BASE UNIT + FULL HEIGHT PANEL KIT = FINISHED REFRIGERATOR

Easily transform these overlay refrigerators into one of our signature kitchen suite designs with one of our suite coordinating stainless steel panel kits. To do so, you must order one of the overlay base units (left column) and one of the suite-coordinating panel kits. The kits include refrigerator and freezer door panels, air grille and pre-installed handles.

Base Unit Model Number	Coordinating Stainless Full Height Panel Kits
	RISE™ Stainless		NOIR™ Stainless
Bottom-Freezer JB36NXFXRE JB36NXFXLE	JBBFR36NHL JBBFL36NHL		JBBFR36NHM JBBFL36NHM

OPTIONAL ACCESSORIES FOR CUSTOM OVERLAY DESIGNS

ARMOIRE-STYLE DOOR PANEL KIT

W10663562 – 36″ – Obsidian Interior

• For use with fully integrated and flush refrigerators.
• Enables installation and proper venting of full height custom door panels (not included) that hide the top panel.
• Includes left and right grille brackets and machine compartment cover.

RISE™ STAINLESS HANDLE KIT

W11231245 – Bottom-Freezer

• For use with Custom Overlay fully integrated built-in refrigerators.

NOIR™ STAINLESS HANDLE KIT

W11194767 – Bottom-Freezer

• For use with Custom Overlay fully integrated built-in refrigerators.

PRODUCT DIMENSIONS

FRONT VIEW

TOP VIEW

SIDE VIEW

• Add 11/4″ (3.2 cm) to the height dimension when leveling legs are fully extended.

AIRFLOW VENTING RECOMMENDATIONS

OPEN TO CEILING OR SOFFIT CABINET

• These type of installations require a minimum of 6″ (15.24 cm) of open space above the refrigerator. This space must not be blocked in any way, including soffits.
• Depth of cabinet must be less than 25″ (63.5 cm).
• If your opening does not meet these requirements, you will need to make modifications.

CLOSED SOFFIT CABINET

• Depth of cabinet must be less than 25″ (63.5 cm).
• Height of soffit must not exceed 84″ (213.3 cm).
• Following illustrations explain the cabinet construction (soffit and rear wall positions).
  
  Top View
  
  Front View
  Grey arrow = ambient air; Black arrow = warm air
  Cabinet depth 25″ and soffit located at 84″, provides proper airflow/ventilation to the refrigerator. Efficient cooling is achieved.
  Cabinet depth more than 25″ and/or soffit located at more than 84″, causes air gap at back and/or top of the refrigerator. Air gap allows warm air recirculation causing loss in cooling efficiency.
• If your opening does not meet these requirements, you will need to make modifications.

CLEARANCE DIMENSIONS

FRONT VIEW

BACK VIEW

Because Whirlpool Corporation policy includes a continuous commitment to improve our products, we reserve the right to change materials and specifications without notice.
Dimensions are for planning purposes only. For complete details, see Installation Instructions packed with product. Specifications subject to change without notice.

ELECTRICAL REQUIREMENTS

WARNING

Electrical Shock Hazard

• Plug into a grounded 3 prong outlet.
• Do not remove ground prong.
• Do not use an adapter.
• Do not use an extension cord.
• Failure to follow these instructions can result in death, fire, or electrical shock.

115 V, 60 Hz, AC only, 15 A or 20 A fused, grounded circuit is required. A dedicated circuit is recommended. Use an outlet that cannot be turned off by a switch. Do not use an extension cord.

WATER PRESSURE REQUIREMENTS

A cold water supply with water pressure between 30 psi and 120 psi (207 kPa and 827 kPa) is required to operate the ice maker. Call a licensed, qualified plumber with any questions about the water pressure.

Reverse Osmosis Water Supply

IMPORTANT: The pressure of the water coming out of a reverse osmosis system going to the water inlet valve of the refrigerator needs to be between 30 psi and 120 psi (207 kPa and 827 kPa).

If a reverse osmosis water filtration system is connected to the cold water supply, the water pressure to the reverse osmosis system needs to be a minimum of 40 psi to 60 psi (276 kPa to 414 kPa).

LOCATION REQUIREMENTS

WARNING

Explosion Hazard

• Keep flammable materials and vapors, such as gasoline, away from refrigerator.
• Failure to do so can result in death, explosion, or fire.

Floor must be able to support refrigerator (more than 600 lb [272 kg]), door panels and contents of the refrigerator and must be at the same level as flooring in the room.