KOLINK – UseManuals https://usemanuals.com Owner's manuals for all sorts of products Tue, 27 Jun 2023 04:52:01 +0000 en-US hourly 1 https://wordpress.org/?v=6.7.2 https://usemanuals.com/wp-content/uploads/2025/02/favicon-32x32-2.png KOLINK – UseManuals https://usemanuals.com 32 32 KOLINK Big Chungus Shredded Midi Tower ARGB Showcase Manual https://usemanuals.com/kolink/big-chungus-showcase/ Tue, 27 Jun 2023 04:52:01 +0000 https://usemanuals.com/?p=126157 Read More...

]]>  

KLINK Big Chungus Shredded Midi-Tower ARGB Showcase
User Manual

ACCESSORY PACK CONTENTS

PANEL REMOVAL

  • Left Panel – Remove from packaging and attach to the side panel in the correct orientation using the supplied thumbscrews.
  • Right Panel – Remove from packaging and attach to the side panel in the correct orientation using the supplied thumbscrews.
  • Front Panel – Unscrew from both sides if needed and lift away (note, side panels must be removed first).
  • Top Panel – Unscrew from both sides if needed and lift away (note, side panels must be removed first).

MOTHERBOARD INSTALLATION

  • Align your motherboard with the chassis to locate where the stand-offs should be installed. Once done, remove the motherboard and fasten stand-offs accordingly.
  • Insert your motherboard I/O plate into the cutout at the rear of the case.
  • Place your motherboard into the chassis, making sure the rear ports fit into the I/O plate.
  • Use the provided motherboard screws to attach your motherboard to the chassis.

 POWER SUPPLY INSTALLATION

  •  Remove the PSU bracket from the case by removing the screws
  • Align the holes of your PSU to the bracket and secure it with screws.
  • Re-attach the bracket to the case and secure it with screws.

GRAPHICS CARD/PCI-E CARD INSTALLATION

  • Remove the rear PCI-E slot covers as necessary (depending on the slot size of your card)
  • Carefully position and slide your PCI-E card into place, then secure with the add-on card screws supplied.

3.5″/2.5″ HDD INSTALLATION

  • Unscrew and remove the HDD bracket from the case.
  • Attach your HDD’s/SSD to the bracket using the supplied screws.
  • Insert the bracket back into the case and reattach using the screws from before.

TOP FAN INSTALLATION

  • Align your fan(s) to the screw holes on the top of the chassis and secure it with screws.

FRONT/REAR FAN INSTALLATION

  • Align your fan to the screw holes on the chassis and secure it with screws.

WATERCOOLING RADIATOR INSTALLATION

  • Secure the fans to the radiator, then fasten the radiator inside the chassis by securing it with screws from the outside.

I/O PANEL INSTALLATION

  • Carefully check the labeling of each connector from the I/O panel to identify their function.
  • Cross-reference with the motherboard manual to locate where each wire should be installed, then secure one at a time. Please ensure they are installed in the correct polarity to avoid non-function or damage.

]]>