KICKASS KAODCPPROV4 12V Portable Cinema Projector

Important Safeguards

1. Please read the manual carefully before operating the projector. To ensure a stable power supply, please use the 240V AC adapter for mains AC power OR the 12V DC cable for powering the projector from a portable power source such as an AGM battery.
2. Please use the power supply and cable indicated on the rating label. The projector should be kept away from clothes, sofas, and anything that may block the ventilation scoop. Please keep the unit away from ammable and explosive materials.
3. Please do not disassemble the unit yourself as this will invalidate the warranty service. To protect your eyes, do not stare directly at the lens when the projector is on. The projector must be kept away from water and any other liquids.
4. To prevent electric shock, please keep the projector out of the rain and away from moisture. It is recommended to switch off the projector after it has run for 6 hours non-stop Please use the original foam and other cushioning materials when transporting the projector.
5. If the projector does not work, please contact the KickAss support team, contact details are at the end of this manual.

What’s Included

1 x KickAss Projector Main Unit 1 x Remote Control
1 x 240V AC Power Cable
1 x 12V DC Power Cable 4M 1 x AV Signal Cable
1 x User Manual

Specification

Multimedia Supported Files

The projector does not support Dolby audio decoding.

The terms HDMI and HDMI High-Definition Multimedia Interface, and the HDMI Logo are trademarks or registered trademarks of HDMI Licensing Administrator, Inc. in the United States and other countries.

Some projectors have different functions, depending on the object.

Ports

1. Headphone port for audio output
2. AV port for normal signal input
3. USB port for multimedia play
4. USB port for multimedia play
5. HDMI port for HDMI signal input

Panel Functions

1. Return
2. Arrow keys
3. OK key
4. Power Button
5. Power Indicator£º Standby: red Power on blue

Function Operation

1. Power
2. Aspect ratio
3. Arrow keys
4. Home
5. Menu
6. Volume Down
7. Setting
8. Screen flip
9. Source
10. Enter
11. Return
12. Volume Up
13. Mute

Power On/Off

Connect the power cord to the projector and connect the power cord to the outlet before the power is turned on.
Once the projector is plugged in, it will be in Standby mode.
Power on: Press the power button on the remote control once, and the power indicator will turn blue and steady, you can turn on the projector.
Power off: Press the power button on the remote control twice, the power indicator changes from blue to steady red, and turn off the projector.
The projector can be powered by 240V AC using the AC adapter or by 12V DC using the cigarette plug lead.

WARNING: Do not attempt to power the unit from 240V AC using the cigarette plug lead.

Focus/Keystone

1. Focus
2. Keystone

Some projectors focus by rotating the lens, and the trapezoidal correction is located on the back of the machine.

1. Focusing
   Place the projector lens perpendicularly to the projection screen or curtain wall, and adjust the focus dial until the image is clear, that means the image focusing is finished
2. Keystone Correction

Please adjust the “Keystone Correction” dial ring until the image is displayed normally.
Note: The projector has only vertical keystone correction and no horizontal correction.
Make sure your projector is level with the projected image.

Standard Setting

Please refer to the following table to adjust your picture size and distance. (From the lens to the screen).

Note: The above data is for reference only, please refer to the physical measurement.

Multimedia Play

Step 1: Insert the USB flash drive into the projector’s USB interface.

Step 2: Select “Media” and press “OK” to enter.
Step 3: Select the one you want to play.

Signal Source Settings

Step 1: Press “OK” button to ensure “source”.
Step 2: Make sure that the signal source you selected is consistent with the access signal source.

1. The signal sources include “HDMI” and “AV”.
2. The image settings can be set as your favorite mode including “Image Mode”, “Aspect Ratio”, “Brightness”, “Contrast”, “Color” and “Sharpness”.
3. The sound settings can be set as your favorite sound. Optional “Sound Mode”, “Bass”, “treble”, “Balance”, and “Equalizer”.

WiFi Connection

Step 1: Choose “Setup” on the right of the interface, then “Network”.
Step 2: Find “Wifi”.
Step 3: Choose “Scan”. Select your wireless network from the list and type in the password.
Step 4: Press the “Exit” key on the remote control and then confirm the connection.

Bluetooth

The sound output of the KickAss projector can be streamed to your Bluetooth-compatible speakers.
Step 1. Choose “Setup” on the right of the interface, then “Bluetooth”.
Step 2. Ensure Bluetooth mode is “ON” and ensure your speakers or Bluetooth device is in the pairing mode.
Step 3. Select scan to search for the Bluetooth device.
Step 4. Once the scan has finished selecting the device to connect to. The sound output from the projector will now be directed from the internal speaker to the connected Bluetooth speaker or device.

Miracast

Step 1: Select the Miracast from the home page.
Step 2: Open the “wireless display” function of the Android device.

Step 3: Select the corresponding projector device name.

Attention: Note that different Android devices have different ways to open the “wireless display”. For details, please refer to the instructions for Android devices.

iOS Cast

Attention: The projector needs to be connected to the network firstly when using the Apple Airplay for the first time or finishing the projector upgrade.
Step 1: Select “iOS Cast” on the home page.
Step 2: iOS devices and projectors must be connected to the same network, or connect the iOS device to the wireless network issued by the projector.
Step 3: Open the control center of the iOS device, Choose “Screen Mirroring”.
Step 4: Choose the name of the projector device.

iOS Play Mode

Step 1: Select “Setup” in the “Home” interface.
Step 2: Find “Advanced”.
Step 3: Can set the desired iOS Play Mode.
iOS Play Mode:
Screen casting HD / screen mirroring HD / screen casting SD/screen mirroring SD.

Setup

Step 1: Select “Setup” in the “Home” interface.

Step 2: Find “Projection”.
Step 3: Can set the desired projection mode.

• Network:
  Scan / Auto IP / Static IP / disconnect
• Projection:
  Mounting Mode: Front Desktop / Rear Desktop / Front Ceiling / Rear Ceiling
• Advanced:

Language / Boot Source / Sleep Timer / iOS Play Mode / Local Update /Online Update / Restore Factory Default