CREASEE 3D Printer Instruction Manual

1. PACKING LIST / CS 30

2. PART NAME

3. 3-STEP QUICK INSTALLATION

4. BOOT CHECKING

5. HEAT-BDE PLATFORM LEVELING

According to the method shown in the figure above: After the installation, choose the solid glue as a reference to make sure the X axis is parallel to the bottom (H left = H right) through adjusting the coupling the ABCD four points are respectively adjusted, the height from the platform to the nozzle is adjusted, and the height is about 0.2mm.

1. Home
2. After each axis returns to the origin: Motor-off
3. According to the method shown in the above figure, adjust the height of ABCD four points to the nozzle in order to be about 0.2mm.

6. LOADING FILAMENT

1. Move-Z+: 10mm.
2. First ensure that the white Teflon tube is inserted to the bottom (The black marking and the white pneumatic connectors are tightly attached)
3. Heat the nozzle temperature to 200 °C Preheat-Extrusion: 200°C;
4. After the temperature is heated to 200 °C Insert the filament to the extruder according to the methods showing in the left photos until the nozzle spins normaly.
5. Test whether the extruder works properly Extrusion 1-In: 5mm

7. FIRST-TIME PRINT

1. Insert SD card
2. Turn on the power
3. Select the document to print (Printing-CS30 -Confirm)

Make life full of fun

DONGGUAN CREASEE TECHNOLOGY CO.,LTD

Add:Room 301,3F, Building 1, No. 10, Hupan Street, Tangxia Town, Dongguan City

Mob: +86 1987 987 4418

Web: http://www.creasee.com

Whats app: 19879874418

When you receive the product, you can contact us, and we will help you to activate the one-year extended guarantee service;