QCY
TWS Bluetooth Earphones
Model: QCY-Q29

Startup

A. Pick up and assemble one among them

Middle size ear tip is suggested to try first as It suits most people

B. How to wear

Adjust its end towards mouth

Mono Mode – Manual Pairing
(Mono Mode either of the two units can be used Independently)

Main unit(R) will enter pairing mode once switched on (red and white Indicator lashes slowly) Hold MFB for is and Auxiliary unit(L) will enter pairing mode(red and white indicator Hashes slowly) Activate Bluetooth function on the phone, search and touch the pairing name to connect Pairing name: Left earphone(QCY-Q29L) Right earphone (OCY-Q29_R)

Stereo Mode -Maiden Using
(Stereo Mode: Connect the two units In series then use them as a pair of stereo earphone)

1. ‘fear off the stickers of both un s, then put the units Into the charging dock activating hem.
2. Get the main one out of the doc ,turn on cellphone’s Bluetooth facility to search for QCY-029_R and touch It to connect
3. Pull the auxiliary unit(L) up then move the unit approaching the main one

Stereo Mode -Manual Pairing
(When the two units fail to pair with each other)

1. Pair the main unit(R) with cellphone at first
2. Turn the main one off when the process 1 is done successfully
3. Hold QCY button sof both unhurt. white indicator are on
4. Wait them to connect with each other

Stereo Mode – Manual Pairing(Alternative)
1. Take two units out and peel away their stickers. In power-off status, hold MFBs of the two units for 8s to enter pairing mode(white light is on constantly). Then, two units will be paired automatically in approximately 5s. At Met, switch off the main unit(P) and the auxiliary unit(l) will be turned off automatically.

2. Hold MFB of the main unit(P) for 5s to enter searching mode(red and white light blinks alternately). Then turn on Bluetooth facility on cellphone to search for “(10,02g _R’ and touch It to pair.

3. Switch on the auxiliary unit(3) by holding Its MFB for 3s( white light blinks). Approach it to the main unit(B). Then, both units will be paired with each other automatically In

Notes: If the main unit (PI have been connected with a Bluetooth device butte auxiliary unit(L)can not be connected with the main unit(13)automatically(two units fall to connect with each other), please switch off both of them then hold their MFBs together for appropriately Be to enter pairing mode.

Charging
Red Indicator will flash with voice prompt to imply the condition of low battery (White light Is on to show charging status while off, full charged)
Note: Red Light will flash when the earphone is inserted in the dock which means the connection works well.

Put the units inside (charging contacts should be set Properly)

Charging for the Dock
Red indicator will be on when the dock Is charging, When it is full charged, blue indicator will be on instead

Charge It by USB cable

Mono Mode
Power-on
Hold MFB for roughly 3s(white light will be on) If the unit is charging in the dock, it will be activated whenever you take it out

Power-off
Hold MFB for roughly 3s(red light will be on)

Reject a call
Hold MFB for is to reject an incoming call

Answer a call
Press MFB to answer an incoming call Press it again to end

Redial
The last outgoing call Double press ME8 during stand-by

Mute
Double press MFR when you are on the call

Three-way Talking
Activate call waiting facility on your phone(for more details please refer your phone’s manual).

1. Whenever you are on the phone and there is an incoming call at the same time, please press MFB to answer the second one.
2. Supposing you have two incoming calls at the same time, the first one is talking while the second is holding, you may switch their statuses by double pressing MFB.

Pause/Resume Press
MFB to nausea resume when single unit is connected with cellphone.

Voice Control
Hold MFB for is to activate voice assistant.ilike Sid)

Switch Voice between Earphone and Cellphone Hold MFB for 1s to switch during calling.

Re-connection with cellphone in mono mode When single unit is power-of-tat first switch it on(white light Is on) then press MFB to re-connect with the last cellphone once connected(the unit has to be connected before)

Stereo
Mode Power-on Hold MPH for roughly 3s(white light will be on) If the units are charging In the dock, they will be activated whenever you take them out

Power-off
Two units are in series connection while the main unit(R) is connected with cellphone, hold MFB of either of them for about 4s, they will be switched off at the same time (red lights are on)

Media Sharing between two Units
Two units are in series connection while the main unit(R) is connected with cellphone, press MFB of either of them to play or pause music and you can enjoy songs by both units together Note: Only the main unit(R) is available to answer a call

How to Connect Units in Series and Share Media

1. When the main unit(R) Is charging In the dock, It will be activated and re-connect with cellphone by itself soon as you take It out from the dock. Pull the auxiliary unit(L) up and It will be tumed on and re-connect with the main unIt(R).
2. Suppose that two units fail to connect with each other, connect the main unit(R) with cellphone and play music then press MFB of the main unit)R) three times so as to re-connect It with the auxiliary unit(1).

After Service and Support
Warranty period:
12 months following the purchase date.

Free service:
Under warranty, if there is any breakdown caused by manufacturing defects, please contact our dealers to enjoy free maintenance. You will always need this Warranty Card and your receipt or other proof of purchase to claim warranty

Free maintenance won’ t be available under the followingcircumstances:

1. Without Warranty Card or intact maintenance label.
2. Damage caused by Improper disassembly or repair.
3. Damage resulting from liquid or dropping, and other artiflcialmechanical defects
4. Damage caused by any force majeure

Lifespan:
As the booklet states, the eco-Iffespan of the item is 5 years while using It in normal ways. During the period, no dangerous material will be leaked. The item mustberecyded bythelocal law.

Tips

1. Before using the headset, please read the manual carefully and keep it for future references.
2. The headset need to be fully charged prior to first-time
3. If the headset is left unused for over two weeks, please recharge it periodically.
4. Please use the chargers made by qualified manufacturer.
5. 1f the headset cannot be found by your phone, please check whether it is in pairing mode; if left unconnected for a long while, the headset will exit pairing mode, please re-enter the mode; If a procedure error of your phone occurs, reboot it; if a procedure error of the headset occurs, reboot or reset it.
6. If the two units can not connect with each other automatically when switched on. Please hold the MFB of both units until the white light Is on then move them approaching each other and wait for the connection completed.

Caveats

1. Never disassemble or modify your headset for any reasons to avoid any damages and danger.
2. Do not store the headset In extreme temperatures (under 0°C or over 45°C).
3. Avold using the indicator dose to the eyes of children or animals.
4. Do not use this headset during a thunderstorm to avoid Irregular function and increased risk of electric shock.
5. Do not use harsh chemicals or strong detergents to clean the headset.
6. Keep the headset dry.

Notes: Please arrange using time properly since your hearing may be damaged by using the device for a long time.

For any after service, please contact QCY customer-service

Perform standard: Q/HL 1-2016
Web: www.qcybluetooth.corn
Manufacturer. Dongguan Hele Electronics Co., Ltd.
Address: Dalingya Industrial Zone, Daojlao Town. Dongguan City, Guangdong ProWnce(QCY Environmental Zone,Dayaling No.S, Yuehui Road)

QCY T7 TWS True Wireless Earbuds User Manual

QCY T7 TWS True Wireless Earbud Feature

Feature

Listen!

• That’s the Sound of My Heart
• HIFI Wearing detection | Pairing animation | Smart App
• T7 TWS Music Earbuds
• 13mm big driver HIFI sound quality
• Wearing detection Hall switch Smart in-ear sensor
• Pop-up window Tap to connect
• Smart APP Various functions
• Open lid to pair
• 17.5hr battery life Type-C port
• Touch control Easy to use
  

Master-slave switch Either one is master

ENC Clear stereo calling

• Outstanding Aesthetic
• User-friendly Design
• The housing has been improved with curved charging case and textured coating so as to offer matte texture. Semi in-ear design delivers long-listen comfort
  

An HD Stereo sound you’ll want to hear. Powered by A tiny 13 mm driver sits inside the headphones to deliver clear sound. Bluetooth 5.0 deliver a faster and more stable wireless connection to your devices.

Bringing Impressing Sound Stage

13mm Big Dynamic Driver
Bringing Impressing Sound Stage
High-end dynamic driver has been embedded in this tiny earbud seeking to provide large, wide sound space with more audio details. You will be steeped in its prominent audio performance.
13mm Big Dynamic Driver
Bass Punchy

Mid-highs Rich detailed

Put on to Play, Take off to Pause
They Acting in a Response to You built-in Infrared Radiation Sensor in each earbud is able to detect whether
you’re wearing one or both, and decide to play or not accordingly.
In-ear detection can be switched on/off in QCY App

Pairing Animation

Pairing Animation
Popping up Upon Opening Lio
Thanks to Hall Switch, the earbuds will be paired whenever you open lid. Furthermore, pop-up window will auto jump out on your phone once you open QCY App or Bluetooth faculty on phone.
Just tap to connect.
‘Pop-up window is only available for Android system

Mail Calendar Photos

Your T7, Your Decision Various Functions Added in QCY App
Mail Calendar Photos
Clock Weather App Store
With QCY App, you can customize T7 deeply from button to EQ
*Please check User Manual and download QCY App
QCY App is available for device with system of Android 5.1 or
above/os 11 or above
The functions of checking earbuds’ last location and finding
earbuds are only available when they are connected

Music Never Stopping

17.5 Hours of Long Battery Life
Music Never Stopping
We update Type-C port for T7 to make charging more convenient.
With 380mAh charging case offering extra 4 top-ups, the total battery life reaches 17.5 hours.
380mAh 262 tracks |8 films
All the above data are measured by Hele Electronic Lab in 50% volume yet practical data may vary according to specific situation.

One Touch to Go Easy Control

One Touch to Go Easy Control
Simply place your finger over the touching panel to skip track or handle calls.
No more physical button, no more pressure on ear.
Pause /play music Double touch either earbud
Answer/end call Double touch either earbud
Skip track forward Keep touching either earbud
Ignore call Keep touching either earbud for 2s
Voice Assistant Triple touch either earbud

Seamless mode

Dual-ear Information Sharing One Pair of Earbuds with Multiple Modes
Seamless mode
Dual-ear information are shared in sync. Either earbud can serve as master.
Seamless switch among left right and dual modes. Use it in your way

ENC Audio Technology

ENC Audio Technology
Offering Crystal Clear Calling
Packed with advanced audio technology, the new Bluetooth 5.1
chip not only delivers noise-free calling but breathtaking music

Updated Hardcore Chip

Updated Hardcore Chip
Fast and Unbreakable Connection
The new Bluetooth 5.1 chip provides a stable connection for hour
upon hour of high-quality wireless streaming with low latency

Private Assistant at Your Service

Private Assistant at Your Service
Just Give Your Order

Summon your private assistant to manage your day, just triple touch either earbud.
Enjoy entertainment, contact with friends, get information, listen to music and set reminders without taking out your phone.
Siri, what’s the weather today?
Xiaoai, call Mr. Jordan.
Siri, take me to Heathrow Airport.

Gallery

Wireless to the truest. After a simple one-tap setup, T7 are automatically on and always connected. Using them is just as easy. The T7 experience is just as amazing whether you’re using them with your iPhone or Android.

Smart power, charge as you go Stay powered up wherever you are. The auto on/off stops your battery draining with smart charging in the carry case. No need to worry about battery life, just place your headphones in the carry case to charge on the g.

Switch modes and share as you please. Breakaway from the limits of wired earphones. When a phone call comes, simply remove one earphone to  automatically switch to single-side talk mode. You can even pass one earphone to
a friend to enjoy a song together and bounce along to the beat

Light and comfortable to wear. Each individual earphone weighs just 4.8g and is carefully designed to adjust to your ear. The silicone ear tips help to reduce outside noise while improving comfort and stability for the best wearing
experience.

Advanced Bluetooth 5.

The up-to-date Bluetooth 5.1 Technology ensures better sound quality, lower latency in playing game, more stable connection, and at the same time more power saving.

ENC Noise Canceling 

QCY T7 is equipped with 4 Directional Mics, able to locate sound source and reduce background noise, so as to bring crystal-clear calling.

Pairing & Connecting Animation

Every time you open the charging case, QCY T7 will automatically connect to your phone with a pop-up animation. You can easily get the power remaining of each earbud and quickly access app to customize them (Require QCY App, animation not supported on iOS).

Wearing Detection

Built-in Infrared Sensors keep monitoring whether you are wearing the earbuds.
Put on to play and take off to pause, all automatic.

Customize via APP

Through the QCY App, you can set your personal control settings and tune the equalizer to fit your favorite music. Also, you can customize the touch control settings.

18 hours Battery Life

With 380mAh charging case offering extra 4 top-ups, the total battery life reaches 18 hours. And equipped with Type-C port, making it convenient and efficient when charging.

Ergonomic design

The streamlined design fits more closely with your ears, brings a comfortable wearing experience.

Special

1. Sensitive Touch Control, All hearing control is at your fingertips.
2. Wake up voice assistant, Long press the touch panel to interact with Siri, Google Now, or Cortana voice-controlled smartphone assistants.
3. Power up to power on. Get up to six hours of battery life with an additional seven hours from the case that doubles as a wireless charger
4.  Once pair, always connect. After a simple one-tap setup, QCY T7 are automatically on and always connected
5. Waterproof design. The earphones are IPX7 waterproof level, so you can use them while working out without worry
6. Main/Slave Setting, QCY T7 could have both earbuds connecting with the device. When a phone call comes, simply shut one earphone to automatically switch to single-side talk mode. You can even pass one earphone to a friend to enjoy a song together and bounce along to the beat.
7. Built for elite athletes, Adjustable, secure-fit ear-hooks for lightweight comfort and stability.
8.  Powered by diameter 13 mm moving coil driver, QCY T7 boast powerful, balanced audio thanks to an entirely redesigned acoustic package that delivers pure sound reproduction, enhanced clarity, and improved dynamic range.
9. Exclusive APP, QCY T7 have settings that you can customize to suit your needs.
   Rename them, change how you control music, and more.
10. Pop-up windows, A pop-up should appear that shows how much battery you have left on each earbud and the charging case.
11. Automatic Ear Detection. By default, QCY T7 sense when they’re in your ear and receive the audio from your device. QCY T7 also pause and resume playback when you remove one of your QCY T7, or stop playback.

Specification

PACKAGE DIMENSIONS: 4.29 x 3.58 x 1.38 inches
ITEM WEIGHT: 5.3 ounces

• Bluetooth 5.0
• 4 hours listening on a full charge
• Charging case can charge earpieces fully 4 times
• Comes with USB-C cable
• Bluetooth range 10 meters
• Control Buttons on the earplugs itself
• Connection Automatic on pickup
• Microphone Yes, built-in
• Noise Cancelling Yes, ENC Noise Reduction
• Android/iOS Suitable for both Android and iOS
• App support Yes
• Mono Model Yes, possible
• Waterproof Yes, IPX4 (splash proof)
• Battery life earphones 3.5 hours
• Total battery life Charge 4 times, so 17.5 hours in total
• Charging time earphones 1.5 hours
• Charging time charging box 2 hours
• Standby time 120 hours
• Weight Unknown
• Accessories 1x Earplugs, 1x Charge Box, 1x User Manual and 1x USB-C Cable
• Sound channel Two-channel (stereo)
• Language English
• Main Materials Plastic,Abs
• Application Scope Sport
• Connectivity Wireless
• Features Surround Sound
• Colors: White
• Driver Unit: 13mm dynamic driver
• Music Time: 2h-3.5h
• Talk Time: 3 Hours
• Bluetooth Code: HFP / A2DP / HSP / AVRCP
• Speaker: Diameter 13 mm Moving

What’s in the box

• T 7 Earbuds & carry case
  
• Type-C cable
  
• User manual
  

QCY T1 True Wireless Earbuds User Manual

Overview

Choose EarTips 

It is recommended you try middle EarTips first they fit most people.

(For first time pairing) 

Take out both two EarBuds then re-insert them into the case to activate the earphones

Notes: If EarBuds fail to be charged, please charge the case via USB cable(for details, please refer the following step).

How to Pair

Push both EarBuds into charging case to activate them then take out from the case and they will auto power on and pair with each other. Right EarBud will auto enter pairing mode  when LED on left EarBud turns off. On cellphone, search for QCY-T1_R and tap to connect cellphone to both EarBuds.

(Please try the following steps, in case you fail to build connection.)

Power off two EarBuds and tap and hold MFBs on both of them for 20s (LED will blink red and white then turn off and 10s later blink red and white 3 times). Tap and hold two EarBuds for 1s to power on(LED blinks red white twice) and two EarBuds will auto pair with each other. Then right EarBud will auto enter pairing mode(LED blinks red and white) when LED on left EarBud turn off. On cellphone, search for QCY-T1_R  and tap to connect both EarBuds with cellphone.

Notes: if two EarBuds fail to pair with each other in 20s, they will enter pairing mode(connectable to cellphone).

Functions

Power-on
Method 1: take earphones out from the charging case and they will auto power on(LED glows solid white).

Method 2: power off earphones and hold MFB for 1s to power on(LED glows solid white).

Power-off
Hold MFB for 3s(red LED will turn on for 2s).

Ignore Call
Hold MFB for 1s to ignore incoming call.

Answer Call
Tap MFB to answer incoming call and tap again to end it.

Switch Audio Output
When calling, hold MFB for 1s to switch audio output between cellphone and earphones.

Mute-on/off
When calling, double tap MFB to switch mute on/off.

Playback/pause
When standby in stereo mode, tap MFB to play and tap again to pause.

Skip Track Forward/backward
When playing, double press MFB on right/left EarBud to skip track forward/backward.

Voice Assistant
When standby, hold MFB for 1s to activate voice assistant (like Siri).

The Following Functions Can Only be Enjoyed in Mono Mode

Single EarBud Re-connection
Power on single EarBud(LED will turn on white), tap MFB to re-connect to the last device in connection records, if any.

Charge the Earphones
Insert the earphones into charging case(pogo pins should be well-contacted). LED will be solid red when charging and turn to white for 60s once topped up

Charge the Case
Please charge the case via USB cable.
LED glows solid green when the case is being charged and turn off once topped up.

Product Parameter

• Model: T1
• Operation Range: 10m(with no obstacle)
• Bluetooth version: V5.0
• Charging time: approx. 2hr
• Standby time: approx. 120hr
• Music time: approx. 4hr
• Battery type: li-ion
• Bluetooth profiles: HFP/HSP/A2DP/AVRCP
• Battery capacity(earphones): 3.7V 43mAh
• Battery capacity(charging case): 3.7V 380mAh
• Input parameter(charging case): 5V 500mA

(All technical data shall be subject to practical performance.)

Hazardous substances and their contents in the item 

This form is made by SJ/T 11364 regulation.

0 : means that hazardous substance content in the homogeneous materials of this part is within the limits of GB/T 26572 regulation.
X ：means that hazardous substance content in, at least, one certain homogeneous material of this part is beyond the limits of GB/T 26572 regulation.

Notes: Please arrange using time properly as your hearing may be damaged by using the device for a long time.

Perform standard: Q/HL 1-2016 Q/HL 2-2017
Manufacturer: Dongguan Hele Electronics Co., Ltd.
Address: Daojiao Town, Dongguan City, Guangdong, China

Tips

1. Before using the headset, please read the manual carefully and keep it for future references.
2. The headset need to be fully charged prior to first-time use.
3. If the headset is left unused for over two weeks, please recharge it periodically.
4. Please use the chargers made by qualified manufacturer.
5. If the headset cannot be found by your phone, please check whether it is in pairing mode; if left unconnected for a long while, the headset will exit pairing mode, please re-enter the mode; if a procedure error of your phone occurs, reboot it; if a procedure error of the headsetoccurs, reboot or reset it.

Caveats

1. Never disassemble or modify your headset for any reasons to avoid any damages and danger.
2. Do not store the headset in extreme temperatures (under 0℃ or over 45℃).
3. Avoid using the indicator close to the eyes of children or animals.
4. Do not use this headset during a thunderstorm to avoid irregular function and increased risk of electricshock.
5. Do not use harsh chemicals or strong detergents to clean the headset.
6. Keep the headset dry.

Warranty Card

Warranty Period
12 months after you purchase this item.(or you may inquire your local shopper for more details.)

Free Service:
Supposing any defects caused by quality issues occur within the warranty period, please take this warranty card and purchase receipts to your distributor for free exchange service.

Free exchange service will not be accessed under following circumstances:

1. Damages caused unauthorized disassembly.
2. Defects or physical damages caused by leaking or dropping off.
3. Damages by act of God. Supposing your item is within any damages or defects except the above circumstances, please return to us or your distributor for free repairing

FCC Statement

This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be  determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help

This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.

Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to  operate the equipment.

QCY-T5
TWS Bluetooth Earbuds

Overview

Choose Your Eartips

L                              M                   S

Please try medium eartips first as they fit most people.

How to Pair

First Time Pairing:

1. Pick up both earbuds.
2. On cellphone, search for QCY-T5 and tap to connect.
   *Once paired earbuds will auto power on upon picking up from the case. If earbuds fail to auto power on, please charge them and try again.

Switch Paired Device:

1. Turn off phoneA’s Bluetooth faculty and earbuds will auto disconnect and enter into pairing mode.
2. On phoneB, search for QCY-T5 and tap to connect.
   *Multi-point connection is not available. Earbuds will auto reconnect to phoneB upon powering up again.

Factory Setting

(Try the following steps to fix connectivity issue)
Set to factory:

1. On cellphone, search for QCY-T5, tap and choose ignore or cancel pairing.
2. Pick up two earbuds, keep touching both bars for 8s or until LEDs glow red for 2s to power off.
3. Keep touching both bars for 10s or until LEDs blink red and green 3 times then blink red to set earbuds to factory.
   *Please refer “First Time Pairing” to connect after factory setting.

How to Wear

1. Rotate earbud and pop it into your ear then shake head to check wearing stability.
2. Please adjust mic towards your mouth to gain better calling experience.

Three-way Calling & Switch
Earphones are connected with phoneA. Double press MFB to answer incoming call from phoneB. If another call is coming from phoneC in sync, double press MFB to put the first call on held while activating the second call.
Hold MFB to switch between active call and held call.

Ignore the second call in three-way calling: earphones are connected with phoneA. Double press MFB to answer incoming call from phoneB. If another call is coming from phoneC in sync, hold MFB to ignore the second call while keeping the first call.

Mono Mode

1. Power off earbud then keep touching the bar for 5s to enter pairing mode ( LED blinks red and green )
2. On cellphone, search for QCY_T5
3. Tap to connect

Charging Earbud
Push earbud into the case to charge. LED will glow solid red when charging and turn to green for 1 minute once top up.

Charging the Case
Charge the case via USB cable. LED will glow solid green when charging and turn off once top up.

Product Parameters
Model:In1925                              Pairing name: QCY-T5
Bluetooth version: V5.0               Stand time: approx. 70hr
Charging time: approx. 2hr          Music time: approx. 4 or 5hr
Talking time: approx. 4hr
Operation range: 10m(with no obstacle)
Battery type: li-ion
Battery capacity(earbud):3.7V 40mAh
Battery capacity(charging case):3.7V 380mAh
Input parameter(charging case):5V 500mA
Bluetooth profiles: HSP/HFP/A2DP/AVRCP

Function Introduction

Warranty Card

Warranty Period
12 months after you purchase this item.(or you may inquire your local shopper for more details.)
Free Service:
Supposing any defects caused by quality issues occur within the warranty period, please take this warranty card and purchase receipts to your distributor for free exchange service.

Model Number:
Date of Purchasing:
User’s Name:
User’s Phone:
User’s Address:
Shop’s Name:
Shop’s Address:
Comments:

Free exchange service will not be accessed under following circumstances:

1. Damages caused unauthorized disassembly.
2. Defects or physical damages caused by leaking or dropping off.
3. Damages by act of God.Supposing your item is within any damages or defects except the above circumstances, please return to us or your distributor for free repairing.

FCC Statement

This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
— Reorient or relocate the receiving antenna.
— Increase the separation between the equipment and receiver.
— Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
— Consult the dealer or an experienced radio/11/ technician for help.

This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions:
(1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.

Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.

Hazardous substances and their contents in the item

This form is made by SJ/T 11364 regulation.

0: means that hazardous substance content in the homogeneous materials of this part is within the limits of (EU) 2015/863 regulation .
X : means that hazardous substance content in ,at least, one certain homogeneous material of this part is beyond the limits of (EU) 2015/863 regulation ,but there is no mature alternative in the industry at present, it still conforms to the EU ROHS Directive in the scope of exemption.

Notes: Please arrange using time properly as your hearing may be damaged by using the device for a long time.
Perform standard: Q/HL 1-2019 ; Q/HL 2-2017
Manufacturer: Dongguan Hele Electronics Co., Ltd.
Address: Daojiao Town, Dongguan City, Guangdong, China

Tips

1. Before using the headset, please read the manual carefully and keep it for future references.
2. The headset need to be fully charged prior to first-time use.
3. If the headset is left unused for over two weeks, please recharge it periodically.
4. Please use the chargers made by qualified manufacturer.
5. If the headset cannot be found by your phone, please check whether it is in pairing mode; if left unconnected for a long while, the headset will exit pairing mode, please re-enter the mode; if a procedure error of your phone occurs, reboot it; if a procedure error of the headsetoccurs, reboot or reset it.

Caveats

1. Never disassemble or modify your headset for any reasons to avoid any damages and danger.
2. Do not store the headset in extreme temperatures (under 0°C or over 45°C).
3. Avoid using the indicator close to the eyes of children or animals.
4. Do not use this headset during a thunderstorm to avoid irregular function and increased risk of electricshock.
5. Do not use harsh chemicals or strong detergents to clean the headset.
6. Keep the headset dry.

CMIIT ID: 2019DP6793

QCY T1 Pro Q38/TWS Bluetooth Earphones Manual

Overview
1. Change EarTip

It is suggested that you try Middle EarTip first as it fits most people.

2. How to wear

Adjust its end towards your mouth .

TWS Mode

1. Remove the sti ckers on both Ear Buds and plug the EarBuds back in Charging Case as a way to activate EarBuds.

Notes: if EarBuds are unable to be charged, please charge for the charging case via USB cable first(for more details, please refer the following steps).

2. Take out the right EarBud and hold its MFB for 5s to trigger pairing mode then wait for auto connection with cellphone. After the auto connection is done, take out the left EarBud and hold its MFB for 1s to power on. Now wait until two EarBuds auto connect with each other(LED blinks red and white for 1s).

(Try the following step if you fail to build connection between two EarBuds)

Take out both two EarBuds and hold MFBs on both of them for 1s to power on. Then double tap MFBs on both EarBuds separately and wait until two of them auto connect with each other (LED blinks red and white for 1s).

Operation in Stereo Mode

Power-on
Hold MFB for 1s(LED will turn to white)

Power-off
Granting two EarBuds connect with each other, hold MFB on either EarBud for 3s to power off both of them(LED will turn to red for 2s)

Factory Setting
Hold MFB/s for 5s(LED/s will blink red and white) when EarBud/ s charged. Once reset EarBud/s to factory, all pairing list will be erased.

Play Media in both EarBuds

Play/Pause
When two EarBuds are connected with e ach other and cellphone, tap MFB on either EarBud to play/pause music. Skip Track Forward Double tap MFB on either EarBud to track forward.

Mono Mode

1. Hold MFB on either EarBud for 5s to enter pairing mode.
(LED will blink red and white.)
2. On cellphone, search for “QCY-Q38” and tap to connect.
3. The connection has been completed.

Operation in Mono Mode
Power-on
Power-on Hold MFB for 1s(LED turns to white)

Power-off
Hold MFB for 3s(LED will be red for 2s)

Ignore Call
Hold MFB for 1s to ignore incoming call.

Answer Call
Tap MFB to answer incoming call and tap it again to end the call.
Notes: Only EarBud connected with cellphone is able to deal with incoming call.

Switching Audio Output between Cellphone and EarBud
When calling, you may hold MFB for 1s.

Mute On/Off
When calling, you may double tap MFB to switch mute on/off.

Play/Pause
Tap MFB to play/pause music.

Skip Track Forward
Double tap MFB to track forward.

Three Way Calling
Activate call waiting facility on your cellphone.(you may refer to cellphone’s manual for more details.)
1. Activate call: Whenever you are on a call and have another incoming call from another cellphone at the same time,you may tap MFB to activate the second call while put the first one on hold.
Ignore call: Whenever you are on a call and have another incoming call from another cellphone at the same time, you may hold MFB for 1s to ignore the second call while keep talking on the first one.

2. Switch b etween held call and active call: Double tap MFB to switch between the two calls.
End call: During three way calling, hold MFB for 1s to end the active call while re-activate the held one.

Voice Control
Hold MFB for 1s to activate voice assistant(like Siri)

Single EarBud Re-connecting with Cellphone
Power on single EarBud(LED will turn to white) then tap MFB to reconnect to the last connected device.(the EarBud was once connected with device before.)

Charging for Earphones
Low battery will be warned by voice prompt.
(LED will be solid red when charging and turn off once fully charged.)

Plug EarBuds back into Charging Case.(Pogo pins should be contacted properly.)

Charging for the Charging Case
LED will be solid red when charging and turn to blue once fully charged.

Charge the case via USB cable

Feature

Parameters
Model number: QCY-Q38
Stand-by time: Approx.80hr
Battery type: Li-polymer
Size: 25.3×17.3×29mm
Operation range: 10m(no obstacle)
Bluetooth profile:HFP/HSP/A2DP/AVRCP
Battery capacity(EarBud): 3.7V 43 mAh
Battery capacity(Charging Case):3.7V 220mAh
Input parameter(Charging Case):5V 250mA
Bluetooth version:V4.2
Weight: 5.3g
Talking time: Approx. 3hr

After Service and Support

1. Warranty Period
1)Returning: 1 year after you purchase this item.
2)Repairing: 2 years after you purchase this item.

2. Free Returning will Only be Accessed under All of Following Circumstances
1) 1 year after you purchase this item.
2)Three completed guarantee receipts have to be provided to distributor(item model No., sales date and item serial No. shall be displayed on invoice and warranty card).
3)Required item has to be with full package and accessories.
4)Malfunction has to be caused by quality deficiencies.
Notes: Exchanged item will have the same model No. and spec. as your required one’s.

3. Free Repairing will Only be Accessed under All of Following Circumstances
1) 2 years after you purchase this item.
2)Three completed guarantee receipts have to be provided to distributor(item model No., sales date and item serial No. shall be displayed on invoice and warranty card).
3) Malfunction has to be caused by quality deficiencies.

Free repairing & returning will not be accessed under following circumstances
A: Item is out of warranty period or effective sales receipt and warranty card fail to be provided.

B: Breakdowns of housing, bags, gifts and accessories or any non-functional fault.

C: Unauthorized disassembly, breakdowns caused by improper operation or using in environment which is forbidden in user’s manual.

D: Artificial damages(including but not limiting to leaking, damped, dropping off, squeezing, breaking, burning and distortion).

E: Faults caused by force Majeures(such as earthquake, fire and flood).

Hazardous substances and their contents in the item

Lifespan:
As the booklet states, the eco-lifespan of the item is 5 years while using it in normal ways. During the period, no dangerous material will be leaked. The item must be recycled by the local law.

Tips
1.Before using the headset, please read the manual carefully and keep it for future references.

2.The headset need to be fully charged prior to first-time use.
3.If the headset is left unused for over two weeks, please recharge it periodically.

4.Please use the chargers made by qualified manufacturer.
5.If the headset cannot be found by your phone, please check whether it is in pairing mode; if left unconnected for a long while, the headset will exit pairing mode, please re-enter the mode; if a procedure error of your phone occurs, reboot it; if a procedure error of the headset occurs, reboot or reset it.

6. If the t wo uni ts can not connect with each other automatically when switched on. Please hold the MFB of both units until the white light is on then move them approaching each other and wait for the connection completed.

Caveats
1.Never disassemble or modify your headset for any reasons to avoid any damages and danger.

2.Do not store the headset in extreme temperatures (under 0℃ or over 45℃).

3.Avoid using the indicator close to the eyes of children or animals.

4.Do not use this headset during a thunderstorm to avoid irregular function and increased risk of electric shock.

5.Do not use harsh chemicals or strong detergents to clean the headset.

6.Keep the headset dry.
Notes: Please arrange using time properly since your hearing may be damaged by using the device for a long time.

For any after service, please contact local distributor
Perform standard: Q/HL 1-2016
Manufacturer: Dongguan Hele Electronics Co., Ltd.
Address: Dalingya Industrial Zone, Daojiao Town,Dongguan City, Guangdong Province(QCY Environmental Zone, Dayaling No.5, YuehuiRoad)

QCY T1 Pro User Manual

Overview

1. Choose EARTip:

It is Suggested that you try Middle EarTip as it first most people.

2. How to Wear:

Adjust Mic towards your mouth.

TWS Mode (for first time use):

Pull both EarBuds out from the charging case then re-insert in the charging case to active two EarBuds.

Note: If Earbud fails to charging, Please charge the case via USB Cable ( for more details you can follows the following steps)

TWS Mode:

Takeout two EarBuds and they will auto power on and pair with each other. Right EarBud will auto enter pairing mode(connectable to cellphone) when the LED on the left one turn off. On cellphone, search for QCY-Tl_R and tap to connect cellphone with both two EarBuds.

Power off two EarBuds and touch and hold MFBs on both of them for 20s (LED will blink red and blue then Wm off and 10s Later blink red and blue 3 times).Touch and hold two EarBuds for is to power on(LED blinks red blue twice) and two EarBuds will auto pair with each other. Then right EarBud will auto enter pairing mode(LED blinks red and blue) when LED on left EarBud turn off. On cellphone, search for QU-T1 ProR and tap to connect both EarBuds with cellphone. Notes: if two EarBuds failto pairMth each other in 20s, they will enter pairing mode(connectable to cellphone).

Operation in TINS Mode

Power-on
Touch and hold SIM for Is(LEO will be solid blue)

Power-off
When two EarBuds are connected touch and hold MFB on either EarBud for 3s to power off both EarBuds(LED will turn on red for 2s
Play Media in both EarBuds

Play/Pause
When two EarBuds are connected, touch MFB on either EarBud to play/pause.

Skip Track
When playing music, double touch MFB on left EarBud to skip track backward while double touch MFB on right EarBud to skip track forward.

Mono Mode:

1.Touch and hold MFB on ether EarBud for 5s to power on and it will auto enter pairing mode (LED blinks red and blue).

2. 0n cellphone, search for QCY-Tl Pro_R/L and tap to connect.

3.Connection completed.

Operation on Mono Mode:

Power On:Touch and Hold MBF for 1s. ( Blue LED will turn on).

Power OFF
Touch and Hold MFB for 3s.( LED will Turn ON red 2s)

Ignore Call:
Touch and hold MFB 1s to ignore incoming call.

Answer Call:

Touch MFB for Answer incoming call and Touch again to end it.

Switch Audio Output:
When calling Touch MFB for 1s to switch audio output between cellphone and earphone.

Switch Mute on/off:
When calling double tap MFB to Switch Mute on/off.

Voice Assistant
When standby, touch and hold MFB for Is to activate voice assistant like Siri),

Charging the Earphones
Low battery will be warned by voice prompt. (LED will be solid red when charging and turn to blue for 605 when fully charged)

Put EarBud into charging case ( Pogo pin should be well connected)

Charging the Case
On the case,4 LEDs will start to breathe one by one as charging proceeding. Once topped-up, all of them will glow solid white for 5s.

Use USB Cables to charge the Case.

Features
1. Metal charging case offers un to 6 top-ups.

2. with Bluetooth 5.0V, you can enjoy more wireless feature.

3. Innovative EarTips keep EarBuds in Place when you are not.

Specifications
Model: T1 Pro
Bluetooth version: 05.0
Operation range 10m(with no obstacles)
Standby time approx. 100hr Size 56X 54 X33mm
Talk time: approx.4 or 5hr
Battery type: li-ion
Bluetooth profiles: HEP/HSP/A2DP/AVRCP
Battery capacity(for earphones): 3.7V 4OrnAh BatterYeaPacity(for charging case):3.10 750mAh
Input parameter(for charging case): 50= 500mA (All technical specifications shall be subject to practical performance.)
Perform standard: Q/HL 1-2016; Q/HL 2-2011
Manufacturer: Dongguan Hele Electronics Co., Ltd.
Address: Dalingya Industrial Zone, Daojrao Town, Dongguan City, Guangdong, Chian.

Tips:
1. Before using the headset please read the manual carefully and keep it for future references.
2. The headset need to be fully charged prior to first-time use.
3. If the headset is left unused for over two weeks, please recharge it periodically.
4. Please use the chargers made by qualified manufacturer.
5 If the headset cannot be found by your phone, please check whether it B in pairing mode; if left unconnected for a long while, the headset will exit pairing mode, please re-enter the mode; if a procedure error of your phone occurs, reboot it; if a procedure error of the headset occurs, reboot or reset it

Caveats
1. Never disassemble or modify your headset for any Masons to avoid any damages and danger.
2. Do not store the headset in extreme temperatures (under 0°C or over 45°C).
3. Avoid using the indicator close to the yes of children or animals
4. Do not use this headset during a thunderstorm to avoid irregular function and increased risk of electric shock.
5 Do not use harsh chemicals or strong detergents to clean the headset.
6. Keep the headset dry.

Warranty Card
Warranty Period 12 months after you purchase this item.(or you may inquire your local shopper Mr more details.) Free Service: Supposing am/defects caused by quality issues occur within the warranty period, please take this warranty card and purchase recepts. to your distributor for free exchange service.

Model Number:
Date of Purchasing:
User’s Name:
User’s Phone:
User’s Address:
Shop, Name:
Shops Address:
Comments:

Free exchange service will not be accessed under following circumstance:

1. Damages caused unauthorized disassembly.

2. Defects or physical damages caused by leaking or Mopping off.

3. the above dream-tan°, please return to us or your distributor for free repairing.

Overview

How to Pair

Factory Setting

How to Wear

Mono Mode

Function Introduction

Warranty Card

Warranty Card

FCC Statement

Tips & Caveats

QCY TWS Bluetooth Earphones QCY-Q29

Start Up

• Pick up and assemble one among them

Middle size ear tip is suggested to try first as it suits most people.

• How to wear

Mono Mode – Manual Pairing

(Mono Mode: either of the two units can be used independently)

Main unit(R) will enter pairing mode once switched on (red and white indicator flashes slowly) Hold MFB for 5s and Auxiliary unit(L) will enter pairing mode(red and white indicator flashes slowly) Activate Bluetooth function on the phone, search and touch the pairing name to connect.

Pairing name: Left earphone(QCY-Q29_L) Right earphone (QCY-Q29_R)

Stereo Mode – Maiden Using

(Stereo Mode: Connect the two units in series then use them as a pair of stereo earphone)

1. Tear off the stickers of both units, then put the units into the charging dock activating them.
2. Get the main one out of the dock, turn on cellphone’s Bluetooth facility to search for QCY-Q29_Rand touch it to connect.
3. Pull the auxiliary unit(L) up then move the unit approaching the main one.

Stereo Mode – Manual Pairing

(When the two units fail to pair with each other)

1. Pair the main unit(R) with cellphone at first
2. Turn the main one off when the process 1 is done successfully
3. Hold “QCY” buttons of both units until the white indicators are on
4. Wait them to connect with each other

Stereo Mode – Manual Pairing(Alternative)

1. Take two units out and peel away their stickers. In power-off status, hold MFBs of the two units for 8s to enter pairing mode(white light is on constantly). Then, two units will be paired automatically in approximately 5s. At last, switch off the main unit(R) and the auxiliary unit(L) will be turned off automatically. 
2. Hold MFB of the main unit(R) for 5s to enter searching mode(red and white light blinks alternately). Then turn on Bluetooth facility on cellphone to search for “QCY-Q29 R” and touch it to pair.
3. Switch on the auxiliary unit(L) by holding its MFB for 3s white light blinks). Approach it to the main unit(R). Then, both units will be paired with each other automatically in 5s.

Notes: If the main unit (R) have been connected with a Bluetooth device but the auxiliary unit(L) can not be connected with the main unit(R) automatically(two units fail to connect with each other), please switch off both of them then hold their MFBs together for approximately 8s to enter pairing mode.

Charging

Red Indicator will flash with voice prompt to imply the condition of low battery(White light is on to show charging status while off, full charged)

Note: Red light will flash when the earphone is inserted in the dock, which means the connection works well.

Put the units inside(charging contacts should be set properly)

Charging for the Dock

Red indicator will be on when the dock is charging, When it is full charged, blue indicator will be on instead.

Charge it by USB cable

Mono Mode

Power-on                                                                                                                                Hold MFB for roughly 3s(white light will be on) If the unit is charging in the dock, it will be activated whenever you take it out.

Power-off                                                                                                                                     Hold MFB for roughly 3s(red light will be on)

Reject a call                                                                                                                                 Hold MFB for 1s to reject an incoming call

Answer a call                                                                                                                             Press MFB to answer an incoming call Press it again to end

Redial the last outgoing call Double press MFB during stand-by

Mute                                                                                                                                     Double press MFB when you are on the call

Three-way Talking

Activate call waiting facility on your phone(for more details please refer your phone’s manual).

1. Whenever you are on the phone and there is an incoming call at the same time, please press MFB to answer the second one.
2. Supposing you have two incoming calls at the same time, the first one is talking while the second is holding, you may switch their statuses by double pressing MFB.

Pause/Resume                                                                                                                         Press MFB to pause or resume when single unit is connected with cellphone.

Voice Control                                                                                                                             Hold MFB for 1s to activate voice assistant (like Siri)

Switch Voice between Earphone and Cellphone Hold MFB for 1s to switch during calling.

Re-connection with cellphone in mono mode When single unit is power-off, at first switch it on white light is on) then press MFB to re-connect with the last cellphone once connected (the unit has to be connected before)

Stereo Mode

Power-on                                                                                                                                    Hold MFB for roughly 3s(white light will be on) If the units are charging in the dock, they will be activated whenever you take them out

Power-off                                                                                                                                  Two units are in series connection while the main unit(R) is connected with cellphone, hold MFB of either of them for about 4s, they will be switched off at the same time (red lights are on)

Media Sharing between two Units                                                                                           Two units are in series connection while the main unit(R) is connected with cellphone, press MFB of either of them to play or pause music and you can enjoy songs by both units together

Note: Only the main unit(R) is available to answer a call.

How to Connect Units in Series and Share Media

1. When the main unit(R) is charging in the dock, it will be activated and re-connect with cellphone by itself soon as you take it out from the dock. Pull the auxiliary unit(L) up and it will be turned on and re-connect with the main unit(R).
2. Suppose that two units fail to connect with each other, connect the main unit(R) with cellphone and play music then press MFB of the main unit(R) three times so as to re-connect it with the auxiliary unit(L).

Characters

Parameters

After Service and Support

Warranty period: 12 months following the purchase date.

Free service:                                                                                                                         Under warranty, if there is any breakdown caused by manufacturing defects, please contact our dealers to enjoy free maintenance. You will always need this Warranty Card and yourreceipt or other proof of purchase to claim warranty.

Free maintenance won’t be available under the following circumstances:

1. Without Warranty Card or intact maintenance label.
2. Damage caused by improper disassembly or repair.
3. Damage resulting from liquid or dropping, and other artificial mechanical defects
4. Damage caused by any force majeure

Hazardous substances and their contents in the item.

This form is made by SJ/T 11364 regulation.

• O: means that hazardous substance content in the homogeneous materials of this part is within the limits of GB/T 26572 regulation.
• X: means that hazardous substance content in, at least one certain homogeneous material of this part is beyond the limits of GB/T 26572 regulation.

Lifespan:                                                                                                                                    As the booklet states, the eco-lifespan of the item is 5 years while using it in normal ways. During the period, no dangerous material will be leaked. The item must be recycled by the local law.

Tips

1. Before using the headset, please read the manual carefully and keep it for future references.
2. The headset need to be fully charged prior to first-time use.
3. If the headset is left unused for over two weeks, please recharge it periodically,
4. Please use the chargers made by qualified manufacturer.
5. If the headset cannot be found by your phone, please check whether it is in pairing mode; if left unconnected for a long while, the headset will exit pairing mode, please re-enter the mode; if a procedure error of your phone occurs, reboot it; if a procedure error of the head set occurs, reboot or reset it.
6. If the two units can not connect with each other automatically when switched on. Please hold the MFB of both units until the white light is on then move them approaching each other and wait for the connection completed.

Caveats

1. Never disassemble or modify your headset for any reasons to avoid any damages and danger.
2. Do not store the headset in extreme temperatures (under 0°C or over 45°C).
3. Avoid using the indicator dose to the eyes of children or animals.
4. Do not use this headset during a thunderstorm to avoid irregular function and increased risk of electric shock.
5. Do not use harsh chemicals or strong detergents to clean the headset.
6. Keep the headset dry.

Notes: Please arrange using time properly since your hearing may be damaged by using the device for a long time.

For any after service, please contact QCY customer-service

• Perform standard: Q/HL 1-2016
• Web: www.qcybluetooth.com
• Manufacturer: Dongguan Hele Electronics Co., Ltd.
• Address: Dalingya Industrial Zone, Daojiao Town, Dongguan City, Guangdong Province(QCY Environmental Zone, Dayaling No.5, Yuehui Road)

Wireless Noise Canceling Stereo Headset

Overview
1. Change EarTip

If it is suggested that you try Middle EarTip first as it first most People.

How to wear:

Adjust its end towards your mouth.

TWS Mode:

1. Remove the stickers on both EarBuds and plug the EarBuds back in Charging Case as a way to activate EarBuds.

Notes: if EarBuds are unable to be charge, please charge for the charging case via USB cable first(for more details, please refer the following steps).

2. Take out the right earned and hold its MFB for 5s to Trigger pairing mode then wait for auto connection with cellphone. after the auto connection Is done take out the left Earbud and hold Its MFB for 1s to power on. Now wait until two Earbuds auto connect with each other (LED blinks red and white tail 1s).

( Try the following steps if you fail to build connection between two Earbuds.)

Take out both two EarBuds and hold MFBs on both of them for is to power on. Then double tap MFBs on both EarBuds separately and wait until two of them auto connect with each other (LED blinks red and white for 1s).

Operation in Stereo Mode

Power-on
Hold MFB for ls(LED will turn to white)

Power-off
Granting two Ea rBuds connect with each other, hold MFB on either EarBud for 3s to power off both of them(LED will turn to red for 2s)

Factory Setting
Hold MFB/sfor5s(LED/swill blink red and white) when EarBud/s charged. Once reset EarBudis to factory, all palling list will be erased.

Play Media in both EarBuds

Play/Pause
When two EarBuds are connected with each other and cellphone, tap MFB on either EarBud to play/pause music.

Skip Track Forward
Double tap MFB on either EarBud to track forward.

Mono Mode

1. Hold MFB on either EarBud for 5s to enter pairing mode. (LED will blink red and white.)
2. On cellphone, search for “QCY-Q38” and tap to connect.
3. The connection has.been completed.

Operation in Mono Mode
Power on
Holds MFB for 1s (LED turns to white)

Power off
Holds MFB for 3s ( LED will be red for 2s)

Ignore Call
Holds MFB for 1s to Ignore incoming calls.

Answer Call
Tap MFB to answer incoming calls and again tap to end calls.
Note: only EarBud connected with cellphone is able to deal with incoming calls.

Switching Audio Output between cellphone and EarBuds
When calling, You may hold MFB 1s

Mute on / off
When calling you may double Tap MFB to switch Mute on / off.

Play / Push
Tap MFB to play or push music.

Skip Track Forward
Double Tap MBF to Track Forward.

Three Way Calling
Activate call waiting facility on your cellphone.(you may refer to cellphone’s manual for more details.)

1. Activate call: Whenever you are on a call and have another incoming call from another cellphone at the same time,you may tap MFB to activate the second call while put the first one on hold. Ignore call:Whenever you are on a call and have another incoming call from another cellphone at the same time, you may hold MFB for is to ignore the second call while keep talking on the first one.

2. Switch between held call and active call: Double tap MFB to switch between the two calls. End call: During three way calling, hold MFB for is to end the active call while re-activate the held one.

Voice Control
Hold MFB for is to activate voice assistant(like Siri)

Single EarBud Re-connecting with Cellphone
Power on single EarBud(LED will turn to white) then tap MFBto reconnect to the last connected device.(the EarBud was once connected with device before.)

Charging for Earphones
Low battery will be warned by voice prompt. (LED will be solid red when charging and turn off once fully charged.)

Plug EarBud back into charging case.( Pogo plug should be connected properly.)

Charging for the Charging Case

Charge the case via USB cable

Feature
1. With the new 4.2 Bluetooth version,Q29 brings about more HD experience than ever.

2. TWS style delivers stereo effect with no bound of wire.

3. Special Case allows the earphones to be charged even when stored.

Parameters
Model number: QCY-Q38
Bluetooth version:V4.2
Stand-by time: Approx.80hr
Weight 5.3g
Battery type: Li-polymer
Talking time: Approx. 3hr
Size: 25.3X 17.3 X 29mm
Operation range: 10m(no obstacle)
Bluetooth profile:HFP/HSP/A2DP/AVRCP
Battery capacity(EarBud): 3.7V 43 mAh
Battery capacity(Charging Case):3.7V 220mAh
Input parameter(Charging Case):5V = 250mA

After Service and Support
1. Warranty Period 1)Returning: 1 year after you purchase this item. 2)Repairing: 2 years after you purchase this item.

2. Free Returning will Only be Accessed underAll of Following Circumstances 1)1 year after you purchase this item. 2)Three completed guarantee receipts have to be provided to distributor(item model No., sales date and item serial No. shall be displayed on invoice and warranty card). 3) Required item has to be with full package apd accessories. 4)Malfunction has to be caused by quality deficiencies. Notes: Exchanged item will have the same model No. and spec. as your required one’ s.

3. Free Repairing will Only be Accessed underAll of Following Circumstances 1) 2 years after you purchase this item. 2)Three completed guarantee receipts have to be provided to distributor(item model No., sales date and item serial No. shall be displayed on invoice and warranty card). 3) Malfunction has to be caused by quality deficiencies.

Free repairing & returning will not be accessed under following circumstances
A: Item is out of warranty period or effective sales receipt and warranty card fail to be provided.
B: Breakdowns of housing, bags, gifts and accessories orany non-functional fault.
C: Unauthorized disassembly breakdownscausedbyimproper operation or using in environment which is forbidden in user’ s manual.
D: Artificial damages(including but not limiting to leaking, damped, dropping off, squeezing, breaking, burning and distortion).
E: Faults caused byforce Majeures(such as earthquake, fire and flood).

Lifespan: As the booklet states, the eco-lifespan of the item is 5 years while using it in normal ways. Duringthe period, no dangerous material will be leaked. The item mustbe recycled bythe local law.

Tips
1.Before using the headset, please read the manual carefully and keep it for future references.
2.The headset need to be fully charged priortofirst-time use.
3.If the headset is left unused for over two weeks, please recharge it periodically.
4.Please use the chargers made by qualified manufacturer.
5.If the headset cannot be found by your phone, please check whether it is in pairing mode; if left unconnected for a long while, the headset will exit pairing mode, please re-enter the mode; if a procedure error of your phone occurs, reboot it; if a procedure error of the headsetoccurs, reboot or reset it.
6.1f the two units can not connect with eachother automatically when switched on. Please hold the MFB of both units until the white light is on then move them approaching each other andwait for the connection completed.

Caveats
1.Never disassemble or modify your headset for any reasons to avoid any damages and danger.
2.Do not store the headset in extreme temperatures (under 0°C or over 45°C).
3.Avoid using the indicator close to the eyes of children or animals.
4.Do not use this headset during a thunderstorm to avoid irregular function and increased risk of electric shock.
5.Do not use harsh chemicals or strong detergents to clean the headset.
6.Keep the headset dry. Notes Please arrange usingtime properlysinceyour hearing may be damaged by using the device for a longtime.

For any after service, please contact local distributor
Perform standard: Q/HL 1-2016 Manufacturer: Dongguan Hele Electronics Co., Ltd.
Address: Dalingya Industrial Zone, Daojiao Town,Dongguan City, Guangdong Province(QCY Environmental Zone, Dayaling No.5,YuehuiRoad)

Questions about your QCY Q38 TWS? Post in the comments!
Download QCY Q38 TWS Manual [PDF]

References

• User Manual