Overview

Dimension

HOW TO REPLACE THE BULB:
PLEASE TAKE THE LOWER FRAME OFF THE UPPER FRAME TO CHANGE THE BULB.

Safety Instruction

All electrical components must be installed by a licensed electrician in accordance with the National Electric Code and the appropriate local electrical codes.	You will need 3-Medium Base Bulb 40 Watts Frosted bulb Recommended 60 Watts Max. USE LED BULBS FOR EXTENDED USE This fixture is Dry rated.

How To Install

1. Install the mounting screws into the matching holes in the mounting bar.
   Secure the mounting bar to the outlet box with the outlet box screws.
2. Raise ceiling pan and upper frame allowing the mounting screws to protrude through the holes in the ceiling pan, and secure with the ball nut.
3. Install the bulbs(not included) into the socket.
4. Slide the glass diffuser into the bottom of the lower frame.
5. Slide the fabric shade inside the lower frame and secure it with clips.
6. Raise the lower frame up and hang it onto the ring on the bottom of the upper frame.
   NOTE: HIDE THE SEAMS OF THE SHADE BY ALIGNING IT WITH A VERTICAL METAL BAR.

WARNING:
This product can expose you to Lead which is known to the state of California to cause cancer and/or birth defects or reproductive harm.
For more information go to: www.P65Warnings.ca.gov

Part Number

• A. (1)-Mounting hardware
• B. (1)-Ceiling pan W5’’xH1’’
• C. (2)-Ball nut #XRF400PNBANUT
• D. (1)-Upper frame
• E. (1)-Fabric shade W16-1/4’’XH6-1/2’’ #XRF400SHA16.25IN
• F. (1)-Glass diffuser #XRF400DIF16.375IN
• G. (1)-Lower frame

CUSTOMER SUPPORT

Scan Me

Crystorama.com

Product Information

The DEL-90803-AG is a chandelier model from Crystorama that has
been designed to provide lighting for your space. It comes with a
set of crystals and a fabric shade that adds elegance to your home
decor. The fixture is dry rated, and it requires a Candelabra Base
Bulb of 40 Watts (recommended) or 60 Watts (maximum). The product
is packaged with all the necessary parts required for installation,
and it must be assembled as per the instructions provided in the
user manual.

Product Usage Instructions

Before installing the fixture, place all parts on a soft
cloth-covered platform to avoid damage. The following instructions
are provided for hanging and ceiling installation:

Hanging Installation

1. Screw the loop onto the top of the shade and install the
   mounting plate onto the outlet box.
2. Decide on the desired hanging height and adjust the chain to
   the correct length.
3. Raise the fixture up and do the wire connection. Attach the
   canopy over the mounting plate and secure it with ball nuts.
4. Dress the crystals as illustrated in the user manual.

Ceiling Installation

1. Install the mounting plate onto the outlet box.
2. Remove the loop from the ceiling canopy.
3. Screw the coupling onto the top of the shade. Place the spacer
   over the shade by aligning the slots on it with the shade spoke.
   Place the canopy over the top of the spacer and secure it with a
   hex nut.
4. Dress the crystals as illustrated in the user manual.

Note: All electrical components must be installed by a licensed
electrician in accordance with the National Electric Code and the
appropriate local electrical codes. The product can expose you to
lead, which is known to the State of California to cause cancer
and/or birth defects or reproductive harm. For more information, go
to www.p65warnings.ca.gov.

View Fullscreen

LIGHTING THE WAY FOR SIXTY YEARS
ASSEMBLY INSTRUCTION MODEL #DEL-90803-AG

Crystorama.com
WARNING:

90 1/2″ 6″
16 1/2″
A
B C

E
D
15 3/4″

15 3/4″
6″ 16 1/2″
A E
B C D
Outlet Box
Bulb not included.

Electrical Danger Turn Power Off
All electrical components must be
installed by a licensed electrician
in accordance with the National
Electric Code and the appropriate
local electrical codes
You will need 3- Candelabra Base Bulb 40 Watts recommended 60 Watts Max.
USE LED BULBS FOR EXTENDED USE
The fixture is Dry rated
HOW TO INSTALL:
Place the fixture parts on a soft cloth-covered platform before installation of fixture.
For Hanging:
1. Screw the loop onto the top of shade. Install the mounting plate onto the outlet box.
2. Decide the desired hanging height and adjust the chain to the correct length.
3. Raise the fixture up and do the wire connection. Attach the canopy over the mounting plate and secure with ball nuts.
4. Dress the crystals as illustrated.
For Ceiling:
1. Install the mounting plate onto the outlet box.
2. Remove the loop from the ceiling canopy.
3. Screw the coupling onto the top of shade. place the spacer over the shade by aligning the slots on it with the shade spoke. Place the canopy over the top of the spacer and and secure with the hex nut.
4. Dress the crystals as illustrated.

Crystal Sets
A. 3 Sets. (2)14mm B. 3 Sets. 280mm long bead string–(10mm bead*18pcs) C. 3 Sets. 330mm long bead string–(10mm bead*21pcs) D. 1 Piece. (1)AS8-40mm Ball E. 1 Piece. 260mm long bead string–(10mm bead*17pcs)

WARNING:This product can expose you to Lead,
which is known to the State of California to cause cancer and/or birth defects or reproductive harm.For more
information go to www.p65warnings.ca.gov

LIGHTING THE WAY FOR SIXTY YEARS
ASSEMBLY INSTRUCTION MODEL #DEL-90803-AG

Crystorama.com

Outlet Box Part Number

D E

F

H

J

I

L

A
B C
G
Bulb not included.
K

Part Numbers-For Hanging
A. (1)Mounting hardware Wire Connector x 2. Mounting plate x 1. Machine screw x 2. Mounting screw x 2. Lock washer x 1. Hex nut x 1. Nipple x 1.
B. (1)-Canopy (W5″xH1 1/4″) -XSN9083AGCAN5.11IN
C. (2)-Ball Nut D. (1)-Loop
E. (1)-Chain (4mmx72″) -XSN90803AGCHA4MM
F. (1)-Fixture Loop
G. (1)-Frame
H. (1)-Distributor Box
I. (1)-Center Finial
J. (1)-Fabric Shade; W15.75″,H6″ -XSN90803AGSHA15.75IN
K. (3)-Candle Sleeve; W7/8″,H3 1/4″ -XSN90802AGCDL3.23IN
L. (3)-Crystal Bobeche; Ø2 3/8″,H3/8″; 23mm center hole. -XSN90802BOB2.4IN

Outlet Box
A

Part Number
Part Numbers-Conversion kit For Ceiling
M. (1)-Coupling N. (1)-Thread nipple O. (1)-Metal spacer ; H2″,with 3 slots

O

M

N

Bulb not included.

WARNING:

Electrical Danger

Turn Power Off

All electrical components must be installed by a licensed electrician in accordance with the National Electric Code and the appropriate local electrical codes.

You will need 3- Candelabra Base Bulb 40 Watts recommended 60 Watts Max. USE LED BULBS FOR EXTENDED USE

The fixture is Dry rated

HOW TO INSTALL

Place the fixture parts on a soft cloth-covered platform before installation of fixture.

For Hanging

1. Place the fabric shade over the threaded nipple on the top of fixture body and secure with the fixture loop.
2. Install the mounting plate onto the outlet box.
3. Decide the desired hanging height and adjust the chain to the correct length.
4. Raise the fixture up and do the wire connection. Attach the canopy over the mounting plate and secure with ball nuts.
5. Dress the crystals as illustrated.

For Ceiling

1. Install the mounting plate onto the outlet box.
2. Remove the fixture loop from the fixture body and the loop from the ceiling canopy.
3. Place the shade over the threaded nipple on the top of fixture body and secure it with the coupling. Screw the threaded nipple onto the coupling and place the spacer over the shade by aligning the slots on it with the shade spoke. Place the canopy over the top of the spacer and secure with the hex nut.
4. Dress the crystals as illustrated.

Dimensions

WARNING: This product can expose you to Lead, which is known to the State of California to cause cancer and/or birth defects or reproductive harm. For more information go to www.p65warnings.ca.gov

Crystal Sets

A. 3 Sets. (2)14mm
B. 3 Sets. (19)10mm Round Ball
C. 3 Sets. (22)10mm Round Ball
D. 1 Piece. (1)AS8-40mm Ball
E. 1 Piece. (19)10mm Round Ball

Part Number

Part Numbers-For Hanging

A. (2)-Wire Connector
B. (1)-Mounting Plate
C. (2)-Machine Screw
D. (1)-Canopy (W5″xH1 1/4″) -XSN9083AGCAN5.11IN
E. (2)-Ball Nut
F. (1)-Loop
G. (1)-Chain (4mmx72″) -XSN90803AGCHA4MM
H. (1)-Fixture Loop
I. (1)-Frame
J. (1)-Distributor Box
K. (1)-Center Finial
L. (1)-Fabric Shade; W15.75″,H6″ -XSN90803AGSHA15.75IN
M. (3)-Candle Sleeve; W7/8″,H3 1/4″ -XSN90802AGCDL3.23IN
N. (3)-Crystal Bobeche; Ø2 3/8″,H3/8″; 23mm center hole. -XSN90802BOB2.4IN

Part Numbers-Conversion kit For Ceiling

O. (1)-Coupling
P. (1)-Thread nipple
Q. (1)-Metal spacer ; H2″,with 3 slots
R. (1)-Hex Nut

Crystorama.com