• Fixed Face
• LCD Display
• “Ultra Memory” To retain preset settings after battery is disconnected
• Illuminated Controls
• ISO DIN Mounting
• ISO Wiring Harness
• 12/24 Volt DC
• Clock
• Speaker Impedance 4-8 Ohm
• Max Power 20 Watts x 4
• Dimensions: 178(W) x 50(H) x 180 (D)
• -15° ~ 60° Working Temperature

• USB: Front
• SD / MMC Card Port: Front
• 6.3mm Mic Jack: Front & Rear
• 2 CH RCA PreOut
• 2 x RCA Video Out: Rear
• 7 OSD Language Selection (Via Video Out)
• AUX In: Front

• PLL Synthesized AM/FM Stereo
• Long Range Tuner
• FM 87.5-108 MHz: AM 522-1620 KHz
• Interference Absorption Circuit
• 30 Station Presets – 18 FM/12 AM
• Station Seek
• Automatic or Manual Tuning

• Front & Rear 6.3mm (1/4”) Microphone Jack
• Auto Mic mode when Microphone is turned on (Mic dependent)
• Compatible with most Microphones (optional MIC01)

• Supports DVD (All Regions) VCD/CD
• PAL / NTSC Video System (Switchable)
• Auto Loading
• Electronic Shock Protection

• Bluetooth in Phone Mode
• External Microphone
• Audio Streaming

• Rotary Encoder
• 4 EQ Presets
• Electronic Volume / Balance / Bass / Treble
• Loud / Mute

• External Handsfree Microphone
• ISO Wiring Harness
• Installation Hardware
• Remote Control

Due to improvements in technology and design, specifications are subject to change without notice.
Made in China

audioxtra.com.au

JS043K
REARVIEW MIRROR MONITOR/CAMERA SYSTEM
INTEGRATED 4.3″ DISPLAY CLIP ON STYLE

SPECIFICATIONS

INSTALLATION MANUAL

REARVIEW MIRROR MONITOR CAMERA SYSTEM

GENERAL:
This rearview system discreetly clips over the existing mirror of the vehicle and automatically activates the mini camera when reverse gear is selected. This provides a clear image for the driver and protects children, pedestrians, etc from injury, and avoids costly repairs for dents and other damage when reversing. A second Video Input allows a second camera or input for multimedia/navigation/DVD.

CAMERA:

The DUAL HEAD system included with your purchase allows for flexible installation options, either surface mount (eg number plate or boot lid) or stealth insert mount (eg humper). The video cable simply connects with the mirror monitor supplied. A second camera or multimedia source can also be added.

CAUTION: Carefully check the +/- wiring sequence during installation. Ensure safety when installing wires near the fuel tank.

1. V1/V2 – Change between the two camera inputs
2. Up Arrow – Increase value
3. Menu – Press to open the menu;
   Press repeatedly to select different options to adjust with the up and down arrows
4. Down Arrow – Decrease vaiue
5. Power – Turn the screen on and off

INSTALLATION:

MONITOR INSTALLATION

1. Simply clip over the original mirror
2. Carefully run wiring loom around windscreen or hood lining
3. Connect camera extension cable (RCA M) to Video 2
4. Connect RED cable to 12V+
5. Connect BLACK cable to ground
6. Connect GREEN cable to Reverse Light 12V+
7. Carefully insulate all connections to avoid short circuits

CAMERA INSTALLATION

1. Determine installation location (usually the centre-rear of vehicle)
   a) Butterfly Type – Mount on surface using double-sided tape or screws
   b) Insert Type – Carefully drill hole (hole saw supplied) in bumper and insert camera
2. Connect RED cable to 12V+ power cable of Reversing Light circuit
3. Connect BLACK cable to ground
4. Connect signal extension cable
5. Connect RCA (Yellow) video cable to LCD monitor

CAMERA ASSEMBLY OPTIONS:

The JS043K Camera is supplied with Dual Mounting Heads:
See diagram below:

CABLE CONNECTIONS:

See wiring diagram below:

MIRROR MONITOR CONNECTIONS:

See wiring diagram below:

WARRANTY

Congratulations on your purchase of a quality Mobile Safety System! You’re joining thousands of satisfied customers who enjoy & experience the benefits of the products we distribute. In the unlikely event that some technical difficulty arises with your purchase, be assured that we are most anxious to see that the problem is quickly rectified to your satisfaction. Please familiarise yourself with the following simple conditions of our warranty.

This warranty covers faults through component failure or failure of the product to operate in accordance with published specifications. Product failure as a result of unreasonable environmental conditions, accident, misuse, improper installation, unauthorized repair, vehicle electrical or wiring faults or neglect etc, will not be covered by this warranty. Removal and installation costs, if any, would be paid by the owner as well as any freight or postage costs of transporting the product to AudioXtra. AudioXtra shall not be liable or responsible for any loss of use of this product or any form of consequential loss.

CONSUMER WARRANTY
This product is warranted by Audioxtra International Pty Ltd to be free from defects in materials and workmanship under NORMAL USE for a period of TWENTY FOUR MONTHS from the date of purchase.

WITHIN 30 DAYS OF PURCHASE DATE: Please retum the unit for a replacement to our National Service Centre or the Retailer from where you made the purchase. All accessories must be included. Proof of purchase date must accompany the products.

AETER 30 DAYS OF PURCHASE DATE: Warranty repair and service is carried out by our National Service Centre. Repair and service will be carried out at no cost to the owner if proof of ownership and the date of purchase can be verified to the satisfaction of the authorised centre concerned with this repair. This proof should take the form of either:
a) The warranty card accompanying this product, stamped and dated by the dealer.
b) A Tax Invoice or Receipt showing full details of original vendor, purchaser, model number and serial number.

COMMERCIAL WARRANTY: A product used in or associated with a commercial application will carry a limited SIX MONTH warranty. An abnormal commercial application is one where usage, dust, vibration, heat/cold and other environmental conditions exist at an extreme level.

Our goods come with guarantees that cannot be excluded under the Australian Consumer Law. You are entitled to a replacement or refund for a major failure and for compensation for any other reasonably foreseeable loss or damage. You are also entitled to have the goods repaired or replaced if the goods fail to be of acceptable quality and the failure does not amount to a major failure.

Please complete details below in the event of warranty service being required.
PurchasersName:_____________________________________________________________
Purchaser’s Address: __________________________________________________________
__________________________________________________________________________
Model Number:  JSO43K  SerialNumber. _________________________________________
DealerName: ________________________Date of Purchase: _________________________
Dealer Address: _____________________________________________________________
Invoice/Sales Docket no: ______________________________________
General Hints: To expedite service and prompt retum of the equipment, please:
a) Clearly describe the fault in detail
b) Safety and security pack the unit for transport
c) Include your return address
d) Provide proof of purchase date as outlined above

National Service Centre:
10 STODDART ROAD, PROSPECT, SYDNEY NSW 2148 Australia
Telephone: (02) 8841 9000 Fax: (02) 9636 1204
email: services@audioxtra.com.au

www.audioxtra.com.au 

axis AX1805BT LCD Multimedia Receiver Instruction Manual

SPECIFICATIONS

GENERAL

• 3 Inch LCD
• Fixed Face Panel
• Illuminated Controls
• 12/24 Volt DC (10.8 – 32V)
• Ultra Memory
•  Digital Clock
•  Dimensions: 178W x 50H x 88D mm (Chassis) 188W x 58H x 20D mm (Front Panel)

AUDIO

• 4 x 45W Max Power
•  EQ Presets
• Loud/Mute
• Telemute
• 4-8 Ohm Speaker Impedance
• 2CH RCA Pre-Out

MULTIMEDIA

• 1 x USB Input (2A Charging) (Front) MPEG5 Audio/Video Playback Up to 64GB Support
• 1 x 3.5mm Aux-In (Front)
• 1 x A/V Input
• 1 x Camera Input
• 2 Video Output

TUNER

•  PLL Synthesized AM/FM Stereo
•  ELITE Tuner (FM 87.5-108 MHz; AM 522-1620 Khz)
• Interference Absorption Circuit
• 30 Station Presets (18 FM, 12 AM)
• Mono/Stereo

BLUETOOTH

• Hands Free
•  A2DP Audio Streamin
•  Internal Hands Free Microphone

INCLUDED

•  ISO Wiring Harness

Installation

Please read these instructions carefully before operating the unit.

ATTENTIONS OF INSTALLATION

1. This player should be installed by a professional technician.
2. Please read instructions carefully before installing.
3. Please ensure all wires are connected before powering unit on.
4. To avoid short circuit, please ensure all exposed wires are insulated.
5. Please secure all wires after installation.
6. Please ensure connections made are as per directions in this instruction manual. Wrong connection may cause damage to the unit.
7. Please connect the wires correctly. Wrong connection will cause malfunction or damage the electrical system.

INSTALLING THE UNIT

1. Dashboard
2. Sleeve tab to bend

REMOVING THE UNIT

Insert the keys supplied into both sides of the unit until they click. Pull the keys to remove the unit from the dashboard.

WIRING CONNECTION

• ISO
  

Optional

1. Do not connect the terminals of the battery until the player is installed.
2. Please connect the yellow wire to the positive of the battery (+).
3.  When changing the fuse, ensure the new fuse specification is the same as the current.

OPERATION

LOCATION OF KEYS

1. 1
2. MUTE/POWER ON/OFF
3.  MENU
4. 2 INTRO
5. 3 REPEAT
6.  Seek Down Button
7.  VOL/PUSH/ENT/SEL
8.  BAND/Video Out On/Off
9. TFT SCREEN
10. USB
11. AUX IN
12.  MIC
13.  Seek up button
14. MODE
15. 6/10+ Seconds
16.  5/10- Seconds
17.   4/RANDOM
18. RESET

Key functions

KEYS	ACTION	RADIO	USB/SD	AUX	BT
POWER/ MUTE	Short	Power on / Mute on/off	Power on / Mute on/off	Power on / Mute on/off	Power on / Mute on/off
	Long	Power off	Power off	Power off	Power off
MENU	Short	Main menu	Main menu	Main menu	Main menu
	Long		file search
MODE	Short	source change	source change	source change	source change
	Long	BT off/link	BT off/link	BT off/link	BT off/link
BAND	Short	band change	Music/Photo/Video switch
	Long	Auto store	Video Out/3 inch display
I<<	Short	Seek down	previous file		previous file
	Long	Manual turn down	FR
>>I	Short	Seek up	next file		next file
	Long	Manual turn up	FF
1/	Short	Preset 1 recall / Answer call	Answer call / Play/Pause	Answer call	Answer call / Transfer Play/Pause
	Long	Save station    to P1
2/INT	Short	Preset 2 recall /	Reject call / INT on/off	Reject call
	Long	Save station to P2
3/RPT	Short	Recall preset 3	Repeat on/off
	Long	Save station to P3
4/RDM	Short	Preset 4 recall / Reject call	Random on/off / Reject call	Reject call	Reject call / finish call
	Long	Save station to P4
5/10-	Short	Preset 5 recall	-10 skip
	Long	Save station to P5
6/10+	Short	Preset 6 recall	+10 skip
	Long	Save station to P6
VOL	Rotary	Volume +/-	Volume +/-	Volume +/-	Volume +/-
SEL (push VOL)	Short	BAS/TRE/BAL/FAD/EQ /LOUD	BAS/TRE/BAL/FAD/EQ /LOUD	BAS/TRE/BAL/FAD/EQ /LOUD	BAS/TRE/BAL/FAD/EQ /LOUD
	Long	P-VOL/CT/ST/LOC	P-VOL/CT	P-VOL/CT	P-VOL/CT

Basic Operation

Turn on/off the unit and MUTE function
Press /MUT button to turn on the unit. When the unit is on. Shortly press this button for mute on/off. Press and hold it for 2 seconds to turn off the unit.

Audio setting menu adjustment
Repeatedly press VOL knob for the audio menu:
BAS(Bass)-TRE(Treble)-BAL(Balance)-FAD(Fader)-EQ-LOUD
Press and hold VOL knob for the setting menu: P_VOL-CT(INDEP/SYNC)-ST/MONO-DX/LOC In each item rotating VOL knob to set them.

Switch source
Shortly press MODE button to change source. Also shortly press MENU button and rotating the VOL knob to select other source or settings then press VOL knob.

Main menu adjustment
Shortly press MENU button and rotating the VOL knob to select SETTINGS then press VOL knob.
There are below items:
Language-Radio Area-Time-Time mode-Date-PAL/NTSC-Led Color-Video Warning-Factory default -Version In each item rotating VOL knob to set them.

Reset the unit
Press RESET button to reset the unit. It is activated for the following reasons:

1. Some buttons do not operate.
2. Error symbol shows on the display.

Note: if the RESET function is activated. All the memory will be lost.

There is a “Factory default” item in settings menu. To active it. You also can make all data back to the factory setting.

Radio Operation

Receive a radio station
In RADIO source press BAND button to select desired band. Shortly press / button to receive the desired radio station. Press and hold / button for manual tuning the frequency.

Auto Store:
Press BAND button for 2 seconds to auto store stations to band 1~3.

Manually store station & recall preset station
Tuning to a station with or button. Press and hold one of the 1- 6 preset button for 2 seconds. The current station is stored into the number button. Shortly press the preset button (1~6) to directly listen the station that saved in the corresponding preset button.

USB Operation

When an USB driver inserted to the unit, the unit will play the MP3/WMA file automatically. If an USB drive is already inserted in the unit. Keep pressing MODE button shortly until the USB mode display appears.

Select file
Press / button to skip to next/previous file. Hold  / button to fast forward or fast reverse.

Play/Pause
Press button to pause/playing the file.

INT function
Press INT button to play the first 10 seconds each file. Press it again to cancel this function.

RPT function
Press RPT button to select repeat mode: RPT ONE / RPT ALL (default).

Random function
Press RDM button, all files will be played randomly. Press it again to cancel this function.

+10/-10 file skip
Press 5/-10 button to skip back 10 file playing. Press 6/+10 button to skip forward 10 file playing.

Search song
Press and hold MENU button for 2 seconds. It will list all the songs on the display. Press and hold
MENU button for 2 seconds again. It will return to the parent directory. Using VOL+/-button to select the desired folder/song then press VOL knob to enter/play.

Video/Photo/Music changing
Way 1: Shortly press BAND button to change Video/Photo/Music mode.
Way 2: Press and hold MENU button for 2 seconds. It shows the file search screen. Press I<< button.
One of the MUSIC/VIDEO/PHOTO symbol will be active. Rotating VOL knob to desired symbol.
Press >>I button switch to the right side. Rotating VOL knob to select folder /file then press VOL knob to play.

AV IN operation
Connecting the Audio and Video signal to the RCA connecters (L-IN/R-IN/V-IN) behind the unit.
Then press MODE button to switch to AV IN mode. (Note: BRAKE wire needs to be connected to ground.)

AUX operation
Connecting a audio signal (from a player) to the 3.5mm jack of front panel. Then press MODE button to switch to AUX mode.

Camera in operation
Connecting the camera signal to RCA “CAMERA” connecter behind the unit. When “BACK SIGHT” wire is connected to ground. It will switch to Camera mode.

Tele-mute operation
When “TEL-MUTE” wire is connected to ground. The sound of speakers will be muted. When “TEL-MUTE” wire is disconnected to ground. The sound of speakers resumes.

Bluetooth Operation

PAIRING

On your mobile phone, turn, no Bluetooth and search for Bluetooth devices. “CAR-BT” should appear in the list and select.
Enter the password “0000” if needed.
When successfully paired, the BT icon will be on the display.

BLUETOOTH AUDIO

Press MODE button to switch to BT mode. Music on your mobile phone will automatically play.
Press >II key to pause/Play the song. Press >>I or I<< button to select the next of previous song.

BT CALLING

When there is an incoming call, press the Phone answer icon to answer the call.
Press the phone hang-up icon to reject or end the call.

DISCONNECT BLUETOOTH

To disconnect the bluetooth, press and hold the MODE button for 2 seconds. Repeat to re-connect.

TROUBLE SHOOTING

GENERAL

Power Supply Requirements: DC 10-32 Volts, Negative
Chassis Dimensions: Ground : 178 (W) x 97 (D) x 50 (H)

Tone Controls

• Bass (at 100 Hz) : ±10 dB
• Treble (at 10 kHz) : ±10 dB
• Maximum Output Power @32V : 4 x 45 watts
• Current Drain : 5 Ampere (max.)

TROUBLE SHOOTING
Before going through the checklist below, check the wiring connection. if any of the problems persist after checklist has been made,consult your nearest services dealer.

WARRANTY

Congratulations on your purchase of a quality axis Mobile Entertainment System! You’re joining thousands of satisfied customers who enjoy & experience the benefits of the products we distribute. In the unlikely event that some technical difficulty arises with your purchase. be assured that we are most anxious to see that the problem is quickly rectified to your satisfaction. Please familiarise yourself with the following simple conditions of our warranty. This warranty covers faults through component failure or failure of the product to operate in accordance with published specifications. Product failure as a result of unreasonable environmental conditions. accident, misuse, improper installation. unauthorised repair. vehicle electrical or wiring faults or neglect etc, will not be covered by this warranty. Removal and installation costs, if any, would be paid by the owner as well as any freight or postage costs of transporting the product to AudioXtra. AudioXtra shall not be liable or responsible for any loss of use of this product or any form of consequential loss.

CONSUMER WARRANTY

This product is warranted by AudioXtra Ply Ltd to be free from defects in materials and workmanship under NORMAL USE for a period of TWENTY FOUR MONTHS from the date of purchase.

WITHIN 30 DAYS OF PURCHASE DATE- Please return the unit for replacement to our National Service Centre or the Retailer from where you made the purchase. All accessories must be included. Proof of purchase date must accompany the products.

AFTFR 30 DAYS OF PURCHASE DATE. Warranty repair and service is carded out by our National Service Centre. Repair and service will be carried out at no cost to the owner if proof of ownership and the date of purchase can be verified to the satisfaction of the authoriser’ centre concemed with this repair. This proof should take the form of either a) The warranty card accompanying this product. stamped and dated by the dealer. b) A Tax Invoice or Receipt showing full details of original vendor. purchaser. model number and serial number.

COMMERCIAL WARRANTY

A product used in or associated with a commercial application will carry a limited SIX MONTH warranty. An abnormal commercial application is one where usage. dust. vibration, heatfoold and other environmental conditions exist at an extreme level.

Our goods come with guarantees that cannot be excluded under the Australian Consumer Law. You are entitled to a replacement or refund for a major failure and for compensation for any other reasonably foreseeable loss or damage. You are also entitled to have the goods repaired or replaced if the goods fail to be of acceptable quality and the failure does not amount to a major failure.

Please complete details below in the event of warranty service being required.

Purchase’s Name:____________________________
Purchase’s Address:_____________________________________________

Model Number: AX1805BT .Serial Number:___________________
Dealer Name:________________________ Date of Purchase:      /      /
Dealer Address: ________________________________________________

Invoice/Sales Docket no: _______________________

General Hints: To expedite service and prompt return of the equipment, please:

1. Clearly describe the fault in detail
2. Safety and security pack the unit for transport d) Provide proof of purchase
3. Include your return address
4. Provide proof of purchase date as outlined above

National Service Centre

Address : 10 STODDART ROAD, PROSPECT, SYDNEY NSW 2148 Australia
Telephone: (02) 8841 9000
Fax: (02) 9636 1204
email: services@audioxtra.com.au

axis AX1511 10.1 inch Flip Down LED Monitor with Built-in DVD

The AX1511 is a premium roof mount DVD multimedia system. This package comes complete with side loading DVD player and innovative features including USB, SD input, headphone jack & 8 Channel FM Modulator to reproduce the audio through your vehicle’s sound system. Keeping all your passengers entertained on the road has never been so quick, easy and enjoyable!

• 1080P Decoding
• FM Modulator
• On-Board Speakers

INCLUDED IN BOX

• Full Function Remote Control
• Installation Hardware
• Installation Manual

SPECIFICATIONS

• GENERAL
  • 10.1 Inch (25.7cm) LED-TFT Monitor
  • 1080P Decoding
  • 1024(W) x RGB x 600(H) Resolution
  • LED Backlight
  • 16:9 Screen Format
  • PAL/NTSC Auto Colour System
  • AV Input (Rear)
  • AV Output (Rear)
  • Video Input (Side Panel)
  • Headphone Jack
  • IR Transmitter (2 CH for Wireless Headphones)
  • Wireless FM Modulator (8 CH for Audio Output)
  • Function Buttons on Front Pod
  • Built-In Dome Lights
  • On-Board Stereo Speakers
  • Universal Installation
  • 12V (10~14V) DC Input / Negative Ground
  • -10° to +60°C Operating Temperature
  • 300(W) x 253(L) x 55(H)mm Dimensions (when closed)

• DVD/CD PLAYER/MULTIMEDIA
  • DVD/CD/MP3/WMA/MPEG2/MPEG4/MKv/H.264/AVS/VCI/RM/RM8/AVI/VP6/VP8 Playback Systems
  • USB 2.0 Port
  • SD/MMC/MS Card Reader

audioxtra.com.au