MD2296-24K INSTALLATION INSTRUCTION

If you have any questions, please contact us via customerservice@mountingdream.com or call us at telephone (626) 604-9048 (USA) Mon – Fri 10am – 6pm (Pacific time). For more information, please visit our website: www.mountingdreamonline.com

Before getting started, let’s make sure this mount is perfect for you!

1. Is your TV VESA equal to/greater than 200x100mm/8×4″ and equal to/less than 600x400mm/24×16″?
   
2. Does your TV (including accessories) weigh less than 100 LBS (45.5 KG)?
   
3. What is your wall made of?
   
4. Installation Tools (Not Included)
   
5. Safety Caution

Please read this instruction carefully before installation. If you do not understand these instructions or have doubts about the safety of the installation, assembly or use of this product, contact Customer Service via customerservice@mountingdream.com or call us at telephone (626) 604-9048 (USA) Mon – Fri 10am – 6pm (Pacific time).

• This product is designed for use in wood stud and solid concrete wall.
  – DO NOT install into drywall alone.
• The wall must be capable of supporting five times the weight of the TV and mount combined.
• Do not apply this product to any purpose not indicated by Mounting Dream.
• Incorrect installation may result in product damage or body injury. Mounting Dream shall bear no responsibility for any damage or injury resulted from incorrect installation, incorrect assembly or misuse.

STEP 1 Attach Brackets to TV

Parts and Hardware
WARNING:This product contains small items that could be a choking hazard if swallowed. Before starting assembly, verify all parts are included and undamaged. For parts shortage or damage, please contact us via customerservice@mountingdream.com.
NOTE: Not all hardware included will be used.
1-1 Select TV Screws

1-2 Need Spacer?

1-3 Attach the TV Brackets

Tips: If you need to combine M6(e) or M8(c/f) screw with 2.5mm spacer(j), you have to remove the inner circle.

STEP 2 Attach Wall Plate to Wall

For wood stud installation, follow STEP 2A
For concrete installation, follow STEP 2B on PAGE 6

Parts and Hardware

Concrete wall anchor (NOT INCLUDED)

Contact us at telephone (626) 604-9048 (USA) Mon – Fri 10am – 6pm (Pacific time) or email us by customerservice@mountingdream.com to have these additional pieces shipped directly to you.

Assemble Wall plate

STEP 2A Wood Stud Installations

CAUTION: To avoid potential personal injury or property damage:
All 4 lag bolts MUST BE firmly tightened to prevent unwanted movement of the wall plate assembly. Ensure the wall plate assembly is securely fastened to the wall before continuing on to the next step.
To prevent the TV falling down, the Bolt Head Must Keep UP at this step!!

STEP 2B Wood Stud Installations

CAUTION: To avoid potential personal injury or property damage:
All 4 lag bolts MUST BE firmly tightened to prevent unwanted movement of the wall plate assembly. Ensure the wall plate assembly is securely fastened to the wall before continuing on to the next step.
To prevent the TV falling down, the Bolt Head Must Keep UP at this step!!

STEP 3 Hang and Secure TV to Wall Plate

3-1 Extension Arms Assembly

3-2 Wall Plate Installation Integrity Test
Before hanging TV, please conduct “wall plate installation integrity test” first.
3-3 Hang and Secure TV to Wall Plate

STEP 4 Adjustments

4-1 TV leveling adjustment (±3°): Loosen 4 leveling bolts on the rear of TV plate by maximum 2 turns, adjust to level, and retighten to secure.
4-2 Tilting angle adjustment (+5°/-15°) Loosen handle and tilting bolt, adjust TV to your desired position, then tighten handle and tilting bolt.
Allen key storage: For easy adjustment, you might put the Allen key on the wall plate as illustration.

Product dimensions:

If you have any questions, please contact us via customerservice@mountingdream.com  or call us at telephone (626) 604-9048 (USA) Mon – Fri 10 am – 6 pm (Pacific time).
For more information, please visit our website:www.mountingdreamonline.com

Before getting started, let’s make sure this mount is perfect for you!

1. Is your TV VESA equal to/greater than 200x100mm/8×4″ and equal to/less than 600x400mm/24×16″?
2. Does your TV (including accessories weigh less than 132 LBS (60 kg)?
3. What is your wall made of?
4. Installation Tools (Not Included)
5. Safety Caution

Please read this instruction carefully before installation.
If you do not understand these instructions or have doubts about the safety of the installation, assembly or use of this product, contact Customer Service via customerservice@mountingdream.com or call us at telephone  (626) 604-9048 (USA) Mon
– Fri 10am – 6pm (Pacific time).

•  This product is designed for use in wood studs and solid concrete wall.
  – DO NOT install into drywall alone.
•  The wall must be capable of supporting five times the weight of the TV and mount
  combined.
• Do not apply this product to any purpose not indicated by Mounting Dream.
• Incorrect installation may result in product damage or bodily injury. Mounting Dream shall bear no responsibility for any damage or injury resulted from incorrect installation, incorrect assembly or misuse.

STEP 1. Attach Brackets to TV

Parts and Hardware
WARNING: This product contains small items that could be a choking hazard if swallowed. Before starting assembly, verify all parts are included and undamaged. For parts shortage or damage, please contact us via  customerservice@mountingdream.com.
NOTE: Not all hardware included will be used.

STEP 2. Attach wall Plate to wall

For wood stud installation, follow STEP 2A
For concrete installation, follow STEP 2B on PAGE 6

STEP 2A. Wood Stud Installations

CAUTION: To avoid potential personal injury or property damage:
All 4 lag bolts 01 MUST BE firmly tightened to prevent unwanted movement of the wall plate assembly.  Ensure the wall plate assembly is securely fastened to the wall before continuing on to the next step.

STEP 2B. Solid Concrete Wall Installation

CAUTION: To avoid potential personal injury or property damage:
All 4 lag bolts 01MUST BE firmly tightened to prevent unwanted movement of the wall plate assembly. Ensure the wall plate assembly is securely fastened to the wall before continuing on to the next step.

STEP 3. Hung and Secure TV to wall Plate.

STEP 4.Take Down the TV from the Mount.

Product dimensions: