anslut 008732 Work Lamp

SAFETY INSTRUCTIONS

• Do not look directly into the light when it is switched on.
• Never point the beam at the eyes of people or animals.
• Store out of the reach of children.
• Can be used indoors and outdoors, but do not immerse in water or any other liquid.
• Do not charge the product outdoors-this will not comply with protection rating IP65.
• Do not use the charger to charge other products.
• Only use the supplied charger to charge the lamp.
• The switch must be in the off position during charging, otherwise this can damage the light.
• Never cover the lens or reflector when in use.
• Do not attempt to replace the battery.
• The product must be discarded if the glass front is cracked.
• The LED light source is not replaceable. When the light source has reached the end of its useful life the complete product must be replaced.

SYMBOLS

TECHNICAL DATA

• Battery: 3.7 V/5000 mAh
• Output: 10/3 W
• Protection rating: IP54
• Luminous flux: 1000/220 Im
• Colour temperature: 6500 K
• Charging time: Approx. 4 h
• Run time: Max3/10 h
• Operating temperature: -10-40° C

DESCRIPTION

1. Car spotlight
2. Main spotlight
3. Charger stand
4. Micro USB port
5. Battery indicator
6. Hook (rotational 360° )
7. Micro USB port
8. Switch
9. Battery indicator
10. Magnetic mount (swivels 90°)

HOW TO USE

Press the switch to switch on and off. The following functions by pressing the switch:

NOTE:

• If the switch is not touched for 3 seconds the next time it is pressed will switch it off.
• Emergency function: when the emergency function is used the main spotlight will shine at 10% power.

CHARGING THE BATTERY

• The battery must be charged before using for the first time.
• Connect the USB charger to the power supply.
• Connect the charger cord to the micro USB port.
• The battery charge status is shown on the battery indicator. When all four battery charging lights go on the battery is fully charged.
• The battery should be changed every three months to maintain its capacity.