QAZQA Corda HL 45 Instruction Manual

Please study the instruction manual and below information carefully before installing or using this product. Please keep this user manual for further reference.

Installation

1. For indoor use only.
2. Keep out of reach of children and animals.
3. Use 220-240 ~ 50Hz, use one max. 60 watts E27 bulb.
4. Do not use in the bathroom or damp places.
5. Place the lamp on a flat surface and ensure there are no flammable materials around it.
6. Before cleaning the lamp and replacing the bulb, ensure the lamp is turned off and the bulb has cooled down.
7.  Do not change the bulb with wet hands.
8.  If the external flexible cable or cord of this lamp is damaged, it shall be  exclusively replaced by a qualified person in order to avoid a hazard.
   

Dimension

QAZQA Wi-Fi and Bluetooth Smart Bulb Instruction Manual

FEATURES

Wi-Fi & Bluetooth connection

Full range of W / W+WW / RGBW / RGBWW available

Voice control

No Hub required

Timer switch

Remote control

Grouping

Sync with music

PARAMETERS

WIRING DIAGRAM

DOWNLOAD APP

1. Search “Tuya Smart” from App store or Google play.
      
2. Scan the QR code from the label or user
   
   The APP is compatible with Android 4,0 and IOS8.1 and higher version.
   

LOG IN / REGISTER ACCOUNT NUMBER

Open the Tuya Smart APP, sign up for a new account or log in with an existing account.

DEVICE PAIRING-EASY IN

1. Turn on the Smart Bulb and enter the home of APP while ensure Bluetooth on and the WIFI signal is good and stable.
2. Smart Bulb will flashing when turn on the power supply. Stay at the home page and found the push notification, then click Go to add.
3. Select the Wi-Fi connected to the smart device, input the Wi-Fi password, and then click “Next” to wait for the matching to succeed. (Make sure smart devices share the same Wi-Fi)

Stay at the Home

Page Push Notification

Add Device

Enter/Confirm Wi-Fi Password

Connecting

Pairing Successful

DEVICE PAIRING-AUTO SCAN

1. Turn on the Smart Bulb and enter the home of APP while ensure Bluetooth on and the WIFI signal is good and stable.
2. Smart Bulb will flashing when turn on the power supply. Stay at the home page and enter the APP adding device interface, click Auto Scan to find the device then click next.
3. Select the Wi-Fi connected to the smart device, input the Wi-Fi password, and then click “Confirm” to wait for the matching to succeed. (Make sure smart devices share the same Wi-Fi)

Stay at the Home Page

Push Notification

Scan Devices

Enter/Confirm Wi-Fi Password

Connecting

Pairing Successful

DEVICE PAIRING-BLUETOOTH MANUALLY

1. Turn on the Smart Bulb and enter the home of APP while ensure Bluetooth on and the WIFI signal is good and stable.
2. Smart Bulb will flashing when turn on thepower supply. Stay at the home page and enter the APP adding lighting device interface, click “Lighting(Bluetooth)”.
3. If the Smart Bulb is not flashing when turn on the power supply, long press the Reset button for more than 6 seconds. While Smart Bulb flashing, select “confirm the light has flashed”,
4. then click “Next”.
   Select the Wi-Fi connected to the smart device, input the Wi-Fi password, and then click “Next” to wait for the matching to succeed.

Stay at the Home Page

Manually Bluetooth

Searching

Searching

Add Device

Enter/Confirm Wi-Fi Password

DEVICE PAIRING-AP PAIRING

1. Turn on the Smart Bulb and enter the home of APP while ensure Bluetooth on and the WIFI signal is good and stable.
2. Smart Bulb will flashing when turn on the power supply. Stay at the home page and enter the APP adding lighting device interface, click “Lighting(BLE+Wi-Fi)”.
3. If the Smart Bulb is not flashing when turn on the power supply, long press the Reset button for more than 6 seconds. While Smart Bulb flashing, select “confirm the light has flashed”, then click “Next”.
4. Select the Hotspot connected to the smart device, input the Wi-Fi password, and then click “Next” to wait for the matching to succeed. (Make sure smart devices share the same Wi-Fi)

CONTROL DEVICE

After the device is connected successfully, tap “Device” at the bottom. The device name of the smart lamp shows in the list. Tap it to enter the control panel of the smart lamp.

1. White mode: Adjust brightness and color temperature of white light.
   
2. Color mode: Adjust color, brightness, saturation
   
3. Scene mode: Eight scenes modes (4 static & 4 dynamic).
   
4. Schedule: This will keep the bulb in ON/OFF position for a specific duration of time.
   
5. Grouping: If you got two or more light, please tap “…” at the upper right cornor of the control panel and create group. The smart lamp group will realize synchronous switch, color changes,the scene mode selection, timer, etc.
   
6. Music mode: You can minimize the Tramsmart App to play music from any source. Your Smart Bulb will automatically synchronize and change color to the music.
   

APP FUNCTION INTRODUCTION

Click the interface to control it according to the specific mode of the specific Smart Bulb. The following is public function introduction.
Remote control: The Smart Bulb can be controlled anywhere after the smart device is successfully
Timer function: Set the timer to turn on and turn off the Smart Bulb.
Intelligent scene: The system sets a variety of intelligent scenes, and different scenes correspond to different
Group: Group control is available(only for the same type of product). Family room management.
Device Sharing: The device is shared with other user control devices in the home.

THIRD PARTY CONTROL

In the Tuya Smart APP: Find more service in “Me” menu, click to enter “voice service” (Alexa/ Google Assistant) and other services, click on the service you need.
Connect to the third-party service device according to the operation guide.

For any product and APP updating, please contact with customer service.

Rondoo DL

		Warning: When replacing a halogan lamp, wait for it to cool, for a minimum of 5 minutes
	Overall Sizes:

Web: WWW.QAZQA.COM

Pua HL Black 60

SAFETY INSTRUCTION

Please study the instruction manual and below information carefully before installing or using this product. Please keep this user manual for further reference

1. The luminaires may only be installed by authorized and qualified technicians according the valid regulations for electrical installation.
2. Maintenance of the luminaires is limited to their sur faces. During maintenance no moisture can come into contact with any areas of the terminal connections or voltage control parts.
3. The electrical supply must be switched off at the outset, preferably by means of a switch in the distribution box, before any installation, maintenance or repair work is undertaken.
4. Exterior lighting must not be installed during rain.
5. Take account of the minimal separation distance from other objects and the room required around the fitting.
6. If in any doubt, consult a professional, taking local installation requirements into account. Some countries stipulate that lighting may be installed only by registered installers.
7. Clamping screws in electrical connections must be adequately tightened. This is particularly the case with 12V low voltage conductors.
8. When replacing a halogen lamp, wait for it to cool, for a minimum of 5 minutes.
9. Clean with a clean, dry cloth or brush, use no solvents or abrasives. Avoid dampness on all electrical components
10. Take account of all available technical information.
11. Take note of the symbols when connecting wires:
    N =Neutral L =Live =Earth
12. Meaning of symbols

	For indoor use only, where direct contact with water is impossible
	This icon indicates the level of water-proof and dust-proof
	Protection Class I: the fitting must be earthed
	Protection Class II: the fitting is doubled insulated and does not require earthing
	Protection Class III: the fitting is low voltage
	Minimum distance from lighted objects (meters)
	Only the self-shielded halogen lamp should be used with the luminaire
	Strip the wire to the indicated length (mm); different items require different length
	Connect using the specified cable; different items require different cables
	The type of lamp and maximum size and wattage indicated in each lighting unit must not be exceed; different items require different kind of light sources with different bulb icons
	The armature is designed to work only with the indicated voltage. Different items require different working voltage.
	The luminaire can be used in combination with a dimmer
	The reference light angle and light space of the luminaire
	This luminaire cannot be disposed together with normal domestic waste in standard rubbish can, but you have to bring it to a staging area for electrical waste

WWW.QAZQA.COM