HONDA 2022 Accord 4D Head-Up Display

Head-Up Display

Shows the current mode for ACC with Low Speed Follow and LKAS, tachometer, traffic sign recognition system, shift position indicator, M (sequential mode*/7- speed manual shift mode*) Indicator/Gear Selection Indicator, compass or turn-byturn directions along with the vehicle speed. You can choose which item to be displayed using the (HUD) button on the steering wheel. They are displayed
when the power mode is in ON.

To turn the head-up display on and off: Press the HUD button on the driver side control panel. The display can be moved up and down to become level with your eyes.
To raise or lower the head-up display: Press the or button until the desired position is reached.

Head-Up Display
When you unlock and open the driver’s door with a remote transmitter or keyless access system, the head-up display adjusts automatically to one of the two preset positions.

The display also shows the following
warnings.

• Lane Departure Warning: When your the vehicle is too close to the traffic lane lines, the lane departure warning appears.
• Lane Keeping Assist System (LKAS) P. 486
• Head-up Warning Lights: Flash when the BRAKE message appears on the driver information interface.
•  Collision Mitigation Braking SystemTM (CMBSTM) P. 456
•  Adaptive Cruise Control (ACC) with Low Speed Follow P. 470
•  Low Speed Braking Control* P. 465

To Change Head-Up Display Content

Each time you press the (HUD) button on the steering wheel, the head-up display content will change.

Vehicle Speed
Shows your driving speed in mph or km/h.

Tachometer
Shows the number of engine revolutions as a bar graph.

Shift Position Indicator
Shows the current shift position. 2 Shift Position Indicator P. 88

M (sequential mode*/7-speed manual shift mode*) Indicator/Gear Selection Indicator
Shows the current mode for the sequential mode*/7-speed manual shift mode*.

Current Mode for ACC with Low Speed Follow and LKAS
Shows the current mode for ACC with Low Speed Follow and LKAS.

•  Adaptive Cruise Control (ACC) with Low Speed Follow P. 470
• Lane Keeping Assist System (LKAS) P. 486

1Vehicle Speed
Switch between mph and km/h by using the driver information interface or customized features on the audio/information screen.

• Speed/Distance Units P. 151
• Customized Features P. 351

Navigation

Compass
Shows the compass screen.
Turn-by-Turn Directions
When driving guidance is provided by the navigation system, Android Auto or Apple
CarPlay, turn-by-turn directions to your destination appear.

•  Refer to the Navigation System Manual
• Android Auto P. 320
• Apple CarPlay P. 313

Traffic Sign Recognition System
Shows the traffic sign recognition system.

•  Traffic Sign Recognition System P. 498

Navigation
You can select whether the turn-by-turn display comes on during the route guidance.

• Customized Features P. 351 Turn-by-turn directions may not be available for all apps.

SPECIFICATIONS

WHAT’S IN THE BOX

POWER

LCD Screen Switch
Press the power button to check the remaining battery.

LCD SCREEN

Power Level Percentage
Check the battery level by pressing the display button before use. If battery is at a low level, charge first.

Power of Input & Output (W)
If the HLS 200’s total output exceeds 100W, it will automatically shut off. Please ensure the power consumption is less than 100W, then press the power button.

Low & High Temperature Alarm
The HLS 200 power your devices at temperatures ranging from 0 – 40°C (32 – 104 °F). If your working temperature is outside this range, the HLS 200 may stop working.

DC INPUT

For Wall Charger, Car Charger and Solar Panel (optional)

CHARGING

Here are some common devices and their power requirements for each charging port.

If the HLS200’s total output exceeds 100W, it will automatically shut off. Please ensure the power consumption is less than 100W, then press the power button.

RECHARGING

Before use or storage, plug your HLS 200 into the wall until it is fully charged. If the display shows less than 20% capacity, plug it into a power source, like an AC outlet or a solar panel, as soon as possible. There are many ways to recharge your HLS 200:

SAFETY INSTRUCTIONS

Observe these instructions to ensure safe usage. Explanation of symbols:

DANGER
Noncompliance may very likely lead to serious injury” or death

• DO NOT disassemble, repair or modify the unit or the battery.
• DO NOT place the unit close to or in a fire or expose It to heat. Keep out of direct sunlight.
• DO NOT charge, use or store the unit in a bathroom or in an area exposed to rain or moisture.
• Only use the output socket to power external devices. Never connect the output to mains power under any circumstances.
• DO NOT touch the unit or the plug-in points if your hands are wet.
• DO NOT connect any metallic objects to the AC input or output.
• DO NOT rub your eyes if fluid from inside the unit should get in your eyes.
• DO NOT dispose the unit together with household waste.
• DO NOT use any inappropriate power cords.
• DO NOT operate the unit above the specified input voltage.
• DO NOT use the unit if it is not functioning correctly.
• DO NOT move the unit if it is recharging or in use.

WARNING
Noncompliance may lead to serious injury”‘ or death

• Use and store the unit only in a clean and dry environment. Do not use and store in dusty and wet environment.
• Check the unit prior to every use. Do not use the unit if it is damaged, broken.
• Do not use the unit if the power cord is damaged or broken.
• Keep the unit away from children. Do NOT let children use the power supply unit.
• Keep this product away from pets.
• Do NOT use or store the unit in an area or environment with high temperature.
• Should fluid from inside of the unit come in contact with your skin or clothing, wash the
• In a storm, unplug the power cord from the socket.
• DO NOT charge the unit via power supply systems that operate outside of 100-24011.
• DO NOT place the unit on its side or upside down while in use or storage.

CAUTION
Noncompliance may lead to injuries and/or property damage-

• If rust, peculiar odors, overheating or other abnormal circumstances are observed, stop using the unit immediately and contact the dealer or our customer service center.
• The unit complies with all legal requirements for transport of dangerous goods.
• Make sure that the unit is properly secured when transporting it in a motor vehicle.
• Only charge, use and store the unit within an ambient temperature of o to 40 •c (32 -104 °F).
• Switch the unit off immediately if it has accidentally fallen, was dropped or was exposed to vibrations.
• Carefully read the instructions for the electric devices that you intend to connect to your power supply unit.
• Make sure that the device you are connecting is switched off before you connect it.

* Serious injuries include blindness, bums, electric shock, fractures, poisoning, etc., which can lead to complications, hospitalization or permanent treatment.
** Injuries include burns, electric shock, etc., which do not lead to hospitalization or permanent treatment.
*** Property damage: includes buildings, belongings and pets, etc.

ATTENTION

DISCLAIMER

• Our company cannot be held liable for damages caused by fire, earthquake, use by a third party, other accidents, intentional misconduct on the part of the customer, abuse or other abnormal conditions.
• Do not repair any damage to the AC plug or power supply on your own.
• The warranty covers all terms and conditions of the warranty. Contents that are not specified in the warranty terms and conditions are beyond our responsibility.
• Our company assumes no liability for damages caused by incorrect use or non-compliance with this instruction manual.

Intended use: The HLS 200 portable power unit is intended as a power supply for electronic devices with a maximum power consumption of 100 W. Our product is not suitable to be used with equipment that relates to one’s own personal safety and relies heavily on electricity, such as medical devices, equipment for nuclear facilities, the manufacture of air and spacecraft, etc. We therefore assume no liability for accidents involving personal safety, fires, or machine failures caused by using our product with the aforementioned devices.

This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions:
(1) This device may not cause harmful interference, and
(2) this device must accept any interference received, including interference that may cause undesired operation.

WARRANTY

Limited Warranty
Jackery Inc. warrants to the original consumer purchaser that the Jackery product will be free from defects in workmanship and material under normal consumer use during the applicable warranty period identified in the ‘Warranty Period’ section below, subject to the exclusions set forth below. This warranty statement sets forth Jackery’s total and exclusive warranty obligation. We will not assume, nor authorize any person to assume for us, any other liability in connection with the sale of our products.

Warranty Period
The warranty period is 24 months. In each case, the warranty period is measured starting on the date of purchase by the original consumer purchaser. The sales receipt from the first consumer purchase, or other reasonable documentary proof, is required in order to establish the start date of the warranty period.

Remedy
Jackery will repair or replace (at Jackery’s option) any Jackery product that fails to operate during the applicable warranty period due to defect in workmanship or material. If a valid claim is made during the applicable period, Jackery, at its option, will either (1) replace the product, or (2) exchange the product with a product that is of equal value. A replacement product assumes the remaining warranty of the original product or ninety (90) days from the date of replacement, whichever is greater. Customer is responsible for the return shipping costs.

Limited to Original Consumer Buyer
The warranty on Jackery’s product is limited to the original consumer purchaser and to any subsequent owner.

Exclusions
Jackery’s warranty does not apply to (0 any product that is misused, abused, modified, damaged by accident, or used for anything other than normal consumer use as authorized in Jackery’ s current product literature, or (ii) any product purchased through an online auction house. Jackery’s warranty does not apply to the battery cell unless the battery cell is fully charged by you within seven days after you purchase the product and at least every 3 months thereafter.

How to Receive Service
To obtain warranty service, contact our customer service team at [email protected]

Honda Official Licensed Product. Designed, manufactured and distributed by or for Jackery, Inc. Honda, the “H” logo, Honda vehicles and their trade dress, and all associated vehicle emblems, logos, marks and names are trademarks and intellectual property of Honda Motor Co., Ltd. All rights reserved.
© Copyright 2018 Jackery Inc. All trademarks cited herein are the property of their respective owners.
The information contained herein is subject to change without notice. The only warranties for Jackery products and services are set forth in the warranty
statements accompanying such products and services. Jackery shall not be liable for technical or editorial errors or omissions contained herein.
First Edition: July 2018. Document Part Number: HLS200-UM-001

FAQs

What type of battery is in an HLS 200?
The HLS 200 contains a battery pack which consists of an array of cylindrical 18650 lithium battery cells with high energy density.

How do I know if my HLS 200 is charged?
To check the charge level of the HLS 200, refer to the LCD Battery Display.

Can I charge the HLS 200 while supplying power at the same time?
For AC output and USB output, the HLS 200 supports pass through charging. It will charge connected devices, while also being charged, but not the DC output.

How do I know if my device will work with the HLS 200?
You will need to check the amount of power your device requires. This may require some research on your end. An online search or examining the user guide for your device should suffice. To be compatible with the HLS 200 you should use devices that require less than 100 W.

CONTACT US