RATTAN SOFA SET INSTRUCTIONS

WF199116AAA, WF199117AAA, WF199118AAA
OR
WF199116AAC, WF199117AAC, WF199118AAC

Note:

1. 50% Tighten before fixing all screws, Allen wrench is recommended instead of an electric drill.
2. Place the item on a flat ground to adjust and make sure it remains stable.
3. Tighten up all screw with tools gradually.
4. If screw are not aligned with holes furring assembly, please loosen all the other screws to 50% and continue the assembly process.
5. If the item is not stable, please loosen all screws, adjust it on a flat ground and tighten up all screws again.
6. Note: If one or some screws are fully tighten during assembly, chances are the others will not be aligned with holes. In addition, all the holes are designed to be relatively larger to provide more space for the adjustment of the screws.

Note:

1. 50% Tighten before fixing all screws, Allen wrench is recommended instead of an electric drill.
2. Place the item on a flat ground to adjust and make sure it remains stable.
3. Tighten up all screw with tools gradually.
4. If screw are not aligned with holes furring assembly, please loosen all the other screws to 50% and continue the assembly process.
5. If the item is not stable, please loosen all screws, adjust it on a flat ground and tighten up all screws again.
6. Note: If one or some screws are fully tighten during assembly, chances are the others will not be aligned with holes. In addition, all the holes are designed to be relatively larger to provide more space for the adjustment of the screws

CARTON CONTENT

Part List

Hardware

ASSEMBLY

STEP 1
Use Allen key to loosen Bolt on the side of Back Corner Frame (B) about 10 mm.

STEP 2
Connect part from STEP 1 & Right Frame (A) with Bolt (1) & Washer (3).

STEP 3
Connect part from STEP 2 & Seat Corner Frame (C) with Bolt (2) & Washer (3).

STEP 4
Connect part from STEP 3 & Right side Corner frame (D) with Bolt (1) & Washer (3).

STEP 5
Connect part from STEP 4 & Right front Corner frame (D) with Bolt (1) & Washer (3).

STEP 6
Connect part from STEP 5 & Leg (5) with Bolt (1).

STEP 7
100% Tighten

STEP 8
Put on Seat cushion (F) & Pillow Big Cushion (G) & Pillow Small Cushion (H) to complete the Right Corner

STEP 9
Use Allen key to loosen Bolt on the side of Back Corner Frame (B) about 10 mm.

STEP 10
Connect part from STEP 9 & Right Frame (A) with Bolt (1) & Washer (3).

STEP 11
Connect part from STEP 10 & Seat Corner Frame (C) with Bolt (2) & Washer (3).

STEP 12
Connect part from STEP 11 & Left side Corner frame (I) with Bolt (1) & Washer (3).

STEP 13
Connect part from STEP 12 & Left front Corner frame (J) with Bolt (1) & Washer (3).

STEP 14
Connect part from STEP 13 & Leg (5) with Bolt (1).

STEP 15
100% Tighten

STEP 16
Put on Seat cushion (F) & Pillow Big Cushion (G) & Pillow Small Cushion (H) to complete the Left Corner

STEP 17
Connect Seat Middle Frame (T) & Front Middle Frame (U) & Left side Corner frame (I) & Right side Corner frame(D).

STEP 18
Connect part from STEP 17 & Back Middle Frame (S) with Bolt (1) (2) & Washer (3).

STEP 19
Connect part from STEP 18 & Leg (5) with Bolt (1).

STEP 20
100% Tighten

STEP 21
Put on Seat Cushion (F) & Pillow Big Cushion (G) to complete the Middle

STEP 22
Connect Seat Stool (M) & Front Stool Frame (K) & Side Stool Frame (L) with Bolt (1) & Washer (3)

STEP 23
Connect part from STEP 22 & Leg (5)with Bolt (1).

STEP 24
100% Tighten.

STEP 25
Put on Stool Cushion (N) to complete the Stool

STEP 26
Connect Table Top (Q) & Front Table Frame (O) & Side Table Frame (P) with Bolt (1) & Washer (3).

STEP 27
Connect part from STEP 26 & Leg (5) with Bolt (1).

STEP 28
100% Tighten

STEP 29
Put on Glass (R) to complete the Table.

OPTION 1: LEFT CORNER

Connect Right & Left Corner, 2 Middle & Stool with Connector (6)

OPTION 2: RIGHT CORNER

Connect Right & Left Corner, 2 Middle & Stool with Connector (6)