User Manual

Bluedio Headphones
Model: T+3

Welcome to your new Bluedio headphones
We appreciate your choice of Bluedio headphones. Before use, please read this user manual carefully and keep for future reference.

Purchase verification
You can find the verification code by scraping the coating off the security label that is affixed to the original packaging. Enter the code on our official website: www.bluedio.com for purchase verification.

Learn more and get support
Welcome to visit our official website: www.bluedio.com; Or to email us at [email protected]; Or to call us at 020-86062626.

Important Safety Information

• DON’T use the headphones at a high volume for any extended period to prevent hearing damage.
• DON’T use the headphones while driving or in any environment requiring yourfull attention.
• Keep the headphones, accessories and packaging parls out of reach of children to prevent accidents and choking hazards.
• Allways keep the headphones dry and DON’T use the headphones near water.
• STOP using the headphones immediately if you feel sick while using the headphones.
• DON’T expose the headphones to either extremely high or low temperaturesQdeal: 10’C to 35’C ).
• Removal of the chargeable battery in the headphones shall be conducted only by a qualified professional. DON’T try to replace the battery onyourown.

In the box

• Bluedio T3 Plus headphones
• 3.5mm Audio cable
• Micro-USB charging cable
• Drawstring cany bag
• User manual

Headphones Overview

Operation

Charging the battery
The battery needs to be charged when you hear “Please charge” or you see the red light blinks.

1. Tum off the headphones before charging.
2. Plug the small end of the included charging cable into the charging connector on the headphones. Plug the large end into a USB wall charger or computer that is powered on . When charging, the red light stays on.
3. Allow 2 hours for a full charge. When fully charged, the blue light slays on.

Note:

1. The headphones will not play while charging.
2. USB wall charger requires oulput 5VDC, 0.5A .

Entering pairing mode
When the headphones are off (If not, turn off the headphones first), press and hold the MF Button until you hear “Pairing” or you see the blue light stays on (instead of blinking).
Note: If this is the first time connecting the headphones to your device via Bluetooth, please make sure the headphones have entered pairing mode.

Pairing

1. Move the headphones close to your mobile phone. The closer, the better.
2. Make sure the headphones have entered pairing mode. (See instruction “Entering pairing mode”)
3. Go to your phone’s Bluetooth settings, add or search devices. (Make sure the Bluetooth feature is turned on)
4. Select “T +3rd Gen• from the found Bluetooth devices. (If asked for a password or PIN code, enter ·oooo·)
5. Once successfully paired and connected, you will hear “Connected”.
   Note: If pairing is not successful within 60 seconds, the blue light blinks and the headphones are out of pairing mode. Please turn off the headphones and try pairing again.

Turning the headphones on
Press and hold the MF Button until you hear “Power on” or you see the red and blue light comes on.
Note: If the headphones have successfully paired to your device, simply turn on the headphones to reestablish the Bluetooth connection. No need to enter pairing mode.(See instruction “Reconnecting”)

Turning the headphones off
Press and hold the MF Button until you hear “Power off” or you see the red and blue light comes on.

Connecting to 2 mobile phones:

1. Move the headphones close to 2 mobile phones. The closer, the better.
2. Make sure the headphones have entered pairing mode. (See instruction “Entering pairing mode”)
3. Go to the Bluetooth settings on phone 1, turn on the Bluetooth feature, add or search devices, select “T +3rd Gen”.
4. Turn off the Bluetooth feature on phone 1, and turn off the headphones.
5. Make sure the headphones have entered pairing mode. (See instruction “Entering pairing mode”)
6. Go to the Bluetooth settings on phone 2, turn on the Bluetooth feature, add or search devices, select “T +3rd Gen”.
7. Turn on the Bluetooth feature of phone 1, and the headphones will reconnect to phone 1 automatically. (If automatic reconnecting fails, please Un pair/Forget This Device on phone 1. Turn off the headphones and try pairing again)

Reconnecting

1. Move the headphones close to your mobile phone. The closer, the better.
2. Simply turn on the headphones, no additional operation needed. When you see the blue light blinks, the headphones are in reconnecting mode.
3. Turn on the Bluetooth feature of your phone, and the headphones will reconnect to your phone automatically. Once successfully reconnecting, you will hear “Connected”.

Note: If automatic reconnecting fails, please Un pair/Forget This Device on your phone. Turn off the headphones and try pairing again.

Disconnecting the headphones from your phone
Turn off the headphones or turn off the Bluetooth feature on your phone.

Note: “in Bluetooth mode” means the headphones and your phone are connected via Bluetooth. Using the headphones to talk (in Bluetooth mode)

To answer a call
When you hear a ringtone, there is an incoming call. To answer it: press the MF Button once.

To end a call
When you are on call, 1o end it press the MF Butlon once.

To reject a call
When }’OU hear a ringtone, there is an incoming call. To reject it press and hold the MF Butlon for 2 seconds.

To redial the last number
Press the MF Button twice, }’OU will hear a beep and the redialing process begins.

Voice dial (must be supported by your mobile phone)
Press and hold the MF Button until you hear a beep.

Call waiting (must be supported by your mobile phone)
When you are on call 1, and }’OU receive call 2:

1. To end call 1 & answer call 2: Press the MF Button once
2. To answer call 2 and put call 1 on hold: Press and hold the MF Button until you hear a beep When you are on call 2, and call 1 is on hold:
3. To switch back to call 1 and put call 2 on hold: Press and hold the MF Button until yoy hear a beep
4. To switch back to call 1 & end call 2: Press the MF Button once

Bluetooth playback and volume controls
*The headphones are playing music via Bluetooth.
Pause/Play: Press the MF Button once
Skip forward to the next track: Press the Vol+ Button once
Skip backward to the previous track: Press the Vol- Button once
Volume Up: Press and hold the Vol+ Button
Volume Down: Press and hold the Vol- Button

Line-in music playback

1. Plug the included audio cable into the jack on the headphones.
2. Plug the included audio cable into the jack on your device.
   Note: Make sure the headphones are turned off before using this feature.

Line-out music sharing
1. Connect the headphones to your phone via Bluetooth.
2. Connect the headphones to other wired headphones or amplifier.

Turning 3D sound on/off (in Bluetooth mode)
ON: When the headphones are playing music, press the MF Button and Vol+ Button together then release them immediately. You will hear a tone and the 3D sound is on.
OFF: When the 3D sound is on, press the MF Button and Vol- Button together then release them immediately. You will hear a tone and the 3D sound is off.

Turning Micro SD card mode on/off
• Please insert a Micro SD card loaded with audio files before the Micro SD card mode is turned on.
ON: Press and hold the Play/Pause Button until you see the green light stays on.
OFF: Press and hold the Play/Pause Button until you see the green light goes out.
Note: In Micro SD card mode, please do not take out the Micro SD card. If you would like to take out the card, please tum off the headphones first.

Micro SD card playback without your phone
When the headphones are off (If not, tum off the headphones first), tum on the Micro SD card mode. (See instruction ”Turning Micro SD card mode on”)
Note: You cannot use the headphones to talk when using this stand alone playback feature. If you turn on the headphones, the playback will be interrupted by voice prompt.

Micro SD card playback and volume controls
*The headphones are playing music from inserted Micro SD card.
Pause/Play: Press the Play/Pause Button once Skip forward to the next track: Press the Vol+ Button once Skip backward to the previous track: Press the Vol- Button once
Volume Up: Press and hold the Vol+ Button
Volume Down: Press and hold the Vol- Button

Switching between Bluetooth mode and Micro SD card mode
When the headphones are playing music via Bluetooth, you would like to play music from the inserted Micro SD card: please pause the Bluetooth playback, then tum on the Micro SD card mode. (See instruction ”Turning Micro SD card mode on” )

If the headphones are playing music from the inserted Micro SD card when they have connected to your phone via Bluetooth. When there is an incoming call, you will hear a ringtone or you will see the blue light blinking quickly. Now you can use the headphones to talk. (See instruction “Using the headphones to talk”)

Note: When the call is ended, the playback will resume. If the call takes over 5 minutes, the Micro SD card mode will automatically tum off. To resume the playback, please tum on the Micro SD card mode. (See instruction “Turning Micro SD card mode on” )

Transferring files

1. Plug the large end of the included charging cable into your computer.
2. Plug the small end into the headphones with a Micro SD card inserted.

FAQ

1. Headphones cannot be paired to your mobile phone.
   Solution: Check if the headphones have entered pairing mode. Check if your mobile phone supports the HS or HF profile. Check if the Bluetooth search function of your phone is turned on. Check if your mobile phone is turned off. Check if the distance between the headphones and your phone exceeds 10m.
2. Headphones cannot be turned on.
   Solution: The battery runs low. Recharge the battery.
3. Can the battery be replaced?
   Solution: The battery is non-<letachable and cannot be replaced.
4. Can the headphones be used while driving?
   Solution: DON’T use the headphones in an environment that requires your special attention.
5. Bluetooth connection is suddenly interrupted within 10 maters.
   Solution: Check if there is metal or other material interfering with the transmission.
6. No audio signal
   Solution: Check if the headphones are turned off. Check if the headphones are paired. If necessary, pair the headphones with the audio source again. Check the connection to your audio source. The volume is too low, tum up the volume.
7. Can the headphones be used to control the APPs on your mobile phone?
   Solution: Software settings of APPs may be varied, thus some APPs may not be controlled by the headphones.
8. The headphones can’t be recharged.
   Solution: Check the connection of USB plugs. If necessary, remove the USB cable and plug again. Tum on the headphones then tum it off.

Specifications

• Bluetooth version: 4.1+EDR
• Bluetooth profiles: A2DP, AVRCP, HSP, HFP
• Bluetooth transmission frequency: 2.4GHz to 2.48GHz
• Bluetooth operating range: up to 33 feel (free space)
• Drivers: Cl>57mm
• Impedance: 160
• SPL: 116dB
• Micro SD card music time: 18 hours
• Frequency response: 15Hz-25,000Hz
• Total Harmonic Distortion (THD): <0.1%
• Bluetooth music/talk time: about 20 hours
• Standby time: about 1100 hours
• Charging time: 2 hours for full charge
• Operating temperature range: -10 ‘C to 50’C only

Specifications are subject to change without notice .

Bluedio HS Neckband Portable Bluetooth Speaker

SPECIFICATIONS

• Brand: Bluedio
• Model Name: HS
• Speaker Type: Outdoor
• Connectivity Technology: Bluetooth
• Special Feature: Multiple connection mode–Bluetooth/FM/SD, Lightweight Neckband wearable
• Product Dimensions: 9.13 x 6.92 x 0.98 inches
• Item Weight: 1.12 ounces
• Item model number: HS
• Batteries: 1 Lithium Ion batteries are required. (included)

WHAT’S IN THE BOX

DESCRIPTION

HS Bluedio

Wireless Wearable Personal Body Speaker Neckband

a speaker that can be worn and loaded with features for an exceptional listening experience. When watching films, live visuals, or playing games, it creates the sensation that you are there in the moment. You are immersed in clear, rich music while also remaining conscious of your surroundings.

• Easily connect with Bluetooth 5.0
• FM mode with SD Card (max 32GB) support
• Durable & Transportable Design
• Integral Microphone for Hands-free Calling
• 2W*2 Speaker Stereo Output Built-In

• Your hands and ears must be free
  If you wear this wearable Bluetooth speaker around your neck, you may listen to music as you cook or engage in outdoor activities like walking, cycling, or mountain climbing. You can keep in touch with the outside world while having your hands and ears free to listen to music and make calls.
• Precise positioning when playing a game
  TIPS: Bluedio HS can pair with your phone using Bluetooth, but not a gamepad. We only advise using it for playing games on your phone.
  Are you frustrated that, when playing a game with an old-style speaker, you can never find the enemy’s location? Use the Bluedio HS wearable speaker to locate objects by using the left and right channels separately and the stereoscopic sound effect.
• Create a Sound Zone for Yourself
  When speakers are oriented upward and your ears are free, what you hear is amplified while the sounds around you are muted. While you are listening to music, you can maintain awareness of your surroundings. You can stay linked to your surroundings and your music with Bluedio HS.
• Stable Bluetooth 5.0 Connection
  With your Bluetooth devices, the newest Bluetooth 5.0 technology offers a solid connection range of up to 33 feet. Superior Bluetooth connectivity makes it simple to communicate hands-free.
• Support for FM Mode and SD Cards
  In addition to the most recent Bluetooth 5.0 technology, which links to smartphones, you can also utilize the TF/SD card (max 32G) slot to listen to your favorite music or the FM mode to stay current with the weather and other crucial information for your location.
• Elegant Design and Ergonomics
  A small stereo surround private music field is created by the ergonomic shape, which leans lightly on your shoulder to keep you comfortable while you listen all day.

FEATURES

• Bluetooth Speaker for the Neck
  With this wearable Bluetooth speaker around your neck, you may enjoy music while cooking supper or engaging in outdoor activities like walking, cycling, mountain climbing, etc. without using your hands or ears. You can keep in touch with the outside world while having your hands and ears free to listen to music and make calls.
• More Than Just Music in True Surround Sound
  When speakers are oriented upward and your ears are free, what you hear is amplified while the sounds around you are muted. While you are listening to music, you can maintain awareness of your surroundings. You can stay linked to your surroundings and your music with Bluedio HS.
• Multiple Connection Modes for Bluetooth Neckband Speaker
  In addition to the most recent Bluetooth 5.0 technology, which links to smartphones, you can also utilize the TF/SD card (max 32G) slot to listen to your favorite music or the FM mode to stay current with the weather and other crucial information for your location.
• Lightweight & Comfy Clothing
  A small stereo surround private music field is created by the ergonomic shape, which leans lightly on your shoulder to keep you comfortable while you listen all day.

FREQUENTLY ASKED QUESTIONS

What is the connectivity technology of the Bluedio HS Neckband Portable Bluetooth Speaker?

The connectivity technology of the Bluedio HS Neckband Portable Bluetooth Speaker is Bluetooth.

What are the supporting protocols of the Bluedio HS Neckband Portable Bluetooth Speaker?

The supporting protocols of the Bluedio HS Neckband Portable Bluetooth Speaker are A2DP, AVRCP, HSP, and HFP.

What is the frequency response range of the Bluedio HS Neckband Portable Bluetooth Speaker?

The frequency response range of the Bluedio HS Neckband Portable Bluetooth Speaker is 20Hz-20KHz.

What is the standby/Bluetooth standby time of the Bluedio HS Neckband Portable Bluetooth Speaker?

The standby/Bluetooth standby time of the Bluedio HS Neckband Portable Bluetooth Speaker is about 1000 hours/300 hours.

What is the music/call time of the Bluedio HS Neckband Portable Bluetooth Speaker?

The music/call time of the Bluedio HS Neckband Portable Bluetooth Speaker is about 3-4 hours.

What is the input voltage/current of the Bluedio HS Neckband Portable Bluetooth Speaker?

The input voltage/current of the Bluedio HS Neckband Portable Bluetooth Speaker is 5V/≥500mA.

What is the output power of the Bluedio HS Neckband Portable Bluetooth Speaker?

The output power of the Bluedio HS Neckband Portable Bluetooth Speaker is 2*2W.

What are the dimensions and weight of the Bluedio HS Neckband Portable Bluetooth Speaker?

The dimensions of the Bluedio HS Neckband Portable Bluetooth Speaker are 9.13 x 6.92 x 0.98 inches and its weight is 1.12 ounces.

What is the Bluetooth version of the Bluedio HS Neckband Portable Bluetooth Speaker?

The Bluetooth version of the Bluedio HS Neckband Portable Bluetooth Speaker is 5.0.

What is included in the box with the Bluedio HS Neckband Portable Bluetooth Speaker?

The box includes the Bluedio HS Speaker, charge cable, and user manual.

Can the Bluedio HS Neckband Portable Bluetooth Speaker be used for gaming with a gamepad?

No, the Bluedio HS Neckband Portable Bluetooth Speaker cannot be used for gaming with a gamepad. It is only advised to use it for playing games on your phone.

What is the maximum capacity of the SD card that can be used with the Bluedio HS Neckband Portable Bluetooth Speaker?

The maximum capacity of the SD card that can be used with the Bluedio HS Neckband Portable Bluetooth Speaker is 32GB.

What is the Bluedio HS Neckband Portable Bluetooth Speaker?

The Bluedio HS is a portable Bluetooth speaker designed in a neckband style, allowing you to wear it comfortably around your neck and enjoy music or audio on the go.

What are the main features of the Bluedio HS speaker?

The main features of the Bluedio HS include Bluetooth connectivity, a neckband design, a built-in microphone for hands-free calls, extended battery life, and high-quality audio output.

How do I connect my device to the Bluedio HS speaker?

To connect your device, enable Bluetooth on your smartphone, tablet, or other compatible device. Then, search for available Bluetooth devices and select “Bluedio HS” to establish a connection.

What is the wireless range of the Bluedio HS speaker?

The wireless range of the Bluedio HS speaker is typically around 33 feet (10 meters), but it may vary depending on environmental factors.

Headphone Overview

Notes on usage and operation:
Power on / off
Toggle the power-on key of Bluetooth to control the power-on / power-off of the headset.

Bluetooth Pairing:

1. The earphone will automatically enter the pairing mode after starting up.
2. Start the Bluetooth of the mobile phone, search / add Bluetooth devices, and select ” T7″ among Bluetooth devices that founded( some devices need to enter the password ” 0000″).
3. Headphones that have been successfully paired will automatically enter the reconnection mode after being turned on, and will automatically connect with the device that was successfully paired last time.

Music Control:
Click the multifunctional key to control the pause/play of music Click the key of volume up to increase the volume, and press and hold to switch to the next song. Click the key of volume down to lower the volume and press and hold to switch to the previous song.

Incoming Call Control
When there is a coming call, click the multifunctional key to answer the call, and click again to hang up the call. You can also tap the right shell of the earphone twice with your finger to answer the incoming call when someone calls in, and tap the right shell of the earphone twice again to hang up the call. When there is a incoming call, you can press and hold the multifunctional key to reject the call.

ANC Active Nolse-cancelIng:
Toggle the ANC active noise-canceling switch, the green indicator light will turn on for a long time and it means that the noise reduction feature will turn on. When the ANC switch is toggled again, the green indicator close down automatically, and it means that the noise reduction feature is turned off.

ANC Shift Switch:
Double-click the ANC shift switch to change the ANC gear position. (Shift between High and Low ) Note: ANC shift feature is only effective both in Bluetooth mode and ANC turned on. The default degree of ANC is high-level.

Intelligent Playback:
Taking off the earphone when playing music,the music being played will automatically pause , and when you put on the earphone again, the music will play automatically.

Line-In Musk Playing:
Use a 3.5mm to Type-C audio cable to connect headphones with mobile phones. computers and other devices to play music. Note: The headset must be turned off when using this feature. ( This product does not give away audio cable, if necessary, please purchase audio cable through Bluedio official store)

Line-out Music Playing
First, connect the headphone No. 1 with the mobile phone via Bluetooth, then turn off ANC feature, and use the 3.5mm to Type-C audio cable to connect the headphone No. 1 with the headphone No. 2 to play music.
Note: ANC must be turned off when using the above feature. Headset No. 2 must support a 3.5 connector. ( This product does not give away audio cable, if necessary, please purchase audio cable through Bluedio official store )

Charge Headset
Turn off the headphones before charging, and use the standard charging cable to charge. When charging, the red indicator will be on all the time. It takes 2 hours for the headphone to be fully charged, and the blue indicator will be on after it is fully charged.

Web services
This product supports web-services. Users can turn to the last page of the manual and scan the QR code with their mobile phones to download APP.

Wake – up web services ( Mobile Phone Installed with APP )
When both the mobile phone and APP are connected to the headset is Bluetooth, double-click the multifunctional key of the headset or tap the right shell of the headset twice to wake-up the feature,and then use the web-services feature and enjoy intelligent services.

Product Anti-forgery
Scrape off the anti-forgery sticker coating on the packaging box to obtain the anti-counterfeiting number of the product, then log on to the official website of www.bluedio.com and type-in the anti-counterfeiting number to check the authenticity of the product.

Consultation and Assistance
Please log on to www.bluedio.com to inquire about the relevant information and technical support of the product. If necessary, please send an email to [email protected] or call the after-sales hotline 400 – 889 – 0123.

Technical specifications:
Bluetooth Version: Bluetooth 5.0
Working Range: up to 10 meters (free space )
Frequency Range: 2.4GHz-2.48GHz
Support profiles: A2DP, AVRCP, HSP, HFP
Driver Unit: 57mm
Noise-cancellation Sensitivity: -25dB
Impedance: 160
Frequency Response Range: 20Hz-20KHz
Sound pressure level(SPL): 115dB
Standby Time: about 1000 hours
Music / Talk Time: about 30 Hours
Working time( For Only Running the ANC): about 40 hours
Charging time: about 2 hours
Operating temperature range: – 10 °C – 50 °C
Input Voltage / Current: 5V /> 500mA
Output Power: 50mW*50mW

User Manual
Model: Bluedio T5S(could-based version)

Headphones Overview

Operating instructions:

Power on:
Press and hold the MF button until you hear “Power on”.

Power off:
Press and hold the MF button until you hear “Power off”.

Pairing mode:
When the headphones are off, press and hold the MF button until you hear “Ready lo pair.

Bluetooth pairing:
Make the headphones enter pairing mode (see instruction “Pairing mode”), and tum on the Bluetooth feature of your phone, select “T 5S.

Music control:
When playing music, press the Pause/Play button once to Pause; press once again to resume.

Volume- button:
Press once to reduce the volume; press and hold to skip to the previous track.

Volume+ button:
Press once to increase the volume; press and hold to skip to the next track.

Answer/Reject phone calls:
Receiving an incoming call, press the MF button once to Answer; press once again to End; Press and hold for 2 seconds to refuse.

Active noise cancelling:
Push the ANC switch to tum on/off the ANC fundion; when it’s on, the green light will stay on.

Language selection:
Tum on the headphones first, then press the MF button and the Volume- button once simultaneously to select Chinese/English/French/Spanish.

Line-in music playback:
Use the standard 3.5mm Type–C audio cable to connect the headphones with
your mobile phone and computer.
Note: Tum off the headphones when using this feature.

Line-out music playback:
Connect headphones 1 with your mobile phone via Bluetooth first, then tum
off the ANC function and use the 3.5mm Type-C audio cable to connect
headphones 1 with headphones 2.
Note: Tum off the ANC function before using this feature. The headphones
2 must support 3.5mm audio jack.

Charge the headphones:
Tum off the headphones before charging.Use the Included Type-C charging
cable to connect the headphones with a computer or wall charger.
While charging, the red light stays on. Allow 1.5-2 hours for a full charge.
Once fully charged, the blue light will stay on.

Smart sensors:
Take off the headphone when it is playing music, the song will automatically pause, when you wear it again, music will be restored.

Cloud function:
The headphones support Cloud service. Users can download the APP by scanning the QR coda on the last page.

Wake up the cloud( Installed the Cloud APP an your phone) Connect the headset with your phone, then double-click the MF button to wake up the Cloud. Cloud service is on, you can enjoy smart Cloud service.

Specifications

Bluetooth version: 5.0
Bluetooth operating range: up to 33 feet (free space)
Bluetooth transmission frequency: 2.4 GHz-2.48GHz
Bluetooth profiles: A2DP, AVRCP, HSP, HFP
Drivers: 57mm
Noise-reduction: -25dB
Impedance: 160
Frequency response: 15Hz-25KHz
Sound Pressure Level (SPL): 115dB
Standby time about: 350 hours
Bluetooth music/talk time about: 32 hours
Pure ANC time about: 43 hours
Charging time: 1.5-2 hours for full charge
Operating temperature range: -1D”C to 50″C only
Charging voltage/current: 5V/>500mA
Output power: 50mW+50mW

Purchase verification
You can find the verification code by scraping the coating off the security
label that is affixed to the original packaging. Enter the code on our official
website: www.bluedio.com for purchase verification.

Learn more and get support
Welcome to visit our official website: www.bluedio.com; Or to email us at
[email protected]; Or to call us at 400-889-0123.

User Manual
Model: Bluedio T6S

Headphone overview

Operational instruction:

Power on:
when headphone is off, press and hold MF button until you hear ”Power on”.

Power off:
When the headphone Is on. press and hold MF button until you hear ••power off”.

Pairing mode:
When the headphone is off, press and hold the MF button until you hear”Ready to pair”.

Bluetooth Pairing:
Make sure the headphone enter pairing mode( see instruction ”Pairing mode”). and turn on Bluetooth function of your phone, select “T6S”.

Music control:
When playing music. press the MF button once to Pause/Play. (Users can increase/reduce volume. or skip to previous/next track via cellphone control.)

Answer/Reject a call:
Receiving an Incoming call,press the MF button once to Answer/End; Press and hold it for 2 seconds to refuse.

ANC Switch:
Push the ANC switch to turn on the ANC function, in about 3 seconds, ANC will be on, and LED light remains green.

Line-in music playback:
Connect the headset with your mob lies phone and computers via 3.5mm Type-C audio cable to play music.
Note: Please tum off Iha headphone before using this function. (audio cable is not provided, if you need it. please order one from Bluedio Official purchase channel.)

Line-out music playback:
Connect headphone 1 with phone via Bluetooth. then tum off ANC feature. Connect headphone 1 with the headphone switch 3.5 mm Type-C audio cable to play music.
Note: Please tum off ANC feature before using this function, and headphone
2 should support 3.5 mm audio connection. (audio cable is not provided. if you need it, please order one from Bluedio official purchase channel.)

Charging the headphone:
Switch off The headset before charging, and use standard charging cable to connect the headphone or wall charger, when it is charging, LED light remains red.
Allow 1.5-2 hours for full charging, once fully charged, LED blue light stays on.

Smart sensors:
Take off the headphone when it is playing music. the song will automatically pause, when you wear it again, music will be restored.

Cloud function:
The headphones support Cloud service. Users can download the APP by scanning the QR code on the last page.

Waka up the cloud( Installed the Cloud APP on your phone)
Connect the headset with your phone, then double-click the MF button to wake up the Cloud. Cloud service is on. you can enjoy smart Cloud service.

Specifications:
Bluetooth version: Bluetooth5.0
Bluetooth range: up to 10 m (free space)
Transmission frequency: 2.4GHz-2.48GHz
Bluetooth Profiles:A2DP, AVRCP, HSP. HFP
Driver units: 57mm
Noise cancelling sensitivity:- 25dB
lmpendence: 16n
Frequency response: 15 Hz-25KHz
Sound pressure level(SPL):115d8
Standby time: about 350 hours
Bluetooth music/talk time: about 32 hours
Working time( For Only Running the ANC): about43 hours
Charging time: 1.5-2 hours for full charge
Operating temperature range: -10″C to 50-C only
Charging voltage/current: 5V/500mA
Power Consumption: 50mW+50mW

Purchase verification
You can find the verification code by scraping the coating off the security label that is affixed to the original packaging. Enter the coda on our official website: www.bluedio.com for purchase verification.

Learn more and get support
Welcome to visit our official website: www.bluedlo.com;
Or to email us at [email protected]; Orto call us at400-889-0123.

Common Issues and solution:

Bluedio hi tws

Manual user model: Bluedio-Hi The Structure Diagram Operating Instruction: Pairing I Method: Open the charging box, dislocate the left and right headphones and press the multifunctional button for a long time, respectively. Once the earpiece is turned on, it enters pairing mode and the left and right headphones automatically connect.

(In the pairing mode of the left and right headphones, tap any of the headphones, it can be paired quickly. Turn on the phone Bluetooth phone to search the name of the device Hello and click on Connect. Pairing II Place the headphones in the charging box, press the charging box button, then open the charging box to take out the earpiece, the earpiece will be automatically turned on and automatically connected.

(Disconnecting one of the headphones does not affect the use of the other) Clear information about the pairing of left and right headphones: if only one earpiece has a sound or the other earpiece is not connected, Please do the following operations for both headphones: Tap and hold the multifunctional button to turn on the left and right headphones accordingly (the blue light light is always on after the earpiece is turned on), and then press the multifunction button for three times on the left and right headphones respectively, these two headphones will be automatically turned off and cleared of the pairing information. Put the two headphones back in the charging box, close the lid and clear the phone’s pairing information. Restart the headphones and turn on the Bluetooth phone to pair Bluetooth.

Music Management: Click on the multifunctional button to control pause/play music. Double-click the right multifunction button to switch the previous track. Double-click on the multi-functional left earpiece button to switch the next track.

Bluedio Hi TWS headphones are a very cost-effective TWS wireless Bluetooth headset with a built-in 13mm horn and high-quality diaphragm ring. Bluedio Hi supports advanced sound coding technology, delivers clear and solid sound quality, and a full-featured good sound experience.

Now, this post will give you a detailed start guide for you and tell you how to use this Bluedio Hi TWS headphones! How to pair Bluedio Hi TWS headphones? Bluedio Hi TWS’s ear headset supports automatic pairing features, if you take The Bluedio Hi out of the battery box, the headphones will turn on and enter the pairing mode.

Step 1: Took out 2 Bluedio Hi headphones from Pitch Step 2: Turn Bluetooth into your phone and search Bluedio Hi TWS Step 3: Choose Bluedio Hi Hi Connected, and you can use it NOTE: Bluedio Hi TWS also supports the use of one ear.

If you want to connect only one of the headphones, you only need to take one of the headphones and connect it with your phone or computer. How do I clean up and repair or reset the pairing information?

If you want to repair the Bluedio Hi TWS headphones: Step 1: take the headphones out of the battery box and turn it on step 2: tap the multifunctional key of two headphones quickly for 3 times If you want to reset or restart the Bluedio Hi TWS headphones: Yes, press a multifunctional key of two headphones for 10s How to charge the Bluedio Hi T headphones? Bluedio Hi TWS headphones are 600mAh charging camera, headphones listen to music for about 5-6 hours, charging bins can charge ears 2-3 times. Recharge Bluedio Hi TWS headphones: Put the headphones in the battery box and press the charging button.

Recharge the Bluedio Hi battery box: plug in the USB cable charging box and the charging light will turn red. For Gearbest customers: If you have purchased Bluedio Hi TWS Earbuds from us and still have problems using firmware, please feel free to contact us. Just fill the ticket with your questions at our Support Center and send it to us. We will do our best to resolve your problem as soon as possible. We are always happy to help.

More than 300,000 products, 20 different categories and 15 local utensils – Several leading brands – Global payment options: Visa, MasterCard, American Express – PayPal, Western Union and bank transfer accepted – Boleto Bancario via Ebanx (for Brazil) – Unregistered Air Mail – Registered Air Mail – Priority Line – Accelerated Shipping – 45-Day Return Money Guarantee – 365-day free warranty on repair CE Connection Bluetooth Earpiece Type In-Ear Retail Packaging Colored Box User Guide (language) English and Chinese principle vocalism Dynamic volume control No gross weight 0.103kg Volume Weight 0.078kg Length Package 9.300cm Packaging Width 7.500cm Package Height 5.000cm Weight Package 0.092kg With Retail Packaging Yes No Skills to Use HeadphonesWe can use Bluetooth without losing HD playback technology 5.0, Just by removing the wireless headset out of the box It can produce incredible sound quality with deep bass and clear trebleReal wireless headphones can block out many ambient noises and prevent wind noise from occurring while running , cycling, jogging, etc. .Extremely light weight and headphone design, with two pairs of earplugs, make sure your headphones are firmly in place and improve the sports experienceThirty the game time is 6 hours after the earpiece is full of electricitSpecifications: Wireless Type: BT Resistor: 32 Work For mobile phones, HiFi headphones, HiFi, Wireless Compatible Memory Card: No Bandwidth: 20-15 000 Hz Bluetooth Version: 5.0 Eaphones Capacity: 55 mAh Charging Box Capacity: 600 mAhSCompatible with:Apple/Xiaomi/Samsung/Huawei Etc Support Bluetooth 5.0 version Package included: 1 x Pair of Headphones 1 x Charging Box 1 x USB Cable 1 x User Customer Feedback Guide 5 Stars: 4 Stars: 3 Stars: 2 Stars: 1 Stars: Write Reviews See All Reviews » »

normal_5f8a15275aa56.pdf
normal_5f878c6c358f2.pdf
normal_5f8abe873c6ff.pdf

User’s Manual

Model: T-Elf

Structural Sketch

T Elf edition tips:

Tips: before using for the first time, remove the transparent insulating paper under the headphones, then put the headphones back into the charging box for normal use.

When a single unit is low in power, you can put the two units into the charging box and fully charge them, and then restore the two units for normal use.

T Elf edition is intelligently paired and the one with the prompt tone is the left-hand channel which can be used separately for the main ear set,such as, driving and calling.

The two headsets are paired with different mobile phones and can be used separately.When two headsets are paired with the same mobile phone, the one with the prompt tone can be used alone.

When it Wearing Properly, It will not drop when exercising, and the sense of hearing is batter.

When the headset is fully charged in the charging box, it will reconnect automatically. if you do not want to reconnect it, you can tum off the mobile phone Bluetooth when charging, so as not to affect the alarm clock and other functions.

Instructions for use:

Power on: open the charging box cover or press and hold the multi-function button.
Power off: put the headset back in the charging box, close the lid or press and hold the multi-function button.
Bluetooth pairing: after the headset is turned on, start the phone Bluetooth and search ”T Elf’ and click on the connection.
Music control: click the multi-function button to control music pause/play.
Call control: click the multi-function button to answer/ hang up the call; long press the multi-function button to reject the call.
Last radial: press the multi-function key twice.
Voice assistant: press and hold the multi-function button for a second and release it when hearing “clanging•.

Charging
Headset charging: put the headset back in the charging box and close the lid. When charging, the charging box blue light is turned on, and when it is fully charged, the blue light is turned off.
Charging In the charging box: when charging, the green light of the charging box is turned on for long time, and the green light is turned off when it is fully charged.

The red light flashes on the charging box: it indicates that the battery is low and needs to be charged.

The left and right headsets clear the pairing information:
If only one headset has sound or the other headset is not connected, please make the following operations separately for the two headsets :

1. Press and hold the multi-function button until the headset is turned off.
2. Press and hold the multi-function button until the headset is turned on. When you hear the pairing tone, release the button, press the multi-function button for three times and the headset will automatically tum off.
3. Put the two headsets back into the charging box and close the box and clear the pairing information.
4. Open the cover of the charging box and activate the Bluetooth function of the mobile phone to make a pairing connection.

Technical Specifications
Bluetooth version: 5.0
Frequency range: 2.4 GHz-2.48 GHz
Support protocols: A2DP, AVRCP, HSP, HFP
Frequency response range: 20Hz-15KHz
Standby time: about 1000 Hours
Music/Call Time: About 7 Hours
Charging time: About 1 hour for earphone and 2.5 hours for charging case
Input voltage/current: 5V/>100mA
Output power: 7mW + 7mW

Contact Us
www.bluedlo.com
400-889-0123
[email protected]

USER MANUAL

Bluedio Speaker
Model: TS3

Welcome to your new Bluedlo Speaker
We appreciate your choice of Bluedio Speaker. Before use, please read this user manual carefully and keep for future reference.

Purchase verification
You can find the verification code by scraping the coating off the security label that is affixed to the original packaging. Enter the code on our official website: www.bluedio.com for purchase verification.

Learn more and get support
Welcome to visit our official website: www.bluedio.com;
Orto email us at [email protected];
Or to call us at 020-86062626-835.

Learn more and get support :

• DON’T use the speaker at a high volume for any extended period to prevent hearing damage.
• DON’T use the speaker while driving or in any environment requiring your full attention. If necessary, use Bluedio communication headsets.
• Keep the speaker, accessories and packaging parts out of reach of children to prevent accidents and choking hazards.
• DON’T expose the speaker to either extremely high or low temperatures (ideal: 10’C to 35°C}.
• Removal of the chargeable battery in the speaker shall be conducted only by a qualified professional.
• DON’T try to replace the battery on your own.
• If the speaker has incompatible issues with your laptop or desktop, please use the included audio cable to connect; Or buy a CSR4.0 and above Bluetooth adapter.

Speaker overview :

In The Box

MF button

• When the speaker is off, press and hold the MF button until you hear “Power on”, then the speaker is on pairing mode;
• When the speaker is on, press and hold the MF button until you hear ‘”Power off’, then the speaker is off.
• When playing music in Bluetooth mode, press the MF button once to Pause/Play;
• Receiving an incoming call, press the MF button once to Answer/End; Press and hold for 2 seconds to refuse;
• Press the MF button twice to redial the last number.

Bluetooth pairing

• Make the speaker enter pairing mode (see instruction “MF button”), and turn on the Bluetooth feature of your phone, select ‘”TS3″; you will hear “Connected” after successfully paired. Next time just turn on the speaker and the Bluetooth feature of your phone, it will automatically connect to your phone.
• Note: If pairing is not successful within 3 minutes, please repeat above steps to pair again.

Volume – / previous track
Press once to reduce the volume; press and hold to skip to the previous track.

Volume + / next track
Press once to increase the volume; press and hold to skip to the next track.

Micro-SD card mode/Bluetooth mode
Insert the Micro-SD card; in Bluetooth mode, press the mode button once, when you hear “SD card music•, then it’s in Micro-SD card mode; press the mode button once again, it will switch back to the Bluetooth mode and you will hear ‘”Bluetooth music”.

EQ button
Press the EQ button once to change EQ.

Line-In music playback(Lina-In mode)
To enter line-in mode: use the included 3.5mm audio cable to connect TS3 with your mobile phone or computer. Pressing the mode button once can switch to Bluetooth mode or Micro SD card mode.
Note: Tum on the speaker before using this feature.

File transfer
When your speaker is off, insert a Micro SD card into the speaker, then connect it to your computer via USB charging cable, you can transfer files between the Micro SD card and your computer.
(We suggest you load audio files into the Micro SD card with a card reader first, then insert the Micro SD card into the speaker for Micro SD card music playback.)

Factory reset
Use a needle to keep pushing the reset key for about 2 seconds can realize factory reset.
Note: This operation will reset all settings; please use with caution.

Charge the battery

• Connect the speaker to a power source with the included USB charging cable. While charging, the red light stays on. After fully charged, the blue light will stay on.
• When the red light is flashing, the battery is low. You need to charge the battery.
• Tum off the speaker before charging, and a 5V/1A phone charger is recommended.

Specifications :

• Bluetooth version: 4.2
• Bluetooth transmission frequency: 2.4GHz to 2.48GHz
• Bluetooth profiles: A2DP, AVRCP, HSP, HFP
• Frequency response: SOHz-20,000Hz
• Audio input: S:1Vrms
• Bluetooth operating range: up to 33 feet (free space)
• Micro-SD card capacity: maximum 32G
• Supported music formats: WMA, APE, FLAC, WAV, MP3
• Input voltage/current: 5V/1A
• Standby time: about 1000 hours
• Bluetooth music/talk time: 5-6 hours
• Charging time: 5-6 hours
• Output power: 2*2W+5W (left and right channels+ bass}

Specifications are subject to change without notice.

This speaker has its specialized APP. Please turn to page 33, and use your phone to scan the QR code to download. Consult our customer service for more information .

USER MANUAL

Bluedio Headphones
Model: Vinyl

Welcome to your new Bluedio headphones
We appreciate your choice of Bluedio headphones. Before use, please read this user manual carefully and keep for future reference.

Purchase verification
You can find the verification code by scraping the coating off the security label that is affixed to the original packaging. Enter the code on our official website: www.bluedio.com for purchase verification.

Learn more and get support
Welcome to visit our official website: www.bluedio.com, Or to email us at [email protected]: Or to call us at 020-86062828-835.

Important Safety Information

• DON’T use the headphones at a high volume for any extended period to prevent hearing damage.
• DON’T use the headphones while driving or in any environment requiring your full attention. If necessary, use Bluedio communication headphones.
• Keep the headphones, accessories and packaging parts out of reach of children to prevent accidents and choking hazards. • STOP using the headphones immediately if you feel sick while using the headphones.
• DON’T expose the headphones to either extremely high or low temperatures (ideal: 10°C to 35.C).
• Always keep the headphones dry and DON’T use the headphones near water.
• Removal of the chargeable battery in the headphones shall be conducted only by a qualified professional. DON’T try to replace the battery on your own.
• If the headphones have incompatible issues with your laptop or desktop, please use the included audio cable to connect; or buy a CSR4.0 and above Bluetooth adapter.

In the Box

Headphones Overview

Slide switch:
Push the Slide Switch to turn on/off Vinyl, and it will emit “Power On”/”Power Off “.

MF button:

• When playing music, press the MF button once to Pause/Play;
• Receiving an incoming call, press the MF button once to Answer/End; Press and hold for 2 seconds to refuse;
• Receiving Call 2 in Call 1, press and hold the MF button to hold on Call 1 and answer Call 2; press and hold again to switch back to Call 1; press once to end the call;
• Press the MF button twice to redial the last number.

Volume- button :
• Press once to reduce the volume; press and hold to skip to the previous track.

Volume+ button :
• Press once to increase the volume; press and hold to skip to the next track.

Turn on/off the 3D sound
ON: press the MF button and Volume+ button once together;
OFF: press the MF button and Volume- button once together

Bluetooth pairing :
Push the Slide Switch to turn on Vinyl, and turn on the Bluetooth feature of your phone; select “VINYL”; you will hear “Connected” after successfully paired.

Note: If pairing is not successful within 3 minutes, please repeat above steps to pair again.

Connect to two mobile phones via Bluetooth :

1. Connect Vinyl with phone 1, then turn off Vinyl and the Bluetooth feature of phone 1.
2. Turn on Vinyl and connect it with phone 2.
3. Turn on the Bluetooth feature of phone 1, select °VINYL” in the Bluetooth list.

Line-in music playback :
Use the standard 3.5mm audio cable to connect the headphones with your mobile phone and computer.
Note: Turn off the headphones before using this feature.

Line-out music playback :
When playing music via Bluetooth, use the 3.5mm audio cable to connect Vinyl with other headphones or speakers.

Clear the pairing memory :
Turn on Vinyl, when you hear “Pairing”, press the Volume + and Volume – buttons once together.

Specifications :

• Bluetooth version: 4.1
• Bluetooth operating range: up to 33 feet (free space)
• Bluetooth transmission frequency: 2.4GH. to 2.48GHz
• Bluetooth profiles: A2DP, AVRCP,HSP, HFP
• Audio resolution: 24bit@48KHz
• Drivers: (I)57mm • Impedance: 160
• Frequency response: l5Hz-25,000Hz
• Sound Pressure Level (SPL): 116dB
• Total Harmonic Distortion (THD): <0.1%
• Standby time: about 1100 hours
• Bluetooth music/talk time: about 20 hours
• Charging time: 2 hours for full charge
• Operating temperature range: -10°C to 50°C only
• Charging voltage: 5V
• Current: s500mA
• Power consumption: 137mw

USER MANUAL

Bluedio Headphone
Model: Faith 2

Welcome to your new Bluedio headphones
We appreciate your choice of Bluedlo headphones. Before use, please read this user manual carefully and keep for future reference.

Purchase verification
You can find the verification code by scraping the coating off the security label that is affixed to the original packaging. Enter the code on our official website: www.bluedio.com for purchase verification.

Learn more and get support
Welcome to visit our official website: www.bluedio.com; Or to email us at [email protected]; Or to call us at 020-88062628-835.

Important Safety Information

1. Don’t use the headphones at the high volume for any extended period to prevent hearing damage.
2. DON’T use the headphones while driving or in any environment requiring your full attention. If necessary, use Bluedio communication headphones.
3. Keep the headphones, accessories and packaging parts out of reach of children to prevent accidents and choking hazards.
4. STOP using the headphones immediately if you feel sick while using the headphones.
5. DON’T expose the headphones to either extremely high or low temperatures (ideal: 10°C to 35°C).
6. The headphones have ANC (Active Noise Cancellation) function; please use it in safe environment, such as public transportation and noisy office, instead of the road to avoid accidents.
7. Removal of the chargeable battery in the headphones shall be conducted only by a qualified professional. DON’T try to replace the battery on your own.
8. If the headphones have incompatible issues with your laptop or desktop, please use the Included audio cable to connect; Or buy a CSR4.0 and above Bluetooth adapter.

In the Box

Headphone Overview

Power on:
When the headset is off, press and hold the MF button until you hear “Power on”, and you will one the blue light blinks. Note: The ANC function must be turned off before turning on the headphone under Bluetooth mode.

Power off:
When the headset is on, press and hold the MF button until you hear “Power or. Pairing: When the headset is off, press and hold the MF button until you hear “Ready to pair”, and you will one the blue light stays on.

Answer/Reject phone calls:
Receiving an incoming call, press the MF button once to Answer; press once again to End; Press and hold for 2 seconds to refuse.

Switch phone calls:
Receiving Call 2 in Call 1, press and hold the MF button to hold on Call 1 and answer Call 2; press and hold again to switch back to Call 1; press once to end the call.

Radial the last number:
Press the MF button twice to redial the last number.

Music control
When playing music, press the MF button once to Pause/Play.

Bluetooth pairing:
Make the headset enter pairing mode (see instruction “Pairing”), and tum on the Bluetooth feature of your phone, select ‘Bluedio F”; you will hear “device connected” after successfully paired.
Note: If pairing is not successful within 2 minutes, please repeat above steps to pair again.

Volume- button
Press once to reduce the volume; press and hold to skip to the previous track.

Volume+ button
Press Once to increase the volume; Press and hold skip to next track.

ANC switch
Push the ANC switch to turn on/off the ANC function; when it’s on, the green light will stay on.

Note:

1. When connecting the audio cable, push the ANC switch, the ANC function will take effect after about 3 seconds.
2. When the headphone is in low battery state or the voltage less than 3V, the ANC indicator will go out and the ANC function takes no effect. In this situation, the headphone must be charged.
3. If you activate ANC function before turning on the headphone, the headphone will be switched to Line-in mode automatically, at which time the headphone can not be turned on.

Language selection:
Turn on the headset first, then press the MF button and the Volume- button once simultaneously to select English/Chinese/ French/Spanish.

Connect to two mobile phones via Bluetooth:

1. Connect the headphones with phone 1, then turn off the headphones and the Bluetooth feature of phone 1.
2. Turn on the headphones and make it enter pairing mode.
3. Connect the headphones with phone 2.
4. Turn on the Bluetooth feature of phone 1, select ‘Bluedio r in the Bluetooth list.

Line-In music playback:
Use the standard 3.5mm Type-C audio cable to connect the headphones with your mobile phone and computer.
Note: Turn off the headphone befor using this feature.

Line-out music playback:
Connect the headphones with your mobile phone via Bluetooth first, then use the 3.5mm Type-C audio cable to connect the headphones with other headphones.
Note: Turn off the ANC function before using this feature.

Charger and battery
Charging cable: please use the Included Type-C charging cable to charge the battery, or it may damage the headphones.
USB wall Charger: if using a USB wall charger, the output requires 5VDC, > 0.5A.

Charge the headphones
The built-in battery is rechargeable and non-detachable. Don’t try to replace the battery on your own. Turn off the headphones before charging.
Use the included Type-C charging cable to connect the headphones with a computer or wall charger. While charging, the red light stays on.
Allow 1.5 hours for a full charge. Once fully charged, the blue light will stay on.

Specifications:

• Bluetooth version: 4.2
• Bluetooth operating range: up to 33 feet (free space)
• Bluetooth transmission frequency: 2.4GHz to 2.48GHz
• Bluetooth profiles: A2DP, AVRCP, HSP, HFP
• Audio resolution: 24bit@46KHz • Drivers: c•57mm
• Impedance: 160
• Frequency response: 15Hz-25,000Hz
• Sound Pressure Level (SPL): 116dB
• Standby time: about 650 hours
• Bluetooth musicltalk time: about 16 hours
• Bluetooth music/talk time under ANC: about 16 hours
• Pure ANC time: about 16 hours
• Charging time: 1.5 hours for full charge
• Operating temperature range: -10°C to 50°C only
• Charging voltage/current: 5V/ s 500mA
• Output power: 25mWi-25mW

Specifications are subject to change without notice.