O-Cedar 35003355 Spin Mop System

TO ASSEMBLE

INSTRUCTIONS

1. Remove clean water tank from the bucket.
2. Ensure water release lever is down in closed position. Remove blue fill cap and fill tank with water.
   (Optional: Add favorite cleaning solution to water.)
3. After filling, close the blue fill cap and place clean water tank back into bucket
4. Lift the red water release lever to open. The rinsing chamber will fill with clean water. Red lever can remain open.
5. Place mop inside rinsing chamber. Twist mop to wet/rinse the mop head
6. Place wet mop inside wringer.
7. Loosely hold handle vertically to allow mop to spin.
8. Push pedal to customize moisture level.
9. Mop floor and repeat steps 5-8 as needed.

USE & CARE

To remove
Step on mop strands and tilt handle away from your foot to separate base from mophead.

To wash
Machine or hand wash in warm water and lay flat to dry.
*Do not use fabric softeners or bleach.

To replace
Align microfiber mophead with base and push down until it snaps securely in place

WARNING: Keep hair, loose fitting clothing, fingers and all body parts away from moving parts. Closely supervise children and pets when using RinseClean to avoid injury.

Refills available For best results replace refill every 3 months.

Find out more about our full assortment at

WARNING: Keep hair, loose fitting clothing, fingers and all body parts away from moving parts. Closely supervise children and pets when using RinseClean to avoid injury.

People have trusted O-Cedar® for over 115 years to help get their cleaning jobs done right. If you are not completely satisfied, please contact us through our website, Facebook page or by calling 1-800-543-8105

©2021 Freudenberg Household Products LP Attn: Consumer Affairs, 2188 Diehl Road, Aurora, IL 60502 1-800-543-8105 EPA Est. No. 99733-CHN-1