PLEASE READ ALL INSTRUCTIONS CAREFULLY
AND RETAIN FOR FUTURE USE

Getting started
Remove the product from the box.
Remove any packaging from the product.
Please retain all packaging after you have checked and counted all the parts and the contents against the list.

Specs for products：
Bluetooth version + SPECS：Bluetooth V4.2
Sensitivity：-80dBm<0.1%BER
Battery Specs：3.7V/60mAH
Charging voltage：DC5V 500mA
Charging time：About 1.5 hours
Working current：≤40mA
Standby current：<50uA
Temperature range：-40ºC to +85ºC
Play time：About 2 hours
Talk time：About 2 hours
Standby time：About 30 hours

Function description：
Turning On of device: Long press  Voice prompt “Power ON”.
Turning off of device：Long press Voice prompt “Power Off”.

Pairing status：
1：First time pairing：Boot into pairing mode automatically，Voice prompt
“the Bluetooth device is ready to pair”. Equipment open Bluetooth
connection interface option “2BOOM-EBN (Energy)” clik connect. After the
success of the matching voice prompt “The Bluetooth device is connected
successfully”。
2：Re-pairing：Under off status long press about 2 second，red and
blue LED flash alternately.
3：For already connected device, Bluetooth headphone will automatically
back to connect. Headphones into the matching status again.

Operation Guide：
Get through: Short press
Hang up: In a call short press
Replay the last phone number: Double-click
Play/Pause Music: Short press
Volume control to up and down: Long press
Song switch to up and down : Short press

LED Light status：
1：Charging status —–Long bright red light, full charged red light was off.
2：Device on prompt—–Blue light on
3：Pairing status—–Red and blue LED flash alternately
5：Standby status—–Blue light flash
6：Already connected status—Long bright blue light
7：Play status—–Blue light bright 1 second and flash 1 time.

Safety Instructions:
• Keep the unit away from heat sources, direct sunlight, humidity, water and any other liquids.
• Do not operate the unit if it has been exposed to water, moisture or any other liquids to prevent against electric shock, explosion and/or injury to yourself and damage to the unit.
• Do not use the unit if it has been dropped or damaged in any way.
• Repairs to electrical equipment should only be performed by a
qualified electrician. Improper repairs may place the user at serious risk.
• Do not use the unit with wet hands.
• Do not put objects into any of the openings.
• Keep the unit free from dust, lint etc.
• Do not use this unit for anything other than its intended use.
• Keep the unit out of reach of children.
• This product is not a toy.
• Do not use the handset at excessive volume levels, as damage to hearing may occur.

FCC Warning:
This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in  accordance with the instructions, may cause harmful interference to radio communications.
However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
• Reorient or relocate the receiving antenna.
• Increase the separation between the  equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.
Caution: Any changes or modifications to this device not explicitly  pproved by manufacturer could void your authority to operate this equipment This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received,
including interference that may cause undesired operation.

The device complies with RF specifications when the device used at 0mm
from your body.

VIRRAT WIRELESS EARBUDS WITH MIC
INSTRUCTION MANUAL

PRODUCT DIAGRAM

BLUETOOTH WIRELESS EARBUDS WITH MIC

FEATURES

• Works with all Bluetooth*-enabled devices
• Stream audio wirelessly via Bluetooth technology in high quality from up to 33 ft. away
• An integrated rechargeable battery provides hours of playing time wherever you go

CONTENTS

• Wireless Earbuds with Mic (1)
• 1 USB Charging Cable
• 1 User Manual

SPECIFICATIONS

• Power: Internal Li-Ion Rechargeable Battery
• Bluetooth Version: Bluetooth v5.0
• Wireless Capability: Up to 33 ft range
• Supply Voltage: DC 3.7V (not included)
• Driver Unit:10 mm
• Frequency Response: 20Hz-20KI-Iz
• Impedance: 32 ohms

CHARGING THE BATTERY

The internal battery must be fully charged before the first use of the wireless earbuds. To charge, use the included USB charge cable:

1. Insert the smaller micro-USB end of the cable into the CHARGE INPUT on the earbud unit.
2. Insert the larger USB end of the cable into the USB port of a computer OR into a compatible USB DC
3. 7V wall charger (not included) to charge through a standard wall outlet. The indicator lights up red during charging and will turn blue when charging is complete. Unplug from the power source when charging is complete.

NOTE: When battery power is low the LED may blink red and/or there may be an alerting sound, even while music is playing. Fully charge the battery as advised above to resume normal operation.

WIRELESS EARBUDS OPERATION

Wireless playback Via Bluetooth!:

1. Make sure the battery is charged as explained above.
2. On the controller, press and hold the POWER/PLAY BUTTON until the indicator light flashes blue and red – this means the Bluetooth function is active and ready to connect to your smartphone/Bluetooth audio device.
   NOTE: If you do not connect the earbuds with a Bluetooth device after 5 minutes of being turned on, the earbuds will turn off automatically. Restart this step to try to connect again.
3. Activate the Bluetooth function on your audio device – it should automatically recognize the earbuds unit and allow you to select it using the nome “iWorld”. If required, enter the password “0000” to complete the wireless connection. When the earbuds are connected, the indicator light on the controller will flash blue and you are now set to enjoy wireless audio from within a 33ft range of the audio device.
4. Before playback, first, adjust the volume of your audio device to a medium level as a safe starting point.
5. To play audio, click the POWER/PLAY BUTTON once.
6. To pause audio, click the POWER/PLAY BUTTON once.
7. To increase the volume, click the + button. To decrease the volume, click the – button. The earbuds make a chime sound when they reach maximum volume. You may then adjust the volume on your audio device to make it even louder or softer as you please.
8. To go to the next song, press and hold the + button. To go to the previous song, press and hold –
9. To answer an incoming call, click the POWER/PLAY BUTTON once.
10. To hang up a phone call, click the POWER/PLAY BUTTON once.
11. To disconnect and shut off the earbuds unit, press and hold the POWER/PLAY BUTTON until the indicator light goes out.

NOTE: Low earbuds power and/or low audio device power may cause poor operation and/or no Bluetooth connection.
CAUTION

• This is not a toy. Please keep away from small children.
• Please keep the unit away from water and heat.
• Do not overcharge the battery.

TECHNICAL SUPPORT

Please do not attempt to fix the product yourself. If you are experiencing any problems with the product please do not return it to the store you bought it from. You can contact our technical support representatives and they will assist you with any questions you may have. For assistance operating your product, please consult the User’s Manual or feel free to contact iWorld technical support:
I would LLC 65 West 36th St., 11th Floor
New York, NY 10018, USA
www.iworldnyc.com
email: support@iworldnyc.com
Please keep instructions for further reference.
© 2021 I World Global Wholesale LLC The Bluetooth `R-word mark and logos are registered trademarks owned by Bluetooth SIG, Inc., and any use of such marks by iWorld is under license. All other trademarks and trade names are those of their respective owners. The actual product may differ slightly from the image shown. MADE IN CHINA

This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.

CAUTION: Any changes or modifications to this device not explicitly approved by the manufacturer could void your authority to operate this equipment. This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. The device has been evaluated to meet general RF exposure requirements. The device can be used in portable exposure conditions without restriction.