JASCO All-in-One 7-day Digital Timer Installation Guide

JASCO All-in-One 7-day Digital Timer Installation Guide

Specifications

• Power: 120 VAC
• Signal Frequency: 60Hz
• Maximum Load: 1200 W tungsten, Ballast 1200VA, Electronic Ballast
  5A, 1/2 HP motor, 1800 W (15 A) restive
• Maximum Traveller Length: 200 ft.
• Operating Temperature:
  32-104 °F (0-40 °C)
• Operating Humidity: 5-85%
• Minimum Hole for Wire: #12 AWG (0.081 dia) and #14 AWG wire
• Warranty: 1-year limited product warranty
  Requires neutral wire. Switch must be mounted indoors.
  

  

Design Features

•  Simple myTouchSmart Programming
• SunSmart Technology – Automatically adjusts to sunrise and sunset times in your region
• 24 Hour Countdown Mode
• 7-Day – Daily or Weekly Settings
• 8 Custom my ON/my OFF settings
• ON/OFF button overrides the current setting and blends in with other switches
• Single Pole and 3-Way
• Easy Installation – Screw terminals, no flying leads
• Rechargable NiMH battery automatically saves settings and is a back up battery for up to 30 days
• Works with LED, CFL, Incandescent & Halogen · Light up backlight
•  White or Light Almond door gives timer a classy look and works as an On/Off Over-ride switch

White/light almond
covers included

ON/OFF switch
opens to reveal
program buttons

• Single-pole Wiring
  
• Timer on LOAD Side 3-way Installation
  
  
• Timer on LINE Side 3-way Installation
  
  
• Additional Installation Information
  • Indoor use only
  •  Wall plates sold separately
  •  Bilingual instruction manual – English and Spanish
  •  Visit myTouchSmart.com for more information
• Device Configuration
  
  1. Just scroll to set the current time
  2. Select your region so sunsmart technology /sunset times in your area.
  3. Choose from preset options or set custom times.
• Certifications & Compliances
  Compliances, specifications and availability are subject to change without notice Distributed by Jasco Products Company LLC 10 E. Memorial Rd., Oklahoma City, OK Questions? Contact our U.S.-based Consumer Care at 1-800-654-8483 between 7AM-8PM, M-F, Central Time.
  ©Jasco 2021

Related Products – myTouchSmart In-Wall Timers

• 41149
  In-Wall Wi-fi
  Smart Dimmer
  
• 41150
  Plug-in Wi-fi
  Smart Outlet
  
• 41147
  In-Wall Wi-fi
  Smart Switch
  
• 41431
  Simple Set 24hr
  Digital Timer
  
• 26893
  Simple Set
  In-Wall Timer
  

For additional myTouchSmart products visit myTouchSmart.com

JASCO GE Enbrighten Z-Wave In-Wall User Manual

Specifications

Power: 120/277VAC, 60Hz
Signal frequency: 908.4/916MHz
Maximum load: 120VAC: 960W incandescent, 1/2HP motor 1800W (15A resistive) 277VAC: 1385W incandescent, 1/2HP motor 1800W (15A resistive)
Range: Up to 150ft. from controller or closest Z-Wave device
Operating temperature: 32-104° F (0-40° C)
Warranty: 2-year limited product warranty.
Requires neutral wire. Switch must be mounted indoors.

Design Features

• QuickFit™ – Improved components reduce the housing depth by up to 20% compared to previous Z-Wave models and eliminated the need for heat tabs
• SimpleWire™ – Auto line-load sensing terminals support fast installation by detecting line and load wires and configuring the switch accordingly
• Dual ground ports, which are offset to avoid switch box mounting screws, support daisy-chaining in multi-switch setups
• Turn the connected device ON/OFF manually or via Z-Wave hub or controller
• Remotely monitor with any mobile device.
• Works with Google Assistant and Amazon Alexa (requires compatible hub
• May be used in single-pole installation or with up to five GE-branded model 46199 Add-on Switches in 3, 4, 5 or 6-way wiring configurations
• Works with all LED, CFL, incandescent and halogen bulbs
• Can be included in multiple groups and scenes
• Uses the Z-Wave firmware update meta data command class for standardized firmware updates over the air
• Supports advanced configuration — LED status, alternate exclusion
• Screw terminal installation — requires wiring connections for line (hot), load, neutral, and ground.
• Traveler wire required for multi-pole installation. Uses a standard decora®-Leviton wallplate (wallplate not included)
• Interchangeable paddle — White & light almond paddle included
• Blue LED indicator shows switch location or status with four setting options – ON when load is OFF, ON when load is ON, always OFF or always ON
• In-line traveler circuit protection
• Z-Wave Plus certified.

Z-Wave Plus with S2 Security and Smart Start Features

• Improved battery life and up to 50% greater wireless range
• QR codes with unique, industry-standard secure key exchange to add a layer of 128-bit encryption
• Effortless device pairing to Z-Wave S2 and Smart Start certified gateways
• Backward compatible with all generations of Z-Wave devices
• 250% faster processor
• 400% more memory · 50% more energy efficient · Supports wireless upgrades to future-proof your home.

White/light almond paddles included

Requires Z-Wave hub or controller, functions may vary depending on brand.

• Single-Location Wiring
  
  
• Space-Saving Screw Terminals
  
  
• Multi-Location Wiring
  

Installation Recommendations:

• Insert wire into port and tighten screw. Do not wrap wire around screw
• Indoor installation only
• Visit http://www.ezzwave.com/hubs for hub compatibility
• Wall plates sold separately
• Trilingual instruction manual – English, French, Spanish

Device Configuration

Adding your device to a Z-Wave network 

Once the hub is ready to add your smart switch, press and the top or bottom of the rocker on the smart switch.

To remove and reset the device 

Once the controller is ready to remove your device, press the top or bottom of the rocker on the smart switch.

S2 + Smart Start install 

The controller’s app will indicate if it has discovers the device. If prompted by the controller to enter the S2 security code, refer to the QR code/security number on the side of the box or the QR code label on the product. Enter the 5-digit code.

To return to factory defaults

Quickly press the ON button three times, then press the OFF button three times. The LED will flash ON/ OFF five times when completed.

Certifications & Compliances

Compliances, specifications and availability are subject to change without notice Distributed by Jasco Products Company LLC 10 E. Memorial Rd., Oklahoma City, OK ©Jasco 2019.

Light-Commercial Grade (120/277VAC)

• 43073 0-10V Smart Dimmer
  
• 43074 120/277V Smart Toggle Switch
  
• 43075 0-10V Smart Toggle Dimmer

Additional Paddle Colors

• 13940 Black Paddle
  
• 13943 Brown Paddle
  
• 13945 Ivory Paddle
  

Residential Grade (120VAC Only)

• 46199 Add-on Switch
  
• 46203 In-Wall Smart Dimmer
  
• 26931 In-Wall Smart Motion Switch
  
• 26933 In-Wall Smart Motion Dimmer
  
• 14288 In-Wall Smart Outlet
  
• 14287 In-Wall Smart Fan Control
  
• 14289 In-Wall Touch Dimmer
  
• 14299 In-Wall 1000W Smart Dimmer
  
• 46200 Add-on Switch
  
• 46201 In-Wall Smart Dimmer
  
• 46202 In-Wall Smart Switch
  
• 46204 In-Wall Smart Dimmer
  
• 32563 Smart Door Sensor
  
• 34172 Portable Wireless Solo Scene Remote
  
• 34174 Portable Wireless Duo Scene Remote
  
• 34176 Portable Wireless Quad Scene Remote