosion or accidental damage voids the warranty.
3.  The warranty does not cover cabinets and accessories.
4. No warranty or insurance contained or set out shall apply when damage or repair is caused by power failure; damage in transit or when moving the unit; improper power supply; use for commercial or industrial purposes; service calls resulting in customer education, etc.
5. The defective product should be mailed to:

DOWNLOAD RESOURCES

• RCA Multimedia Projector [pdf] Instruction Manual Multimedia Projector, RPJ104
• Read more: https://manuals.plus/rca/multimedia-projector-manual#ixzz7dBx4gMqk

FAQ’S

How do I use my RCA home theater projector?

Connect AV Show The Image On Projector Screen
Turn off the unit before connect AV cable.
Use AV cable to connect follow below figure.
After connect, press the button to turn on unit and power indicator will light GREEN.
Press the SOURCE button to AV mode and the video of AV device will show on projector screen.

Does RCA make good projectors?

It is not as bright as others, the graphics are not as defined as others but it pulls its weight and makes for a good quality projector. RCA products are known to be durable and last for a long time so that is a huge plus. The design is compact and very nice, with a nice fabric top, very small and portable.

Is the RCA home theater projector Bluetooth?

Offering exceptional color performance, the RCA RPJ106 Home Theater Projector with Bluetooth delivers immersive experiences. It provides stunning, razor sharp images and true to life colors.

Can you connect your phone to a RCA home theater projector?

You can use an RCA cable, a composite cable which will require separate plug-ins for the sound and the video. Or, you can use an adaptor to connect your smartphone to a VGA port (the same kind that you use to connect a monitor to your PC).

Does RCA projector have speakers?

BUILT-IN ACCESSORIES: Our project is ideal for travel, with its huge lithium battery, built-in handles, and two built-in 8-watt speakers. With our projector, you won’t need to carry another speaker with you to hear what is playing.

Why does my projector have no sound?

These are the most common reasons you may not have sound on your projector: The volume is turned down. Check the volume control on the projector to ensure the volume is turned up. If you are connected to a source device, via HDMI or USB-C, check the volume control on that device as well to ensure it is turned up.

Are projectors better than TVs?

The better projectors also had far better contrast ratios, and therefore better image quality, than most TVs of thVe time. Short-throw projectors can help fit a projector into just about any room but they can still look washed out in brighter lighting. Life moves pretty fast. Technology even more so.

How do I get my TV to play sound through my home theater system?

Connect a Coaxial Digital Cable, Optical Digital Cable, or Audio cable to the Audio Output jack on your TV. Connect the other end of the cable to the corresponding jacks on the A/V receiver or home theater system. Depending on your device, the audio input may be labeled TV INPUT or VIDEO INPUT.

Do projectors use a lot of electricity?

A standard projector uses anywhere from 150-800 watts per hour, with the average coming in at around 300. In comparison, TVs average between 80-400 watts per hour.

Is projector better for eyes than screen?

Screens like TVs produce eye-damaging direct blue light. A projector’s Indirect light – even its indirect blue light – is much gentler on the eyes. Along with other safety features which you can learn about below – projectors are the best option based strictly on eye health.

Do projectors give off blue light?

Blue light is a light wavelength not only found in natural sunlight. It’s also found in anything emitting light such as fire, TVs, computer screens, light bulbs, LEDs, and projectors.

How do I stop my projector from lighting?

So, you can draw your room out, place the projector in the room, and draw the lines to the screen. If you are sitting under the projector, you will NEVER have an issue if you just sit down. If you are a few feet in front of the projector, then when seated you still shouldn’t have an issue.

RCA Multimedia Projector
www://rca.com/

Congratulations on your purchase of this 3-device RCA Universal Remote Control. This remote features a library of codes with the latest devices of all major brands, with support for streaming media players as well. The navigation keys have been redesigned to function seamlessly with the more sophisticated menu and guide systems found in today’s home entertainment devices.

Step 1: Install your batteries

Your universal remote requires two AA alkaline batteries (batteries may or may not be included, depending on model).

To install the batteries: 

1. Remove the battery compartment cover.
2. Insert the batteries, matching the batteries to the (+) and (–) marks inside the battery compartment.
3. Push the battery cover back into place.

Battery Precautions: 

• Do not mix old and new batteries.
• Do not mix alkaline, standard (carbon-zinc) or rechargeable (nickel-cadmium) batteries.
• Always remove old, weak or worn-out batteries promptly and recycle or dispose of them in accordance with Local and National Regulations.

Battery Saver 

Your universal remote control saves battery power by automatically turning off if any key is pressed for more than 60 seconds. This saves your battery life should your remote get stuck in a place where the keys remain depressed, such as between sofa cushions.

Step 2: Program your remote

To use this universal remote with your home entertainment system, first you need to program it to control your devices. There are four ways you can program the universal remote to operate your devices. Try them in the order listed here:

• The Brand Code Search searches through the codes for select brands of devices.
• The Direct Code Entry lets you enter a code from the accompanying code list for your brand of device.
• The Auto Code Search goes automatically through all the codes for the device you’re trying to control.
• The Manual Code Search lets you manually go through all the codes for the device you’re trying to control.

Brand Code Search 

The Brand Code Search goes through only the codes for one of the select brands listed in the accompanying code list. If your brand of device is listed, this search can be very quick and easy.

TIPS: Each device key is associated with a type of device— the TV is preset to search for TVs, SAT•CBL•STREAM for satellite receivers, cable boxes, digital TV converters, or streaming media players and DVD•VCR for VCRs or DVD players.

The POWER key serves as an indicator light duringprogramming, giving you feedback at each stage of the process.

To exit without saving a new code at any point in the Brand Code Search, press the GO BACK key

1. Manually turn on the device you want to control.
   
2. If you’re programming the TV or SAT•CBL•STREAM key, go to step 3.
   If you’re programming the DVD•VCR key, you need to tell the remote which kind of device you want this key to control, VCR or DVD.
   Press and hold the DVD•VCR key. While you’re holding down the DVD•VCR key, use your other hand to press the number key for the type of device you want to control with this key: 2 for VCR, 3 for DVD.
   
3. Find your device’s brand in the Brand Code list section of the accompanying code list. Circle the number for your brand and keep the list handy.
   
4. Press and hold the device key you want to program. While you’re holding down the device key, use your other hand to press and hold the remote’s POWER key at the same time.
   
5. Wait until the POWER key comes on and stays on. Then release both keys.
6. Look at the number you circled for your device’s brand code number. Press that number on the remote keypad.
7. Point the remote directly at the front panel of the device you want to control. Press POWER on the remote and wait 2 seconds. The remote is testing a single code for  your device’s brand.
   
   Did your device turn off?
   YES: Press the STOP key to store the code. You’redone! You’ve programmed this device key. NO: Press POWER again. The remote tests the next code for your brand.
   Keep pressing POWER every 2 seconds until your device turns off. When it does, press STOP.

NOTES
Throughout the programming of each key, be sure to keep the remote pointed at the IR sensor of the device you are currently programming the remote to control. Test the remote with the device to make sure the device key is programmed with the correct code for maximum functionality. If some features don’t work, try a different code. See the “Testing the Code for Maximum Functionality” section below for more information. During the Brand Code Search, the remote ignores  key presses that aren’t part of the search.

The search times out after two minutes (the POWER key blinks four times and turns off, and the last programmed code under that device key is retained).

The POWER key blinks four times and turns off when the remote has gone through all the codes. The remote exits the Brand Code Search. If your device hasn’t turned off yet, try a different search method.

Testing the Code for Maximum Functionality 

1. Try a variety of the device’s functions with the remote. If some device features don’t work, go to the next step to try a different code.
2. Repeat the Brand Code Search from the beginning. When the device turns off for the first time, don’t press the STOP key, which would store the same code. Instead, with the unit now off, continue to press the POWER key repeatedly until the unit turns back on.
3. Once the unit turns back on, you have found another code that operates the device. Press the STOP key.
4.  Test the key’s functionality again by attempting to control a variety of the device’s functions. If the code that has been stored controls the majority of the device’s functions, programming is complete. If the code stored does not give maximum functionality, try another code.

Direct Code Entry

Direct Code Entry lets you enter a code from the accompanying code list for your brand of device. It’s not as easy as the other methods, but it’s potentially the fastest method.

TIP: Each device key is associated with a type of device—the TV is preset to search for TVs, SAT•CBL•STREAM for satellite receivers, cable boxes, digital TV converters, or streaming media players, and DVD•VCR for VCRs or DVD players.

The POWER key serves as an indicator light during programming, giving you feedback at each stage of the process.

1. Manually turn on the device you want to control.
   
2. Find the Code List that came with the remote. Locate the section for the type of device you’re trying to program, and find your brand in that section. Circle the codes for your brand and keep them handy.
3. Press and hold the device key you want to program (the POWER key comes on). While you’re holding down the device key, use your other hand enter the first five-digit code for your brand in the code list (the POWER key goes off after the first digit).
   
4. When you’ve fi nished entering the fi ve-digit code, keep holding down the device key and look at the POWER key.
   Is the POWER key on?
   YES: You’re done! You’ve programmed this device key. NO, it blinked four times and turned off: You have either entered a code number that is not in the code lists or missed a step in the code entry procedure. Try step 3 again.

NOTES
Remember to enter the code for future reference in the box provided in the Code Retrieval section of this manual. If your brand isn’t listed in the code list, use one of the Code Search methods to program the remote control. (Refer to the Auto and Manual Code Search methods.)

If you release the device key any time during the Direct Code Entry procedure, the POWER key blinks four times, and the process is exited. The last programmed code under the device key is retained.

Test the remote with the device to make sure the device key is programmed with the correct code for maximum functionality. If some features don’t work, try a different code in the list.

Auto Code Search

The Auto Code Search goes automatically through all the codes for the device you’re trying to control. When you find the one that operates your device, you can stop the search and store that code.

TIPS: Each device key is associated with a type of device—the TV is preset to search for TVs, SAT•CBL•STREAM for satellite receivers, cable boxes, digital TV converters, or streaming media players, and DVD•VCR for VCRs or DVD players.

To exit without saving a new code at any point in the Auto Code Search, press the GO BACK key.

1. Manually turn on the device you want to control.
   
2. If you’re programming the TV or SAT•CBL•STREAM key, go to step 3. If you’re programming the DVD•VCR key, you need to tell the remote which kind of device you want this key to control, VCR or DVD. Press and hold the DVD•VCR key. While you’re holding down the DVD•VCR key, use your other hand to press the number key for the type of device you want to control with this key: 2 for VCR, 3 for DVD.
   
3. . Press and hold the device key you want to program. While you’re holding down the device key, use your other hand to press and hold the remote’s POWER key  at the same time.
   
4. Wait until the POWER key comes on and stays on. Then release both keys.
5. Point the remote directly at the front panel of the device you want to control. Press PLAY on the remote and wait 5 seconds. The remote is testing a batch of 10 codes on your device.
   
   Did your device turn off?
   YES: Go to step 6.
   NO: Press PLAY again. The remote tests the next batch of 10 codes.
   Keep pressing PLAY every 5 seconds until your device turns off.
6. When your device turns off, press the REVERSE key on the remote and wait at least 2 seconds. The remote tries the last of the previous ten codes.
   
   Did your device turn on?
   YES: Press the STOP key. You’redone! You’ve programmed this device key.
   NO: Press REVERSE again. The remote tests the next code in the batch.
   Keep pressing REVERSE every 2 seconds until your device turns back on. When it does, press STOP.
   Note: If you accidentally press the REVERSE key after your device turns on, press the FORWARD key. Then, wait two seconds to see if your device turns off again.

NOTES
Throughout the programming of each key, be sure to keep the remote pointed at the IR sensor of the device you are currently programming the remote to control.

Test the remote with the device to make sure the device key is programmed with the correct code for maximum functionality. If some features don’t work, try a different code. See the “Testing the Code for Maximum Functionality” section below for more information. During the Auto Code Search, the remote ignores key presses that aren’t part of the search.

The search times out after two minutes (the POWER key blinks four times and turns off, and the last programmed code under that device key is retained).

The POWER key blinks four times and turns off when the remote has gone through all the codes. The remote exits the Auto Code Search. If your device hasn’t turned off  yet, try a different search method.

Testing the Code for Maximum Functionality 

1. Try a variety of the device’s functions with the remote. If some device features don’t work, go to next step to try a different code.
2. Repeat the Auto Code Search Method from the beginning. When your device turns off, do not stop searching. Instead, with the unit now off, continue to press the PLAY key every 5 seconds until the unit turns back on.
3. Once the unit turns back on, press the REVERSE key on the remote every 2 seconds until your device turns off again. When your device turns off again, press the STOP key.
4. Test the key’s functionality again by attempting to control a variety of the device’s functions. If the code that has been stored controls the majority of the device’s functions, programming is complete. If the code stored does not give maximum functionality, try another code.

Manual Code Search

The Manual Code Search lets you go one-by-one through all the codes for the device you’re trying to control. When you fi nd the one that operates your device, you can stop the search and store that code.Actual model may vary from illustration

TIPS: Each device key is associated with a type of device—the TV is preset to search for TVs, SAT•CBL•STREAM for satellite receivers, cable boxes, digital TV converters, or streaming media players, and DVD•VCR for VCRs or DVD players.

The POWER key serves as an indicator light during programming, giving you feedback at each stage of the process.

The Manual Code Search method may take a long time because the remote searches through all of the codes in its memory one-by-one. If your brand is listed in the Brand Codes or the Code Lists, first try the Brand Code Search or the Direct Code Entry method.

To exit without saving a new code at any point in the Manual Code Search, press the GO BACK key

1. Manually turn on the device you want to control.
   
2. If you’re programming the TV or SAT•CBL•STREAM key, go to step 3. If you’re programming the DVD•VCR key, you need to tell the remote which kind of device you want this key to control, VCR or DVD. Press and hold the DVD•VCR key. While you’re holding down the DVD•VCR key, use your other hand to press the number key for the type of device you want to control with this key: 2 for VCR, 3 for DVD.
   
3. Press and hold the device key you want to program.While you’re holding down the device key, use your other hand to press and hold the remote’s POWER key at the same time.
   
4. Wait until the POWER key comes on and stays on. Then release both keys.
5. Point the remote directly at the front panel of the device you want to control. Press POWER on the remote and wait 2 seconds. The remote is testing a single code for your device.
   
   Did your device turn off?
   YES: Press the STOP key to store the code. You’re done! You’ve programmed this device key. NO: Press POWER again. The remote tests the next code for your device.
   Keep pressing POWER every 2 seconds until your device turns off. When it does, press STOP.
   TIP: Because there are so many codes, you may have to press the POWER key many times—possibly hundreds of times.
   CHAN and VOL keys act as channel and volume controllers. The CHAN keys also provide skip forward and skip back control for DVD players and DVRs that support this functionality.

GO BACK exits remote programming; it also performs the same functions as on your original remotes.

The INPUT and — (dash) key has three functions: (1) it toggles through all the video sources connected to your TV; (2) when the remote is in VCR mode, this button toggles between VCR and the TV input; (3) when you’re entering digital channel numbers directly, this button lets you separate the main channel number from the sub-channel number (such as 59.1).

IMPORTANT

Because this remote controls more than one device,you must first “tell” the remote which device you wish to operate. That means, if you wish to operate your TV, you must first press the TV key to put the remote in the TV Mode. The remote stays in that device mode until you press a different device key. For example, if your remote is in TV Mode and you want to operate the DVD player, you must press the DVD•VCR key to change device modes.

Backlighting

Backlight illumination helps you see the remote control keys better in the dark. You can turn backlight illumination on or off by pressing the LIGHT key ( ). Backlighting stays on as long as keys are being pressed and turns off six seconds after the last keypress. Once the backlight time has timed out, any keypress will reactivate it. If the backlight illumination is on, and you press the backlight key, the backlight turns off.

Advanced Functions

Code Retrieval

Once you’ve programmed the remote to control your devices, you may want to record the codes for future reference. If you used the Direct Code Entry method, this is easy. Just find the codes you entered and make a note of them in the boxes below. If you used one of the Code Search methods to program your remote or if you used the Direct Entry method but don’t remember the code, you will need to retrieve each device’s fi ve-digit code. Retrieving the actual code and writing it down will save you time if you ever need to program the remote again (e.g., if programming is lost when you change the batteries). If the codes are recorded, you can use the Direct Entry method to reprogram your remote to control your devices, which is quick and easy

1. Press and hold the device key (TV, SAT•CBL•STREAM, DVD•VCR) whose code you wish to retrieve. The POWER key turns on. Keep pressing the device key.
2. While holding the device key down, press and hold the INFO-OPTIONS key. The POWER key turns off. After holding down both keys for three seconds, the POWER key turns back on.
3. Release both keys. The POWER key remains on.
4. Starting with the number 1 key, press and release each number key on the keypad in the following order: 1-9, then 0. The number that causes the POWER key to blink is the fi rst number of the code. As you find each number of the code, write it down for future reference.
   Note: All TV codes begin with the number 1; all VCR and DVR codes begin with the number 2; all DVDs, the number 3; and all satellite receivers, cable boxes, streaming players, and DTV converters, the number 5.
5. Repeat step 4 until you have retrieved all fi ve numbers in the code. After the fi fth number is retrieved, the POWER key blinks briefl y, then turns off.
   TIP: To exit the Code Retrieval Mode at any time, press the GO BACK key.
   Note: If you press an invalid key during the Code Retrieval process, the remote will not respond. If you do not press a valid Code Retrieval key (TV, SAT•CBL•STREAM, DVD•VCR, INFO-OPTIONS, GO BACK), Code Retrieval times out after 15 seconds. The POWER key blinks four times, and then turns off.

Troubleshooting

Problem: The remote does not operate your device.

• Make sure the remote is in the correct mode by pressing the corresponding device key (TV, SAT•CBL•STREAM, DVD•VCR). This tells the remote which device to operate.
• Remove any obstacles between the remote and the device. Make sure you’re aiming the remote at the device’s IR sensor.
• Make sure the batteries are fresh and are properly installed. Replace the batteries with two new AA batteries, if necessary (see the Battery Installation section)

Problem: The remote can’t be programmed to operate your device.

• If you are testing the remote while programming it, you may be too far away from the device or at a wrong angle. There must be an unobstructed path between the remote and the IR sensor on the device. Move closer and make sure you point the remote at the device you’re trying to control.
• If you’re using the Direct Entry programming method to enter the codes for your brand and the unit is still not functioning properly, try the auto, brand, or manual search method.
• To control combo units, like TV/VCRs or TV/DVDs, you must program the individual corresponding device keys to control each part of the combo unit. Once programmed successfully, the TV key controls the TV functions, and the DVD•VCR key controls the VCR or DVD functions.
• Make sure the batteries are fresh and are properly installed.

Problem: The remote doesn’t perform commands properly. 

• Make sure the remote is in the correct mode by pressing the corresponding device key (TV, SAT•CBL•STREAM, DVD•VCR). This tells the remote which device to operate.
• Make sure device is ready (for example, the DVD player has a disc loaded).
• You may have pressed an invalid key for the mode the remote is in.
• If you’re trying to enter a channel number directly, try pressing the OK key after entering the channel number as this is a requirement of certain models and brands.
• There is a possibility that a programmed code may only be able to control some of your device features (for example, only turns a device on and off). To confirm that the device key is programmed with the correct code for maximum functionality, test the device. Attempt to control a variety of the device’s functions with the remote. If some of the features of your devices don’t work, try programming the remote with a different code in the list using the Direct Code Entry Method, until you fi nd the code that allows the remote to control the majority of your device’s functions. Different codes can provide different levels of functionality.

Problem: The POWER key does not light when you press a key

• You may have pressed an invalid key for the mode the remote is in.
• Make sure the remote is in the correct mode by pressing the corresponding device key (TV, SAT•CBL•STREAM, DVD•VCR). This tells the remote which device to operate.
• Make sure the batteries are fresh and are properly installed. Replace the batteries with two new AA batteries, if necessary (see the Battery Installation section).

Problem: The remote will not change channels on device. 

• Make sure the remote is in the correct mode by pressing the corresponding device key (TV, SAT•CBL•STREAM, DVD•VCR). This tells the remote which device to operate.
• Press the OK key after you enter a channel number.
• Remove any obstacles between the remote and the device. Make sure to aim the remote at the IR sensor on the device.

Problem: The device’s menu does not appear on the TV screen

• Make sure you have connected the device to your TV properly and selected the correct input. (See your devices’ Owner’s Manuals for proper connection procedures.)
• Make sure the remote is in the correct mode by pressing the corresponding device key (TV, SAT•CBL•STREAM, DVD•VCR). This tells the remote which device to operate.
• Menu access isn’t supported for all brands. You may need to use your original remote control to access menu functions for some devices.

Care and Maintenance

• Keep the remote dry. If it gets wet, wipe it dry immediately.
• Use and store the remote only in normal temperature environments.
• Handle the remote gently and carefully. Don’t drop it.
• Keep the remote away from dust and dirt.
• Wipe the remote with a damp cloth occasionally to keep it looking new.
• Modifying or tampering with the remote’s internal devices can cause malfunction and invalidate its warranty.

Limited Lifetime Warranty

VOXX Accessories Corporation (the “Company”) warrants to you the original retail purchaser of this product that should it, under normal use  and conditions, be proven defective in material or workmanship during its lifetime while you own it, such defect(s) will be repaired or replaced (at the Company’s option) without charge for parts and repair labor. To obtain repair or replacement within the terms of this Warranty, the product is to be delivered with proof of warranty coverage (e.g. dated bill of sale), specification of defect(s), transportation prepaid, to the Company at the address shown below.

This Warranty does not cover product purchased, serviced or used outside the United States or Canada. This Warranty is not transferable and does not extend to costs incurred for installation, removal or re installation of the product. This Warranty does not apply if in the Company’s opinion, the product has been damaged through alteration, improper installation, mishandling, misuse, neglect, accident, or the simultaneous use of different battery types (e.g. alkaline, standard or rechargeable).

THE EXTENT OF THE COMPANY’S LIABILITY UNDER THIS WARRANTY IS LIMITED TO THE REPAIR OR REPLACEMENT PROVIDED ABOVE AND, IN NO EVENT, SHALL THE COMPANY’S LIABILITY EXCEED THE PURCHASE PRICE PAID BY PURCHASER FOR THE PRODUCT

This Warranty is in lieu of all other express warranties or liabilities. ANY
IMPLIED WARRANTIES, INCLUDING ANY IMPLIED WARRANTY OF
MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE SHALL BE LIMITED TO DURATION OF THIS WARRANTY. IN NO CASE SHALL THE COMPANY BE LIABLE FOR ANY CONSEQUENTIAL OR INCIDENTAL DAMAGES WHATSOEVER. No person or representative is authorized to assume for the Company any liability other than expressed herein in connection with the sale of this product.

Some states/provinces do not allow limitations on how long an implied warranty lasts or the exclusion or limitation of incidental or consequential damage so the above limitations or exclusions may not apply to you. This Warranty gives you specific legal rights and you may also have other rights, which vary from state/province to state/province.

FCC Statement: 

This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. Note: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules.  These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help. Caution: Any Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate this equipment.

Industry Canada Regulatory Information 
This class B digital apparatus complies with Canadian ICES-003
SAVE THIS MANUAL AND THE CODE LISTS!
Remote controls can sometimes lose their programming when you change the batteries. Make sure you keep the manual and code lists in a safe place so that you can reprogram the remote if you need to

Code Lists

Brand Codes are used for programming using the Brand Code Search and Entry method outlined in the User’s Guide.

Troubleshooting

The modem lights indicate the current status of your cable modem. To troubleshoot any connection problems, use the table below.

By pressing the Internet On/Off button, it puts the modem in stand-by mode. While in stand-by mode, the cable Activity LED is off, and the connection to the Internet is lost.

Troubleshooting

The modem lights indicate the current status of your cable modem. To troubleshoot any connection problems, use the table below.

By pressing the Internet On / Off button, it will put the modem in standby mode. In standby mode, the Cable Activity LED will be off, and the connection to the internet will be lost.