Karcher K1700/ K1710 Electric
Pressure Washer User Manual

Machine Parts List

1. Water Inlet
2. High Pressure Outlet
3. Hose Connector
4. ON/Off Pedal
5. Power Cord Cleat
6. Nozzles
7. Turbo Nozzle
8. High Pressure Hose
9. Spray Wand
10. Spray Gun
11. Handle
12. Plug Storage
13. Wheel
14. Detergent Tank
15. Power Cord

K1700 Pressure Washer

Please read and comply with these original instructions prior to the initial operation of your appliance and store them for later use or subsequent owners.

Specifications

Hazard Levels

DANGER
Indicates “an imminently hazardous situation which, if not avoided, will result in death or serious injury.”

WARNING
Indicates “a potentially hazardous situation which, if not avoided, could result in death or injury.”

CAUTION
Indicates “a potentially hazardous situation which, if not avoided, may result in minor or moderate injury or in property damage incidents.”

Safety Instructions

WARNING
When using this product basic precautions should always be followed, including the following:

• Read all the instructions before using the product.
• To reduce the risk of injury, close supervision is necessary when a product is used near children.
• Know how to stop the product and bleed pressures quickly. Be thoroughly familiar with the controls.
• Stay alert – watch what you are doing.
• Do not operate the product when fatigued or under the influence of alcohol or drugs.
• Keep operating area clear of all persons.
• Do not overreach or stand on unstable support. Keep good footing and balance at all times.
• Follow the maintenance instructions specified in the manual.
• This product is provided with a Ground Fault Circuit Interrupter built into the power cord plug. If replacement of the plug or cord is needed, use only identical replacement parts.

WARNING
Risk of Injection or Injury – Do Not Direct Discharge Stream At Persons.

• High-pressure jets can be dangerous if misused. The jet must not be directed at persons, animals, electrical devices, or the unit itself.
• Wear safety goggles and ear protection.

WARNING
Risk Of Fire/Explosion – Do not spray flammable liquids.

• Do not use acids, alkaline, solvents, or any flammable material in this product. These products can cause physical injuries to the operator and irreversible damage to the machine.

WARNING
Risk of Electrocution

• Inspect cord before using – Do not use if cord is damaged.
• Keep all connections dry and off the ground.
• Do not touch plug with wet hands.
• Do not use extension cord with this product.
• Connect to individual branch circuit only.

CAUTION
This unit has been designed for use with cleaning detergents recommended by the manufacturer. The use of other cleaning detergents may affect the operation of the machine and void the warranty.

CAUTION
Gun kicks back – Hold with both hands.

• The trigger gun safety lock prevents the trigger from accidentally being engaged. This safety feature must be engaged when replacing nozzles or not in use.
• This safety feature DOES NOT lock spray in the ON position.

WARNING

• Do not spray electrical connections, electrical outlets or fixtures.
• Do not use with flammable liquids and toxic chemicals.
• High-pressure. Keep clear of nozzle.
• Injection hazard: Equipment can cause serious injury if the spray penetrates the skin. Do not point the gun at anyone or any part of the body. In case of penetration seek medical aid immediately.
• This system is capable of producing 1700 psi. To avoid rupture and injury, do not operate this pump with components rated less than 1700 psi working pressure (including but not limited to spray guns, hose and hose connections).
• Before servicing, cleaning or removing any parts, shut off power and relieve pressure.
• If connection is made to a potable water system, the system shall be protected against back flow.

Water Supply (Cold Water Only)

CAUTION
When connecting the water inlet to the water supply mains, local regulations of your water company must be observed. In some areas the unit must not be connected directly to the public drinking water supply. This is to ensure that there is no feedback of chemicals into the water supply. Direct connection via a receiver tank or backflow preventer, for example, is permitted.

Use a water filter to avoid potential damage from dirt in the water supply

• Garden hose must be at least 5/8 inch (16 mm) in diameter.
• Flow rate of water supply must not fall below 2 GPM/gallons per minute (7.6 L/min).
• Flow rate can be determined by running the water for one minute into an empty 5-gallon (18.9 liter) container.
• The water supply temperature must not exceed 104°F/40°C.
• Never use the pressure washer to draw in water contaminated with solvents, e.g. paint thinners, gasoline, oil, etc.
• Always prevent debris from being drawn into the unit by using a clean water source.

Ground Fault Circuit Interrupter Protection

This pressure washer is provided with a ground-fault circuit-interrupter (GFCI) built into the plug of the power- supply cord. This device provides additional protection from the risk of electric shock. Should replacement of the plug or cord become necessary, use only identical replacement parts that include GFCI protection.

Assembly Instructions

1. Insert wheels into the body of the machine. Secure with axle pin.
2. Push the handle into place.
3. Install the hose connector to the water inlet.
4. Attach nozzles to handle.

Operating Instructions

1. Thread one end of the high pressure hose tightly onto the high pressure outlet on the unit.
2. Thread the other end of the high pressure hose onto the spray gun inlet.
3. Insert the spray wand into the spray gun. Press it against the spring tension and twist into the locked position.
4. Thread the garden hose onto the water inlet connector and hand tighten.
5. Connect the garden hose to the cold water source and turn the water completely on.
6. Plug the Ground Fault Circuit Interrupter (GFCI) into a working outlet. We recommend that you test the GFCI as part of the start up procedure each time you use the machine. To learn how to perform this test, visit Karcher-help.com/ and search for GFCI. WARNING
   Do not use if GFCI fails test.
   NOTE: The actual appearance of the GFCI may be different from this illustration.
7. Unlock the Spray Gun safety lock. Trigger the gun to eliminate trapped air. Wait for a steady flow of water to emerge from the spray nozzle.
8. Turn on the machine by stepping down on the foot pedal.
   The motor starts when the trigger of the gun is pulled and shuts off when the trigger is released.

Using the Accessories

WARNING
To avoid serious injury, never point spray nozzle at yourself, other persons or animals.

CAUTION
Always test an inconspicuous area before cleaning with high pressure.

Using the Nozzles

Each of the nozzles has a different spray pattern. Before starting any cleaning job, determine the best nozzle for the job.

The Turbo Nozzle rotates in a zero degree spray pattern in a circular motion to break down tough dirt and grime. The spray pattern can cover an area of 4 to 8 inches (10 to 20 cm), depending on the distance between the tip and the surface being cleaned.

The 15° Nozzle is optimized for concentrated cleaning power and time. Use to remove paint, stains, mildew, oil, compacted dirt and grime from decks, siding, driveways and patios.

The Soap Nozzle is used to apply cleaning solution to any surface. Use to provide a thorough cleaning to all surfaces.

Working with Detergents

For best results see Cleaning Tips for specific information on how to clean different surfaces.

Always Use Kärcher Detergent for Best Results. Kärcher biodegradable detergents are specially formulated to protect the environment and your pressure washer. The special formula won’t clog the suction tube and will protect the internal parts of the pressure washer for a longer life.

For Kärcher detergents, check your retailer or visit our website: www.Karcher.com/us

CAUTION
Never Use:

• Bleach, chlorine products and other corrosive chemicals
• Liquids containing solvents (i.e., paint thinners, gasoline, oils)
• Tri-sodium phosphate products
• Ammonia products
• Acid-based products

These chemicals will harm the unit and will damage the surface being cleaned.

Use of these items will void the warranty.

Detergents can only be applied at low pressure.

1. Install the soap nozzle to the quick connect on the end of the wand.
2. Fill the soap tank with Kärcher detergent.
3. Turn on the pressure washer by step-ping on the foot pedal. Pull trigger to operate unit. Liquid detergent is drawn into the unit and mixed with water. Apply detergent to work area. Do not allow detergent to dry on surface.
4. To rinse, replace the soap nozzle with the 15° nozzle and pull trigger to operate.
5. Cleaning Up: Always run fresh water through the detergent tank when done to flush any remaining detergents from the injection system.

Taking a Break five minutes or more

1. Release trigger and engage gun safety lock.
2. Turn pressure washer OFF by stepping on the foot pedal.

Shutting Down & Cleaning Up

1. Turn the machine off by stepping on the foot pedal and unplug the cord from the outlet.
2. Turn off the water source.
3. Press trigger to release water pressure.
4. Release trigger and engage the gun safety lock.
5. Disconnect the garden hose from the water inlet on the machine.
6. Unthread and disconnect the high pressure hose from the machine.

Winterizing & Long Term Storage

1. Disconnect all water connections.
2. Turn on the machine for a few seconds, until the water which had remained in the pump exits, turn off immediately.
3. Do not allow high-pressure hose to become kinked.
4. Store the machine and accessories in a room which does not reach freezing temperatures. DO NOT store near furnace or other sources of heat as it may dry out the pump seals.

CAUTION
Failure to follow the above directions will result in damage to the pump assembly and accessories and will void the warranty.

Kärcher also recommends the regular practice of using a pump protector like “Kärcher Pump Guard” to prevent cold weather damage during storage in the winter months.

Maintenance Instructions

Cleaning the Water Inlet Filter

1. Disconnect the connector from the water inlet.
2. Rinse out the water inlet filter in warm water.
3. Thread the connector into the water inlet.

Maintenance

This unit is maintenance free

Cleaning Tips

CAUTION

• Before cleaning any surface an inconspicuous area should be cleaned to test spray pattern and distance for maximum cleaning results.
• If painted surfaces are peeling or chipping, use extreme caution as pressure washer may remove the loose paint from the surface.
• When using on surfaces which might come in contact with food, flush surfaces with plenty of drinking water.
• For additional cleaning tips, visit our website: www.Karcher.com/us/

Deck Cleaning

(With or without detergent).
Pre-rinse deck and surrounding area with fresh water. If using detergent, apply to surface at low pressure. For best results, limit your work area to smaller sections of approximately 25 sq. ft (2.3 m²). Allow detergent to remain on surface 1-3 minutes. Do not allow detergent to dry on surface. Rinse at high-pressure in a long sweeping motion keeping the spray
nozzle approximately 3-6 in. (7.5-15 cm) from the cleaning surface. Always clean from top to bottom and from left
to right. When moving on to a new section of the cleaning surface, be sure to overlap the previous section to eliminate stop marks and ensure a more even cleaning result.

House Siding

(With or without detergent).
Pre-rinse cleaning surface with fresh water. If using detergent, apply to surface at low pressure. For best results, limit your work area to smaller sections of approximately 6sq. ft. (1.8 m). Always apply detergent from bottom to top. Allow detergent to remain on surface 1-3 minutes. Do not allow detergent to dry on surface, if surface appears to be drying, simply wet down surface with fresh water. If needed, use special wash brush attachment (not included) to remove stubborn dirt. Rinse at high-pressure from top to bottom in an even sweeping motion keeping the spray nozzle approximately 6 ft. (1.8 m) from the cleaning surface.

Cement Patios, Brick and Stone

(With or without detergent).
Pre-rinse cleaning surface with fresh water. If using detergent or degreaser, apply to surface at low pressure. For best results, limit your work area to smaller sections of approximately 25 sq. ft. (2.3 m²). Allow detergent or degreaser to remain on surface 1-3 minutes. Do not allow detergent to dry on surface. Rinse at high pressure in a sweeping motion keeping the spray nozzle approximately 3-6 in. (7.5-15 cm) from the cleaning surface. For best results clean from top to bottom and from left to right. For removing extremely stubborn stains, use the Turbo Nozzle.

Cars, Boats and Motorcycles

(With or without detergent).
Pre-rinse vehicle with fresh water. If using detergent, apply to surface at low pressure. For best results, clean one side of vehicle at a time and always apply detergent from bottom to top, do not allow detergent to dry on surface. If needed, use special wash brush attachment (not included) to remove stubborn dirt. Rinse at high-pressure in a sweeping motion keeping the spray nozzle approximately 6-8 in. (15-20 cm) from the cleaning surface (distance should increase when rinsing pin-striping or other sensitive surfaces). For best results clean from top to bottom and from left to right. For best results, wipe surface dry with a chamois or soft dry cloth.

Barbecue Grills, Outdoor Power Equipment and Gardening Tools

(With or without detergent).
Pre-rinse cleaning surface with fresh water. If using detergent or Degreaser, apply detergent at low pressure. Allow detergent to remain on surface 1-3 minutes. Do not allow detergent to dry on surface. Rinse at high-pressure keeping the spray nozzle
approximately 3-6 in. (7.5-15 cm) from the cleaning surface. For removing extremely stubborn dirt, it may be necessary to move the spray nozzle even closer to the surface for greater dirt cutting action.

Patio and Lawn Furniture

(With or without detergent).
Pre-rinse furniture and surrounding area with fresh water. If using detergent, apply to surface at low pressure. Allow detergent to remain on surface 1-3 minutes. Do not allow detergent to dry on surface. If needed use special Wash Brush Attachment (not included) to remove stubborn dirt. Rinse at high-pressure in a sweeping motion keeping the spray nozzle
approximately 3-6 in. (7.5-15 cm) from the cleaning surface. For best results, clean from top to bottom and from left to right.

Optional Accessories

Optional accessories are available to further enhance your cleaning capabilities. These accessories are accurate as of the printing date of this manual. Please check our website for pricing and up-to-date information.

Pump Guard

Specially formulated to protect your pressure washer from freezing, corrosion and premature wear. The Pump Guard also adds lubrication to valves and seals to prevent sticking. Highly recommended for all Kärcher pressure washers!

Part Number 9.558-998.0

Troubleshooting

WARNING
Disconnect the unit from the power source before making any repairs.

If the symptom you are experiencing is not listed above, or if the provided solutions do not solve your issue, please visit our extensive online troubleshooting database at:
USA/Canada:
www.karcher-help.com
Mexico:
www.karcher.com.mx
Or Call:
1-800-537-4129

KARCHER K2 Power Control Pressure Washer

Diagram Instructions

KÄRCHER Home & Garden app

The KÄRCHER Home & Garden app contains:

• Installation and initial startup information
• Information about the areas of application
• Tips & Tricks
• FAQ with detailed troubleshooting
• Connection to the KÄRCHER Service Centre The app can be downloaded here:

Trademarks

• Google Play™ and Android™ are trademarks or registered trademarks of Google Inc.
• Apple® and App store® are trademarks or registered trademarks of Apple Inc.

Safety instructions

Read this safety chapter and these original instructions before using the device for the first time. Act in accordance with them. Keep the original instructions for future reference or for future owners.

• In addition to the notes in the operating instructions, you also need to take into consideration the general safety regulations and accident prevention guide-lines applicable by law.
• Warnings and information notices attached to the device provide important information for hazard-free operation.

Hazard levels

• DANGER
  Indication of an imminent threat of danger that will lead to severe injuries or even death.
• WARNING
  Indication of a potentially dangerous situation that may lead to severe injuries or even death.
• CAUTION
  Indication of a potentially dangerous situation that may lead to minor injuries.
• ATTENTION
  Indication of a potentially dangerous situation that may lead to damage to property.

Protective Gear

CAUTION

• Wear suitable protective clothing and safety goggles to protect yourself from water or dirt
  backsplash.
• Aerosols can be formed when using high-pressure cleaners. Inhaling aerosols can be harmful for your health. Depending on the application, the use of fully shielded nozzles (e.g. surface cleaners) can significantly lower the emission of aqueous aerosols. De-pending on the environment to be cleaned, wear a suitable respiratory protective mask of class FFP 2 or comparable to protect yourself from inhaling aerosols if the use of a fully shielded nozzle is not possible.

General Safety Instructions

DANGER

• Risk of asphyxiation. Keep pack-aging film out of the reach of children.

WARNING

• Only use the device for its proper use. Take into account the local conditions and beware of third parties, in particular children, when working with the device.
• Persons with reduced physical, sensory or mental capabilities and persons lacking experience and knowledge may only use the appliance if they are properly supervised, have been instructed on use of the appliance safely by a person responsible for their safety, and understand the resultant hazards involved.
• Children must not operate the device.
• Children must be supervised to prevent them from playing with the appliance.

CAUTION

• Safety devices are provided for your own protection. Never modify or bypass safety devices.

Risk of Electric Shock

DANGER

• Only connect protection class I de-vices to properly earthed power sources.
• Only connect the device to alternating current. The voltage indicated on the type plate must match the voltage of the power source.
• Only operate the device via a fault current protection switch (maximum 30 mA).
• Never touch the mains plug and socket with wet hands.
• The mains plug and coupling of the extension cable must be water tight and may not be placed in water. The coupling may not be on the floor. Use cable drums to ensure that the sock-ets are at least 60 mm above the floor. ● All live parts in the work area must be protected against water jets.

WARNING

• Only connect the device to an electrical connection which has been set up by a qualified electrician as per IEC 60364-1.
• Check that the mains connection cable with mains plug is undamaged each time before using the device. To avoid any possible danger, a damaged mains connection cable must be immediately replaced by the manufacturer, or the authorized customer service department or a qualified electrician.
• Do not damage the power supply and extension cable by running over it, crushing or yanking it or similar. Protect the power supply cable from heat, oil and sharp edges.
• Unsuitable electrical extension cables are dangerous. Only use approved and appropriately marked electrical extension cables with a sufficient line cross section when outdoors: 1-10 m : 1.5 mm2, 10-30 m : 2.5 mm2

CAUTION

• Always fully unwind the extension cable from the cable drum.
• In case of longer breaks in operation and after use, switch off the device at the main switch / device switch and pull the mains plug.

Operation

DANGER

• Operation in explosive atmospheres is prohibited.
• Never suction solvents, liquids containing solvents or undiluted acids. This includes e.g. petrol, paint thinner or heating oil. The spray mist is highly flammable, explosive and poisonous.
• Dam-aged wheels / tire valves are extremely dangerous. Damaged wheels / tire valves can be damaged by the high-pressure jet and explode. The first sign of this is discoloration of the tires. Keep a spray distance of at least 30 cm when cleaning the wheels / tire valves.

WARNING

• Do not use the device if people without the proper protective clothing are in its reach.
• Do not aim the high-pressure jet at yourself, e.g. to clean clothes or shoes.
• Do not direct the high-pressure jet at persons, animals, live electrical equipment or at the device itself.
• Do not spray any objects which contain harmful substances (e.g. asbestos).
• Check the device and the accessories, such as the high-pressure hose, high-pressure gun and safety devices, to make sure they are in proper safe and reliable condition before each operation. Do not use the device if it is dam-aged. Replace damaged components immediately.
• Only use high-pressure hoses, control panels and couplings specified by the manufacturer.
• Risk of scalding. When disconnecting the supply or high-pressure hose, hot water can leak out of the connections after operation.

CAUTION

• According to the applicable regulations, the appliance may never be used with the drinking water network without a system separator. Ensure that the connection to your house water system, with which the high-pressure cleaner is operated, is equipped with a system separator according to EN 12729 type BA.
• Water that has flowed through a system separator is no longer classified as drinkable.
• Never leave the device unsupervised while it is in operation.
• Recoil force from the water stream emerging at the high-pressure nozzle acts on the high-pressure gun. Keep proper footing and hold the high-pressure gun and spray lance firmly.
• Accidents or damage due to the device falling over. Before all actions with or on the device, you must make sure that it is stable.

ATTENTION

• Do not operate the device at temperatures below 0 °C.

Operation with Detergent

WARNING

• Incorrect use of detergents can cause serious injuries or poisoning.

CAUTION

• Keep the detergent out of the reach of children.
•  Only use the detergents supplied or specified by the manufacturer. The use of other deter-gents or chemicals can impair the safety of the device.

Care and Service

WARNING

• Always pull out the mains plug before all care and maintenance work.

CAUTION

• Have repair work and work on electrical components carried out by the authorized customer service only.

ATTENTION

• Do not use acetone, undiluted ac-ids or solvents, as they corrode the materials used on the device.

Transportation

CAUTION

• Risk of accidents and injuries. Take into account the weight of the device for transportation and storage. See chapter Technical data in the operating instructions.

Environmental Protection

The packing materials can be recycled. Please dispose of packaging in accordance with the environmental regulations.
Electrical and electronic appliances contain valuable, recyclable materials and often components such as batteries, rechargeable batteries or oil, which – if handled or disposed of incorrectly – can pose a potential danger to human health and the environment. However, these components are required for the correct operation of the appliance. Appliances marked by this symbol are not allowed to be disposed of together with the household rubbish.

• Cleaning work producing in oily waste water, e.g. washing engines, washing undercarriages etc., may only be performed at washing stations with an oil separator.
• Working with detergents may only be performed on watertight surfaces with connection to the waste water sewage system. Do not allow detergent to enter waterways or the soil.

Notes on the content materials (REACH)
Current information on content materials can be found at: www.kaercher.de/REACH

Intended Use

Use the high-pressure cleaner in private households only.
The high-pressure cleaner is intended for cleaning ma-chines, vehicles, buildings, tools, façades, terraces, garden machines etc. using a high-pressure water jet.

Accessories and Spare Parts

Only use original accessories and original spare parts. They ensure that the appliance will run fault-free and safely.
Information on accessories and spare parts can be found at www.kaercher.com.

Scope of Delivery

The scope of delivery for the appliance is shown on the packaging. Check the contents for completeness when unpacking. If any accessories are missing or in the event of any shipping damage, please notify your deal-er.

Description of the Device

The maximum amount of equipment is described in these operating instructions. Depending on the model used, there are differences in the scope of delivery (see packaging).
For the illustrations, refer to the graphics page Illustration A

1. Transport wheel
2. Storage for spray lance
3. Storage / parking position for high-pressure gun
4. Power Control spray lance dirt grinder for stubborn dirt, pressure level: HARD
5. Click-Vario Power Power Control spray lance for the most common cleaning tasks, pressure levels: HARD / MEDIUM / SOFT / MIX
6. Power Control high-pressure gun
7. Clamp for connecting / disconnecting the high-pres- sure hose
8. High-pressure gun lever
9. High-pressure gun lock
10. Trigger “0/OFF” / “I/ON”
11. Mains connection with mains plug
12. Storage hook for power cord
13. Carrying handle
14. Transport handle, telescoping
15. Quick coupling for high-pressure hose
16. Type plate
17. High-pressure hose
18. Water connection with integrated sieve
19. Detergent suction hose
20. Water connection coupling
21. **Garden hose with commonly available coupling
    • Fabric reinforced
    • Diameter of at least 1/2 inch (13 mm)
    • Length at least 7.5 m
22. *Washing brush, suitable for working with detergents
23. *Foam nozzle for powerful detergent foam
24. *Detergent container
    * optional, ** additionally required

Safety Devices

CAUTION
Missing or modified safety devices
Safety devices are provided for your own protection. Never modify or bypass safety devices.

Power Switch

The power switch prevents unintentional operation of the device.

High-pressure Gun Lock

The lock locks the lever of the high-pressure gun and prevents the device from starting unintentionally.

Auto-stop Function

If the lever of the high-pressure gun is released, the pressure switch turns off the pump and the high-pres-sure jet stops. The pump switches on again when the le-ver is pressed.

Assembly

For the illustrations, refer to the graphics section.
Fit the supplied loose parts onto the device before starting up the device.

Fitting the Wheels

1. Fasten and secure the wheels to the device.

Installing the Handles

1. Attach the transport handle.
2. Attach the carrying handle.

Installing the Water Connection Coupling

1. Screw the water connection coupling onto the water connection on the device.

Initial Startup

1. Place the device on a flat and level surface.
2. Insert the high-pressure hose into the quick coupling until it audibly latches into place.
   Illustration E
3. Connect the high-pressure hose to the high-pressure gun.
   • Squeeze the clamp.
   • Pull out the clamp.
   • Insert the high-pressure hose.
   • Press the clamp in until it latches into place.
4. Check for a secure connection by pulling on the high-pressure hose.
5. Plug the mains plug into a mains socket.

Water Supply

For the connection values, see the type plate or chapter Technical data.
Observe the water distribution company regulations.

ATTENTION
Damage through contaminated water Contamination in the water can damage the pump and the accessories.
KÄRCHER recommends using the KÄRCHER water filter for protection(special accessory, order number 4.730-059).

Connection to the Water Line

ATTENTION
Hose coupling with Aquastop on the water connection of the device
Damage to the pump
Never use a hose coupling with Aquastop on the water connection of the device.
You can use an Aquastop coupling on the tap.

1. Plug the garden hose onto the water connection coupling.
2. Connect the garden hose to the water line.
3. Open the water tap fully.

Operation

ATTENTION
Pump running dry
Damage to the device
If pressure does not build up in the device after 2 minutes then switch the device off and proceed according to the instructions in chapter Troubleshooting guide.

Power Control System

Note
The sensitivity of materials can vary greatly depending on age and condition. The recommendations are there-fore not binding.

Display	Pressure level	Recommended for e.g.
	HARD	Stone terraces made of paving stones or washed concrete, asphalt, metal surfaces, garden utensils (wheelbarrow, spade, etc.)
	MEDIUM	Cars / motorcycles, brick surfaces, plastered walls, plastic furniture
	SOFT	Wooden surfaces, bicycle, sandstone surfaces, rattan furniture
	MIX	Operation with detergent

High-pressure Operation

ATTENTION
Damage to painted or sensitive surfaces Surfaces can be damaged when the jet is too close to the surface or an unsuitable spray lance is used. Maintain a minimum spray distance of 30 cm when cleaning painted surfaces.
Do not clean car tyres, paint or sensitive surfaces such as wood with the dirt grinder.

1. Insert a spray lance into the high-pressure gun and lock it by turning it 90°.
2. Switch the device on (“I/ON”).
3. Unlock the lever of the high-pressure gun.
4. Press the lever of the high-pressure gun. The device switches on.

Operation with a Washing Brush

ATTENTION
Paint damage
Damage to surfaces through a dirty brush
Ensure that the washing brush is free from dirt or other particles before using it.

Note
The device operates at low pressure when using washing brushes. This means that detergent can be mixed with the water.

1. Insert the washing brush into the high-pressure gun and turn by 90° to fasten it.

Operation with Detergent

DANGER
Failure to adhere to the safety data sheet Incorrect handling of the detergent can seriously dam-age your health
Observe the safety data sheet of the detergent manufacturer, in particular the instructions on personal protective equipment.

Note
Detergent can only be mixed into the jet at low pressure.

Note
KÄRCHER detergents ensure fault-free operation. Ask us for a consultation, request our catalogue or our detergent information sheets.

1. Pull the desired length of the detergent suction hose out of the casing.
2. Hang the detergent suction hose in a container with detergent solution.
3. Use the Click-Vario Power spray lance.
4. Turn the spray lance to “MIX”.
   The detergent solution is mixed with the water jet during operation.
5. You can optionally use the foam nozzle.
   • Connect the foam nozzle to the detergent bottle.
   • Insert the foam nozzle into the high-pressure gun and turn by 90° to fasten it.

Recommended Cleaning Method

1. Spray the detergent sparingly on the dry surface and let it work for a while (do not let it dry).
2. Rinse off the loosened dirt with the high-pressure jet.

After Operation with Detergent

1. Flush the device with clear water for approx. 30 seconds.

Interrupting Operation

1. Release the lever of the high-pressure gun.
   The device switches off when the lever is released. The high pressure in the system is retained.
2. Lock the lever of the high-pressure gun. Illustration K
3. Place the high-pressure gun with the spray lance in the parking position.
4. Switch the device off “0/OFF” during work breaks longer than 5 minutes.

Ending Operation

CAUTION

Pressure in the system
Injuries from high-pressure water escaping uncontrollably
Only disconnect the high-pressure hose from the high-pressure gun or the device when the system is fully depressurized.

1. Release the lever of the high-pressure gun.
2. Close the water tap.
3. Press the lever of the high-pressure gun for 30 seconds.
   The pressure remaining in the system is discharged.
4. Release the lever of the high-pressure gun.
5. Lock the lever of the high-pressure gun.
6. Disconnect the device from the water supply.
7. Switch off the device “0/OFF”.
8. Pull the mains plug out of the socket.

Transport

CAUTION
Failure to observe the weight
Risk of injury and damage
Be aware of the weight of the device during transportation.

Carrying the Device

1. Lift up the device by the carrying handle, and carry it.

Pulling the Device

1. Pull the transport handle out until it audibly latches into place.
2. Pull the device via the transport handle.

Transporting the Device in a Vehicle

1. Secure the device against slipping and tipping over.

Storage

CAUTION
Failure to observe the weight
Risk of injury and damage
Be aware of the weight of the device during storage.

Storing the Device

1. Place the device on a level surface.
2. Disconnect the spray lance from the high-pressure gun.
3. Disconnect the high-pressure gun from the high-pressure hose.
4. Disconnect the high-pressure hose from the device.
5. Store the high-pressure hose on the device.
6. Store the mains connection cable and accessories on the device.

Observe the additional notes before storing the device for a long period of time, see chapter Care and service.

Frost Protection

ATTENTION
Danger of frost
Incompletely emptied devices can be destroyed by frost. Completely empty the device and accessories. Protect the device from frost.
The following requirements must be satisfied:

• The device is disconnected from the water supply.
• The high-pressure hose is removed.

1. Switch the device on “I/ON”.
2. Wait for a maximum of 1 minute until no more water escapes from the high-pressure connection.
3. Switch off the device.
4. Store the device in a frost-protected room, together with all accessories.

Care and Service

DANGER
Danger of electric shock
Injuries due to touching live parts
Switch off the device.
Remove the mains plug.
The device is maintenance-free, i.e. you do not need to perform any maintenance work.

Clean the sieve in the water connection

ATTENTION
Damaged sieve in the water connection
Damage to the device through contaminated water Check the sieve for damage before inserting it in the water connection.
If necessary, clean the sieve in the water connection.

1. Remove the water connection coupling.
2. Pull the sieve out using flat pliers.
3. Clean the sieve under running water.
4. Insert the sieve into the water connection.

Clean the Detergent Filter

Clean the detergent filter before longer periods of storage.

1. Pull the filter off the detergent suction hose.
2. Clean the filter under running water.

Troubleshooting Guide

Malfunctions often have simple causes that you can remedy yourself using the following overview. When in doubt, or in the case of malfunctions not mentioned here, please contact your authorised Customer Service.

DANGER
Danger of electric shock
Injuries due to touching live parts Switch off the device.
Remove the mains plug.

Device not running

1. Press the lever of the high-pressure gun.
   The device switches on.
2. Check that the voltage specified on the type plate corresponds to the voltage of the power source.
3. Check the mains connection cable for damage.

Device does not reach required pressure
The water supply is too low

1. Open the water tap fully.
2. Check the water inlet for an adequate flow rate.

The sieve in the water connection is dirty.

1. Pull the sieve in the water connection out using flat pliers.
2. Clean the sieve under running water.

Air is in the device.

1. Vent the device:
   • Switch on the device without a connected spray lance for a maximum of 2 minutes.
   • Press the high-pressure gun and wait until the water escaping from the high-pressure gun is free of air bubbles.
   • Connect the spray lance.

Strong pressure fluctuations

1. Clean the high-pressure nozzle:
   • Use a needle to remove dirt from the nozzle drill.
   • Rinse the high-pressure nozzle from the front with water.
2. Check the water supply volume.

Device leaking

1. The device leaks a small amount for technical reasons. If the leak is severe, request authorized Customer Service.

Detergent is not sucked in

1. Use the Click-Vario Power spray lance and turn it to “MIX”.
2. Clean the filter on the detergent suction hose.
3. Check the detergent suction hose for kinks.

Warranty

The warranty conditions issued by our relevant sales company apply in all countries. We shall remedy possible malfunctions on your appliance within the warranty period free of cost, provided that a material or manufacturing defect is the cause. In a warranty case, please contact your dealer (with the purchase receipt) or the next authorized customer service site.
(See overleaf for the address)

Technical Data

Electrical Connection

• Voltage – V – 220-240
• Phase – ~ – 1
• Frequency – Hz – 50-60
• Current consumption – A – 6
• Degree of protection – IPX5
• Protection class – II
• Power protection (slow-blowing) – A – 13

Water Connection

• Feed pressure (max.) – MPa – 1,2
• Input temperature (max.) – °C – 40
• Input amount (min.) – l/min – 8

Device Performance Data

• Operating pressure – MPa – 7,4
• Max. permissible pressure – MPa – 11,0
• Water flow rate – l/min – 5,5
• Maximum flow rate – l/min – 6,0
• Detergent flow rate – l/min – 0,3
• High-pressure gun recoil force – N – 11

Dimensions and Weights

• Typical operating weight – kg – 4,8
• Length – mm – 246
• Width – mm – 280
• Height – mm – 586

Determined values in acc. with EN 60335-2-79

• Hand-arm vibration value – m/s²  – <2,5
• Uncertainty K – m/s² – 0,3
• Sound pressure level LpA – dB(A) – 74
• Uncertainty KpA – dB(A) – 3

Declaration of Conformity

We hereby declare that the product described below complies with the relevant provisions of the following UK Regulations, both in its basic design and construc-tion as well as in the version put into circulation by us. This declaration shall cease to be valid if the product is modified without our prior approval.
Product: High-pressure cleaner
Type: 1.673-xxx

Currently applicable UK Regulations

• S.I. 2008/1597 (as amended)
• S.I. 2016/1091 (as amended)
• S.I. 2012/3032 (as amended)
• S.I. 2001/1701 (as amended)

Designated standards used

• EN 60335-1
• EN 60335-2-79
• EN 62233: 2008
• EN 55014-1: 2017
• EN 55014-2: 2015
• EN 61000-3-2: 2014
• EN 61000-3-3: 2013
• EN IEC 63000: 2018

Applied conformity assessment procedure
S.I. 2001/1701 (as amended): Schedule 8
Sound power level dB(A)
Measured: 88
Guaranteed: 90
The undersigned act on behalf and under the power of attorney of the company management.

EU Declaration of Conformity

We hereby declare that the machine described below complies with the relevant basic safety and health requirements in the EU Directives, both in its basic design and construction as well as in the version placed in circulation by us. This declaration is invalidated by any changes made to the machine that are not approved by us. Product: High-pressure cleaner
Type: 1.673-xxx

Currently applicable EU Directives

• 2006/42/EC (+2009/127/EC)
• 2014/30/EU
• 2011/65/EU
• 2000/14/EC

Harmonised standards used

• EN 60335-1
• EN 60335-2-79
• EN 62233: 2008
• EN 55014-1: 2017
• EN 55014-2: 2015
• EN 61000-3-2: 2014
• EN 61000-3-3: 2013
• EN IEC 63000: 2018

Applied conformity evaluation method
2000/14/EG: Annex V

Sound power level dB(A)

• Measured: 88
• Guaranteed: 90

The undersigned act on behalf and under the power of attorney of the company management.

Documentation supervisor:
S. Reiser
Alfred Kärcher SE & Co. KG
Alfred-Kärcher-Str. 28 – 40
71364 Winnenden (Germany)
Ph.: +49 7195 14-0
Fax: +49 7195 14-2212
Winnenden, 2021/01/01
www.kaercher.com/dealersearch
www.kaercher.com

KARCHER K 5 Pressure Power Control

Overview

Installation

Kärcher ‎1.516-330.0 EasyFix Steam Cleaner

Specifications

• Brand Karcher
• Surface Recommendation Floor
• Included Components Nozzle
• Wattage 1200 watts
• Item Weight 48 Pounds
• Item Display Dimensions ‎5 x 7.32 inches
• Power Source ‎Ac/dc
• Voltage ‎220 Volts
• Capacity ‎5.3 Tons
• Style ‎Mop
• Product Dimensions ‎12.64″D x 5″W x 7.32″H
• Volume ‎0.2 Liters

Description

The renowned German manufacturer Kärcher, known for its high-quality cleaning equipment, produces the Kärcher 1.516-330.0 Steam Cleaner, a very effective and adaptable cleaning tool. The natural power of steam is used in steam cleaning, a strong and environmentally friendly deep cleaning technique, to sanitize and remove dirt, grime, and bacteria from a variety of surfaces. The Kärcher 1.516-330.0 Steam Cleaner is built to deliver outstanding cleaning outcomes in both residential and business settings. It has a variety of cutting-edge features and cutting-edge technologies that make it a trustworthy and efficient cleaning solution. This steam cleaner’s high-pressure steam system, which produces a steady stream of hot pressurized steam, is one of its primary characteristics. This pressurized steam efficiently eliminates tough stains, grease, and filth from a variety of surfaces, including carpets, upholstered furniture, floors, and tiles. It ensures a complete and hygienic cleaning process by being able to access even the most difficult-to-reach regions.

Additionally, the Kärcher 1.516-330.0 Steam Cleaner includes a number of accessories and attachments that let customers customize it for various cleaning jobs. These add-ons, including as brushes, nozzles, and extension tubes, make it possible to clean specific regions and surfaces with accuracy. It also features a sizable water tank, so cleaning sessions last longer without requiring frequent refills. Safety and user convenience are also top priorities for this steam cleaner. It has an ergonomic handle for comfortable use and a safety lock feature to prevent unintentional steam emission. For simple operation and monitoring, the device is additionally built with user-friendly controls and indicators.

How To Use

1. Make careful to follow the manufacturer’s directions while filling the water tank with clean water. Ensure that the device is turned on and plugged into a power source.
2. Choose the proper attachment, such as a brush, nozzle, or extension tube, depending on the surface or area you wish to clean. Depending on the steam cleaner’s model, the specific attachments may change.
3. Make sure there are no obstructions or loose material in the area you want to clean. It is best to hoover or sweep the surface first to get rid of any loose dust or grime.
4. It is advised to test the steam cleaner on a small, discrete area before using it on delicate surfaces to be sure it won’t damage anything.
5. The surface you want to clean should be in the direction of the steam cleaner’s nozzle or brush attachment. To release the steam, press the steam trigger or button. Slowly and steadily move the attachment across the surface to allow the steam to permeate and dislodge the dirt.

How To Turn On

1. A power source must be securely connected to the steam cleaner.
2. Find the device’s power switch. It is usually marked with a power symbol (a circle with a vertical line), which is often seen on the steam cleaner’s main body.
3. The “On” position by flipping the power switch. The steam cleaner will turn on as a result.

How To Turn Off

1. On the steam cleaner, search for the power switch. Usually, it can be found on the device’s primary body.
2. Simply flip the switch to the “Off” position after you’ve found it. This will shut off the power supply and deactivate the steam cleaner.
3. Once the steam cleaner is switched off, it is advised to unplug it from the power source for safety and energy efficiency reasons. Additionally, this avoids unintentional activation.
4. It’s crucial to wait for the steam cleaner to cool down after shutting it off before storing it or doing any maintenance. By doing this, the chance of burns or damage is reduced.

Frequently Asked Questions

What surfaces can the Kärcher 1.516-330.0 Steam Cleaner be used on?

The Kärcher 1.516-330.0 Steam Cleaner can be used on a variety of surfaces, including carpets, upholstered furniture, floors, and tiles.

How does the Kärcher 1.516-330.0 Steam Cleaner work?

The Kärcher 1.516-330.0 Steam Cleaner uses the natural power of steam to sanitize and remove dirt, grime, and bacteria from surfaces.

What attachments come with the Kärcher 1.516-330.0 Steam Cleaner?

The Kärcher 1.516-330.0 Steam Cleaner comes with a variety of attachments, including brushes, nozzles, and extension tubes.

How do I turn on the Kärcher 1.516-330.0 Steam Cleaner?

To turn on the Kärcher 1.516-330.0 Steam Cleaner, make sure it is securely connected to a power source and flip the power switch to the “On” position.

How do I turn off the Kärcher 1.516-330.0 Steam Cleaner?

To turn off the Kärcher 1.516-330.0 Steam Cleaner, flip the power switch to the “Off” position and unplug it from the power source for safety and energy efficiency reasons.

How do I clean delicate surfaces with the Kärcher 1.516-330.0 Steam Cleaner?

It is advised to test the steam cleaner on a small, discrete area before using it on delicate surfaces to be sure it won’t damage anything.

How do I refill the water tank on the Kärcher 1.516-330.0 Steam Cleaner?

Follow the manufacturer’s directions while filling the water tank with clean water.

How do I use the attachments on the Kärcher 1.516-330.0 Steam Cleaner?

Choose the proper attachment, such as a brush, nozzle, or extension tube, depending on the surface or area you wish to clean.

How do I release the steam on the Kärcher 1.516-330.0 Steam Cleaner?

To release the steam, press the steam trigger or button.

How do I store the Kärcher 1.516-330.0 Steam Cleaner?

It’s crucial to wait for the steam cleaner to cool down after shutting it off before storing it or doing any maintenance. By doing this, the chance of burns or damage is reduced.

Is the Kärcher ‎1.516-330.0 Steam Cleaner suitable for all surfaces?

The steam cleaner is versatile and can be used on a variety of surfaces such as floors, tiles, carpets, upholstery, and more. However, it’s always recommended to check the manufacturer’s instructions and perform a spot test on a small, inconspicuous area before using it on delicate surfaces.

How long does it take for the steam cleaner to heat up?

The heating time can vary depending on the model and specific conditions, but typically, it takes a few minutes for the steam cleaner to heat up and be ready for use.