EVISTR L157 Voice Recorder User Manual

EVISTR L157 Voice Recorder

   SAVE

Turn ON

 Press REC, start to record

SAVE

         Press STOP, save recording

PLAY

      Press PLAY, play the file just saved

Fast Forward/Volume Adjust

MUSIC/RECORD Folder Switch

Press and hold STOP button,
switch between MUSIC and RECORD folder

Connect to Earphone

Delete File

Data Transfer

Menu Options

Charging

Important Notice:

1. Set time and date: by pressing UP/DOWN to adjust, by tapping VOL+ to select, and tap the M button to confirm setting
2. Restore to Factory Setting: turn on the device, Press Play (turn on device) -> hit M -> use Up/Down to System Settings -> hit M -> to Factory Setting, hit M -> Select Yes, hit M to confirm Restores to factory default. Very helpful if confusion arises when creating settings.
3. Format Device: will erase all data, do not use it, unless in need.
   Note: Do not turn off power when formatting device. If, unfortunately, the devise is mistakenly cut off, it will show as disk error. To correct disk error. Push down the power button from ON to OFF position. Connect the device to a Windows computer, and format the disk from the computer to return to normal state.
   Note: If you are using a MAC computer, please contact our customer support. Reformatting on a MAC computer needs different options.
4. Unless storing the device, we recommend you keep power button at ON position, turn on/ off the device by pressing down the PLAY button.

Register VIP: http://www.evistr.com/vip or email [email protected] to register VIP within 30days and receive an extended 18 Month Product Warranty.
Download More User Guide from http://www.evistr.com

EVISTR L157 User Manual

Thank you for purchasing a recorder from EVISTR. Customer satisfaction is our priority. If you have questions or problems, please feel free to contact to us.
– Our web site: http://www.evistr.com
– Register as a VIP and receive an extended 18 month warranty: www.evistr.com/vip
– Our customer support email: [email protected]
– Keep this booklet for future reference. You may also download detailed instructions from our web site. http://www.evistr.com To Ensure Product Warranty Confirm the package contains an authentic,
new device from EVISTR. The original package comes film wrapped and has bar code information.

·1 x L157 Device
·1 x Earphone
·1 x USB Cable (for data transfer and charging)
·1 x VIP Card
We highly recommend you register at our site to receive an extended warranty (18months), to verify the product authentication, and to have better customer service. Registration is free.

Register VIP: http://www.evistr.com/vip or email [email protected] to register VIP and receive an extended 18 Month Product Warranty.

Product Warranty

1. year warranty unless registered with Evistr VIP

Product Sketch

Learn how to operate the buttons in the product sketch.
Built-in Mic: Captures the voice and records. Do not click on buttons when device is recording. Earphone: You may plug in earphones to hear the playback.
USB: For charging or to download recordings to a computer. POWER Button: Switch on/off device power (we recommend you keep power button at ON position unless storing the device). PLAY/PAUSE: Play recordings or turn on/off the device (while power button is at the ON position). REC: Button for recording. STOP: Save recording, stop playback。 M: Menu options. Use up/down to select, use M to
confirm. Press Stop to return to main menu Speaker: Device has a built-in speaker. You can hear the playback without earphones. UP/DOWN: Selects Menu Options. VOL+ / VOL- : Adjusts the speaker volume. When
setting date and time, use this button.

1. Battery Bar (when battery bar is empty, battery needs recharging)
2. Length of Recording in minutes/seconds
3. Speaker Volume
4. Recording format & bit rate
5. Remaining Recording Time (remaining capacity)
6. Recording Status
7. L / R Channel meter
8. Total Recording File Count

Quick Start Guide

Turn ON device: Power button to ON position; press PLAY button for two seconds to turn on the device. Recording: press REC button to begin recording.
Save Recording: press STOP button to save

recording
Delete Recording: press Menu button. Select -> Delete File -> select Delete. This deletes a single recording. To delete all files, go to -> Delete File -> Use Up/Down button to choose Delete All. Use
Up/Down button to confirm your choice. Play a Recording: Choose the recording you wish to hear by pressing Menu -> use Up/Down button to choose, press PLAY. Play Next / Previous Recording: press the
Up/Down button. Fast Forward / Rewind: press and hold the Up(REW)/Down(FF) button.

Quick Menu Option Guide Using UP /Down Button

To select and confirm, press Menu (M) button. Change Record Format/Quality: go to Menu (M) -> Up/Down button to select Record Setting -> Recording quality -> (1536kpbs WAV format, 128kpbs / 64kpbs
MP3 format) Voice Activated Mode (AVR mode): go to Menu (M) -> select Record Setting -> Up/Down button to Voice-activated mode-> M button to select AVR mode -> select ON.
Voice Activated Level: go to Menu (M) -> Up/Down button to select Record Setting -> select Voice activated

sensitivity -> select from levels 1 to 5. Set Time: go to Menu (M) -> Up/Down button to select System setting -> Up/Down button to select Date and time -> select Set time -> use Up/Down and VOL+ buttons to change time. Press M button to confirm. Set Date: go to Menu (M) -> Up/Down button to select System setting -> Up/Down button to select Date and time -> select Date -> with Up/Down and
VOL+ buttons change date, and press M button to confirm.

DOs
·When you receive the recorder, we recommend that you push the POWER button up to the ON position to turn on the device. Unless storing the device, we recommend you turn on/ off the device by pressing
down the PLAY button. Listen to a test file on the device to check sound levels. ·Backup data as frequently as possible. ·Charge the device via its USB cable to a computer or wall charger (charger input less than 5V 1A).
·When battery is low (battery bar empty), save recordings and recharge immediately.

• The device supports charging and recording at the same time.
• Remember to hit STOP and save your recording each time.
• Device won’t make any noise during recording. It will flash the Record LED light (this function can be turned off).
• Keep this booklet for future reference.
• For any issues, problems, or questions, contact us [email protected]
• Contact customer service with Order ID or System Firmware Version Information, or Bar Code on the package for a more effective reply.
• Register for VIP service within 30 days to receive effective customer service and extend your recorder’s warranty to 18months.

DON’Ts

• Do not shut down the device’s power button when it is saving a recording.
• Do not scratch the recorder body.
• If typing or writing near the device while record function is on, it will capture the noise.
• Do not format the device unless the files have been backed up.
• Do not cut off power while formatting device.
• Do not delete a file unless the file has been backed up.
• Do not press any buttons when device is connected to a computer.
• Do not use non-original micro USB cable to transferdata from device to computer. Not all micro USB
• Do not use the Voice Activated Function unless needed. It may not record some low decibel voice you want recorded.
• Do not use the Auto Record Function unless needed, as device will automatically boot up to record.
• Do not turn on the sleeper time function unless needed, as this will force the device to shut down, even if in use.
• Do not pause the device for a long time, as the device will automatically shut down when there is no operation such as playing or recording.

Operational Explanations:

These instructions will say “hit” or “press down.”  Hit: a short press of the button. Press and hold: press the button a few seconds until
the screen shows the information.

Basic Operation Guide

1. Charging the device
   Use the USB cable provided. Connect to a computer, USB socket, or USB Adapter.
2. Download file to computer
   Use the USB cable provided to connect to your computer. Find the file (L157) on your computer. Drag & Drop or Copy and Paste the recordings from the recorder file to your computer and share with friends.
3. Turn on the recorder
   When using the device for the first time, push up the ON/OFF power button on the side of the recorder from OFF to ON position. The device will boot up.
   From then on, press PLAY button to turn ON/OFF the  recording device.
4. Recording
   Hit REC button to begin recording. Press STOP to automatically save recording.
5. Pause Recording
   During recording, hit PLAY button to pause recording. Hit PLAY button again to resume recording.
6. Play Recording
   Once you have saved a recording, hit PLAY button and play back what was just recorded.
7. Adjust Speaker Volume
   During playback, use VOL+ / VOL- to adjust speaker
   volume.
8. Fast Forward / Rewind During playback, press and hold Down (FF) to use fast forward. During playback, press and hold Up (REW) to rewind.
9. Previous / Next
   Tap UP or DOWN to select, move to previous / next recording file (or music track).
10. Play Music (use as MP3 Player)
    Attach device to computer. Transfer music file from computer to recorder. Detach device from computer and turn on. Press down STOP button and switch to music folder. Note: the songs do not put inside the RECORD folder, you could create a new folder for it.
11. Delete Recording
    Turn on the device by pressing Play. Press M (menu)-> find Delete File, press M again -> select Delete ,press M -> select Yes, press M to confirm. File deletes. NOTE: When turning on the device, we can press
    Up/Down button to select file to Delete, in default, it reads the latest file, so if we will directly go to delete option, it will delete the latest file.
12.  A-B Repeat
    When in playback, press down M button. A will flash on the display. Press down M button again, and it will show A-B on the display. The recorder will play back recordings / music from point A to point B again and
    again.
13.  T-mark
    During recording, press M button to add a T-mark to the recording. A T-mark flag shows on the display. It is same as adding a bookmark. Each recording file can have ten T-marks at maximum.
    If recording is played back, you will see the T-mark flag on the display. Press DOWN (FF) to jump to the next T-mark file point

Menu Options

1.Play Settings
1.1Play Settings -> Play Mode
Press Play (turn on device)-> tap M -> use Up/Down to Play Setting -> Play mode. Use Up/Down to select Repeat. Repeat off: select and confirm. Device playback is in normal. Repeat one: repeats single file again and again. Repeat all: repeats all files in directory from A-Z again and again. View Playing: only play 10s seconds of each file. Use up/down to select Shuffle. Shuffle plays back files in random order. To stop

1.2 Play Settings -> Sound Setting
Press Play (turn on device) -> tap M -> use Up/Down to Play Setting -> Sound Setting -> Equalizer. Use Up/Down to select Rock, Pop, Soft, Jazz, Classical, Techno, Off.
2.Folder View
Press Play (turn on device) -> hit M -> use Up/Down to Folder View -> RECORD. Shows all files recorded on device.

3.Record Settings
Press Play (turn on device) -> hit M -> use Up/Down to Record Settings -> hit M Recording Quality: 1536Kpbs: default choice, lossless PCM quality, recording format at WAV (12 hours at 8GB, 24 hours at 16GB); 128Kpbs, 64Kpbs: record at MP3 format. Record LED: ON: default. LED indicator light is ON. OFF: turn off the LED indicator light. Subsection record Recorder will automatically save the recording file at a
selected time length and start a new recording. Half Hour: record each file at 30minutes. One Hour: record each file at 1 hour. Two Hour: record each file at 2 hour. CLOSE: turn off subsection record function

Voice Activated Mode (AVR)
When AVR is on, device will record any voice. If no voice is detected, it will not record to reduce blank time and save storage space. At AVR mode, we still need to press STOP to save recordings when we complete a recording task.

AVR Mode
ON: turn on voice activated record function. OFF: turn off voice activated record function.

Voice Activated Sensitive Level
From Level 1 to Level 5: Level 1 only picks up voice or sound above 70db, a very loud sound. Level 5 is very sensitive, so any quiet sound will be recorded.

(i.e. normal environmental noise will activate recording).
Note: do not turn on this function for important lectures or meetings. It may skip or lose some very important sentences at low decibels. Use regular on/record/stop for meetings.

Record Monitor
ON: when ON, use earphones to hear what it is recording. OFF: turn off this function. Exit:Exit current menu options, return to upper level menu option. 4.System Settings

Menu Options -> Up/Down button -> System Settings

Sleep Timer:
This function will turn off the device at a set time, even if it is playing or recording. Be careful in case you unexpectedly lose an important recording.
Select from 10 minutes to a maximum of 120 minutes.

Backlight timer:
Set the time for the display to go dark. Select from 10 seconds to maximum (always on).
Note: when display is always on, device will consume a lot of battery power.

Brightness:
Set the display brightness from 00 to 15 (i.e. dark to bright)

Date and time:
Set time: Press UP/DOWN to adjust hour or minute. Press VOL+/VOL- to move to next hour or time. Press M to confirm and save setting. Set date: Press UP/DOWN to adjust year, month, or
day. Press VOL+/VOL- to move to next. Press M to confirm and save setting. Language: If, unfortunately, the device is set to the wrong language, please contact customer service.
[email protected].

Information
Player Information: Device shows the firmware version and the release date. Disk space: Device shows the free space and total
space. Format Device:b This will format the disk and erase all data on the device, so remember to back up important files before doing. Select Yes, press M (menu) confirm. Device will start to reformat and erase all data. Wait until the device reboots and completes the process.
Note: Do not turn off power when formatting device. If, unfortunately, the devise is mistakenly cut off, it will show as disk error. To correct disk error.
Push down the power button from ON to OFF position. Connect the device to a Windows computer, and format the disk from the computer to return to normal state.
Note: If you are using a MAC computer, please contact our customer support. Reformatting on a MAC computer needs different options. Factory Setting: Restores to factory default. Very helpful if confusion
arises when creating settings. Select Yes, press M to confirm. Device will start to restore factory settings To restore button function, press M and hold. Device will exit connection mode.

8)Cannot Find My Recordings in the Recorder
When first opened, the device will first read the Music Folder. Press STOP to switch back to recordings folder. The recorder can also be connected back to the computer to check whether there are recordings in the
recorder disk.

9)Turn On Voice Activated Function
Go to Menu -> Up/Down button to Record Setting -> press M -> Up/Down to Voice Activated Setting -> press M -> select AVR mode, and press M to confirm.
Now press REC. You will see VOR on the screen which means voice activated recording function is set.

10)How to Use the AVR Mode (Voice Activated
Function) When AVR mode is selected, the device will only pick up a loud enough decibel sound or voice. Adjust the voice activated sensitivity in record setting. Select the AVR level to get the best effect for voice
activated recording. For the L157 voice recorder, the AVR level can be selected from 1 -5. The lower number requires a higher decibel voice to activate the recorder. In other words, a louder voice. At level 5, the recorder is very sensitive and will pick up quiet speaking.

Note: When the voice activated function is ON, press REC. Device will record 3 seconds to check if the recorder is correctly entered into recording mode. It will only pick up loud enough decibels of voice /
sound

(11) Recorder Not Recording
Check to see if the recording light is blinking. Additionally, see if VOR is on the screen. If VOR is on the screen and light is blinking, it means the voice activated function is ON. During this setting,
it will only record when a high enough decibel sound is detected. You may go to Record Setting, find AVR sensitivity, and adjust. Turn off the AVR mode if this function is not needed

(12) Why Does Recorder Playback in Random?
Go to Play setting, close the shuffle function.

(13) How to Use the A-B Repeat Function
During playback, press down M (menu). A appears on the screen and B blinks. Recorder selected the start point. Press down M again, select B. Now recorder will playback between Point A to B.

(14) The Recording Has Unwanted Noise
Avoid recording near a computer, electric fan, air conditioner, or sound bar that will cause noise. The recorder will pick up this static noise.

(15) The Recorder Auto Shuts Down While
Recording This happens when the sleeper time function is ON. When operating the device, or recording, or playing music/recordings, the sleep timer function will force a shut down on the device.
Go to System setting – > sleeper time. Select OFF and confirm. This closes the sleep time function. You can also try to restore the recorder to factory settings when this happens if you’re not sure how to set
the sleep time.

(16) Cannot Shut Off My Voice Recorder
When the recorder is charging, or connected to computer, even if the POWER BUTTON ON/OFF is at OFF position, recorder will still be ON. The voice recorder cannot be shut off because the voice recorder
is directly getting power from the charging socket or computer.

(17) How to format the recorder
Press M (menu), enter menu options. Select System Setting, press M to enter. Select Format Device, Press M to enter. Enter Format Disk, select Yes. Press M to confirm and start formatting. After formatting
is completed, all files on the recorder will be deleted, and all storage (8GB or 16GB storage) will be available on voice recorder again.
Note: Do not shut off the device during disk format

(18) Space is full
When the storage space is full, connect to a computer, copy recordings, and save them to the computer. Delete all the recordings from the voice recorder. The voice recorder has a limited storage at 8GB or 16GB. After a while of using, the recorder may be full and needs to be backed up onto a computer. Note: Do not cut off recordings from recorder to computer. This will cause an unsuccessful transfer, and the files cannot be deleted from the recorder successfully

We will regularly update our E-book, based on customer feedback. We hope to have more interaction with our customers, so please let us know if we can help you. You may find more information on
our website:
http://evistr.com/[email protected]

Digital Voice Recorder

L36 User Manual

Confirm the package contains an authentic, new device from EVISTR. The original package comes film wrapped and has bar code information.

Package List

1 x L36 Device
1 x Earphone
1 x LINE IN Cable
1 x External Microphone
1 x USB Cable (for data transfer and charging)
1 x VIP Card

Product Warranty

1 year warranty unless registered with VIP.

How to Insert TF Card

1. Check the TF card direction, correct direction like picture shows

2. insert the TF card softly, push it in, the card will locked in the device

3. Push the TF card, the card will jump out 5

Product Sketch

Learn how to operate the buttons in the product sketch.
Built-in Mic: Captures the voice and records. Do not click on buttons when device is recording.
Earphone: You may plug in earphones to hear the playback.
LINE-IN: Connect for LINE IN cable / external microphone
USB: For charging or to download recordings to a c o m p u t e r. PLAY/PAUSE: Play recordings or turn on/off the device
REC: Button for recording.
STOP: Save recording, stop playback.
M: Menu options. Use up/down to select, use PLAY to confirm. Press Stop to return to main menu UP/DOWN (+/-): Selects Menu Options. Adjust speaker volume when playback. Speaker: Device has a built-in speaker. You can hear the playback without earphones. REW/FF : Selects left/right, hold it for rewind / fast forward when playback RESET: when device in error status, push RESET button quick to fix it

NO. Function

1 Battery Bar (when battery bar is empty, battery needs recharging)
2 Length of Recording in minutes/seconds
3 Recording format & bit rate
4 Remaining Recording Time (remaining capacity)
5 Recording Status
6 L / R Channel meter
7 Total Recording File Count

Quick Start Guide

Turn ON device: Press PLAY button for two seconds to turn on the device.
Recording: press REC button to begin recording.
Save Recording: press STOP button to save recording
Delete Recording: press Menu button. Select -> Delete -> select Delete One. This deletes a single recording. To delete all files,Use +/- button to choose Delete All -> Select Yes -> Use PLAY button to confirm your choice. QUICK Delete: by pressing PLAY button turn on the device, press REW/FF button to select a recording, and then press the DEL button at device’s right side, quickly delete the selected recording, or delete All recordings. Play a Recording: by pressing PLAY button turn on the device, press REW/FF button to choose the recording you wish to hear -> press PLAY.
Play Next / Previous Recording: press the REW/FF button. Fast Forward / Rewind: press and hold the REW/FF button.

Important Notice for Using This Device

DOs

• Listen to a test file on the device to check sound levels.
• Backup data as frequently as possible.
• Charge the device via its USB cable to a computer or wall
• charger (charger input less than 5V 1A).
• When battery is low (battery bar empty), save recordings and recharge immediately.
• The device supports charging and recording at the same time.
• Remember to hit STOP and save your recording each time.
• Device won’t make any noise during recording. It will flash the Record LED light (this function can be turned off). Keep this booklet for future reference.
• For any issues, problems, or questions, contact us [email protected]
• Contact customer service with Order ID or System Firmware Version Information, or Bar Code on the package for a more effective reply.
• Register for VIP service within 30 days to receive effective customer service and extend your recorder’s warranty to 18 months.

DON’Ts

• Do not scratch the recorder body.
• If typing or writing near the device while record function is on, it will capture the noise.
• Do not format the device unless the files have been backed up.
• Do not delete a file unless the file has been backed up.
• Do not press any buttons when device is connected to a computer.
• Do not use non-original micro USB cable to transfer data from device to computer. Not all micro USB cables support data transfer.
• Do not use the Voice Activated Function unless needed. It may not record some low decibel voice you want recorded.
• Do not pause the device for a long time, as the device will automatically shut down when there is no operation such as playing or recording.

Operational Explanations:

These instructions will say “hit” or “press and hold.” Hit: a short press of the button. Press and hold: press the button a few seconds until the screen shows the information.

Basic Operation Guide

1)Charging the device Use the USB cable provided. Connect to a computer, USB socket, or USB Adapter. The battery can be fully charged in 3
(3) hours, single full charge can work up to 70 hours.

2) Download file to computer

Use the USB cable provided to connect to your computer. Find the file (L36) on your computer. Drag & Drop or Copy and Paste the recordings from the recorder file to your computer and share with friends.

3) Turn on the recorder Press PLAY button to turn ON/OFF the recording device.

4) Recording Hit REC button to begin recording. Press STOP to automatically save recording.

5) Pause / Resume Recording During recording, hit PLAY button to pause recording. Hit PLAY button again to resume recording.

6) Play Recording Once you have saved a recording, hit PLAY button and play back what was just recorded.

7) Adjust Speaker Volume During playback, use + / – to adjust speaker volume.

8) Fast Forward / Rewind During playback, press and hold FF to use fast forward. During playback, press and hold REW to rewind.

9) Previous / Next Tap REW or FF to select, move to previous / next recording file (or music track).
10) Play Music (use as MP3 Player) Attach device to computer. Transfer music file from computer to recorder.

11) Delete Recording Turn on the device by pressing Play. Press REW/FF to select a file to delete -> press DEL button, directly enter delete option

Detach device from computer and turn on. Press down MENU button and switch to music folder. Note: the songs do not put inside the RECORD folder, you could create a new folder for it.

NOTE: When turning on the device, we can press REW / FF button to select file to Delete, in default, it reads the latest file, so if we will directly go to delete option, it will delete the latest file.

Menu Options

The PLAY button works as OK/Confirm in menu options

1.Save Position Press Play (turn on device)-> tap M -> Save Position -> Hit PLAY Use +/- to select save position, TF (need insert TF card), Flash (built-in storage) Note: press PLAY to confirm selection, if we didn’t insert TF card correctly, when selected at TF, it will show “removed TF card”
2.Record Settings Press Play (turn on device) -> hit M -> use +/- to Record Settings -> hit PLAY
15
2.1 Recordings library Shows all files recorded on device.
2.2 Record Format We could choose to record at WAV or MP3 format
2.3 Set rec bit rate Below the bit rate chat

2.4 AVR Mode AVR Switch: turn on / off Activated Voice Record Mode AVR Level: select the voice activated recorder sensitivity level At AVR mode, we still need to press STOP to save recordings when we complete a recording task. Voice Activated Sensitive Level From Level 1 to Level 5: Level 1 only picks up voice or sound above 70db, a very loud sound. Level 5 is very sensitive, so any quiet sound will be recorded. (i.e. normal environmental noise will activate recording).

Note: do not turn on this function for important lectures or meetings. It may skip or lose some very important sentences at low decibels. Use regular on/record/stop for meetings.

2.5 Record LED ON: default. LED indicator light is ON. OFF: turn off the LED indicator light.
2.6 Noise Cancellation OFF: default. When it is ON, it could help to reduce noise interference. Note: when noise cancellation is ON, it will record at mono
2.7 Record Monitor OFF: default. When it is ON, use earphones to hear what it is recording.
3.Play Settings Press Play (turn on device)-> tap M -> use +/- to Play Setting -> hit PLAY Use +/- to select Repeat. Repeat one: repeats single file again and again. Repeat all: repeats all files in directory from A-Z again and again. Shuffle: plays back files in random order. To stop shuffle, select at repeat one or repeat all

4.Variable Playback Speed Press Play (turn on device) -> hit M -> use +/- to Variable Playback Speed -> hit PLAY Use +/- to adjust playback speed from -8 to +8; the normal speed is 0, remember to press PLAY confirm settings

5.System Settings Press Play (turn on device) -> hit M -> use +/- to System Set > hit PLAY Language: English default. We could select for other language of the device. If, unfortunately, the device is set to the wrong language, please contact customer service. [email protected]. Date and time: Time settings: Set time format: we can set at 12/24 Set Time: press +/- to adjust hour, minute. Press REW/FF to move to next Press PLAY to confirm and finish setting Date Settings: Set date format: we can set at 3 different date display style Set date: Press +/- to adjust year, month, or day. Press REW/FF to move to next. Press M to confirm and save setting. Password Set: Password switch: OFF default. When turn it on, we need to set password for the device Password set: input a 6 digits password. Press +/- to set the numbers. Press REW/FF to move to next. Note 1.If forgot password, please enter 18 18 18, and then hold STOP button more than 3 seconds to reset the device 2.If password function is ON, when connect to computer, we need to input correct password, otherwise, it will fail connect to computer Player Information: Device shows the firmware version and the release date. Disk space: Device shows the free space and total space. Format Device: This will format the disk and erase all data on the device, so remember to back up important files before doing. Select Yes, press PLAY confirm. Device will start to reformat and erase all data. Wait until the device reboots and completes the process. Note: Do not turn off power when formatting device. If, unfortunately, the devise is mistakenly cut off, it will show as disk error. To correct disk error. Push down the power button from ON to OFF position. Connect the device to a Windows computer, and format the disk from the computer to return to normal state.

Note: If you are using a MAC computer, please contact our customer support. Reformatting on a MAC computer needs different options. Factory Setting: Restores to factory default. Very helpful if confusion arises when creating settings. Select Yes, press PLAY to confirm. Device will start to restore factory settings.

Recording Parameter

Note: This form shows the maximum recording file time that can be stored in the device, not the battery time, Device capacity is subject to the entity.

Recording Parameter

Frequently Asked Question

1. Device Frozen When device was frozen, we can push the RESET button to reset the device, it will not delete files on device
2. Restore to Factory Setting Restore to factory setting, very helpful if confusions arises when creating settings
3. Format Device Format device, it will delete all data on the device. Device also can format on Windows computer or MAC computer. If format on MAC computer, Contact customer service [email protected] to get tutorials
4. Forgot Password If forgot password, enter 18 18 18 and hold the STOP button 3 seconds.
5. Failed connect to computer Need using the original USB cable. If failed connecting to computer, we could try below solutions or contact customer service [email protected] A. If set password, need enter correct password when connecting to computer B. If cable damaged, try with android phone cable C. Computer socket loose, try with another socket D. Computer didn’t connect to internet, for some computer, they need use internet to recognize the device, so just reboot computer and connect device again E. Don’t press buttons when connecting to computer, in case of entering charging only mode F. Don’t interrupt connection unexpectedly, in case of file lost or damaged