ANKER PowerCore Slim 10000 PD

ANKER PowerCore Slim 10000 PD

PowerCore Slim 10000 PD
For FAQs and more information, please visit:
anker.com/support

	@Anker @Anker Japan @Anker Deutschland
	@Ankerofficial @Anker_JP
	@Ankerofficial @Anker_JP

Product Number: A1244
External Battery / Portable Charger 51005002463 V03

Charging Your Phone or Tablet

Charging Your Bluetooth Earphones or Smart Watches

• Enter “trickle-charging” mode: Press the power button twice or press and hold for 2 seconds. The LED indicator will turn green.
•  Charge your devices recommended for smartwatches or Bluetooth earphones.
•  Exit “trickle-charging” mode: Press the power button once again.

Recharging Your PowerCore

Recharge your PowerCore via a PD charger ( not included).

Specifications

Important Safety Instructions

When using this product, basic precautions should always be
followed, including the following:

1. Store product in a cool and dry place.
2. Do not store the product in a hot or humid environment.
3.  Use of a power supply or charger not recommended or sold by the product manufacturer may result in a risk of fire or injury to persons.
4.  Operating temperature should be between 32°F to 95°F / 0℃ to 35℃.
5.  Do not disassemble the product. Take it to a qualified service person when service or repair is required. Incorrect reassembly may result in a risk of fire or injury to persons.
6.  If the product is not used for long periods of time, you should change and discharge once every three months.
7.  When charging a device, the product may feel warm, this is a normal operating condition and should not be cause for concern.
8.  In normal conditions, the battery performance will decline over several years.
9. Do not dispose of the product in heat or fire.
10.  Do not clean the product with harmful chemicals or detergents
11. Misuse, dropping or excessive force may cause product damage.
12.  When disposing of secondary cells or batteries, keep cells or batteries of different electrochemical systems separate from each other.
13.  Be aware discharged battery may cause fire or smoke, tape the terminals to insulate them.

This symbol indicates that this product shall not be treated as household waste. Instead, it shall be handed over to the applicable collection point for the recycling of electrical and electronic equipment.

CAUTION: Risk of explosion if the battery is replaced by an incorrect type.
WARNING: The batteries (battery pack or batteries installed) shall not be exposed to excessive heat such as sunshine, fire or the like. The extremely low air pressure may result in an explosion or the leakage of flammable liquid or gas.

FCC Statement

This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:

1. This device may not cause harmful interference.
2. this device must accept any interference received, including interference that may cause undesired operation.

Warning: Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.

Note: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation.

This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the  following measures:

1.  Reorient or relocate the receiving antenna.
2.  Increase the separation between the equipment and receiver.
3. Connect the equipment into an outlet on a circuit

Customer Service

	18-Month Limited Warranty
	Lifetime Technical Support
	[email protected]
	(US) +1 (800) 988 7973 Mon-Fri 9:00 – 17:00 (PT) (UK) +44 (0) 1604 936200 Mon-Fri 6:00 – 11:00 (GMT)

DOWNLOAD RESOURCES

• ANKER PowerCore Slim 10000 PD [pdf] User Manual PowerCore Slim 10000 PD
• Read more: https://manuals.plus/anker/powercore-slim-10000-pd-manual#ixzz7d7syftVp

FAQ’S

What is the difference between PowerCore Slim 10000 PD and PowerCore 10000 PD?

They are exactly the same, except for the color. The PowerCore Slim 10000 PD is black and silver, while the PowerCore 10000 PD is silver and black.

What is Anker’s 18-month warranty?

Anker stands behind its products with an 18-month warranty. During this period, if you encounter any problems with your Anker product, you’ll receive a replacement or refund for the cost of the product.

What does Anker’s 24-month warranty cover?

If you have any issues with your Anker product during the first 24 months after purchase, you can get it replaced or repaired. Please note that there are some exceptions to this rule which are stated in the warranty terms.

How do I request a replacement or refund for my Anker product?

If your product is defective or damaged during shipping, please contact us at [email protected] with your order number and a photo of the box and/or product. We will process your replacement or refund right away, free of charge. For all other cases, please visit help.anker.com for more information on how to return your item to us safely and easily.

How do I charge my PowerCore Slim 10000 PD?

Use the dual USB ports to charge two devices simultaneously. Rapid Recharge: Power up your PowerCore in just 4.5 hours with a USB-C Power Delivery wall charger (not included). Recharging via USB-A charger and cable (not included) will take approximately 10.2 hours.

Can I plug USB-C into PD?

This Power Delivery (PD) protocol was developed along with USB-C. USB-C is the physical port connection. This basically means that: Since the USB-C connector is reversible, it can be inserted into the port either way without having to flip it around just like Apple’s lightning connectors.

Can I use PD charger with any phone?

USB Power Delivery (or PD, for short) is a single charging standard that can be used all across USB devices. Normally, each device charged by USB will have their own separate adapter, but not anymore. One universal USB PD will be able to power a wide variety of different devices.

How many watts is the PowerCore Slim 10000?

Anker PowerCore Slim 10000 PD, 20W 10000mAh Power Delivery Power Bank, USB-C Portable Charger for iPhone 12/12 Mini/12 Pro/12 Pro Max, S10, Pixel 3, and More (Charger Not Include)

How do I know when my Anker PowerCore Slim 10000 is fully charged?

Once the power bank is fully charged, all four LEDs will shut off. A full charging cycle takes about 6-7 hours, depending on the chosen power source (e.g. 5V/2A power charger).

How long does the Anker PowerCore 10000 take to charge?

It can take 3-5 hours to fully recharge the Anker PowerCore 10000.

What do lights on Anker charger mean?

The light im referring to is when you hold down where it shows you how much charge is on the anker hold it down for about ten sec and it goes from white to green(1 answer) A: This makes it go into trickle-charge mode which means PowerCore Metro won’t turn off while charging low-power devices.

What happens if you overcharge a power bank?

Overcharging your power bank can cause battery damage, which results in inconsistent charging. Inconsistent charging means that your device will not charge correctly and may charge slower. If your power bank fails to charge correctly, you will also have to replace the device, leading to additional expense.

VIDEO

ANKER PowerCore Slim 10000 PD
www://anker.com/

ANKER PowerCore Slim

ANKER PowerCore Slim

POWER

CONNECTIONS AND BATTERY

When your PowerCore is fully charged, the LED indicators will turn off. DE: Das LED Licht erlischt, sobald Ihr PowerCore voll

Simultaneous charging and recharging are not supported.

Specifications

• Capacity: 10,000mAh / 37Wh
• Input:5 V= 2A
• Output: 5V= 2.4A
• Size: 149.5 x 68.5 x 14.5 mm
• Weight: 206.5 g

Important Safety Instructions

When using this product, basic precautions should always be followed, including the following:

1. Store product in a cool and dry place.
2. Do not store the product in hot or humid environments.
3. Use of a power supply or charger not recommended or sold by the product manufacturer may result in a risk of fire or injury to persons.
4. The operating temperature should be between 32°F to 113°F / 0 to 45.
5. Do not disassemble the product. Take it to a qualified service person when service or repair is required. Incorrect reassembly may result in a risk of fire or injury to persons.
6. If the product is not used for long periods of time, you should change and discharge once every three months.
7. When charging a device, the product may feel warm, this is a normal operating condition and should not be cause for concern.
8. In normal conditions, the battery performance will decline over several years.
9. Do not dispose of the product in heat or fire.
10. Do not clean the product with harmful chemicals or detergents.
11. Misuse, dropping, or excessive force may cause product damage.
12. When disposing of secondary cells or batteries, keep cells or batteries of different electrochemical systems separate from each other.

This symbol indicates that this product shall not be treated as household waste. Instead, it shall be handed over to the applicable collection point for the recycling of electrical and electronic equipment.

Notice

Declaration of Conformity

Hereby, Anker Innovations Limited declares that the product type A1229 is in compliance with Directive 2014/30/EU.
The full text of the EU declaration of conformity is available at the following internet address: https://www.anker.com Anker Innovations Limited Room 1318-19, Hollywood Plaza, 610 Nathan Road, Mongkok, Kowloon, Hong Kong

FCC Statement

This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.

Warning: Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.

Note: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation.

This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

1. Reorient or relocate the receiving antenna.
2. Increase the separation between the equipment and receiver.
3. Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
4. Consult the dealer or an experienced radio / TV technician for help.

The following importer is the responsible party. Company Name: Fantasia Trading LLC Address: 9155 Archibald Avenue, Suite 202, Rancho Cucamonga, CA, 91730, US Telephone: +1 (909) 484 1530

IC Statement

This device complies with Industry Canada license-ICES-003. Operation is subject to the following two conditions: (1) This device may not cause interference, and (2) This device must accept any interference, including interference that may cause undesired operation of the device.

Customer Service

18-month limited warranty*
Lifetime technical support

[email protected]

(US) +1 (800) 988 7973 Mon-Fri 9:00 am – 5:00 pm (PT)

Please note that your rights under applicable law governing the sale of consumer goods remain unaffected by the warranties given in this Limited Warranty.

For FAQs and more information, please visit:

• Product Number: A1229
• External Battery / Portable Charger
• 51005001663 V01

DOWNLOAD RESOURCES

• ANKER PowerCore Slim [pdf] User Manual PowerCore Slim 10000
• Read more: https://manuals.plus/anker/powercore-slim-manual#ixzz7dC6rVMTz

FAQ’S

How do you charge Anker PowerCore Slim?

Use the dual USB ports to charge two devices simultaneously. Rapid Recharge: Power up your PowerCore in just 4.5 hours with a USB-C Power Delivery wall charger (not included). Recharging via USB-A charger and cable (not included) will take approximately 10.2 hours.

How do I know if my Anker PowerCore Slim is charging?

Charging Your Bluetooth Earphones or Smart Watches
The LED indicator will turn green. Charge your devices recommended for smartwatches or Bluetooth earphones. Exit “trickle-charging” mode: Press the power button once again.

How do you know when Anker is fully charged?

The four LEDs indicate the charging progress. Once the power bank is fully charged, all four LEDs will shut off. A full charging cycle takes about 6-7 hours, depending on the chosen power source (e.g. 5V/2A power charger).

How do you turn off Anker PowerCore Slim?

You can press the LED and USB buttons to turn them on and off. but while either of them are on the device won’t turn off by itself. Press the USB and LED buttons until their lights are not switched on, wait for a while, and it should switch off automatically.

How do you reset Anker battery?

“use the included micro usb cable to connect the input and output port at the same time for 3-5 seconds to reset the battery and then recharge and discharge the battery again.

Can I use Anker PowerCore charger to charge my iPad?

No, it is not compatible.

Can you overcharge Anker PowerCore?

Overcharge is impossible. Your phone was designed to be plugged into a wall charger continuously.

How long does it take to charge a Anker power bank?

High-Speed Charging: PowerIQ and VoltageBoost combine to deliver the fastest possible charge(does not support Qualcomm Quick Charge). Recharges itself in 10 hours with a 2 amp charger, phone chargers (generally 1 amp) may take up to 20 hours.

What is the button on the side of the Anker charger?

Now it only charges the one thing at once but it’s really small and will charge your device up to about 3 times so if you’ve got an iPhone or an Android phone. About. Three times and it will fully.

Does the Anker PowerCore charger come with a cable?

Yes, the charger comes with a cable.

What happens if you drop a power bank in water?

Power banks and water do not work well together. If power banks get wet, there’s a chance they can short-circuit, which can cause damage to other electronics that you plug into them or even cause an electric shock in some extreme circumstances. Ensure that you keep your power bank dry at all times.

Is the Anker PowerCore good?

The Anker powercore a solid yet powerful battery pack. This power bank is very well built and has this nice stylish design. It is slim and kind of looks like a phone and fits well in the pocket. With a slim design it comes lightweight, it feels like holding two phones at once.

User Guide

ANKER PowerCore II 6700

Product Number A1220

External Battery / Portable Charger

Using Your PowerCore

• Check the power level

• Charge your phone or tablet

• No Lightning cable included
• Recharge your PowerCore

When your PowerCore is fully charged, the LED indicators will turn o.

To give your PowerCore the fastest, safest recharge, use an Anker® USB charger.

Specifications

Declaration of Conformity

Hereby, Anker Innovations Limited declares that the product type A1220 is in compliance with Directive 2014/30/EU. The full text of the EU declaration of conformity is available at the following internet address: https://www.anker.com
Anker Innovations Limited

Room 1318-19, Hollywood Plaza, 610 Nathan Road, Mongkok,
Kowloon, Hong Kong

This symbol indicates that this product shall not be treated as household waste. Instead it shall be handed over to the applicable collection point for the recycling of electrical and electronic equipment.

Attention

  To preserve battery lifespan, use and recharge at least once every 4 months

  Do not disassemble

  Use original or certified cables

  Do not expose to liquids

 Avoid dropping

Avoid extreme temperatures

Customer Service

 18-month limited warranty

 Lifetime technical support

[email protected]

+1 (800) 988 7973 (US) Mon-Fri 9:00 – 17:00 (PT)
+44 (0) 1604 936200 (UK) Mon-Fri 6:00 – 11:00 (GMT)
+49 (0) 69 9579 7960 (DE) Mon-Fri 6:00 – 11:00

For FAQs and more information, please visit:

anker.com/support

ANKER PowerCore 20100 Power Bank

Using your PowerCore 

Check the power level

Charge your phone or tablet

Recharge your PowerCore

When your PowerCore is fully charged, the LED indicators will turn off. 

To give your PowerCore the fastest, safest recharge, use an Anker® USB charger.

Specifications

Attention 

To preserve lifespan recharge every 4 months

Using original or certified cables

Don’t expose to liquids

Don’t disassemble

Avoid dropping

Avoid extreme temperatures

Customer Service

18-month limited warranty

Lifetime technical support

[email protected]
1·800-988-7973 I Mon-Fri 9:00-5:00 PST (US) 03-4455-7823 I Mon-Fri 9:00-17:00 < R7.f,) 069-9579-7960 I Mon-Fri 6:00-11:00 (DE) 400-0550-036 I Mon-Fri 9:00-17:30 (r.pf/;1)

For FAQs and more information, please visit: Product Number: A 1271
External Battery: Portable Charger

USER MANUAL

Anker Soundcore Flare Mini

Charging:

Paring Mode:

Music Control:

TWS Mode:

Download the Soundcore App

Customer Service

Service Client

• Lifetime technical support
• 18-month limit warranty
• [email protected]
• + 1 (BOO) 988 7973 {US) Mon-Fri 9:00 – 17:00 (Pl)
  +44 (O) 1604 936200 (UK) Mon-Fri 6:00-11:00 (GMTI

Input: DC 5V 1A
Anker Innovations Limited
Room 1318-19, Hollywood Plaza, 610 Nathan Road, Mongkok, Kowloon, Hong Kong

For FAQs and more information, please visit : soundcore.com/support

© Anker Innovations Limited. All rights reserved. Soundcore and the Soundcore logo are trademarks of Anker Innovations Limited, registered in the United States and other countries.
Model: A3167

Important Safety Information

• Avoid dropping.
• Do not disassemble.
• Do not install near any heat sources.
• Do not place any sources of danger on this device (e.g. liquid filled objects, lit candles).
• Use original or certified cables.
• Clean with a dry, soft lint-free cloth. Do not use any corrosive cleaner or oil.
• Do not expose batteries to high heat as direct sun light, fire and Etc.

Notice

This product complies with the radio interference requirements of the European Community.

This symbol means the product must not be discarded as household waste, and should be delivered to an appropriate collection facility for recycling. Follow local rules and never dispose of the product and rechargeable batteries with normal household waste. Correct disposal of old products and rechargeable batteries helps prevent negative consequences for the environment and human health.

FCC Statement

Note: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occurring in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

1. Reorient or relocate the receiving antenna.
2. Increase the separation between the equipment and receiver.
3. Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
4. Consult the dealer or an experienced radio/TV technician for help.

This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:

1. This device may not cause harmful interference, and
2. This device must accept any interference received, including interference that may cause undesired operation.

Warning: Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.

The following importer is the responsible party 
Company Name: Fantasia Trading LLC
Address: 9155 Archibald Avenue, Suite 202, Rancho Cucamonga, CA, 91730, US
Telephone: +1 (909) 484 1530

Radiation Exposure Statement
The device has been evaluated to meet general RF exposure requirement. The device can be used in portable exposure condition without restriction.

Trademark

The Bluetooth® word mark and logos are registered trademarks owned by the Bluetooth SIG, Inc. and any use of such marks by Anker Innovations Limited. is under license. Other trademarks and trade names are those of their respective owners.

* Additional Legal Rights for Consumers
For consumers, who are covered by consumer protection laws or regulations in their country of purchase or, if different, their country of residence, the benefits conferred by Soundcore’s Limited Warranty are in addition to all rights and remedies conveyed by such consumer protection laws and regulations, including but not limited to these additional rights.

For FAQs and more information, please visit https://www.soundcore.com/

CAUTION RISK OF EXPLOSION IF BATTERY IS REPLACED BY AN INCORRECT TYPE. DISPOSE OF USED BATTERIES ACCORDING TO THE INSTRUCTIONS IC NOTICE TO CANADIAN USERS

This device complies with Industry Canada license-exempt RSS standard(s). Operation is subject to the following two conditions:

• (1) This device may not cause interference, and
• (2) This device must accept any interference, including interference that may cause undesired operation of the device. This Class B digital apparatus complies with Canadian ICES-003

Declaration of Conformity

Hereby, Anker Innovations Limited declares that the product type A3167
is in compliance with Directive 2014/53/EU. The full text of the EU
declaration of conformity is available at the following internet
Address: www.soundcore.com
Maximum output power: 2.0dBm
Frequency band: 2.4G band(2.4000GHz-2.4835GHz)
Anker Innovations Limited
Room 1318-19, Hollywood Plaza, 610 Nathan Road, Mongkok, Kowloon, Hong Kong.

USER MANUAL

Anker Soundcore Flare 2 A3165

How to Use

Download App

Customer Service

• 18-month limited warranty
• Lifetime technical support

Our warranty is additional to the legal rights consumers have buying this product.

Input: DC 5V 2A

Anker Innovations Limited
Room 1318-19, Hollywood Plaza, 610 Nathan Road, Mongkok, Kowloon, Hong Kong

ANKER TECHNOLOGY (UK) LTD
Suite B, Fairgate House, 205 Kings Road, Tyseley, Birmingham, B11 2AA, United Kingdom

Support

[email protected]

+1 (800) 988 7973 (US) Mon-Fri 9:00 – 17:00 (PT)                              +44 (0) 1604 936200 (UK) Mon-Fri 6:00 – 11:00 (GMT)                       +49 (0) 69 9579 7960 (DE) Mon-Fri 6:00 – 11:00

For FAQs and more information, please visit :

soundcore.com/support

Important Safety Information

• Avoid dropping.
• Do not disassemble.
• Do not install near any heat sources.
• Do not place any sources of danger on this product (e.g. liquid filled objects, lit candles).
• Avoid extreme temperatures.
• The product should not be exposed to excessive heat such as sunshine, fire or the like.
• Use original or certified cables.
• Clean with a dry, soft lint-free cloth. Do not use any corrosive cleaner or oil.

Notice

This product complies with the radio interference requirements of
the European Community.

CAUTION RISK OF EXPLOSION IF BATTERY IS REPLACED BY AN INCORRECT TYPE. DISPOSE OF USED BATTERIES ACCORDING TO THE INSTRUCTIONS.

This symbol means the product must not be discarded as household waste, and should be delivered to an appropriate collection facility for recycling. Follow local rules and never dispose of the product and rechargeable batteries with normal household waste. Correct disposal of old products and rechargeable batteries helps prevent negative consequences for the environment and human health.

FCC Statement

This device complies with Part 15 of the FCC Rules. Operation is subject to the
following two conditions: (1) This device may not cause harmful interference, and
(2) This device must accept any interference received, including interference that
may cause undesired operation.

Warning: Changes or modifications not expressly approved by the party
responsible for compliance could void the user’s authority to operate the
equipment.

Note: This equipment has been tested and found to comply with the limits for
a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are
designed to provide reasonable protection against harmful interference in a
residential installation.

This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

(1) Reorient or relocate the receiving antenna. (2) Increase the separation between
the equipment and receiver. (3) Connect the equipment into an outlet on a circuit
different from that to which the receiver is connected. (4) Consult the dealer or an
experienced radio/TV technician for help.

The following importer is the responsible party
Company Name: Fantasia Trading LLC                                                       Address: 9155 Archibald Avenue, Suite 202, Rancho Cucamonga, CA, 91730, US
Telephone: +1 (800) 988 7973

RF Warning Statement

FCC RF Exposure requirements: The highest SAR value reported under this
standard during product certification with the minimum separation distance of
0mm is 0.110W/Kg. This equipment must not be collocated or operating in
conjunction with any other antenna or transmitter.

This product is compliance to FCC RF Exposure requirements and refers to FCC
website https://apps.fcc.gov/oetcf/eas/reports/GenericSearch.cfm

Search for FCC ID: 2AOKB-A3165

IC NOTICE TO CANADIAN USERS

This device contains licence-exempt transmitter(s)/receiver(s) that comply with Innovation, Science and Economic Development Canada’s licence-exempt RSS(s). Operation is subject to the following two conditions:

• This device may not cause interference.
• This device must accept any interference, including interference that may cause
  undesired operation of the device.

This Class B digital apparatus complies with Canadian ICES-003.

This EUT is compliance with SAR for general population/uncontrolled exposure limits in IC RSS-102 and had been tested in accordance with the measurement methods and procedures specified in IEEE 1528 and IEC 62209. This equipment
should be installed and operated with minimum distance 0mm between the radiator and your body. This device and its antenna(s)must not be co-located or operating in conjunction with any other antenna or transmitter.

Declaration of Conformity

Hereby, Anker Innovations Limited declares that the product type A3615
is in compliance with Directive 2014/53/EU. The full text of the EU
declaration of conformity is available at the following internet address: www.soundcore.com

Maximum output power: 13.47dBm

Frequency band: 2.4G band(2.402GHz-2.480GHz)

Anker Innovations Limited
Room 1318-19, Hollywood Plaza, 610 Nathan Road, Mongkok, Kowloon, Hong
Kong

For this equipment, Body SAR was performed with the equipment configured in
the positions according to EN62209-2:2010, and Body SAR was performed with
the device 0mm from the phantom. This equipment A3165 has also been tested
against this SAR limit, and it should be installed and operated with minimum
distance 0 mm between the radiator and your body.

Trademark

Bluetooth

The Bluetooth® word mark and logos are registered trademarks owned by the
Bluetooth SIG, Inc. and any use of such marks by Anker Innovations Limited is
under license.

Other trademarks and trade names are those of their respective owners.

Additional Legal Rights for Consumers
For consumers, who are covered by consumer protection laws or regulations in
their country of purchase or, if different, their country of residence, the benefits conferred by Soundcore’s Limited Warranty are in addition to all rights and
remedies conveyed by such consumer protection laws and regulations, including
but not limited to these additional rights.

ANKER PowerCore Metro Essential 20000

ANKER PowerCore Metro Essential 20000

Charge Your Phone or Tablet

Charge Your Bluetooth Earphones or Smart Watches

1. Enter “trickle-charging” mode: Press the power button twice or press and hold for 2 seconds. The LED indicator will turn green.
2. Charge your devices recommended for smart watches or Bluetooth earphones.
3. Exit “trickle-charging” mode: Press the power button once again.

Recharge Your PowerCore

Warning: USB-C port is for input only.

Specifications

Important Safety Instructions

When using this product, basic precautions should always be followed, including the following:

1. Store product in a cool and dry place.
2. Do not store the product in hot or humid environments.
3. Use of a power supply or charger not recommended or sold by the product manufacturer may result in a risk of fire or injury to persons.
4. Operating temperature should be between 32°F to 104°F / 0℃ to 40℃.
5. Do not disassemble the product. Take it to a qualified service person when service or repair is required. Incorrect reassembly may result in a risk of fire or injury to persons.
6. If the product is not used for long periods of time, you should change and discharge once every three months.
7. When charging a device, the product may feel warm, this is a normal operating condition and should not be cause for concern.
8. In normal conditions, the battery performance will decline over several years.
9. Do not dispose of the product in heat or fire.
10. Do not clean the product with harmful chemicals or detergents.
11. Misuse, dropping, or excessive force may cause product damage.
12. When disposing of secondary cells or batteries, keep cells or batteries of different electrochemical systems separate from each other.
13. Be aware discharged battery may cause fire or smoke, tape the terminals to insulate them.

This symbol indicates that this product shall not be treated as household waste. Instead it shall be handed over to the applicable collection point for the recycling of electrical and electronic equipment.

Notice;

Declaration of Conformity
Hereby, Anker Innovations Limited declares that the product type A1268 is in compliance with Directive 2014/30/EU & 2011/65/EU & 2001/95/ EC
The full text of the EU declaration of conformity is available at the following internet address:
https://www.anker.com
Anker Technology (UK) Ltd
Suite B, Fairgate House, 205 Kings Road, Tyseley, Birmingham, B11 2AA,
United Kingdom
Anker Innovations Limited
Room 1318-19, Hollywood Plaza, 610 Nathan Road, Mongkok, Kowloon,
Hong Kong
Anker Innovations Deutschland GmbH
Georg-Muche-Strasse 3-5, 80807 Munich, Germany.

GB Declaration of Conformity
Hereby, Anker Innovations Limited declares that the product type A1268 is in compliance with following Directives: Electromagnetic Compatibility Regulations 2016, The Restriction of the Use of Certain Hazardous Substances in Electrical and Electronic Equipment Regulations 2012. The full text of the GB declaration of conformity is available at the following internet address:
https://www.anker.com

FCC Statement

This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.
Warning: Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.

Note: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation.

This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

1. Reorient or relocate the receiving antenna.
2. Increase the separation between the equipment and receiver.
3. Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
4. Consult the dealer or an experienced radio / TV technician for help.

The following importer is the responsible party:

• Company Name: Fantasia Trading LLC
• Address: 5350 Ontario Mills Pkwy, Suite 100, Ontario, CA 91764
• Telephone: 1-800-988-7973

IC Statement
This device complies with Industry Canada license-ICES-003. Operation is subject to the following two conditions: (1) This device may not cause interference, and (2) This device must accept any interference, including interference that may cause undesired operation of the device.

Please note that your rights under applicable law governing the sale of consumer goods remain unaffected by the warranties given in this Limited Warranty.

FAQ’S

What is the difference between PowerCore II 20000 and PowerCore II 10000?

PowerCore II 20000 has a higher capacity of 20,000 mAh, while PowerCore II 10000 has a capacity of 10,000 mAh.

How do I charge my PowerCore II 20000?

You can charge your PowerCore II 20000 with the included USB-C cable. You can also use a compatible Quick Charge wall charger for faster charging.

How do I charge my devices with my PowerCore II 20000?

You can charge your devices with your PowerCore II 20000 using the USB-C port or the Micro-USB input port. You can also use a compatible USB-C cable to charge your device.

How long will it take to fully charge my device?

It will take approximately 6 hours to fully charge your device using the included USB-C cable. It will take approximately 3 hours to fully charge your device using a compatible Quick Charge wall charger.

How do I know if my Anker PowerCore essential 20000 is charging?

Charge Your Bluetooth Earphones or Smart Watches
Enter “trickle-charging” mode: Press the power button twice or press and hold for 2 seconds. The LED indicator will turn green. Charge your devices recommended for smart watches or Bluetooth earphones. Exit “trickle-charging” mode: Press the power button once again.

Do Anker Chargers stop charging when full?

Your phone will actually stop pulling in power when it is full, but may trickle charge occasionally as the charge falls to 99%, 98%, etc.

What do the lights on my Anker power bank mean?

The light im referring to is when you hold down where it shows you how much charge is on the anker hold it down for about ten sec and it goes from white to green(1 answer) A: This makes it go into trickle-charge mode which means PowerCore Metro won’t turn off while charging low-power devices.

How do I know if my power bank is fully charged?

Once it is fully charged, all the indicator lights will illuminate. Unplug the charger from the wall or your computer once all indicator lights are illuminated.

What are the disadvantages of using power bank?

The disadvantages of a power bank:
Many power banks are heavy or costly. They must be charged as soon as their battery is low. If they are lower, they will drain faster. In some cases, they can also affect the battery of your phone.

How do I check my battery percentage on my power bank?

On one of the sides of the power bank, you will see multiple LED lights that indicate the actual battery remaining in your portable charger. One by one, these lights will turn off as the battery on your power bank goes down.

How do I check my power bank life?

Step 1: Fully discharge your powerbank.
Step 2: Plug the USB voltage current meter to the USB power source.
Step 3: Begin charging the empty powerbank and start timer. Immediately take note of the Amp reading.

Can power bank battery be replaced?

You can also replace new batteries for full capacity of power bank. Small Introduction: Portable Power Banks are comprised of a special battery in a special case with a special circuit to control power flow.

VIDEO

ANKER PowerCore Metro Essential 20000
www://anker.com/products/

Welcome Guide
PowerDrive Speed 2
2 x Quick Charge

Using Your PowerDrive

• Plug it in
• Charge your phones and tablets

For the fastest and safest charge, use an Anker® cable, your device’s original cable or a certified one (such as MFi).

Specifications

Input	12 V / 24 V
Output	3.6 V – 6.5 V 3 A 6.5 V – 9 V 2 A 9 V – 12 V 1.5 A
Size	65 × 35 × 35 mm 2.6 × 1.4 × 1.4 in
Weight Vægt	40 g / 1.4 oz

Attention

Avoid extreme temperatures

Use original or certified cables

Don’t expose to liquids

Avoid dropping

Don’t disassemble

Warning

IMPORTANT SAFETY INSTRUCTIONS
1. SAVE THESE INSTRUCTIONS– This manual contains important safety and operating instructions for car charger Model A2228.
2. Before using a car charger, read all instructions and cautionary markings on the car charger
3. Do not expose the charger to rain, moisture, or snow.
4. Use of an attachment not recommended or sold by the car charger manufacturer may result in a risk of fire, electric shock, or injury to persons.
5. To reduce the risk of damage to the cigarette lighter connector and cord, pull by the cigarette lighter connector rather than the cord when disconnecting the charger.
6. Make sure the cord is located so that it will not be stepped on, tripped over, or otherwise subjected to damage or stress.
7. Do not operate charger with damaged cord or cigarette lighter connector – replace it immediately.
8. Do not operate the charger if it has received a sharp blow, been dropped, or otherwise damaged in any way; take it to a qualified service person.
9. Do not disassemble the charger; take it to a qualified service person when service or repair is required. Incorrect reassembly may result in a risk of electric shock or fire.
10. To reduce the risk of electric shock, unplug the charger before attempting any maintenance or cleaning. Turning off controls will not reduce this risk.
11. To reduce the risk of fire or electric shock, do not interconnect output terminations
12. CAUTION – For continued protection against the risk of fire, replace only with the same type and ratings of fuse, fuse rating 32Vdc, 7A.

SAVE THESE INSTRUCTIONS

FCC Statement
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.
Warning:
Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.
Note:
This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation.
This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: (1) Reorient or relocate the receiving antenna. (2) Increase the separation between the equipment and receiver.
(3) Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
(4) Consult the dealer or an experienced radio / TV technician for help.
The following importer is the responsible party.
Company Name: Fantasia Trading LLC
Address: 9155 Archibald Avenue, Suite 202, Rancho Cucamonga, CA, 91730, US
Telephone: +1 (909) 484 1530
This device complies with Industry Canada license-ICES-003. Operation is subject to the following two conditions:
(1) This device may not cause interference, and (2) This device must accept any interference, including interference that may cause undesired operation of the device.

Declaration of Conformity
Hereby, Anker Technology Co., Limited declares that the product type A2228 is in compliance with Directive 2014/30 /EU. The full text of the EU declaration of conformity is available at the following internet address: https://www.anker.com/products
Anker Technology Co., Limited
Room 1318-19, Hollywood Plaza, 610 Nathan Road, Mongkok,
Kowloon, Hong Kong

Customer Service

18-month limited warranty

Lifetime technical support

For FAQs and more information, please visit:

http://goo.gl/jesXbf

@Anker
@Anker Japan
@Anker Deutschland

@AnkerOfficial
@Anker_JP

@Anker

[email protected]

1-800-988-7973 | Mon-Fri 9:00-17:00 PST (US)

Welcome Guide
selfie stick with Tripod

Using Your Selfie Stick

Bluetooth pairing

Press the camera button for 3 seconds until the blue light begins flashing. With your phone or camera, search for the “Anker   7163”  Bluetooth device and pair. The blue light will remain steady once the pairing is complete.

To turn off Bluetooth, press the camera button for 3 seconds.

Flip the phone holder up and rotate it to the horizontal position, relative to the camera button.

Placing your phone

Place your phone in the holder and adjust the sides for a secure fit.

Taking a photo

Press the camera button on the selfie stick to take a photo. If this does not work, go into your phone’s settings and enable the option to take a photo with the volume button.

Placing your GoPro

Loosen the screw on the right side of the phone holder, then flip it over so that the GoPro holder is in the appropriate position.

Using the tripod

Open the tripod legs at the bottom of the theselfie stick, and place them on a flat surface. Remove the camera button remote.

Attention

	To preserve battery lifespan, use and recharge at least once every 4 months
	Use original or certified cables
	Don’t expose to liquids
	Don’t disassemble
	Avoid dropping
	Avoid extreme temperatures

Ensure your phone and the cradle are fully secure before use.

Specifications

Size(when retracted)	195 x 46 x 27 mm / 7.7 x 1.8 x11 in
Length max <=> (when extended)	605 mm / 23.8 in
Weight	155g/Soz
Input	5V/ 0.1A
Battery Life	20 h

Declaration of Conformity
Hereby, Anker Innovations Limited (or Anker  Technology Co., Limited) declares that product type A7163 is in compliance with Directive 2014/53/EU.

FCC Statement
This device complies with Part 15 of the FCC Rules.  Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.
Warning: Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.

Note: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation.
This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be  determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the  following measures:

1.  Reorient or relocate the receiving antenna.
2. Increase the separation between the equipment and receiver.
3.  Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
4.  Consult the dealer or an experienced radio / TV technician for help.

RF Warning Statement
The device has been evaluated to meet general RF exposure requirements. The device can be used in portable exposure conditions without restriction.

Customer Service

18-month limited warranty
Lifetime technical support
We hope you never have the need, but if you do, our service is friendly and hassle-free.

 [email protected]

1-800-988-7973 | Mon-Fri 9:00-5:00 PST (US)
44(0)1604 936200 Mon-Fri 6:00-11:00(GMT)

USER MANUAL

Anker Nebula Mars II Pro

Overview

1. Front View

* Slide down to power on and automatically adjust focus, slide up to power off

2. Rear View

3. Top View

4. Bottom View

5. Remote Control

Getting Started

Prepare the remote control

• For first-time use, remove the battery insulation tab to activate the remote control battery.

• To replace the battery, slide to open the battery compartment, insert new batteries
  (matching the polarity (+/-) indicated), and close the battery compartment.

Charge your projector     

Fully charge the built-in battery before using for the first time (charger is not provided).LED indicators will light on when the battery is charged.

Power on / off

To turn on / off the projector, slide down / up the lens cover.

Adjust the focus         

After the projector is turned on:

Nebula Connect App           

•  Download the Nebula Connect app from the App Store (iOS devices) or Google Play
  (Android devices).
  

• Enable Bluetooth on your smartphone and select [Nebula] as the device to be connected.
• Open the Nebula Connect app and follow the on-screen instructions to complete the connection setup.

To get a full user manual, visit the website:
www.seenebula.com/downloads

Important Safety Instructions

1. Due to the enclosure material used, the product must only be connected to a USB interface of version 2.0 or higher.
2. The adapter must be installed near the device and must be easily accessible.
3. Do not use the device in an environment where the temperature is too high or too low. Never expose the device to strong sunshine or wet environments.
4. The ideal temperature range for this product and its accessories is 14°F – 95°F / -10°C -35°C.
5. When charging, place the device in an environment that has a normal room temperature and good ventilation. It is recommended to charge the device in an environment with a temperature that ranges from 41°F – 77°F / 5°C – 25°C.
6. Only use the charger provided by the manufacturer. Using unauthorized chargers may cause danger and violate the authorization of the projector and the guarantee.
7. This charger is for indoor use only.

Notice

Declaration of Conformity        

This product complies with the radio interference requirements of the European Community.       Hereby, Anker Innovations Limited. declares that this device is in compliance with the essential requirements and other relevant provisions of Directive 2014/53/EU. For the Declaration of Conformity, visit the Web site www.SeeNebula.com.

RF exposure information:

The Maximum Permissible Exposure (MPE) level has been calculated based on a distance of d=20 cm between the device and the human body. To maintain compliance with RF exposure requirement, use the product that maintains a 20cm distance between the device and human body.                                                                                                                                           BT Maximum output power: 8 dBm;                                                                                         BT Frequency band: 2402~2480 MHz;
Wi-Fi Max Output Power: 19 dBm (2.4G); 15 dBm (5G);
Wi-Fi Frequency Band: 2412~2472 MHz (2.4G);
5150~5250 MHz, 5725~5850 MHz (5G).
5150~5250 MHz can be used indoor only.

Your product is designed and manufactured with
high quality materials and components, which
can be recycled and reused.

This symbol means the product must not be
discarded as household waste, and should be
delivered to an appropriate collection facility
for recycling. Proper disposal and recycling
helps protect natural resources, human health,
and the environment. For more information on disposal and recycling of this product, contact your local municipality, disposal service, or the
shop where you bought this product.

The following importer is the responsible party (contact for EU matters only)
Importer: Anker Technology (UK) Ltd
Importer Address: Suite B, Fairgate House, 205 Kings Road,
Tyseley, Birmingham, B11 2AA, United Kingdom

FCC Notice

This device complies with the FCC rules, Part 15. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) This device must accept any interference received, including interference that may cause undesired operation.

Warning: Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.

Note: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation.

This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instruction manual, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a
particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

1. Reorient or relocate the receiving antenna.
2. Increase the separation between equipment and
   receiver.
3. Connect the equipment into an outlet on a circuit
   different from that to which the receiver is connected.
4. Consult the dealer or an experienced radio / TV
   technician for help.

FCC Radiation Exposure Statement

This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with aminimum distance of 20cm between the radiator and your body. This transmitter must not be co-located or operated in conjunction with any other antenna or transmitter.
The following importer is the responsible party (contact for EU matters only).
Importer: Anker Technology (UK) Ltd
Importer Address: Suite B, Fairgate House, 205 Kings
Road, Tyseley, Birmingham, B11 2AA, United Kingdom

Notice: Shielded cables

All connections to other computing devices must be made using shielded cables to maintain compliance with FCC regulations.
Company Name: Fantasia Trading LLC
Address: 9155 Archibald Avenue, Suite 202, Rancho Cucamonga, CA, 91730, USA
Anker Innovations Limited
Room 1318-19, Hollywood Plaza, 610 Nathan Road,
Mongkok, Kowloon, Hong Kong