Comsol Model: AP22 Series 2200mAh Power Bank User Manual

v1.5

Power Bank Layout

Suitable for

• iPhone/iPod
• Most smartphones including Samsung, LG, Sony, HTC, Nokia, Microsoft, Huawei, Motorola, Google, OnePlus, Oppo & more
• Smartwatches, fitness trackers, digital cameras, portable gaming consoles, eReaders and drones
• Bluetooth devices such as speakers, headsets or earphones

Features

• 2200mAh provides 80% extra battery for an average smartphone*
• Get an extra 11 hours of talk time on an iPhone X or 10 hours on a Samsung Galaxy S9
• Rechargeable more than 500 times
• Includes 20cm micro USB cable for charging and re-charging
• Built-in overcharging and short circuit protection
• Watt Hour Rating: 8.1 Wh
• Input: DC5V1A
• Output: DC 5V 1A
• Charging Time: 4to 5 hours
• Size: 91mm (L)x21mm (W)x 21mm (H)
• Weight: 88g
• Certifications: RCM, RoHS, UN38.3

To Charge Power Bank

• Using the included micro USB cable, connect the larger USB-A connector to a USB wall charger
• Connect the smaller micro USB connector to the input port on the power bank
• During charging the LED indicator will flash to show charging status
• When charging is complete the LED indicator will remain on To Charge a Mobile Phone or other USB Device

To Charge Phone or USB Device

To Charge a Mobile Phone or other USB Device

• Using your phone or other USB device’s charging cable, connect the USB-A connector to the output connector on the power bank
• Connect the other end of the cable to your device
• Charging should commence automatically
• If your phone or device uses a standard micro USB Type B connector then you can also use the included cable to charge your device
• When your phone or device is fully charged, the power bank will automatically turn itself off

Important Safety Instructions

• To maximize battery life span, fully charge power bank before first use for 7 to 8 hours
• Store power bank in a cool and dry place.
• Do not store power bank in hot or humid environment
• Operating temperature should be between -10c to 45c
• If power bank is not used for long periods of time, you should charge and discharge once every three months
• When charging a device, the power bank may feel warm, this is a normal operating condition and should not be cause for concern
• In normal conditions, the battery performance will decline over several years
• Do not dispose of power bank in heat or fire
• Do not clean power bank with harmful chemicals or detergents
• Misuse, dropping or excessive force may cause product damage

iPhone and iPod are trademarks of Apple Inc., registered in the U.S. and other countries.

* Based on iPhone 8 with battery capacity of 1821 mAh Made in China

The certificationprogram ensures this charger has passed rigorous tests to guarantee safety, compatibility and energy efficiency.

Compatibility

Compatible with Qi-enabled devices* including

• iPhone X
• iPhone 8
• iPhone 8 Plus
• Samsung S9/S9+
• Samsung S8/S8+
• Samsung S7/S7 Edge
• Samsung Note 8
• Samsung Note 5
• Sony Xperia XZ2
• Nokia 8 Sirocco
• LG G7 ThinQ
• LG V30+

Features

• 360˚ rotation to change from flat surface to angled surface
• Supports 7.5W Apple wireless fast charging for iPhone X/8/8 Plus
• Supports 10W wireless fast charging for compatible devices such as Samsung Galaxy S9, S9+, S8, S8+, Note 8, S7 & S7 Edge
• Supports 15W wireless fast charging to future proof your wireless charging needs
• Supports 5W standard wireless charging for all Qi enabled devices
• No need to remove your protective case. Works with most cases up to 3mm thick
• LED indicator to show charging status
• Smart IC enables energy saving mode when device is fully charged
• Full safety protection for your devices with Qi certified temperature control, strict voltage regulation & short circuit protection
• Includes certified Quick Charge 3.0 USB wall charger and 1.5m micro USB cable

Check with device manufacturer for Qi wireless compatibility

Wireless Charger Operation

• Using the included micro USB cable, connect the wireless pad to the included Quick Charge 3.0 USB wall charger
• The red LED will be on for 3 seconds to indicate the charging pad is powered on and in stand-by mode
• Place your Qi enabled wireless phone on the charging pad and your phone should start charging automatically
• The LED will flash green to indicate charging
• If your phone does not start charging, move your phone until the correct position is found and your phone starts charging
• When your phone is fully charged, the Smart IC enables energy saving trickle charge mode

Please Note
To achieve 7.5W fast charging for Apple devices or 10W fast charging for Android devices, the charging pad needs to be connected to the included Quick Charge 3.0 USB wall charger or equivalent.

Specifications

• Wireless Standard: WPC/Qi (v1.2.3)
• Quantity of Wireless Charging Coils: One Coil
• Input: DC 5V 2A or DC 9V 2A or DC 12V 2A
• Output: 5W / 7.5W / 10W / 15W (Max)
• Working Frequency: 110 to 205KHz
• Charging Distance: 3 to 8mm
• Charging Efficiency: >72%
• Dimensions: 77 x 77 x 26.5mm
• Weight: 100g

Important Safety Instructions

• Only use original or reputable third party chargers and cables
• Do not get wet to avoid causing short circuit damage and leakage
• Do not use in extreme hot, humid or corrosive environments to avoid short circuit damage and leakage
• Do not place too close to magnetic strip or chip ID card to avoid magnetic failure
• Do not place within 20cm of implantable medical devices (pacemaker, cochlear implant etc.) to avoid potential interference
• Do not clean with harmful chemicals or detergents
• Misuse, dropping or excessive force may cause damage to the charging pad

Please Note: When wirelessly charging a device, the wirelesscharger and your device may feel warm. This is a normal operating  condition and should not be cause for concern.
iPhone is a trademark of Apple inc., registered in the U.S. and other countries. The ‘Qi’ Symbol is a trademark of the Wireless Power Consortium.
Android is a trademark of Google Inc.
www.mycomsol.com.au

comsol Wireless Car Charger User Manual

Compatibility

Compatible with Qi-enabled devices* including

• iPhone X
• iPhone 8
• iPhone 8 Plus
• Samsung S9/S9+
• Samsung 58/58+
• Samsung S7/S7 Edge
• Samsung Note 8
• Samsung Note 5
• Sony Xperia XZ2
• Nokia 8 Sirocco
• LG G7 ThinQ
• LG V30+

Features

• Qi certified to guarantee safety, compatibility and energy efficiency
• Supplied with window suction mount, air vent holder and dash mount disc with 3M adhesive sticker
• Supports 5W standard wireless charging for all Qi enabled devices
• No need to remove your protective case. Works with most cases up to 3mm thick
• LED indicator to show charging status
• Smart IC enables energy saving mode when device is fully charged
• Full safety protection for your devices with Qi certified temperature control, strict voltage regulation & short circuit protection
• Includes lm micro USB cable to connect wireless cgarger to USB car charger (USB car charger not included)
• Check with device manufacture for Qi wireless compatibility

Wireless Charger Operation

• Choose either the air vent mount or the window suction mount and  attach the accessory to the wireless charger by snapping the ball into place and tightening the screw
• If mounting on the dash, attach the round disc accessory to the dash using the 3M adhesive sticker and then mount the wireless charger to the round disc using the window suction mount
• Using the included micro USB cable, connect the wireless charger to a USB car charger (USB wall charger not included)
• It is recommended to use original or reputable 3rd party branded USB wall chargers
• When connected to the USB charger, the red LED will be on for 3 seconds to indicate the charging stand is powered on and in stand-by mode
• Place your Qi enabled wireless phone into the spring loaded arms and your phone should start charging automatically
• The green LED will be permanently on to indicate charging
• If your phone does not start charging, move your phone up or down until the correct position is found and your phone starts charging When your phone is fully charged, the Smart IC enables energy saving trickle charge mode
• To remove your phone, just pull it forward and out of the spring loaded arms.

Please Note: When wirelessly charging a device, the wireless charger and your device may feel warm. This is a normal operating condition and should not be cause for concern.

Specifications

• Wireless Standard: WPC/Qi (v1.2.3)
• Quantity of Wireless Charging Coils: One Coil
• Input: DC 5V 2A
• Output: 5W (Max)
• Working Frequency: 110 to 205KHz
• Charging Distance: 3 to 8mm
• Charging Efficiency: >72%
• Weight: 158g

Important Safety Instructions

• Only use original or reputable third party chargers and cables
• Do not get wet to avoid causing short circuit damage and leakage
• Do not use in extreme hot, humid or corrosive environments to avoid short circuit damage and leakage
• Do not place too close to magnetic strip or chip ID card to avoid magnetic failure
• Do not place within 20cm of implantable medical devices (pacemaker, cochlear implant etc.) to avoid potential interference
• Do not clean with harmful chemicals or detergents
• Misuse, dropping or excessive force may cause damage to the charging stand.

iPhone is a trademark of Apple inc., registered in the U.S. and other countries. The ‘Qi’ Symbol is a trademark of the Wireless Power Consortium. Android is a trademark of Google Inc.