MVMT B07HFHWKJK Bling Bling Karaoke Microphone and Speaker

CONTROL PANEL

WIRELESS KARAOKE

1. Make sure the unit’s battery is charged. Hold the M/POWER button to start the product.
2. Wireless connection: Enable Bluetooth from your mobile device, connect to the microphone. A prompt tone will notify you of a successful connection.
3. Adjust sound: Use the Mic Volume / Reverb Volume slider to adjust the volumes to a suitable level.
4. Start Karaoke.

RECORDING WITH MOBILE PHONE

1. Connect the recording wire: Insert the MICRO USB plug of the recording wire Into the MLCEI Interface of Karaoke Treasure and 3.0mm Interface into the earphone lack of the mobile phone.
2. Open the Karaoke software on the mobile phone (or other recording Apps), select your favorite song, record the song using the method mentioned above.
3. Test and save the song; Operate according to the Instructions of Karaoke software.

SELFIE FUNCTION

1. Press the M/POWER button to switch from wireless mode to self* mode.
2. Enable wireless from your mobile device and search “Shutter, click connect.
3. Open the photograph interface of your mobile device, press the isi/v+ or er/v-button to take photos.

Note: 422 or higher version for Android system, 6.0 or higher version for the iOS system, It does NOT support other versions temporarily. It doesn’t support the mobile phone which has an independent and physical photograph button.

TECHNICAL PARAMETERS

©2021 Argento SC. All Rights Reserved. MVMT and MVMT logo are registered trademarks of Argento SC. Apple, the Apple logo, and (Phone are trademarks of Apple Inc., registered in the U.S. and other countries. App Store is a service mark of Apple Inc., registered in the U.S. and other countries. Google Play and the Google Play logo are trademarks of Google Inc. Other trademarks and registered trademarks are the property of their respective owners.
Because of continuous improvements, the images and the specs on the packaging may differ slightly from the actual product.
Warning: The artwork and design of this package are protected by United States Copyright law and may not be reproduced, distributed, displayed. Published, or used for any purpose without prior written permission. You may not alter or remove any trademark or copyright notice from this package.
Warning: Cancer & Reproductive Harm — www.P65WamIngsta.gov
FCC ID: 2A 20A -ASCKAR A

FCC Caution
Any changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment. This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions:

1. This device may not cause harmful interference. and
2. this device must accept any interference received, including interference that may cause undesired operation.

IMPORTANT NOTE:
This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part IS of the FCC Rules. Those limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates. uses and can radiate radio frequency energy a W not installed and used in accordance with the instructions. may cause harmful interference to redo communications. H1MWMI. there is no guarantee that interference will not mos in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

• Reorient or relocate the receiving antenna
• Increase the separation between the equipment and the receiver.
• Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.

FAQS

Do you sell replacement chargers?

Yes, they are a common charging cord it’s called a “micro USB”cable and can be purchased every where. CVS, Walgreens, 7-11, Amazon most every where sells them and should cost less than $5.00

Does this mic have a case for storing?

It Doesn’t come with a separate case for storing, We recommend storing it in the box it came in, it’s a very durable box and great for storing.

What do I need to charge it?

The microphone comes with a micro USB cable to charge it. The smaller end connects to the smaller port on the bottom of the mic handle. The larger tip you plug into a usb charger. Most people use there phone charging block.

What apps does the microphone work with?

There are a lot of free apps, we recommend going to you tube, type in the artist name with the word “Karoke” and the words will come on the screen and you can do karoke that way. It works great

Does this need to be plugged in/wired to anything, including a phone, to speak in a small group? After charging– Work by itself?

It will also work by itself, you would only sync Bluetooth if you wanted to have the music come through the speakers.

Does this work with kindle?

If your kindle is Bluetooth it will work

How long the batterie last?

Fully charged the battery last 2 hours

does it require a battery?

The battery is built into the microphone and comes with a charger

In this be paired with an external bkuetooth speaker?

this device cannot be hooked up to an external speaker. It is a speaker itself so the microphone will need to be hooked up with a source that will play music Mobile phone, tablet, iPad , anything that is Bluetooth and will stream music.

How do you get your own voice to amplify without an echo?

Turn down the echo control.

Can you use two microphones at the same time?

No, you won’t be a able to use 2 microphones at the same time if you are syncing them up to a Bluetooth device. Yo will be able to use them if you are NOT syncing them too a Bluetooth device

can I play my original mp3 songs in this micrphone?

If your MP3 is on a USB drive you can plug it into the button of the mic where the usb slot is

Can you sync two microphones at same time, so a duet can be done?

You won’t be able to sync both microphones together. Each one will have to be used on it’s own

Why does the voice coming through the microphone not match the voice of the singer?

You have to lower the echo feature on the mic

ØPHI Bluetooth Speaker
WATER RESISTANT WEATHERPROOF WIRELESS SPEAKER
5W Dynamic Sound

IMPORTANT: PLEASE READ BEFORE USING THIS PRODUCT

FUNCTION PANEL

1. Power switch, long press to turn on / off short press to change mode: BT Mode when calling, press one time for answer the phone press again for reject the calling ; Music mode click twice to call the latest call;
2. Mode key, Short press to change mode
3. LED indicator: Blue: working indicator/ Rethcharging mode
4. MICRO 5P port
5. USB card port, support MAX 32G flash, Compatible with WAV/FLAC/MP3 files.
6. AUX mode, support external audio source input with standard DC3.5MM, compatible for mobiles/MP3/ Computers/tablet PC etc; Standard DC3.5 jack product, (when put in line cable,turn on will the opportunity to go directly to the LINE mode. When you want to switch to another mode, please pull out the LINE line
7. MIC Jack
8. Short press to volume up, long press to change into next song
9. Short press to volume down, long press to change into last song
10. TF card port, support MAX 32G flash, Compatible with WAV/FLAC/MP3 in high fidelity music files When there is a warning sound when playing, it is power low, please charge the speaker.

Bluetooth® CONNECTION

1. Once the unit turn on, Press and hold the on/off button. Blue indicator light will flash rapidly to detect nearby Bluetooth enabled devices.
2. From your device’s Bluetooth menu, select the speaker. MV_SP3571 3 . Once unit is successfully paired and connected, Tone will sound from the speaker. 4 . Remember to turn the speaker off after each use.

Box Includes: PHI Bluefooth Speaker & Micro USB Charging Cable and User manual

CHARGING

1. Using a Micro-USB cable (included), insert the jack into the port on the covered compartment of unit and then plug the USB connecter into USB port on the power source.
   * Be sure to use a 5V/1.5 mAh charging source.
   * Charging with the source of more voltage will damage the product.
2. Charge the device until the red LED indicator turns off. 3 . Always disconnect the cable when charging is finished.

Note: It will take approximately 2 hours to achieve a full charge.

TROUBLE SHOOTING

No power

• Recharge your speaker using the micro-USB cable. If the problem persists, try using another micro-USB cable.

No response from the unit

• Ensure your Bluetooth device supports an A2DP, AVRCP, or HFP profile.
• Check if both devices are paired and connected to each other.
• Restart the device and try to reconnect.

If this unit is exposed to too much water and stops playing, shake the water out and leave it for a few seconds.

FCC Disclaimer:

This device Complies with Part 15 of the FCC Rules.

Operation is subject to the following two conditions:

1. This device may not cause harmful interference, and
2. This device must accept any interference received, including Interference that may cause undesired operation.

The manufacturer is not responsible for any radio or TV interference caused by unauthorized modifications to this equipment. Such modifications could void the user authority to operate the equipment. This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications.

However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
• Consult the dealer or on experienced radio/TV technician for help or assistance.

This device complies with Part 15 of the FCC Rules and Industry Canada license-exempt RS5 standard(s). Operation is subject to the following two conditions;

1. This device may not cause harmful interference, and
2. This device must accept any interference received, including interference that may cause undesired operation.

The manufacturer is not responsible for any radio or TV interference caused by unauthorized modifications to this equipment. Such modifications could void the user’s authority to operate the equipment. Under Industry Canada regulations, this radio transmitter may only operate using an antenna of a type and maximum (or lesser) gain approved for the transmitter by Industry Canada. To reduce potential radio interference to other users, the antenna type and its gain should be so chosen that the equivalent isotopically radiated power (e.i.r.p.) is not more than that necessary for successful communication.

Electronic and electrical devices disposal

This symbol indicates that electrical and electronic device is to be collected separately.

• This product is designated for separate collection at an appropriate collection point. Do not dispose of as household waste.
• If the device use batteries, they must be removed from the device and disposed in a appropriate collection center.
• If the batteries cannot be removed, do not attempt to do it yourself since it must be done by a qualified professional. Separate collection and recycling helps conserve natural resources and prevent negative consequence for human health and the environment that might result from incorrect disposal.
• For more information, contact the retailer or the local authorities in charge of waste management.

SPECIFICATIONS

• Model NO: SP3571
• Working Distance: Approx. 33 ft
• Playback Time: Approx. 4 Hours
• Charge Time: 2 Hours
• Speaker Output Power: 5 W
• Speaker Impedance: 4 0
• Battery: 1200 mAh Lithium (Rechargeable)

MVMT
@2022 Argento SC•. All rights reserved.
Distributed by Argenta SC, New York, NY 10018
www.argentosc.com | [email protected]
MVMT and MVMT logo are registered trademarks of Argento SC, Inc.
The Bluetooth° word mark and logos are registered trademarks owned by Bluetooth SIG, Inc. and any use of such marks by Argento SC is under license. Designed in USA, Made in China. The artwork and design of this package are protected by United States Copyright law and may not be reproduced, distributed, displayed, published, or used for any purpose without prior written permission. You may not alter or remove any trademark or copyright notice from this package. ØFHI and its logo are trademarks of Argento SC.