CENTER 340022 Wireless 7-Day Programmable Room Thermostat

CENTER 340022 Wireless 7-Day Programmable Room Thermostat

Leave this Quick Start Guide with your customer
Please read the following points before installation as this will help you to prevent the most common reasons for loss of signal and product failure.

	The thermostat and receiver are already paired together. If you have unpaired them by accident, please see page 4 in the installation guide.
	The thermostat and the receiver must be at least 30cm from any metal or electrics, including the boiler casing. Mounting multiple receiver units alongside each other can cause wireless saturation.
	The building’s structure may influence the performance of wireless products e.g. foil backed plasterboard, thick stone walls, etc.
	Keep the thermostat at least 1m away from any object that could create interference e.g. microwave ovens, wireless hubs, smart meters, cordless phone bases, etc.
	The Center programmable thermostat has a default schedule. Help the end user to program their schedule after installation and save callbacks later.

What do the lights on the receiver mean?
Green light – when the signal is good.
Red flashing light – when the wireless signal is lost.
For further information please see page 3 of the installation guide.

Your Center programmable thermostat will be most efficient when it’s used in an automatic mode, not in manual mode.

	A programmable thermostat allows you to create a schedule that reflects the heating requirements in your home. This will help you to reduce wasted heat and increase the efficiency of the system.
	There are no ‘off’ periods just time and temperature set points. The boiler will only call for heat if the room temperature drops below a set point.
	You can program up to 4 different set points for each day of the week, to suit your needs. To find out how to program your thermostat, please go to page 3 of the user guide.

Scan this QR code for more information or speak to one of our call center advisors on 0344 292 7062
Scan this QR code for more information and to access the user & installation guide.

www.wolseley.co.uk
R32349361-001 A

DOWNLOAD RESOURCES

• CENTER 340022 Wireless 7-Day Programmable Room Thermostat [pdf] User Guide 340022, Wireless 7-Day Programmable Room Thermostat, 340022 Wireless 7-Day Programmable Room Thermostat
• Read more: https://manuals.plus/center/340022-wireless-7-day-programmable-room-thermostat-manual#ixzz7jh3FHjih

FAQ’S

What is the difference between the WIFI thermostat and the CENTER 340022?

The WIFI thermostat has a built in WIFI module and does not require a separate receiver. The CENTER 340022 requires a separate receiver.

Can I use this thermostat in my 24V system?

Yes, this thermostat can be used in 24V systems. However, you must use a 24V compatible receiver (CENTER 320030). This will allow you to use this thermostat with your 24V system.

How do I set the temperature on my center thermostat?

By changing the time there changing what time it comes on and pressing ok. I can change what temperature you’d like to come on to and then press. Ok you then go on to its next setting.

Why is my center thermostat not working?

Check the batteries in the thermostat
It sounds so obvious but this is a really common thing. Being wireless, the sole power source for the thermostat is its batteries and they don’t last forever. Try changing the batteries and then turn the heating on.

How do you reset a wireless center thermostat?

A common way to reset almost any thermostat is to hold down the reset button for 5+ seconds. Alternatively, try resetting battery-powered thermostats by flipping the battery directions around for 5s, then flip them back. If all else fails, switch off the power at the circuit breaker for a couple minutes.

What temperature should I set my thermostat at night in the winter?

You would think when winter temperatures drop at night you’d want to turn the furnace up when you go to sleep, right? Not so fast. The U.S. Department of Energy says an indoor temperature of 65 degrees Fahrenheit at night is best.

Will low batteries affect thermostat?

Having a low battery can cause all kinds of bad readings on the thermostat, which means the thermostat may kick on when it’s not supposed to, the room temperature may be incorrect, and the central system may not work at all.

Should the thermostat be on auto or on?

Keeping your thermostat in the AUTO position means less overall energy is being used and that reduces your utility bills considerably. Not only that, your air filter will last longer than they will if you leave your fan running continuously in other words, if you leave it in the “on” position.

Why is my center thermostat flashing?

If your the screen on your thermostat is blinking, it may just mean that the battery is low, and this is simply your unit’s way of telling you to replace its batteries before it dies entirely. If this is the case, unscrew the thermostat from your wall and replace its batteries.

Why is my thermostat not turning the heat on?

If your heating system will not turn on, the first thing you should do is check the thermostat. The thermostat’s battery may have gone bad, causing it to power off. If your thermostat is hardwired, a power surge, brownout, or brief power outage may have caused the thermostat to lose its settings.

How do I know if my thermostat is broken?

7 Ways to Tell Your Thermostat Is Broken
Thermostat Has No Power.
AC or Furnace Won’t Turn On.
Heater or AC Won’t Turn Off.
Thermostat Doesn’t Match Room Temperature.
Thermostat Doesn’t Respond.
Short Cycling.
Thermostat Forgets Programmed Settings.

How do you check a thermostat battery?

Look at the back of the thermostat to see what kind of battery is required. You may need a screwdriver to carefully pry the battery out or to remove the cover. Note the direction of the plus and negative signs for AA and AAA batteries, and insert the new batteries in the appropriate slot.

VIDEO

CENTER 340022 Wireless 7-Day Programmable Room Thermostat

CENTER 340017 RF Wireless 7 Day Programmable Thermostats User Guide

Thermostat Interface

Screen and Button Overview

1.  Programming Menu
2.  Settings Menu
3. Alert
4. Room Temperature
5. Current time
6. Heat demand
7.  Optimization
8. Low battery
9. Wireless signal
10.  Keypad Locked
11.  Temperature adjust
12.  Right button
13.  Middle button
14.  Left button
15.  Schedule period
16.  Day

Status Icons

• Temperature Override Active: Displayed if the programmed temperature has been manually adjusted.
• Low Battery: Power has reached approximately 10% (see Changing the Batteries on page 9).
• Heat Demand: Room temperature is below setpoint – indicating there is a demand for heating (boiler activity might occur).
• Optimization Active: Only displayed if optimization has been enabled in the installer settings.
• Wireless Signal: Thermostat (Wireless only) is connected to the Receiver Box.

Menu & Navigation Icons

• Back: Return to the previous screen/menu.
• Confirm: Confirm a change or selection.
• Standby: Turns the heating on or off.

Navigating the Menu

• Press the MENU button to enter the main menu.
• Press or buttons to select a menu item – the selected item will flash.
• Press or change and advance to the next selection or press to go back to the previous selection.

Menu

Heating Schedule
Your Thermostat comes with the following default schedule. Follow the next steps to adjust the heating schedule.

Adjusting the Schedule

1. Press MENU to enter the main menu.
2. Press to select the schedule  menu  and press
3. Press or to select the day to be  adjusted and press
4. Press or to select the period to  be adjusted and press
5. Press to adjust the time  and press
6. Press or to adjust the  temperature and press
7.  Repeat these steps to make adjustments to the remaining periods and days – or press to save changes and return to the home screen.

Copy Schedule

1. Press or to choose the day you want to copy the schedule from and press COPY
2. Press or to choose the day you  want to copy the schedule to and press

Settings (Date & Time)

1. Press MENU to enter the main menu.
2. Press to select the settings  menu SET and press
3. Press o select YEAR to skip forward to MONTH
4. Press  to adjust the YEAR  and press
5. Press to select MONTH to skip forward to DAY)
6. Press to adjust the MONTH  and press
7. Press to select DAY to skip forward to HOUR
8. Press to adjust the DAY  and press
9. Press to select HOUR to skip forward to MINUT
10. Press to adjust the HOUR  and press
11. Press to exit SETTINGS and return to the home screen
12. Press MINUTE and press
13. Press or to adjust the  MINUTE and press

Devices Modes

Automatic Operation
During normal use your Thermostat will follow the programmed schedule – indicated by the icon.

Manual Operation
The set temperature is followed permanently – indicated by the icon.

Temporary override
Press the or set the new desired temperature. The programmed schedule will resume at the next programmed setpoint.

Permanent override
Press the or buttons to adjust the set temperature. This temperature is set until manually changed again.

Standby mode (with frost protection)
Save energy by switching the heating off when not required – e.g. during warmer summer months, or when doors and windows are open for extended periods of time. If the temperature drops to 5°C the heating will come on to prevent the heating pipes from freezing.

• Press to switch the heating off – the display will show OFF
• Press a gain to switch the heating on – the display will show

Optimization

Your Thermostat has optimization functions that aim to save energy while maintaining suitable comfort levels. The Thermostat displays during the optimization period if set. By default optimisation is disabled, see instructions on the installation guide on how to activate it.

•  Optimum Start learns how long it takes your home to reach a set temperature and then turns the heating on a bit earlier to achieve that temperature at the programmed time.
•  Optimum Stop saves energy by switching off a little bit earlier than the programmed time. If your home is up to temperature, you will not notice the effect on the temperature, but you should see a difference in your fuel bill.

Changing the Batteries
The Thermostat is powered by 2 x AA batteries, although a battery icon is not shown on the display during normal use. The only time you will see the battery icon is when they become low on power.

• is displayed when battery power has reached approximately 10% – you should be prepared to change them soon.
• will flash when battery power has become critically low – you should change them immediately to make sure there is no disruption to your heating system.
• Replace with 2 new 1.5V LR6 AA Alkaline batteries only – which should last approximately 2 years depending on Thermostat use.

Please help to protect the environment by recycling old batteries in accordance with local regulations.

Troubleshooting

If you have difficulty with your Thermostat, try these suggestions. Most problems can be corrected quickly and easily.

Wireless Thermostat & Receiver Box only

Documents / Resources

CENTER 340017 RF Wireless 7 Day Programmable Thermostats [pdf] User Guide 340017, 340018, RF Wireless 7 Day Programmable Thermostats, 7 Day Programmable Thermostats, Programmable Thermostats, 340017, Thermostats

References

• 
  Wolseley | Plumbing, Heating & Cooling Specialist Merchant