Infinity Sleek and Powerful Car Audio Multi-element Speakers Instructions

Sleek and Powerful Car Audio Multi-element Speakers and Component Systems Engineered for IncredInfinitye Sound and Designed to Fit Most Vehicles

Kappa Car Speakers. Make Your Drive Come Alive.

Infinity Kappa Series speakers, available in all standard sizes, are designed to bring a new standard of excellence in car audio to virtually any vehicle. Kappa’s Plus One™ fiberglass woofers deliver high-output, deep and robust bass. The high-resolution 3/4″ edge-driven textile dome tweeters deliver soaring highs up to 40kHz. 2″ and 3″ midranges are available to upgrade two-way component systems into three-way. The compact 3″ midrange speakers also offer a perfect plug-and-play solution with low frequency response to 300Hz, and high sensitivity.

Features

• 40kHz High-resolution Silk Dome Tweeter
• Patented Plus One™ Glass Fiber Woofers
• 0dB or -3dB Tweeter Output Level Control
• UniPivot and Angled Tweeter
• 3-way Upgradability
• Super Compact Design and High Sensitivity3″ Midrange Speaker
• Sleek and Powerful Industry Design
• Slim and Smart Crossover Design

Features and Benefits

40kHz High-resolution Silk Dome Tweeter
Kappa edge-driven silk dome tweeters equipped with oversized voice coils deliver silky smooth highs with impressive thermal power handling and 40kHz high resolution.

Patented Plus One™ Glass Fiber Woofers
Infinity’s glassfiber woofer cones are lighter and stiffer with more cone-area than the competition, delivering increased low-frequency output and higher efficiency. Hearing is believing.

0dB or -3dB Tweeter Output Level Control
The push-button on the angled tweeter allows tweeter output level control of 0dB or -3dB to optimize system linearity based on installation location.

UniPivot and Angled Tweeter
For 5-1/4″, 6-1/2″ and 6″ x 8″ coaxial models, the tweeters are angled and can be rotated 270° after installation on most models. This gives you imaging options and the ability to elevate the soundstage on low mounted speakers.

3-way Upgradability
Kappa 2-way component system crossovers are compact and equipped with 2-way and 3-way selections to accommodate a 2″ or 3″ midrange upgrade. The optional 2″ or 3″ midrange includes a bandpass crossover to upgrade a two-way system into a three-way system with perfect tonal balance.

Super Compact Design and High Sensitivity 3″ Midrange Speaker
Kappa 3″ midrange delivers low-frequency response to 300Hz while keeping high sensitivity over 89dB. The super compact design and premium performance allows the midrange to fit more vehicles without sacrificing any of your audio experience.

Sleek and Powerful Industry Design
The essence of form and function, Kappa tweeters are elegantly designed deliver a car audio experience as powerful as it is beautiful.

Slim and Smart Crossover Design
Kappa component systems all have very slim crossovers, which equipped with connection cable for easy installation. The push-button on crossover allows tweeter output level control of 0dB or -3dB to optimize system linearity based on installation location.

What’s in the box:

KAPPA 63XF

• 2x Speakers
• 2x Plastic multi-hole adapter rings
• 2x Foam gaskets
• 8x Screws
• 8x Screws
• 8x Speed clips
• 2x Infinity logo badges
• 2x Brand stickers
• Owner’s manual

KAPPA 603CF

• 2x Speakers
• 2x Plastic multi-hole adapter rings
• 2x Foam gaskets
• 2x Crossovers
• 2x Tweeters
• 2x Threaded flush-mount adapters
• 2x Plastics locking nuts
• 2x Surface-mount cups
• 2x Starfish tweeter mounts
• 30x Screws
• 16x Speed clips
• 1x Allen head bit (2.5mm)
• 2x Infinity logo badges
• 2x Brand stickers
• Owner’s manual

KAPPA 693M

• 2x Speakers
• 2x Grilles
• 2x Foam gaskets
• 2x Spacers
• 8x Screws
• 8x Speed clips
• 2x Infinity logo badges
• 2x Brand stickers
• Owner’s manual

KAPPA 693C

• 2x Speakers
• 2x Grilles
• 2x Spacers
• 2x Foam gaskets
• 2x Crossovers
• 2x Tweeters
• 2x Threaded flush-mount adapters
• 2x Plastic locking nuts
• 2x Surface-mount cups
• 2x Starfish tweeter mounts
• 22x Screws
• 16x Speed clips
• 1x Allen head bit (2.5mm)
• 2x Infinity logo badges
• 2x Brand stickers
• Owner’s manual

KAPPA 683XF

• 2x Speakers
• 2x Spacers
• 2x Foam gaskets
• 8x Screws
• 8x Speed clips
• 2x Infinity logo badges
• 2x Brand stickers
• Owner’s manual

KAPPA 463XF

• 2x Speakers
• 2x Foam gaskets
• 8x Screws
• 8x Speed clips
• 2x Infinity logo badges
• 2x Brand stickers
• Owner’s manual

KAPPA 53XF

• 2x Speakers
• 2x Foam gaskets
• 8x Screws
• 8x Speed clips
• 2x Infinity logo badges
• 2x Brand stickers
• Owner’s manual

KAPPA 503CF

• 2x Speakers
• 2x Foam gaskets
• 2x Crossovers
• 2x Tweeters
• 2x Threaded flush-mount adapters
• 2x Plastics locking nuts
• 2x Surface-mount cups
• 2x Starfish tweeter mounts
• 22x Screws
• 16x Speed clips
• 1x Allen head bit (2.5mm)
• 2x Infinity logo badges
• 2x Brand stickers
• Owner’s manual

KAPPA 203S

• 2x Midrange driver
• 2x Grilles
• 2x Crossovers
• 2x Cables
• 2x Custom Fit Mounting Adapters
• 2x Foam gaskets
• 24x Screws
• 8x Speed clips
• 1x Allen head bit (2.5mm)
• 2x Infinity logo badges
• 2x Brand stickers
• Owner’s manual

KAPPA 303S

• 2x Midrange driver
• 2x Grilles
• 2x Crossovers
• 2x Cables
• 2x Foam gaskets
• 16x Screws
• 8x Speed clips
• 1x Allen head bit (2.5mm)
• 2x Infinity logo badges
• 2x Brand stickers
• Owner’s manual

KAPPA 753T

• 2x Tweeters
• 2x Threaded flush-mount adapters
• 2x Plastic locking nuts
• 2x Surface-mount cups
• 2x Starfish tweeter mounts
• 6x Screws
• 2x Crossovers
• 2x Infinity logo badges
• 2x Brand stickers
• Owner’s manual

Technical Specifications:

KAPPA 63XF

• 6-1/2″ (165mm) Two-way Car Speaker
• Power Handling: 85Wrms, 255W peak
• Sensitivity (@ 2.83V): 93dB
• Frequency Response: 45Hz – 40kHz
• Impedance: 3.0 ohms
• Gross weight: 2.56kg

KAPPA 603CF

• 6-1/2″ (165mm) Two-way Component Speaker System
• Power Handling: 110Wrms, 330W peak
• Sensitivity (@ 2.83V): 93dB
• Frequency Response: 45Hz – 40kHz
• Impedance: 3.0 ohms
• Gross weight: 2.9kg

KAPPA 693M

• 6″ x 9″ (168mm x 240mm) Three-way
• Car Speaker
• Power Handling: 120Wrms, 360W peak
• Sensitivity (@ 2.83V): 94dB
• Frequency Response: 35Hz – 40kHz
• Impedance: 3.0 ohms
• Gross weight: 5.04kgs

KAPPA 693C

• 6″ x 9″ (168mm x 240mm) Two-way
• Component Speaker System
• Power Handling: 145Wrms, 435W peak
• Sensitivity (@ 2.83V): 94dB
• Frequency Response: 35Hz – 40kHz
• Impedance: 3.0 ohms
• Gross weight: 5.26kg

KAPPA 683XF

• 6″ x 8″ (147mm x 205mm) Two-way
• Car Speaker
• Power Handling: 100Wrms, 300W peak
• Sensitivity (@ 2.83V): 93dB
• Frequency Response: 40Hz – 40kHz
• Impedance: 3.0 ohms
• Gross weight: 2.862kg

KAPPA 463XF

• 4″ x 6″ (104mm x 157mm) Two-way Car Speaker
• Power Handling: 60Wrms, 180W peak
• Sensitivity (@ 2.83V): 93dB
• Frequency Response: 75Hz – 40kHz
• Impedance: 3.0 ohms
• Gross weight: 1.686kg

KAPPA 53XF

• 5-1/4″ (133mm) Two-Way Car Speaker
• Power Handling: 60Wrms, 180W peak
• Sensitivity (@ 2.83V): 93dB
• Frequency Response: 55Hz – 40kHz
• Impedance: 3.0 ohms
• Gross weight: 2.23kg

KAPPA 503CF

• 5-1/4″ (133mm) Two-Way Component Speaker System
• Power Handling: 80Wrms, 240W peak
• Sensitivity (@ 2.83V): 93dB
• Frequency Response: 55Hz – 40kHz
• Impedance: 3.0 ohms
• Gross weight: 2.52kg

KAPPA 203S

• 2″ (50mm) Silk Dome Midrange with
• Bandpass Crossover Enclosure
• Power Handling: 50Wrms, 150W peak
• Sensitivity (@ 2.83V): 94dB
• Frequency Response: 500Hz – 7kHz
• Impedance: 3.0 ohms
• Gross weight: 0.82kg

KAPPA 303S

• 3″ (89mm) Midrange with Bandpass Crossover Enclosure
• Power Handling: 55Wrms, 165W peak
• Sensitivity (@ 2.83V): 93dB
• Frequency Response: 200Hz – 15kHz
• Impedance: 3.0 ohms
• Gross weight: 0.78kg

KAPPA 753T

• 3/4″ (19mm) Edge-Driven Silk Dome Tweeter
• Power Handling: 50Wrms, 150W peak
• Sensitivity (@ 2.83V): 93dB
• Frequency Response: 2kHz – 40kHz
• Impedance: 3.0 ohms
• Gross weight: 0.306kg

HARMAN International Industries, Incorporated
8500 Balboa Boulevard, Northridge, CA 91329 USA
www.infinityspeakers.com

© 2020 HARMAN International Industries, Incorporated. All rights reserved. Infinity is a trademark of HARMAN International Industries, Incorporated, registered in the United States and/or other countries. Features, specifications and appearance are subject to change without notice.

car amplifier Instructions

Series of high-performance mono, 4 and 5 channel car amplifiers.

Infinity’s Reference 7005A 5-channel amplifier provides a full system solutions without breaking a sweat, and it’ll look good doing it. It delivers 50-Watts RMS to each of the front and rear speakers, and a ground pounding 500-Watts RMS to the subwoofer channel — a much better balance of “speaker-to-sub” power than most of conventional 5-channel amplifiers on the market. For higher output, you can bridge the amp to 3-channel mode and power your front speakers with 140-Watts per channel, while still delivering 500-Watts to the subwoofer channel. Speaker-level inputs allow the Reference 7005A to work in almost any system, even if you’re keeping your factory radio. Separate high-pass and low-pass crossovers on the front and rear channels and dedicated lowpass crossover, bass boost, and phase switch for the subwoofer channel provides an incredible amount of control and tuning capability. The Reference 7005A is truly a total system solution in one easy to install chassis.

Features

• Compact size
• High and low level input
• Variable crossover and bass boost
• Low noise and distortion
• Input Level Control
• Full on-board protection
• Phase Switch
• RBC wired remote
• Class AB+D amp technology
• Turn-on mode

Compact size
The Infinity Reference 7005A amplifier feature a low-profile chassis and a small overall footprint to fit in more vehicles where available space is limited.

High and low level input
Speaker-level and low-level inputs allow the Reference 7005A to integrate with both aftermarket and factory car stereo systems.

Variable crossover and bass boost
Unlike many amplifiers available at similar prices, Infinity Reference amps feature variable electronic crossovers and bass boost circuit to allow for fine-tuning.

Low noise and distortion
Produces tight bass with low distortion at high SPL. Balanced Differential Inputs are used to ensure low noise.

Input Level Control
When low-level inputs are used, this control adjusts the input sensitivity between 200mVrms and 2.0 Vims. When high-level inputs are used, this control adjusts the input sensitivity between 2Vrms and 20Vrms.

Full on-board protection
The on-board circuitry to protect them from shorts, temperature, overvoltage and under voltage. An LED indicator is included on all four models to let you know when one of these conditions exists.

Phase Switch
This switch changes the input phase to inverted or non-inverted. This is especially helpful with the subwoofer channel.

RBC wired remote
The RBC wired remote is an easy installation and can be mounted for convenient volume adjustment from driver’s seat.

Class AB+D amp technology
The Infinity Reference 7005A 5 channels subwoofer amplifier delivers 780-Watts RMS using a Class AB+D amplifier design to ensure high output and minimum current draw.

Turn-on mode
This switch changes DC to REM to adapt with low-level signals or high-level signals, this is especially helpful as part of remote turn-on lead of your installation more choice. A selectable “Turn-on mode” can protect battery to avoid current drain, when you don’t expect turn on your amplifier.

What’s in the Box:

One Reference 7005A five channel amplifier
4 Bare wire-to-RCA adapters
Six 30A ATO fuses (3 installed, 3 spare)
Remote bass control module
16.5′ Remote control cable (RJ-25 plugs on both ends)
2 Self-tapping screws for remote (M3 x 15mm)
4 Mounting screws (M4 x 53mm)
Owner’s Manual
2 Infinity decals
1 logo bandage

Specifications:

• 5 channel car amplifier
• 50 watts RMS x 4 + 320 watts RMS x 1 at 4 ohms
• 65 watts RMS x 4 + 500 watts RMS x 1 at 2 ohms
• 140 watts RMS x 2 bridged at 4 ohms + 500 watts RMS x 1 at 2 ohms
• Variable high- and low-pass filters (32­320Hz, 12dB/octave) on front and rear channels
• Low-pass filter (32­320Hz, 12dB/octave) on subwoofer channel
• Bass boost on subwoofer channel (0-12dB at 45Hz)
• Phase switch on subwoofer channel (0, 180 degrees)
• Preamp and speaker-level inputs
• Fuse rating: 30A x 3
• 4-gauge power and ground leads recommended — wiring and hardware not included with amplifier
• W x H x D = 360mm x 55.5mm x 180mm W x H x D = 14-3/16″ x 2-3/16″ x 7-1/8″

HARMAN International Industries, Incorporated 8500 Balboa Boulevard, Northridge, CA 91329 USA www.infinityspeakers.com

© 2019 HARMAN International Industries, Incorporated. All rights reserved. Infinity is a trademark of HARMAN International Industries, Incorporated, registered in the United States and/or other countries. Features, specifications and appearance are subject to change without notice.

GLIDE N1 20
In-Ear Wireless Headphones

Get, set, play.

Glide N120 is a new-age Bluetooth wireless flex-neckband earphone, for your everyday communication and entertainment needs. It comes with premium metal housing for that sturdy, stylish finish.
Experience high-fidelity stereo sound with the dual equalizer feature that lets you switch between normal and deep bass mode effortlessly. The snug-fit, neckband offers you great comfort and advanced Bluetooth So technology ensures clear communication by giving faster connection over a long-range.
Not to forget, it’s also loaded with other features like 7 hours of playtime, IPX5 sweat-resistant technology, magnetic earbuds, and more. So that your music experience becomes a truly enjoyable joyride.

Features

► Premium Metal Earbuds
► Flex-Neckband
► Advanced Bluetooth 5.0 Technology
► 12 mm Large Drivers
► Dual Equalizer Mode
► 3-Button Remote
► 7 hours of Playtime
► Magnetic Earbuds
► Voice Assistant Integration IPX5 Sweat Proof

Features and benefits

Premium Metal Earbuds
Look good while you listen with stylish sturdy metal casing, designed to withstand the roughest of usage. The silicon ear-tips come in 3 different sizes (S, M, L) ensuring a perfect ergonomic fit for every ear.
Flex-Neckband
The cutting-edge, snug-fit technology offers a comfortable and sturdy fit. This ultra-lightweight headphone is great for both indoors and outdoors. So, keep it around your neck all day long, even when you’re not listening.
Advanced Bluetooth 5.0 Technology
Going wireless with Bluetooth. Be amazed by the distortion-free connectivity and high-fidelity sound that comes with the latest Bluetooth 5.0 technology. Enjoy a faster connection over a longer range, with lesser power consumption!
12 mm Large Drivers
Feel your music during a workout-fuelling, bass-driven listening experience advanced acoustic design with the 12 mm composite driver, delivers a true stereo sound with distortion-free bass from different genres.
Dual Equalizer Mode
Comfortably switch between normal or deep bass mode based on your listening preference. Enjoy that powerful, well-balanced, club-like bass by just pressing the Vol Up and Down buttons. It’s pure immersive sound at your fingertips!
3-Button Remote
Equipped with a three-button remote and a built-in microphone, Glide N120 lets you play, pause, move to the next track, answer calls and so much more. Enjoy multitasking and the hands-free experience – all in one product.
7 hours of Playtime
Enjoy uninterrupted music or talk time for up to 7 hours with the advanced Glide N120 It also comes with a quick charge option for re-fuelling. So, let the music play on!
Magnetic Earbuds
These beautifully designed premium magnetic earbuds snap together like art. So, feel free to hang them around your neck when not in use, for a tangle free, secure experience, that’s trendsetting too.
Voice Assistant Integration
Glide N120 seamlessly integrates with Google Now/Sin on your phone by just pushing the power button twice. Now get to know the weather, check traffic, or send a message to a friend, without viewing your phone!

What’s in the box :

1 x Wireless In-Ear Headphone
1 x Charging Cable
3 Pair Ear Sleeves
1 x User Manual

• Wired/Wireless: Wireless
• Form factor: Flex Soft neckband
• Driver Size: 012mm
• Driver/Ear: 1
• Driver Sensitivity (1KHz / 1 mW) : 102+5dB
• Impedance (ohms) : 320
• IPX Rating: IPX5
• Frequency Range: 20Hz-20KHz
• Battery Type: Polymer
• Battery Capacity: 3.7V 85mAh
• Charging Time (hours from empty): About 1.5 hrs
• Speed charging time
• Talk time (Hours): 50% volume about 7 hrs
• Play Time (Hours): 50% volume about 7 hrs
• Charging Type: Micro interface charging
• Deep Bass: YES
• Dual EQ: YES
• Rechargeable battery: YES
• Flat cable: the ONLY Neckband is a flat cable
• Built-In Microphone: YES
• Siri/Google Now: YES
• Bixby: NO
• Bluetooth Version: Bluetooth 5.0
• Headphone cable length (meters) : 820±10mm
• Product Weight (grams) : 195g
• Box Dimension (H x W x D) : 145x32x185mm
• Box Weight (Grams) : 30g.

HARMAN International Industries, Incorporated 8500 Balboa Boulevard, Northridge, CA 91329 USA www.jbI.com

© 2020 HARMAN International Industries, Incorporated. All rights reserved. JBL is a trademark of HARMAN International Industries, Incorporated, registered in the United States anchor other countries. The Bluetooth* word mark and logos are registered trademarks owned by the Bluetooth SIG, Inc., and any use of such marks by HARMAN International Industries, Incorporated is under license. Google is a trademark of Google LLC. Other trademarks and trade names are those of their respective owners. Features, specifications arid appearance are subject to change without notice.