FS52 User Manual v1.0

All-In-One High Resolution
22MP Film Scanner

Thank you for your purchase of this Magnasonic product. Please read this user manual carefully before using product to ensure proper use. Keep this manual in a safe place for future reference.

magnasonic.com/support

Since 1954, Magnasonic has been a leader in developing innovative and unique products. We are dedicated to empowering people using six key fundamentals: superior quality, performance,
simplicity, style, value and a fanatical obsession with outstanding customer service. At Magnasonic, our mission is a simple one ­ create people-driven products that make life’s daily
adventures easier and more fun. We believe everyday experiences should be extraordinary.

Thank you for your purchase of this Magnasonic® product.
We hope you enjoy your experience.

Questions?
Give us a chance to help, we’re just a click away.

www.youtube.com/magnasonic

Magnasonic.com/support

Magnasonic.com/contact

Don’t forget to register your product with us!
Magnasonic.com/registration

What’s Included

Film Scanner   Power Adapter    USB Cable    TV Out Cable

Cleaning Brush

User Manual   Negative Adapter   Slide Adapter

110 Slide Insert     110 Film Insert    Super 8/8mm Insert

4

Product Information

Front

Back

5

Operating Instructions

Powering on the Scanner

1. Connect the USB cable to the USB port on the film scanner.
2. Connect the other end of the USB cable into the included USB wall adapter. Plug the wall adapter into a power outlet.
3. Press and hold the Power button on the scanner to turn it on.

Changing the Language

1. On the Main Menu, go to LANGUAGE and press OK.
2. You may now select the language of your choice by using the < and > buttons to scroll between the available selections.
   • English • Deutsch
   • Espanol • Japanese
   • Francais • Chinese
3. Press the OK button to select the language.

6

Prepping Your Film/Slides

IMPORTANT: Ensure your slides/film are clean and free of dirt or debris.

1. Open the appropriate slide/film adapter and insert your slide/film. Each adapter is labelled to identify it. If you are not certain of your slide/film type refer to the images below.
2. Ensure the slide/film is facing the correct way and is not bent.
3. Close the slide or film adapter and press the edges so that it locks into place.

Slide Types                            Film Types

35mm Slide (135)            135 Negative (35mm)

110 Negative

110 Slide                                      126 Negative

126 Slide                      8mm                           Super 8

7

Slide Adapters

35mm Slide (135)

110 Slide

126 Slide

110 Slide

8

Negative Adapters

135 Negative (35mm)

110 Negative

126 Negative

8mm

Super 8

9

Preparing the Film Scanner

1. Press and hold the Power button on the scanner to turn it on.
2. Insert the prepared film or slide adapter into the slot on the right side of the film scanner.
3. In the Main Menu use the arrow keys to highlight the FILM TYPE option and press the OK button to select it.
4. Use the > arrow key to cycle through Negatives, Slides, or B&W. Press the OK button to select it.
5. The next screen will show the different sizes of your selection. Use the > arrow key to select the correct size and press the OK button.

Cleaning and Care

Use the included cleaning brush to ensure there is no dust or debris on the lens. Insert the soft end of the brush, face down, into the film/ slide holder slot. Carefully push the brush around inside to get rid of any dust or debris that may be on the lens.

10

Using an SD Card

Note: This scanner has 64MB of built-in memory for saving scanned images. This film scanner will also accept SD, SDHC, and SDHX cards with a maximum of 128GB for extra memory. If you are using a 128GB SD card, it may need to be formatted before using for the first time. Please see below for formatting instructions.

1. Insert the SD card, label up, into the SD card slot located at the back of the film scanner. The SD card will click in if inserted properly.
2. Remove the SD card by pressing on it until it clicks and pops out, then remove it from the slot.

Formatting Your SD Card

WARNING: Formatting your SD card will delete all files stored on the SD card. Download your files from your SD card to your computer before formatting.

1. In the Main Menu, go to FORMAT SD. Press the OK button.
2. When prompted if you would like to format the SD, use the < button to choose “Yes”. Press the OK button to begin formatting the SD card.

11

Scanning Your Images

1. Press the SCAN button to enter Capture mode.
2. You should now see your film or slide image on the screen and the corresponding film/slide type is listed at the top right corner.
3. To adjust Brightness or Color, press the OK button. Use the left/ right arrows to move between Brightness (EV), Red (R), Green (G), or Blue (B). Press the OK button to adjust them individually.
4. Once all settings are correct, press the SCAN button to return.
5. You can also mirror or flip your image before scanning by pressing the < or > buttons.
   < ­- Flip
   > ­- Mirror
6. Once ready, press the SCAN button to capture and save your image to the internal memory or SD card if one is inserted. The FS52 cannot scan directly to a computer.
7. If you have multiple slides/negatives you can push/pull them through the adapter without removing it. See image below for reference.
8. You can press the HOME button to return back to the Main Menu when your scanning is done.

12

Viewing Your Scanned Images

1. To view your saved images, go to GALLERY and press the OK button.
2. Your images will play automatically in Slideshow mode.
3. To manually review your saved images and stop the auto-play, press the OK button.
4. Use the left and right buttons to scroll through each saved image.
5. Press the OK button again to open the Gallery options. You can choose to either go back to Slideshow mode, delete the image, or return to the Main Menu.

Downloading Images to Your Computer

1. Ensure your computer is powered on.
2. Connect the film scanner to your computer via the included USB cable.
3. Power on the film scanner.
4. In the film scanner menu, select USB UPLOAD.
5. A new folder will appear on your computer. Your saved images can be found here. You can now move these images from your scanner directly onto your computer.

Watching Saved Images from a TV Screen

1. Turn on the film scanner.
2. Connect the included TV Out cable to the TV Out port on the back of the film scanner.
3. Connect the other end of the cable into the Video input on your TV.
   Note: When you connect the film scanner to your TV, the scanner’s LCD screen will turn off automatically.
4. Ensure that your TV is set to the proper input/video source.
5. You should now see the film scanner’s screen on your TV screen.

13

FAQ / Troubleshooting

14

Specifications

15

Important Safety Instructions

Safety Alerts

If any of the following conditions are present, stop using immediately, unplug the power cord, and refer to a qualified service professional for servicing:

a. If there is any smoke or unusual smell while using.
b. If the product has been exposed to rain, water, or other liquids.
c. If the product does not operate normally by following the operating instructions.
d. If the product exhibits a distinct change in performance.
e. If the product has been dropped or damaged in any way.

Best Practices for Safe Use

1. Only use films of standard size.
2. Only use attachments/accessories specified by the manufacturer.
3. Unwind and straighten the USB cord before use.
4. Check that the power voltage stated on the rating label corresponds to your local electricity supply.
5. Unplug the power adapter from the wall when the product is unused for a long period of time and during thunderstorms.
6. Do not use this product near water.
7. Do not immerse this product, the power cord, or any accessories in water or any other liquid.
8. Do not block any ventilation openings. Install in accordance to the manufacturer’s instructions.
9. Do not place this product near any heat sources such as radiators, heat registers, stoves, or other apparatus (including amplifiers) that produce heat.
10. Do not attempt to service or disassemble this product yourself as opening or removing covers may expose you to dangerous voltages or other hazards.

Cleaning and Care

1. Please make sure the scanner is clean before using.
2. Do not use liquid cleaners.
3. Clean outside of the product only with a dry cloth.
4. Do not clean the inside of this product with anything except for the included cleaning brush.
5. To clean with the included cleaning brush, insert the soft end of the brush into the film/slide holder slot. Carefully push the brush around inside to get rid of any dust or debris that may be on the lens.

16

FCC Information

This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.

NOTE: This unit may contain a microcomputer for signal processing and control function. In very rare situations, severe interference, noise from an external source, or static electricity may cause it to lockup. In the unlikely event that this should happen, turn off the unit, wait at least five seconds, and then turn it back on again.

We reserve the right to change models, configurations, or specifications without notice or liability. Product may not be exactly as shown. © MAGNASONIC®, MAGNASONIC®, the MAGNASONIC® marks may be registered. All other trademarks are property of their respective owners.

17

Magnasonic® Warranty

Thank you for choosing Magnasonic. We guarantee your investment in our products is a solid one! Extensive thought, research, planning, and design goes into every product we make. High quality components combined with precision manufacturing allows us to maintain the highest possible production standards. All items are guaranteed against defects in materials and craftsmanship. Magnasonic products come with a complete one year parts and labour warranty. Proof of purchase from an authorized Magnasonic dealer is required when seeking warranty assistance.

Magnasonic has outstanding quality control, if something should go wrong with any of our products, we will repair it free of charge! If the product cannot be repaired, we will replace the product. If the product has been discontinued, we will replace the product with either the newest version of said product or current equivalent. Replacement parts furnished in connection with this warranty shall be warranted to a period equal to the unexpired portion of the original product warranty.

This warranty shall not apply to:

A. Any defects caused or repairs required as a result of abusive operation, negligence, accident, improper installation or inappropriate use as outlined in the owner’s manual.
B. Any Magnasonic product tampered with, modified, adjusted or repaired by any party other than Magnasonic.
C. Any cosmetic damage to the surface or exterior that has been defaced or caused by normal wear and tear.
D. Any damage caused by external or environmental conditions, including but not limited to transmission line/power line voltage or liquid spillage.
E. Any product received without appropriate model, serial number, and CSA/cUL/ cULus/cETL/cETLus markings.
F. Any products used for rental or commercial purposes.
G. Any installation, setup and/or programming charges.

If in any situation your purchase displays a manufacturer’s defect during the warranty period and does not function correctly, Magnasonic will repair your product and cover all parts, labour, and return costs upon delivery of the Magnasonic product together with proof of purchase.

Products returned to Magnasonic for warranty service must be shipped prepaid (paid by customer). Products must be shipped in the original shipping container or its equivalent; in any case the risk of loss or damage in transit is to be borne by you.

We believe everyday experiences should be extraordinary. We pledge to work with you in resolving any issue that occurs with your product. If you are in need of assistance do not hesitate to visit our support page at www.magnasonic.com/support/

Thank you for your purchase of this Magnasonic product. Please read this user manual carefully before using product to ensure proper use. Keep this manual in a safe place for
future reference.

What’s Included

Super 8/8mm Film Scanner      7” Reel                              Reel Adapter (x2)

     Power Adapter                     User Manual                Lifetime Customer Support

         USB Cable              TV Out Cable (RCA)          1 Year Warranty

Product Information

1. Left Reel Shaft
2. LCD Display
3. Film Insert Door
4. Film Type Switch
5.  Right Reel Shaft

Back

Buttons

Powering on Your Super 8/8mm Scanner

1. Insert an SD card (not included) into the SD card slot at the back of the lm scanner. An SD card (CLASS 4 or above) is required in order to scan and save video.
   IMPORTANT: Inserting an SD Card after powering on the scanner will cause the scanner to shut o
   IMPORTANT: Inserting an SD Card after powering on the scanner will cause the scanner to
   shut off
   
2. Connect the power adapter into the DC 12V port at the back of the outlet.
   

Preparing Your Film

This scanner can support 8mm or Super 8 film on 3′: 5″ or 7″ reels.

1. Install your film reel onto the left reel shaft. Ensure the perforated holes on your film are on the inside, closest to the scanner.
   Note: If using with Super 8 film you will need to install the red reel adapter.
   
2. Install the included ?”film reel onto the right reel shaft of the scanner. If using a different reel use the grey reel adapter as needed.
   
3. Feed your film along the dotted film route line on the film scanner to properly load the film onto the scanner.
   
4. Place the film around the empty film reel on the right, placing the end of the film into the slot on the reel. Gently rotate the reel 2-3 times to secure
   the film in place. Hold the film in place for the first rotation.
   
5. Slide the Open tab to the left to release the film tray door latch.
   
6. Insert the film ensuring that the film’s perforated holes are at the back and placed under the two white tabs located on the film tray.
   
7. Once the film is secured under the tabs close the film tray door to lock the film in place during scanning.

Selecting Film Type

Change the film type to either 8mm or Super 8 by pushing the film type lever on the film scanner left or right.
Note: Switching film types will prompt the reel motor to adjust. This is normal.

Adjusting Your Scan Settings

Exposure (Brightness)

IMPORTANT: Exposure can only be adjusted before recording video.

1. You can adjust the exposure by going to Exposure on the main menu.
2. Use the and buttons to change the brightness value between 2.0 (brighter) and – 2.0 (darker). Note: The default setting is 0.0.
3. Once you have chosen the value, press the OK button.

Sharpness

IMPORTANT: Sharpness can only be adjusted before recording your video.

1. You can adjust the sharpness by going to Sharpness on the main menu.
2. Use the and buttons to change the sharpness to either Low, Medium, or High.
   Note: The default setting is medium.
3. Once you have chosen your sharpness, press the OK button.

Frame Adjustment

IMPORTANT: The frame can only be adjusted before recording your video. You can adjust the frame position by going to Frame ADJ on the main menu.
Use the and buttons to adjust the selected setting. Use the OK button to cycle through the different adjustments. Press the button to return to the Scanning Mode
screen.
X – Horizontal
Y – Vertical
W – Zoom

Resetting to Default

If you would like to change all settings (Exposure, Sharpness, and Frame Adjustments) back to default, go to Default Setting in the main menu and press the OK button

Scanning Your Film

Ensure you are in Scanning Mode. If you are in the main menu, press the MENU
button to exit. You should see the scanning mode screen below. Note: This film scanner will only capture video and not audio.

IMPORTANT: Make sure that you are done changing your Exposure, Sharpness, and Frame Adjustment settings before moving onto the next step.

1. Press the OK button to proceed to selecting the size of your reel. Use the to move between reel size options. See Appendix A for a film reel size selection diagra

2. Press the OK button to confirm your selection. Scanning will then begin automatically. While scanning, a red dot will appear at the upper left corner indicating that the recording is in progress. Your video will automatically be saved to the inserted SD card.
3 .You can stop scanning at any time by pressing the OK button.
Note: Stopping the recording means the video file recording will end. The next time you start the
recording again, it will be a new video file.

Viewing Your Scanned Videos

1. Press the and button to enter the main menu.
2. Press the button to select Playback and press the OK button to enter playback mode.
3. Press the OK button to play or pause the selected video.
4. Press the and buttons to move between videos.
5. Press the MENU button again to stop playback on any video and enter the Playback sub-menu. Here you can Return to the playback menu, Delete a video, or Protect a video.

Protecting Your Video File

1. Protecting your video file prevents it from being deleted. If you try to delete a protected file a “Protected!”warning will flash on the screen. You can lock either the
   current video file or all video files by choosing either Lock Current or Lock All.
2. To delete a protected file, go into the playback sub-menu, select Protect, and choose Unlock Current or Unlock All. You should now be able to delete the video.

Watching Video on Your TV

You can use a TV or a monitor to view your saved videos on a larger screen.

1. Power on the film scanner and your TV.
2. Plug one end of the included TV out cable into the TV OUT port on the back of the
3. Plug the other end of the TV out cable to the yellow RCA input on your TV. If your TV does not have a yellow/RCA input you may need to use the Component Input instead.
   Note: If the image on the TV is in black and white a TV setting may need to be changed. Check your TV settings to enable Video Input or Composite Input. If your TV does not have this setting or does not have an RCA input, contact the TV manufacturer for instructions on using the yellow RCA cable.

Rewinding Your Film

Once scanning is complete you will need to rewind your film reel.

1. Remove the included 7″reel with your film on it. Install the reel on the left reel shaft.
2. Install the empty original film reel on the right reel shaft, using the grey reel adapter if necessary
3. Feed the film using the below diagram and install on the empty film reel. Remember to rotate the reel 2-3 times to secure it in place.
   
4. Press the MENU button to open the main menu.
5. Use the button to select Fast Forward and press the OK button to select it.
6. Use the button to select Yes and press the OK button to begin fast forwarding.
7. Once fast forwarding is complete press the OK button to stop.

Downloading Video to Your PC

Note: The scanner will not scan directly to your PC.

1. Plug the included USB cable into the USB port at the back of the film scanner.
2. Plug the other end of the USB cable into the USB port on your PC.
3. Ensure there is an SD card in the SD card slot on the scanner.
4. Press the button on the scanner to turn it on.
5. Press the MENU button on the scanner to enter the main menu.
6. Use the button to move to USB in the menu.
7. Press OK to start the scanner-to-PC connection. The SD card is read like it is an external hard drive and will show up as a USB drive.
8. Open the FilmScanner folder and then the Movie folder. You should now be able to  see your saved video files (MP4) that are on your SD card. Simply copy them onto your computer.
   IMPORTANT: Always safely eject the USB drive before disconnecting the USB cable.

Formatting SD Card

IMPORTA1’1T: Formatting your SD card will cause all information to be erased, including protected files.

1. Press the MENU button to go to the main menu use the button to go to Format.
2. Press the OK button to select Format. “All data will be deleted” warning will appear. Press the button to select “OK” and press the “OK” button to format.
3. Your SD card is now formatted.

Changing the Language

1. Press the MENU button.
2. Use the button to move through the menu and highlight Language.
3. Press the OK button to select Language.
4. Choose your language by pressing and then pressing OK .

Cleaning and Care

1. Please make sure the scanner is clean before using.
2. Do not use liquid cleaners.
3. Do not use organic solvents such as alcohol, gasoline, or thinner, to clean the equipment.
4. Clean inside of the product only with a dry cloth.

Scanning Error

1. Ensure the lm size switch on the front of the scanner is set to the correct size.
2. Open the Film Tray Door and check the lm. Ensure it is properly threaded and installed under the white tabs.
   If you receive the error message, “Cluster size wrong. Please format” when scanning follow the below steps. SD Card Error
3. Ensure the SD Card is CLASS 4 or higher and is 32 GB or less.
4. Follow the instructions in the Formatting SD Card section to format the SD Card.
5. Inspect the sprocket holes on the lm for signs of wear. Worn sprocket holes may prevent the scanner from grabbing the holes and advancing the lm.
6. Press the MENU button to clear the error message and attempt scanning again.

FAQ / Troubleshooting

Film not feeding? See an error message? Check out our Support Center for a full troubleshooting guide.

Appendix A

Film Reel Size Selection

Specifications

Important Safety Instructions

1. Do not attempt to dissemble or modify any part of the scanner.
2. If any of the following conditions are present, stop using immediately, unplug the power
   cord, and refer to a qualified service professional for servicing:
   A. If there is any smoke or unusual smell while using.
   B. If the product has been exposed to rain, water, or other liquids.
   C. If the product does not operate normally by following the operating instructions.
   D. If the product exhibits a distinct change in performance.
   E. If the product has been dropped or damaged in any way.

Best Practices for Safe Use

1. Only use films of standard size.
2. Only use attachments/accessories specified by the manufacturer.
3.  Unwind and straighten the USB cord before use.
4.  Check that the power voltage stated on the rating label corresponds to your local electricity supply.
5. Unplug the power adapter from the wall when the product is unused for a long period of time and during thunderstorms.
6. Do not use this product near water.
7. Do not immerse this product, the power cord, or any accessories in water or any other liquid.
8. Do not block any ventilation openings.
9. Do not place this product near any heat sources such as radiators, heat registers, stoves,
10. Do not attempt to service or disassemble this product yourself as opening or removing covers may expose you to dangerous voltages or other hazards.

FCC Information

This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable
protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.

NOTE: This unit may contain a microcomputer for signal processing and control function. In very rare situations,
severe interference, noise from an external source, or static electricity may cause it to lockup. In the unlikely event that
this should happen, turn off the unit, wait at five seconds, and then turn it bock on again.

Magnasonic® Warranty

Thank you for choosing Magnasonic. We guarantee your investment in our products is a solid one! Extensive thought, research, planning, and design goes into every product we make.
High quality components combined with precision manufacturing allows us to maintain the highest possible production standards. All items are guaranteed against defects in materials and craftsmanship.
Magnasonic products come with a complete one year parts and labour warranty. Proof of purchase from an authorized Magnasonic dealer is required when seeking warranty assistance.
Magnasonic has outstanding quality control, if something should go wrong with any of our products, we will repair it free of charge! If the product cannot be repaired, we will replace the product. If the product has been discontinued, we will replace the product with either the newest version of said product or current equivalent. Replacement parts furnished in connection with this warranty shall be warranted to a period equal to the unexpired portion of the original product warranty.
This warranty shall not apply to: A. Any defects caused or repairs required as a result of abusive operation, negligence, accident, improper installation or inappropriate use as outlined in the owner’s manual.
B. Any Magnasonic product tampered with, modied, adjusted or repaired by any party other than Magnasonic.
C. Any cosmetic damage to the surface or exterior that has been defaced or caused by normal wear and tear.
D. Any damage caused by external or environmental conditions, including but not limited to transmission line/power line voltage or liquid spillage.
E. Any product received without appropriate model, serial number, and CSA/cUL/cULus/ cETL/cETLus markings.
F. Any products used for rental or commercial purposes.
G. Any installation, setup and/or programming charges.
H. Defect or damage as a result of connecting a product to an outlet with the incorrect voltage. Voltage converters must be used where applicable.

If in any situation your purchase displays a manufacturer’s defect during the warranty period and does not function correctly, Magnasonic will repair your product and cover all parts, labour, and return costs upon delivery of the Magnasonic product together with proof of purchase.
Products returned to Magnasonic for warranty service must be shipped prepaid (paid by customer). Products must be shipped in the original shipping container or its equivalent; in any case the risk of loss or damage in transit is to be borne by you. We believe everyday experiences should be extraordinary. We pledge to work with you in resolving any issue that occurs with your product. If you are in need of assistance do not
hesitate to visit our support page at: www.magnasonic.com/support/

Ultrasonic Jewelry Cleaner
CD2800 Quick Start Guide v1.3

Items that can be cleaned

• Jewelry – necklaces, bracelets, rings, earrings, body jewelry
• Glasses & Watches – eyeglasses, sunglasses, waterproof watches, watchbands
• Hygiene Items – electric shaver heads, toothbrushes, dentures, razor blades
• Stationary – pen-heads, seals, rubber stamps
• Silver items that have dirt accumulation
• Other Items – tools, watch parts, coins, keychains, valves, machine nozzles, badges, instruments, filters, & kitchen utensils

Items that cannot be cleaned

• Glasses/sunglasses with pre-existing scratches or cracks in the coating
• Jewelry containing loose stones or soft/porous stones such as pearls, emeralds, amber, and opal
  NOTE: Please consult your local jeweler if you are unsure about whether or not you should use the ultrasonic cleaner on your specific type of jewelry.

1.  Refer to the chart on the left for what can/ cannot be cleaned. Place the item inside the CD2800.
   Note: Tarnished metal will require additional cleaning steps. (See below)
2. Fill the tank with water. Liquid should cover the object you wish to clean.
   Note: Running without a minimum of 1 cup(250ml) water can cause damage to the unit.
3. Press ON to begin cleaning. You will hear a buzzing sound.
   
4.  The cleaner will stop automatically after 180 seconds. Press OFF to stop the cleaner at any time.
   
5. After cleaning is done, unplug the unit from power and remove any items. When emptying the tank, make sure to pour out of the side so that water doesn’t come in contact with the front control panel.
   

Questions?
Give us a chance to help, we’re just a click away.

Magnasonic.com/support

Cleaning Silver
When silver items are exposed to air they will oxidize/tarnish.  To remove the discoloration and restore shine you can use these steps.

What you need:

1. Ultrasonic Cleaner
2. Dish Soap
3. Warm Water
4. A Microfiber Cloth

TIP: If you are unable to remove the tarnish with soapy water you can also use toothpaste and water on the cloth instead.

1. Use the Ultrasonic Cleaner to remove dirt and grime
2.  Mix a small amount of dish soap with the warm water in a separate bowl
3. Dip the microfiber cloth into the soapy water
4. Rub the silver with the wet cloth to remove the tarnish
5. Rinse the silver item in cold water
6.  Dry the item with a soft cloth
7. After removing the tarnish the last step is to buff the silver with another dry soft cloth to restore its shine

For a full manual, videos, and other helpful resources please visit us at: www.magnasonic.com/resources