MC420B

BLUETOOTH® | 3″ (76 mm) WEATHER RATED
SPEAKER AND AMPLIFIER SYSTEM

Congratulations on your purchase of a BOSS Audio Systems Off-Road amplified speaker system. It has been designed, engineered and manufactured to bring you the highest level of performance and quality, for years of listening pleasure.

Thank you for making BOSS AUDIO SYSTEMS your choice for entertainment!

Features:

Aux-In (3.5mm)
Speaker Clamp Mounts
Weatherproof Volume Control
High-Impact, High Temp Speaker Enclosures
Weatherproof Speakers
Bluetooth Audio Streaming

2

Connections

Amplifier and Loudspeaker Mounting

Install Reminder
The components and wiring should not be installed around any moving parts, keep away from ignition parts, fuel lines, or any hot exhaust
Speakers should not be installed where they might inhibit safety features on the vehicle (i.e. lights, horns, brake levers, etc…)

3

12 VDC SPDT Relay
(Single Pole Double Throw)
NOT INCLUDED, SOLD SEPARATELY

4

Installation

1. Screw the brackets to the bottom of the speakers.
2. Find a safe, ideal mounting location and fit the brackets over the chosen mounting bars.
3. Fasten the mounting screws after you review the safety of the mounting location.

Wiring

1. Be sure to run the wiring securely and far away from any moving components.
2. Connecting the power cable to the power source: You will need to connect the 12V red wire to a (fused 7.5A) switched power source.
3. Use the 3.5mm stereo jack to connect to your entertainment source(MP3 player, etc).
4. Use your player device and wired remote volume controller to control your level of loudness.

Bluetooth
To pair and connect your Bluetooth device to the MC420B Enter Settings > Bluetooth Menu > Search > “Boss Audio MC420B” >lf Prompted to enter a passcode enter : “0000”

6

Specifications

Operation Voltage ————————- 10~16V
THD —————————————- <0.1%
S/N ————————————— >85 dB
Channel Separation ———————— >50 dB
Frequency Response —————— 50Hz – 15KHz
Sensitivity ——————————- >130mv
Speaker Wires ——————————- 4.6′
Volume Control Wire ————————- 6.2′
Audio Input Cable ————————— 1.9′
Power Cable ——————————— 6.2′
Bracket Size Range ——————- 0.75″~1.25″
Fuse Rating ——————————– 7.5A
Amplifier dimensions ————– 3.6″x2.3″x1.5″

7

NOTES

8

BOSS Audio Systems
3451 Lunar Court • Oxnard, CA 93030
www.bossaudio.com
800-999-1236 US Toll-free
805-751-4853 Customer Service
Tech Support: www.bossaudio.com/support

0719

The Bluetooth® word mark and logos are registered trademarks owned by Bluetooth SIG, Inc. and any use of such marks by BOSS Audio Systems is under license. Other trademarks and trade names are those of their respective owners.

PHANTOM 800
USER’S MANUAL

BLUETOOTH® 3″ (76mm) WEATHER RATED BLACK SPEAKERS
FEATURING BUILT-IN AMPLIFIER SYSTEM

Congratulations

On your new purchase of a Phantom800 amplified speaker system. It has been designed, engineered and manufactured to bring you the highest level of performance and quality, for years of listening pleasure.

Thank you For making Boss Audio Systems your choice for motorcycle audio entertainment.
Please read through these Instructions carefully so you will know how to operate your speaker property. After you have finished reading this instructions, keep this document in a safe place for future reference.

Contents

Phantom 800 speakers w/clamps…………………………………………………………….. 2 pcs
Mounting inserts:
1” diameter ( installed ) …………………………………………………………………………… 4 PCS
1.25″ Hlameter ………………………………………………………………………………………….4 PCS
1.5″ Giammeter ……………………………………………………………………………………….. 4 PCS
5mm Hex wrench ………………………………………………………………………………………1 PC
6mm Hex wrench …………………………………………………………………………………….. 1 PC

Features

Your new Phantom800 speakers feature the following:

• 3.5mm audio input
• Adjustable speaker clamps
• Weatherproof volume control
• Weatherproof speakers
• Bluetooth audio streaming
• Built-in class D amplifier

Installation/Mounting

1. Adjust the direction of the speaker and screw the bracket to the bottom of the speaker.
2. Select the rubber inserts that fit your mounting bar and place them into the brackets.
3. Find a safe, ideal mounting location and fit the clamps over the chosen bars.
4. Fasten the mounting screws after you review the safety of the mounting location.
   

Reminder

• The components and wiring should not be installed around any moving parts, keep away from ignition parts, fuel lines, or any hot
  exhaust components.
• Speakers should not be installed where they might inhibit safety features on the vehicle ( i.e. lights, horns, brake levers, etc.).

Power Supply Connection

Option A
Connected to Battery through a 12 VDC SPDT Relay (Single Pole Double Throw) NOT INCLUDED, SOLD SEPARATELY

Option B
Connected to Battery through a Waterproof Switch (250V AC/6A) NOT INCLUDED, SOLD SEPARATELY
Note :

1. AUX 3.5 female input connector for output of other audio devices like mobile phone, MP3, !pod and so on.
2. Should use standard 3.5mm 3-pole male plug AUX cable (not included).
3. Stop BT connection first when using the 3.5mm AUX input as audio source input.

Option A (Relay)

1. Be sure to run the wiring securely and far away from any moving components.
2. Connect the power cable to the power source. You will need to connect the 12V red wire to a fused 7.5A (not included) switched power source.
3. Use the 3.5mm stereo jack to connect to your source of music (MP3 player, mobile device, etc.).
4. Use your player device and wired remote volume controller to control the volume.

Bluetooth Connection

1. Go into the Settings Menu of your mobile device.
2. Enter the Bluetooth menu.
3. Search for and select ” Boss Audio Phantom ” from the available devices.
4. If prompted, enter passcode “0000”.

Specifications

THE: —————————————————————————————————————-<0.1%
S / N: ————————————————————————————————————-> 75 dB
Channel separation: ——————————————————————————————–> 50 dB
Frequency response: ———————————————————————————-50Hz – 20 KHz
Input sensitivity: ——————————————————————————————-Max 400 my
Speaker wires: ———————————————————————————————————3.3′
Volume control wires: ———————————————————————————————–4.9′
Audio input cable: —————————————————————————————————-0.8′
Power cable: ———————————————————————————————————–3.3′
Mounting diameter: ——————————————————————————-1″, 1.25″, 1.5″ only
Dimensions: HxDxW ————————————————————————-11.46″ x 6.38″ x 4.77″
Unit weight: ——————————————————————————————5.221bs / 2.37 kg
Specification subject to change without notice.

Troubleshooting

SYMPTOM ———————————————————————————————— SOLUTION
No sound ———————————————————————————- Unit or Device is MUTED
Audio Is distorted —————————————————————————Bluetooth is out of range
No Power-on tone ——————————————————————————- Check fuse or wiring
Bluetooth not connecting ————————————————————- Switch off power for 10 secs

NOTES

All rights reserved. No part of this publication may be reproduced, distributed, or transmitted In any form or by any means, Including photocopying, recording, or other electronic or mechanical methods, without the prior written permission of BOSS AUDIO SYSTEMS.

Copyright © 2020 BOSS AUDIO SYSTEMS.

BOSS Audio Systems
3451 Lunar Court • Oxnard, CA 93030
www.bossaudio.com
805-751-4853 Customer Service
Tech Support: www.bossaudio.com/support

The Blueloott® word mark and logos are registered trademarks owned by Bluetooth SIG, Inc. and any use of such marks by BOSS Audio Systems is under license. Other trademarks and trade names are those of their respective owners.