kinetik Heart Rate Monitor

Support

Our manual should provide you with all the information you need to set up and use this product.
If you have a question, have a look at our Troubleshooting page!
For further assistance, why not contact our Customer Care team directly? We’re here to help!
Our Customer Care team are available from 9am-5pm, Monday to Friday (excluding bank holidays). We promise to respond to all queries and will ensure to resolve any issue you may be having.
You can reach us by…
Phone: +44 1483 937969
Live Chat:
Simply visit www.kinetikwellbeing.com and send us a message.
Email: customercare@kinetikwellbeing.com
Post: Kinetik Medical Devices Limited
Unit 3, Perrywood Business Park, Honeycrock Lane,
Salfords, Redhill. RH1 5DZ

Introduction

Thank you for buying the Kinetik Wellbeing Heart Rate Monitor.
At Kinetik Wellbeing our mission is for every home to own affordable healthcare products that help people to manage their wellbeing. Taking regular exercise and increasing your heart rate above its resting level can help to lower blood pressure, improve your circulation and strengthen your heart and lower your risk of heart disease.

The Kinetik Wellbeing Heart Rate Monitor is designed to keep a check on your heart rate during physical activities.
If you are concerned or in any doubt about your fitness levels or heart rate, always consult your doctor. If you are embarking on a change of lifestyle, diet or exercise regime you should always consult with a healthcare professional before doing so.
Before using the Kinetik Watch and Heart Rate Monitor, please read the instructions included in this user manual.

Features

• Large LCD Display
• Alarm
• Clock (12/24 hour)
• Stopwatch
• Workout Memory
• Exercise Timer
• In-Zone Timer
• % of Max. Heart Rate
• Maximum Heart Rate
• 3 Selectable Heart Rate Zones
• Average Heart Rate
• Audio and Visual Alarm in Target Zone
• Upper & Lower Heart Rate Zone Alarm
• Calories Burnt Counter
• EL Backlight

Parts

Keys and Functions

MODE

• Scrolls through various modes of the watch
• Advances to next variable in setting sequence

ADJUST/LIGHT

• Activates Light
• Enters the setting sequence for each setting mode
• Clears session data

START/STOP

• Increases variable in setting sequence
• Pauses time in HRM mode

RESET

• Decreases variable in setting sequence
• Toggles through sub modes
• Toggles between pounds/kilograms
• Ends session

Wearing the Chest Belt

Follow steps 1. through 4. to wear the chest belt and go for a run.

1. Open the chest belt.
2. Insert the tab into the hole, make sure tab and hole are on the same level.
3. Position on rib cage under the chest. Make sure the chest belt is positioned in the right direction and worn directly against the skin.
4. Lift the belt slightly from the skin and wet both grooved areas on the back to ensure strong connection between your pulse and the chest belt.

Zone Selection

• LEVEL 1
  55 – 70%
  Sustain a healthy heart and lose weight.
• LEVEL 2
  70 – 80%
  Develop endurance and increase stamina.
• LEVEL 3
  80 – 100%
  Sustain excellent fitness condition and increase muscle strength.

Set Time

In TIME mode you can set the Time, Date, and Hour Format.
Follow steps 1. through 5. to set the time and date.

Heart Rate Monitor

PRINCIPLE OF THE HEART RATE ZONE
It is important that you know your maximum heart rate, training zone, upper heart rate limit and lower heart rate limit before you begin. They help you achieve the maximum health benefits out of your workout. We recommend consulting a medical practitioner or registered physician before setting your personal training-schedule and target. Or you can set your own upper and lower limit
using the following as a reference guide: Calculation of Maximum Heart Rate: Male = 220 – Age, Female = 226 – Age
Getting Started
Follow steps 1. through 3. to get ready and start your run.

Data Display/Zone Range

The exercise time is displayed under the heart rate by default. Press the START/STOP key to view other information.

User Settings

Your heart rate is measured in beats per minute (bpm) and setting a heart rate zone allows you to work with an upper and lower heart rate limit. Follow steps 1. through 6. to adjust the User Settings.

Heart Rate Intensity Chart

This is an alternative to check your heart rate zones based on gender, age and weight. Starting with your Max Heart Rate (MHR), use the chart to calculate your zones depending on the intensity of your workout. Please note that this chart may not be suitable for everyone.

Max Heart Rate
Male=220-Age
Female=226-Age

Level 1(55-70%)
Sustain a healthy heart and lose weight

Level 2(70-80%)
Develop endurance and increase stamina

Level 3(80-100%)
Sustain excellent fitness condition and increase muscle strength

Data Overall Information of Performance

In DATA mode you can view your stored data from the last session.
Follow steps 1. through 2. to manage your data. *Please note only one session worth of data can be stored.

Alarm

In ALARM mode you can toggle ON/OFF for the alarm and adjust the time.
Follow steps 1. through 5. to adjust alarm settings.

Stopwatch

In stopwatch mode, you can measure the amount of time elapsed from a particular time that the watch is activated to the time that the watch is deactivated. Follow steps 1. through 3. to use the stopwatch.

If you want a split time, start the timer and then press the reset button. The watch will continue to measure the amount of time that has passed. To see the time elapsed, press the start button until the timer is live again.

Troubleshooting

Heart rate doesn’t display on watch

• The chest belt may not be positioned correctly.
• The grooved sensors may not be wet enough, wet and try again.
• It is recommended that the grooved sensors are directly on your skin.

Heart rate reading on watch is inconsistent or stops

• The battery may need to be replaced in the chest belt.
• Sources of electromagnetic fields can cause interference. (Appliances, computers, and power lines)

Watch beeps continuously

• If the zone alarm is on and your heart rate is not in any of the zone ranges, the watch will beep to indicate you are out of the zones.

Watch display may be frozen due to static electricity

• The display may be frozen due to static electricity or recent battery replacements, If this occurs, press on all 4 side buttons at the same time to reset to factory settings.

Return Policy

Product may be returned if faulty, please contact the Retailer or Kinetik directly if you’re experiencing issues with your product. This does not affect your statutory rights. Please note the retailer’s own return policy may still be valid, contact the retailer for more information.

Care & Maintenance

Avoid extreme force, shock, dust temperature, or humidity. Such conditions may cause malfunctioning, a shorter electronic lift span, damaged batteries, or distorted parts.
Rinse the watch with fresh water to avoid materials building up that can interfere with the reception of the pulse.
Do not use abrasive or corrosive materials to clean the watch or chest belt. Abrasive cleaning agents may scratch the plastic parts and corrode the electronic circuit.
Avoid tampering the internal components of the watch. Doing so will terminate the sensors warranty and may cause damage.

Audible Alert How to turn on/off

When will the Heart Rate Monitor make an audible alert?

1. As a button sound
2. Alarm
3. HR mode – It will beep when your max and minimum heart rate is over the target set.

How to turn off the beep.
To turn off the beep on the Heart Rate Monitor follow steps 1. through 3.

Watch Reset

To reset the watch, press all 4 buttons at the same time. The watch will show the below screen.

Note: When resetting the watch, you will lose all data and personal settings (time, date, heart rate modes, alarm) will revert to factory mode

Battery Requirement

WE STRONGLY RECOMMEND TAKING YOUR WATCH TO A LOCAL RETAILER OR JEWELLER TO HAVE THE BATTERY REPLACED TO AVOID THE POSSIBILITY OF PERMANENTLY DAMAGING THE WATCH.

Specifications

WATCH
Water Resistance: 1 ATM                  Suitable for everyday use.
Splash/rain resistant. NOT suitable for showering, bathing, swimming, snorkelling, water related work and fishing. Water damage will occur if watch buttons are pressed under water. Please dry after use.

Operating Temperatures: -5 to 50 degree Celsius.

Material Specifications:
Crystal: Acrylic                          Case: Acrylonitrile butadiene styrene (ABS)
Keys:   Acrylonitrile butadiene styrene (ABS) Polyurethane
Buckle: Stainless Steel                 Bezel: Stainless Steel
Caseback: Stainless Steel             Strap: Polyurethane
Mode Limits: Heart Rate 30-240bpm

Explanation of Symbols on Unit

• Read the instructions (actual symbol colours are white on a blue background).
• Symbol for “Manufacture Date”.
• Symbol for “Environment Protection” – Waste electrical products should not be disposed of with household waste. Please recycle where facilities exist. Check with your local Authority or retailer for recycling advice.
• Symbol for “Manufacturer”.
• Symbol for “European Representative”.
• Symbol for “Complies with EU requirements
• Model Reference.

Harvard Medical Devices Ltd.
Unit 1002, 10th Floor, Railway Plaza,
39 Chatham Road South, Tsimshatsui,
Kowloon, Hong Kong.

Quick Start Guide

• Unpack thermometer and insert batteries
  
• Condition the thermometer at room temperature for 30 minutes before using  devices for the first time
  
• Turn on device, remove cap and thermometer will switch to ear mode automatically and will be shown on screen.
  

Ear mode

• Insert thermometer correctly into ear depending on age, and press for measurement.
  
• Keep cap on probe and turn on with symbol.
  

Forehead mode

• Point the thermometer to forehead 0-5mm away from skin surface and press 
  
• Keep the cap on and press and hold for 6 seconds for object mode then press for measurement
  

Object mode

• Point thermometer to object 1-5mm away and press for measurement
• 

for more information visit :
kinetikwellbeing.com