INTRODUCTION: PRODUCT & CLASSIFICATION

This product measures body temperature by collecting the infrared thermal radiation from a human’s forehead. While producing quick and accurate measurements, it is simple and convenient to operate.

Scope of Use: Measuring the forehead thermal radiation of a human subject in order to determine the subject’s body temperature.

FUNDAMENTAL WORKING PRINCIPLES

Objects emit infrared thermal radiation energy. Their radiation energy wavelength and level are directly determined by their surface temperature. Based on this principle, the design of this product adopts a high-precision infrared sensor, used for detecting the infrared radiation energy emitted by the human body with the wavelength of 5~14um.Through accurate calculation, compensations and correcting agents, this product accurately measures human body temperature.

PRODUCT FEATURES

• Stable and reliable high precision infrared sensor
• Environmental temperature adaptability, enabling the product to be used across a variety of environments
• Automatically saves the last temperature measured
• Two unit options of measurement: Celsius and Fahrenheit
• Shuts down automatically to save battery energy

TECHNICAL PARAMETERS

COMPONENTS

1. Infrared detector
2. LCD Screen
3. Down key
4. Up key
5. Set key
6. Measuring key
7. Battery cover

FUNCTION SETTINGS

The product provides three function settings which include:

1. Switching the unit of temperature
2. Turning the audio on/off
3. Switching the measurement modes

Comparison table of function settings:

Temperature Unit settings (F1):
When the thermometer is turned on, press the “SET” key. Hold until the LCD displays “F1”. And then press the “+”key or”-“key to switch to “°C” or “°F”.

Audio settings (F2):
When the machine is turned on, press the “SET” key until the LCD displays”F2″. And then press the “+”key or “-“key to turn the sound on/off.

Measurement Mode settings (F3)
When the machine is turned on, press the “SET” key, until the LCD displays “F3”. And then press the “+”key or “-“key to switch between Body and Surface modes.

MEASUREMENT METHOD

Measuring Body Temperature:
Make sure the measurement mode is set to body mode. Aim the probe of the thermometer at the center of the subject’s forehead and maintain a vertical distance of about 1cm ~ 5cm. After pressing the measurement button for one second, there will be a “di” sound; the measured value is displayed and the test is completed. If the measured temperature is abnormal, it will be followed by a “di…Beep” sound. The LCD screen will display different colors according to different temperatures:

Green: Normal Temperature
Orange: Low Fever
Red: High Fever or Test Exception

When the change of the environment’s temperature has a great impact on the forehead temperature, first align the thermometer with the earlobe and then take the subject’s temperature.

Measuring Surface Temperature:
Make sure the measurement mode is set to surface mode. Point the probe of the thermometer at the object to be measured and maintain the vertical distance of about 1cm ~ 5cm. After pressing the measurement button for one second, there will be a “di” sound. The measured value is displayed and the test is completed.

Tips:

1. Keep the inner cavity of the sensor and probe clean before and after use.
2. Store the thermometer in a stable temperature environment. When the ambient temperature changes drastically, let the thermometer sit for about ten minutes prior to use.
3. Do not measure the body temperature immediately after measuring the temperature of an extremely high or low temperature object.
4. If the measurement object comes from an environment with a great difference from the current test environment temperature, let the thermometer sit in the test environment for at least five minutes.
5. Avoid taking measurements when the forehead is exposed to wind, water, sweat, or has applied cosmetics. Do not take measurements within 30 minutes of exercising, showering, or eating.
6. Do not disassemble or modify the machine, otherwise it will cause inaccurate measurement results.

MAINTENANCE AND PRECAUTIONS

1. Keep the inner cavity of the sensor and probe clean, otherwise the accuracy of measurement will be negatively affected. Use a clean soft cloth, cotton swab or medical alcohol wipes to clean the areas exposed to dirt. Allow to dry before use.
2. Read this manual carefully before use to make sure the battery is properly installed.
3. Do not immerse the thermometer in liquid. Do not leave it in high or low temperature environments for a long period of time.
4. Do not collide, drop or put sharp objects in the thermometer. Do not disassemble yourself.
5. It is recommended to practice using the thermometer several times to get familiar with the measurement methods. Try not to change the factory settings.
6. Measurements are not a substitute for a physician’s diagnosis.
7. Please contact the seller or manufacturer if there is any trouble during use.
8. Please dispose of the waste and residue at the end of the service life of the product accordingly with local laws and regulations.

TROUBLESHOOTING

PRODUCT SPECIFICATIONS

Power Rating:                                        4.3 | 4.9 | 5.9 | 7.5 | 8 W
Max. Fan Flow Rate:                             2.05 m³/min
Service Value:                                       17 (m³/min)/W
Fan Sound Power Level:                       27 | 29 | 31 | 34 | 35 dB(A)
Max. Air Velocity:                                 2.2 | 2.6 | 3 | 3.3 | 3.4m/s
Stand-By Power Consumption:             0.12 W

LIMITED LIFETIME WARRANTY

Your Medic Therapeutics Portable AC unit is backed by a limited lifetime manufacturer’s warranty. Medic Therapeutics will repair or replace your device at any time should it fail due to a defect in material or workmanship, subject to the certain limitations. This limited warranty does not cover any damage that results from unauthorized or improper use, service, or repair. Further, it does not cover damage caused by accident, impact, negligence, or normal wear and tear. Should you discover your Medic Therapeutics Portable AC unit is not functioning properly, please send your device to our repair center for evaluation. If your product cannot be repaired or serviced, we will reserve the right to change it for a similar or newer model. Please note that a flat rate of $35.00 will be charged to cover a service evaluation fee and return shipping of your device. All warranty claims must be accompanied by a copy of your proof of purchase from an authorized retailer. Please send your device, proof of purchase, and a check or money order in the amount of $35.00 made out to Medic Therapeutics to:

Address:
Medic Therapeutics Service Center 3069 Taft Street Hollywood, FL 33009
Contact:  [email protected]

DEVICE AND USAGE INFORMATION

• Only use the AC unit in a dry, indoor environment.
• The unit must be plugged-in in order to operate.
• The unit is designed to be safely used with low voltage.
• The unit feature 5 different fan speed output levels for comfort.
• The unit includes a water tank for humidifying the room air.
• The touch display allows for easy settings selection.
• The unit offers an oscillation feature with simultaneous ventilation.
• The fan may be adjusted.
• The humidifying feature can enhance cooling effect.

SAFETY INFORMATION

•  Individuals with limited physical, visual and metal capability should not use unless under supervision.
• The AC unit is only completely off when unplugged from the outlet.
•  The manufacturer is not responsible for any damage incurred by not following manual guidelines.
•  The filter is designed specifically for this product so in the event it needs to be replaced, please purchase from the manufacturer.
•  If the unit won’t be in use for an extended period of time, empty the water tank, and run the fan on the highest setting for 4 hours to completely dry out the unit and filter. Then store in a cool, dry space.
• Use only with supplied power adapter and cord.
• Do not use near flame or fire source.
• Do not submerge in water or other liquids.
•  Do not turn the device upside down.
• Do not block the front or back grills of the device.
• Do not place any items on top of the device.
• Do not place any foreign objects in the device.
• Do not use anywhere where there is a danger of the device being kicked or knocked over.
•  Do not use near a heater or electrical equipment.
•  For best results, place device on a high surface or table.
•  Always unplug when replacing the filter, cleaning, or moving the device.

TIPS

• Use on table, desk or countertop.
•  After filling the tank, for efficient cooling, allow the filter to absorb water for 3 minutes before use.
•  Remaining within 3 feet of the device will maximize the cooling benefits.
•  Set on low, the device can run for up to 8 hours from a single filling of the tank.

SET-UP

•  Place the unit on a flat surface.
•  Open the tank door and fill with water.
•  Plug USB power adapter into an outlet. Then, insert the larger USB end of the cable into the adapter and the smaller end into the power port in the back of the unit.

OPERATION

1.  Control Button
2.  Water Tank Cover
3. Front Panel
4. Back Panel
5.  Front Grill
6. Water Level Window
7.  Water Funnel
8.  Adapter
9.  USB Cable
10. Temperature Display
11.  Light Button – Select your light color by pressing this button. You can choose either one color or to cycle through the colors
    
    Color Order:
    1. Press for 1 second for color cycle
    2. Press for 2 seconds for a specific color.
    3. Press for 3 seconds to turn the color light option off.
12.  On/Off Button
13. Cooling Mode
14. Fan Speed Button

• The device has 5 fan speed modes.
•  The device has an airflow indicator light.
•  It is recommended to run the unit on
•  HIGH mode for 5 minutes prior to turning off to allow it to dry.

MAINTENANCE

• Clean with tank once per week with a clean cloth and mild soap.
• Replace filter every 6 months.

Changing the Filter:

1. Unplug the AC unit from wall.
2.  Gently press and release the tab on the bottom of the front grill and pull down away from device and set it aside.
3.  Carefully slide the filter out of the device.
4.  Place new filter in the device as per the indications on the new filter.
5. Insert the top tab of the grill into the slot and press the release tab back into place.

•  This device and batteries must be disposed of as per local environmental law at the appropriate recycling center.