Important: Only suitable for experienced and highly skilled drone pilots
*Disclaimer
This product is not a toy and should be used with extreme care and caution under controlled conditions. It should not be operated by people under 18 years of age, and it is not recommended for use when children are nearby. Please read this disclaimer carefully. Using the product and its relevant accessories means that you acknowledge and accept the terms of this disclaimer.
By using this product, you hereby acknowledge and agree that you are solely responsible for your own conduct when using this product and any consequences thereof. You agree to use this product only for proper and lawful purposes. You understand and agree that Arashi Vision Inc. (hereinafter referred to as ‘Insta360’) accepts no liability for any and all misuse, consequences, damages, injuries, penalties, or any other legal responsibility directly or indirectly incurred by your using this product and associated accessories. Before every use, make sure that your product and accessories are functioning properly. If there’s any damage or irregularity, stop using them immediately. Within the scope of state laws and regulations, Insta360 reserves the right of final explanation and revision for the commitment.
Open the package and verify you have the following items:
Insta360 Sphere * 1 Battery * 1 |
Sticky Lens Guard * 2 Charge Cable * 1 |
Lens Cap * 2 Lens Cloth & User manual |
*Flashing red: recording. Solid cyan: standby. Flashing blue: no SD card or SD card error.
Notes
1)Before use, open the battery door
( ① ) and insert the battery
( ② ). Please charge the Insta360 Sphere via the included Charge Cable in case of a low or depleted battery.
2. Before use, insert a MicroSD card.
Note:
Please use exFAT formatted microSD cards with the UHS-I bus interface and Video Speed Class V30 rating to ensure normal recording. The maximum supported storage space is 1TB.
3)Before use, stick the double-sided adhesive to the inner side of the Sticky Lens Guard, then stick the Sticky Lens Guards (with the double-sided adhesive) onto the lens.
Step 1: Open the Lock Lever to open the mounting bracket.
Step 2: As shown below, lock the mounting bracket’s connection buckle onto the bottom of the drone.
Step 3: Lock the Lock Lever well and ensure that the yellow mark of the Lock Lever is not showing.
Important: When recording long videos, please wait until the flashing red light turns to a solid cyan light when stopping recording, otherwise a video saving error may occur.
The Insta360 Sphere’s default shooting mode is 5.7K 30fps 360° video. If you need to adjust and set shooting modes and settings, please scan the QR code below https://www.insta360.com/download) or search “Insta360” in the App Store/Google Play Store to download and connect to the Insta360 app.
https://www.insta360.com/cn/download
Aperture: F2.0
35mm Equivalent Focal Length: 7.2mm
Battery Capacity: 1050mAh
Charging Method: Type-C
Use Environment: -5℃ to 40℃ (23° F to 104° F)*
Dimensions: 110×125×63mm (4.33×4.92×2.48in)
Weight: 192g (battery included
It’s not suggested to use the camera in low-temperature environments, or the battery’s endurance performance may be reduced.
The warranty period of the attached product is 1 year from the original retail purchase. Warranty service may vary according to the applicable laws of your state or jurisdiction. For detailed warranty policies, please visit http://insta360.com/support
Arashi Vision Inc.
Add: Foresea Life Center, Tower 2, 11F, 1100 Xingye Road, Haiwang Community,
Xin’an Street, Bao’an District, Shenzhen, China
Web: www.insta360.com
Tel: 400-833-4360 +1 800 6920 360
Email: [email protected]
EC REP
Insta360 GmbH
Ernst-Augustin-Str. 1a, 12489 Berlin, Germany
+49 177 856 7813
[email protected]