BASE1
User Guide

1. Volume Up / Next Track
2. Volume Down / Previous Track
3. Answer / End / Reject call
4. On / Off, Play / Pause
5. Bluetooth LED
6. AUX Input, 3.5 mm
7. Microphone
8. MicroUSB socket

Power

To turn on the headphones, press and hold. A blue and red LED will briefly light up, indicating that the headphones are turned on.

Switch off

To turn off the headphones, press and hold. A red LED will briefly light up, indicating that the headphones are turned off.

Pairing

1. Pairing with a new device
   a) On your device, activate Bluetooth and put it in Bluetooth search mode.
   b) Select „LAMAX Base1“ from the list of devices found. If a pairing code is required, enter „0000“ and confirm.
   c) Successful pairing of the headphones with the device is indicated by an audible tone and a blue LED lighting up.
   d) Playback can be operated either by a paired device or by using the controls on the headphones.
2. Repeated pairing
   To pair with a device that has already been used, turn on the headphones by holding down the button. The headphones will automatically connect to the device. A successful connection is indicated by a tone and a blue LED lighting up.
3. Pairing with a second device
   To pair with a different device:
   a) Using your mobile, first disconnect the currently paired device. The headphones will automatically switch to pairing mode.
   b) Then, continue as described in point 1 of the manual: „Pairing with a New Device“.

Playback / Controls

1. Press to start your music. Pressing the button again will pause the track you are playing.
2. Volume up (press), next track (hold)
3. Decrease volume (press), previous track (hold)

Note: When the headphones are charging, playback is deactivated.

Hands-free

1. To answer an incoming call, briefly press
2. To end the call, briefly press the same button again.
3. To reject a call, press and hold for approximately 2 seconds.
4. To increase or decrease the volume during a call, press these keys:
   – Press the key to increase the volume.
   – Press the key to decrease the volume.

Using the headphones in „Line-in“ mode

You may use the headphones with a cable in order to conserve battery life. Connect one end of a 3.5 mm audio cable into the socket at the base of the earpiece of your headphones and connect the other end to your audio device. Wireless operations do not function if an audio cable is being used.

MicroSD

Thanks to the microSD card slot, you can play music directly from the card. The headphones must be on and charged to allow playback to start.

1. Insert the microSD card into the slot located on the right earcup.
2. An audio signal sounds as it switches to playback mode and then it begins playback.
3. The playlist is played back sequentially from the card.

Charging

The headphones can be charged using the supplied USB cable by connecting to a suitable USB device – an adapter, PC, or power bank. Do not charge the headphones with a higher input voltage than 5V as they may be damaged. Keep the device under supervision while charging. The red LED indicates that the headphones are connected to a power
source and switch off when fully charged.

Technical Specifications

Driver unit Specifications

The current version of the user manual is available for download here: LAMAX_Base1_manual [PDF]

Controls:

LED Indicators:

– Ready for pairing – LED 1 blink blue
– Pairing – LED 1 blink blue every 5 seconds
– Playing through audio cable – LED 1 blink blue
– Discharged battery – LED 1 blink red
– LED 2 – 1 to 4 green dots indicate 25 % to 100 % battery capacity

Switching On/Off:

Use the POWER button to switch the speaker on. The on/off indicator will light and an audible signal will be heard. The speaker can be switched off by holding down the same button. An unpaired speaker will switch itself off after 10 minutes of inactivity.

Pairing

1. Switch the speaker on by holding down POWER. The LED will begin blinking blue and the speaker is ready to be paired.
2. On a mobile phone or other device switch on Bluetooth. Search for “LAMAX Flow1” on the list of available devices. On successful pairing, the speaker will emit a sound and the LED will begin to blink blue every 5 seconds.
3. To reattempt pairing press BT. The LED will begin blinking blue and repeat step 2.

Audio Connection:

By plugging in the AUX socket with the supplied audio cable, you can play music from any device. When playing through the audio input, it is not possible to control the tracks directly from the speaker.
Pressing the  POWER button during playback via the audio cable puts the speaker back into Bluetooth pairing mode.

Handsfree:
When pairing your phone with Bluetooth, the handsfree function is activated.
To answer/end the call, press the PLAY button, reject the incoming call by holding down PLAY, and double-tap PLAY to redial the last number.

Charging:
The speaker can be charged by plugging the supplied USB cable into a suitable USB port.
Do not charge the speaker with a higher input voltage than 5V, as this may damage the equipment.

Reset:
If the speaker stops responding, insert a paper clip (or another similar object) into the RESET socket and gently press the button inside. The speaker will turn off. In the case of pairing difficulties, press the RESET button in the same manner and hold for a few seconds. The speaker will turn off and restore the factory default settings.

TWS Function:
Turn on the two speakers you want to pair. Press the BT button on the same speaker as the master. The MASTER speaker is connected as the left stereo channel, the SLAVE speaker as the right stereo channel.
When pairing the speakers for the first time, ensure your media device is disconnected.

Main Features:

– Overall output 30 W
– Two main speakers complemented by a passive radiator, producing deep bass
– Elegant design combining wood and metal
– Bluetooth 4.2 with a range of up to 10 meters
– Possibility to play via audio cable
– 6600 mAh capacity battery, lasts up to 20 hours playback on a single charge
– Built-in microphone enabling easy calling
– Battery saver function
– TWS (True Wireless Stereo) function enabling two speakers to be paired together. One speaker will act as the right channel and one as the left.

Parameters

Updated user guides can be downloaded here: LAMAX_Flow1 [PDF]

BFit
Quick start guide

Charging and replacing the wristband

Remove the body of the BFit from the strap according to the instructions in the picture below. Charge the fitness band before using it for the first time. Plug it into any USB charger or USB port on your computer. Whilst charging, the white LED flashes and stops when fully charged. Charging takes about half an hour.

Controls

The fitness band can be controlled by moving the wrist or via touch.
Rotating the band activates the horizontal screen which then displays the current time. This function can be enabled or disabled in the mobile app.

Touch the BFit display to do the following operations:

Action	operating the fitness band
Turn on the fitness band	Touch and hold the display.
Light up the display	Touch the display or rotate your wrist to a horizontal position.
Turn off the fitness band	Swipe on the screen from left to right using your finger until you see the icon. Then touch the power switch icon. To turn off, touch, and hold the display.
Enter the menu	Swipe across the screen from left to right using your finger.
Browse the menu items	Touch the display on the home screen or in the menu.
Confirm selection	Touch and hold the display.

Fitness band functions

	Time
	Date
	Bluetooth connection
	Finding connection
	Sleep monitor
	Phone locate
	Turn off wristband
	Day of the week
	Pedometer
	Calories burnt
	Camera remote control
	Inactivity alert
	Alarm clock
	Display caller
	Display incoming messages

Installing the mobile app and pairing the fitness band
The fitness band is compatible with iOS (7.0 and higher) and Android (4.4 and higher). Download the mobile app from the following link:

http://tech.lamax-electronics.com/BFit/BFit-app-app-store

`-
http://tech.lamax-electronics.com/BFit/BFit-app-google-play

Enable Bluetooth on your smartphone. Turn on your BFit band. When the band is not paired, it is in search mode and this icon appears next to the time display, above the battery status. Once paired, this icon is then displayed next to the time and above the battery status.
To properly display the time, you need to synchronize the time in the application first.

Sleep monitor
Swipe the screen from left to right using your finger until you can see the icon. Then touch and hold the display. The band then briefly vibrates and displays the exact time together with the icon.
Sleep monitoring is now activated. Turn off sleep monitoring by pressing and holding the display in this mode. The display will light up, vibrate briefly and the connection icon reappears next to the time. Automatic sleep monitoring can also be enabled in the app.

Alarm clock
In the app go to alarm settings. Set the day and time of the alarm.
At the set time the fitness band will display this icon and vibrate.

Inactivity alert
In the app set the time range and days of the week that you want the BFit to encourage your activity. If you are inactive for a long time within this period the band vibrates and this icon is displayed.

Phone locate
Navigate the menu of the fitness band, which is paired with the phone, to the icon. Touch and hold the display until the band vibrates.
The phone will now begin to ring or just vibrate if the mobile is set to vibrate.

Smartphone camera remote control
In the app navigate to the camera controls. The icon is then displayed on the paired fitness band. To take a photo, press and hold the BFit display.

Display incoming call and message notifications
In the app navigate to the incoming call and message notification settings. Select which notifications to display on the fitness band. If a notification does not appear on the BFit screen, despite being paired with the phone and with the notification function enabled in the app, disconnect and reconnect the band to the smartphone via Bluetooth and turn the notifications off and on again in the app.

Water and dust resistant
The fitness band is resistant to the ingress of water and foreign objects according to the IP67 rating. This means that it is resistant to water for 30 minutes up to a depth of 1 m and resistant to foreign matter including dust.

Technical specifications 

* Modified Android versions from some manufacturers may cause problems with connecting Bluetooth devices. For the current exceptions, check
www.lamax-lectronics.com/BFit/compatibility.

To use this product correctly and for detailed instructions on installing and operating the mobile app and pairing the band with your smartphone, read the most recent version of the manual which is available to download at the following link:

BFit_manual [PDF]