Bluetooth controller User Manual

Brief Description

This controller support IOS 6.0 version and Android version 4.3 above. It can achieve remote control ,switch light, adjust brightness, CT, Dimmer, music and timer functions. There are 16 million colors and dozens of light changing modes. In addition. This controller is designed for LED strips, module etc. After easy installation and settings, you can use your Phone (IOS 6.0 or Android 4.3 version or above) to control. It can be used widely in bedroom ,living room ,entertaining place and operating atmosphere etc.

Technical Specification

Suitable Phone OS: IOS version 6.0 above or Android 4.3 version above.
Group control quantity: 8-10 lamps (Router can only connects lights)
Software language: English , Chinese, automatic recognize language according to OS.
Working Temperature: -20℃-60℃
Working Voltage: DC: 5V-24V
Output channel: 3CH/RGB,2CH/WC,CC, 1CH/DIM
Effective Remote Distance: it will depends on the router signal transmission

Software application

1. First Bluetooth lamp plugged in, turn on the Bluetooth mobile phone (Settings -> Bluetooth), enter LedBle software automatically scans all Bluetooth devices and automatically connect the device
2. The system default has a total of packet, the user can customize the group, in the group switch is closed, click on the group will enter the search interface to list all devices. This interface can see the connection status of the Bluetooth device list and device, click Add a new group, the same device can be added to different groups, click unbind all equipment will lift the group Figure:
3. Click into the control interface
   Long press to modify the color or pattern
4. Long press DIY color and pattern can be edited
   Click the appropriate colors and modules, LED will display changes, the slider can adjust the brightness of the lamp：
5. Click into the built-in interface mode
   The following slider can adjust the speed and brightness; can adjust the speed of dynamic and static can only adjust the brightness：
   Click into User defined the interface
   you can customize the color and status and also adjust the speed
6. Click into DIM interface
7. Click into CT interface
8. Click into MUSIC interface
   Click Add Music, Click to select the output of light at different frequencies Click Edit color
   Here you can edit the output according to your color
   Click into Microphone interface
   Click the microphone output can be turned off
9. Click into TIMER interface
   Here you can set the opening and closing time of lamps, lighting and open state