amazonbasics B07TSCK5VN Forward Mounted Binocular Stereo Microscope

Parts

Parts Description

A. WF10x eyepiece x2
B. Diopter adjustment
C. Adjustable eyepiece housing
D. Head
E. Objective
F. Incident light lamp
G. Translucent stage plate
H. Transmitted light lamp
I. Base
J. Height adjustment knob
K. Focus knob
L. Light switch
M. Power switch
N. Power socket
O. Stage clips
P. Eye cup x2
Q. Black/white stage plate
R. Dust cover
S. Adapter

IMPORTANT SAFEGUARDS

Read these instructions carefully and retain them for future use. If this product is passed to a third party, then these instructions must be included. When using electrical appliances, basic safety precautions should always be followed to reduce the risk of fire, electric shock, and/or injury to persons including the following:

WARNING: It is prohibited to disassemble the machine.
WARNING: Risk of serious injury! Dyes are harmful by inhalation, harmful in contact with skin, harmful if swallowed. It is prohibited to disassemble the machine.
WARNING: Risk of serious injury! Dyes are harmful by inhalation, harmful in contact with skin, harmful if swallowed.

Methylene Blue Dye: Avoid eye and skin contact. Causes serious eye irritation. Do not swallow. Do not inhale.

First aid in case of eye contact: Immediately flush eyes with excess water for 15 minutes, lifting lower and upper eyelids occasionally. Remove contact lenses if wearing any. Get medical attention if irritation develops.
First aid in case of skin contact: Immediately flush skin with excess water for 15 minutes while removing contaminated clothing. Get medical attention if irritation develops.
First aid in case of ingestion: Do not induce vomiting without medical advice. Consult a physician if necessary.

NOTICE: Methylene Blue dye has been classified by the International Agency for Research on Cancer (IARC) as Group 3: Not classifiable as carcinogenic to humans.
NOTICE: Use the product within the correct ambient conditions to avoid mildewing and damage.

• Keep the work area clean, clear and away from any food storage. Prepare the slides in a well-lit area and close to a water supply. Use a solid table with a heat-resistant top.
• Do not allow dyes to come into contact with any part of the body particularly mouth and eyes.
• Do not eat, drink or smoke in the work area.
• Clean all the accessories and the work area after each use.

Wash hands thoroughly after handling and carrying out experiments.

• A separate tin or bucket should be used for the disposal of specimen samples and dyes. Any wasted solution should be poured directly down a drain, but never into a sink basin.
• Dispose of used specimen samples a household trash immediately after use.
• Do not discard any equipment into the fire to avoid violent combustion or explosion.
• If the product has to be moved, carry with one hand holding the product at the arm and another hand supporting it at the base.
• Examine the set regularly for potentially unsafe conditions, such as damaged housing, or parts. In the event of such damage, the set should not be used until it is properly repaired.
• Store the set in its original packaging out of reach of children and animals.

Symbols Explanation

• This product is classified as protection class II. This means the product is equipped with reinforced or double insulation between the mains supply circuit and the output voltage or the casing. Therefore it does not require a safety connection to an electrical earth (ground). This product is for indoor use only.
• Direct current (DC).
• Alternating current (AC).
• Health advice for emergencies. Wash hands before and after experiments. Safety warning. Improper use of the product could result in injury or death.

Intended Use

• This product is for private use, home schooling, school applications and teaching demonstrations. It is not for commercial use.
• This product is intended to be used in dry indoor areas only.
• No liability will be accepted for damages resulting from improper use or non-compliance with these instructions.

Before First Use

• Check the product for transport damages.
  DANGER: Risk of suffocation! Keep any packaging materials away from children – these materials are a potential source of danger, e.g. suffocation.

Operation

Switching on/off

• Connect the adapter (S) to a power source and the other end to the power socket (N).
• Flip the power switch (M) to “I” to turn on.
• After use, flip the power switch (M) to “O” to turn off.

Calculating magnification power
Total magnification power is calculated by multiplying the magnification power of the eyepiece and the objective lens.

Observing through the microscope

A. For observing slides or translucent specimens, use the translucent stage plate (G). Flip the light switch (L) to “II” to turn on the transmitted light lamp (H).
B. For observing solids or opaque specimens, use the black/white stage plate (Q). Use the black side for light colored specimens and the white side for dark colored specimens. Flip the light switch (L to “I” to  turn on the incident light lamp (F).

Place the eyepieces (A) into the adjustable eyepiece housing (C).
NOTICE: There is an option to secure the eyepieces (A), tighten the screw on the side of the adjustable eyepiece housing (C) to lock the eyepieces (A) in place.

• Attach the eye cups (P) onto the eyepieces (A).
• Remove the cover of the objective (E).
• Rotate the objective (E) to the lowest magnification power setting.
  NOTICE Start with the lowest magnification power every time a new specimen is placed on a stage plate (G/Q). Most observations are made at low magnification power.
• Place a slide, a small object or a petri-dish holding a specimen (not included) onto the stage plate (G/Q). Secure the slide or specimen with the stage clips (O) if needed.
• Turn the height adjustment knob (J) to adjust the height of the head (D) to an estimated viewing distance.
• Look into the left eyepiece (A), rotate the focus knob (N) slowly until the image is clear. Adjust the position of the slide/specimen if needed.
• Look into the right eyepiece (A), rotate the diopter adjustment (B) until the image is clear.
• Look into both eyepieces (A), move around the adjustable eyepiece housing (C) until the two images merge into one.
• Rotate the objective (E) to the higher magnification power. Re-adjust the focus using the focus knob (N) and the diopter adjustment (B) if needed.
• After using the microscope, remove the slide/specimen from the stage plate (G/Q).
• Switch off (M) and disconnect the adaptor (S) from the socket outlet.
• Clean the work area and dispose of the used specimens.

Cleaning and Maintenance

WARNING: Risk of damage! During cleaning do not immerse the product in water or other liquids. Never hold the product under running water.

Cleaning

• To clean the lenses (A, E), only use lens cleaning tissues. Do not use cloth, paper or hands.
• To clean the product, wipe with a soft, slightly moist cloth.
• Never use corrosive detergents, wire brushes, abrasive scourers, metal or sharp utensils to clean the product.

Maintenance

• After each use, place the dust cover (R) on the microscope. Place the accessories back into their respective plastic bags to prevent dust from collecting.
• Slight greasing or putting oil may be needed for the mechanical moving parts. Apply the appropriate oil discreetly.

FCC – Supplier’s Declaration of Conformity

FCC Compliance Statement

1. This device complies with Part 15 of the FCC rules. Operation is subject to the following two conditions:
   1. this device may not cause harmful interference, and
   2. this device must accept any interference received, including interference that may cause undesired operation.
2. Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.

FCC Interference Statement
This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
• Consult the dealer or an experienced radio / TV technician for help.

Canada IC Notice

• This Class B digital apparatus complies with Canadian CAN ICES‑3(B) / NMB‑3(B) standard.

Specifications

Feedback and Help
Love it? Hate it? Let us know with a customer review. AmazonBasics is committed to delivering customer-driven products that live up to your high standards. We encourage you to write a review sharing your experiences with the product.

amazon.com/review/review‑your‑purchases#
amazon.com/gp/help/customer/contact‑us

IMPORTANT SAFEGUARDS

Read these instructions carefully and retain them for future use. If this product is passed to a third party, then these instructions must be included.
When using electrical appliances, basic safety precautions should always be followed to reduce the risk of fire, electric shock, and/or injury to persons including the following:
WARNING It is prohibited to disassemble the machine.
WARNING Risk of serious injury! Dyes are harmful by inhalation, harmful in contact with skin, harmful if swallowed.
Methylene Blue Dye: Avoid eye and skin contact. Causes serious eye irritation. Do not swallow. Do not inhale.
First aid in case of eye contact: Immediately flush eyes with excess water for 15 minutes, lifting lower and upper eyelids occasionally. Get medical attention if irritation develops.
First aid in case of skin contact: Immediately flush skin with excess water for 15 minutes while removing contaminated clothing. Get medical attention if irritation develops.
First aid in case of ingestion: Do not induce vomiting without medical advice. Consult a physician if necessary.
NOTICE Methylene Blue dye has been classified by the International Agency for Research on Cancer (IARC) as Group 3: Not classifiable as carcinogenic to humans.
NOTICE Use the product within the correct ambient conditions to avoid mildewing and damage.

• Keep the work area clean, clear, and away from any food storage. Prepare the slides in a well-lit area and close to a water supply. Use a
  solid table with a heat-resistant top.
• Do not allow dyes to come into contact with any part of the body particularly the mouth and eyes.
• Do not eat, drink or smoke in the work area.
•  Clean all the accessories and the work area after each use.
  Wash hands thoroughly after handling and carrying out experiments.
• A separate tin or bucket should be used for the disposal of specimen samples and dyes. Any wasted solution should be poured directly
  down a drain, but never into a sink basin.
•  Dispose of used specimen samples household trash immediately after use.
• Do not discard any equipment to the fire to avoid violent combustion or explosion.
•  If the product has to be moved, carry with one hand holding the product at the arm and another hand supporting it at the base.
• Examine the set regularly for potentially unsafe conditions, such as damaged housing, or parts. In the event of such damage, the set
  should not be used until it is properly repaired.
•  Store the set in its original packaging out of reach of children and animals.

Symbols Explanation

	This product is classified as protection class II. This means the product is equipped with reinforced or double insulation between the mains supply circuit and the output voltage or the casing. Therefore it does not require a safety connection to electrical earth (ground).
	This product is for indoor use only.
	Direct current (DC).
	Alternating current (AC).
	Health advise for emergencies.
	Wash hands before and after experiments.
	Safety warning. Improper use of the product could result in injury or death.

• This product is for private use, homeschooling, school applications and teaching demonstrations. It is not for commercial use.
•  This product is intended to be used in dry indoor areas only.
•  No liability will be accepted for damages resulting from improper use or non-compliance with these instructions.

• Check the product for transport damages.

DANGER Risk of suffocation! Keep any packaging materials away from children – these materials are a potential source of danger, e.g. suffocation.

• Remove the cover on the base of the adjustable eyepiece housing (L).
•  Remove the cover on the top of the arm (M).
•  Connect the two pieces together.
• Fasten the top part using the screw on the arm (M).

Switching on/off

•  Connect the adapter (AB) to a power outlet and the other end to the power socket (S). The LED lights up.

NOTICE To prevent the bulb in the transmitted light lamp (H) from burning, turn the brightness adjustment wheel (U) setting to the lowest before turning on or off.

•  Flip the power switch (T) to “I” to turn on the transmitted light lamp (H).
•  Flip the power switch (T) to “O” to turn off.
  Calculating magnification power
  Total magnification power is calculated by multiplying the magnification
  power of the eyepiece and the objective lens.

Observing through the microscope

• Remove the eyepiece covers (J) from the adjustable eyepiece housing (L).
•  Place eyepieces (X/Y) into the adjustable eyepiece housing (L).
• Turn the coarse focus knob (P) to adjust the height of the stage (F) to the lowest position.
•  Look into the eyepiece (I), adjust the brightness of the illuminator (H) using the brightness adjustment wheel (U).
• Rotate the nose piece (A) to the lowest magnification power setting.

NOTICE Start with the lowest magnification power every time a new slide is placed on stage (F). Most observations are made at low magnification power.

•  Loosen the stage locking screws (AA) to insert the slide (not included) onto the stage clip (N).
•  Tighten the screws (AA) of the stage clip (N) to secure the slide on the stage (F).
• Without looking into the eyepiece (X/Y), turn the coarse focus knob (P) until the objective lens is close to the slide. The objective lens should not touch the slide.
•  Adjust the position of the slide using the X and Y translation controls (O, R).
•  Look into the left eyepiece (X/Y), rotate the fine focus knob (Q) slowly until the image is clear. Adjust the position of the slide if needed.

CAUTION Risk of electric damage! Never force the adjustment knobs (P), (Q) and, (V) to turn further once the knob is already restrained from turning. It may cause friction and scratch the lenses.

• The condenser (G) is adjusted to focus the light on the specimen. Tinker around with the condenser (G)’s a vertical knob (V), diaphragm (W), and adjustment screws (Z) to achieve the sharpest image.
  NOTICE The condenser diaphragm (W) gathers the available light and concentrates it to illuminate over the specimen with uniform intensity.

•  Look into the right eyepiece (X/Y), rotate the diopter adjustment (K) until the image is clear.
•  Look into both eyepieces (X/Y), adjust the distance between the adjustable eyepiece housing (L) until the two images merge into one.
•  Rotate the nose piece (A) to the next objective lens, increasing in magnification power. Re-adjust the focus using the fine focus knob (Q) if needed.
•  After using the microscope, remove the slide from the stage (F), take off the eyepieces (X/Y), and place the eyepiece covers (J) on.
•  Turn to a minimum the adjustment wheel (U).
•  Switch off (T) and disconnect the adapter (AB) from the power outlet.
• Clean the work area and dispose of the used specimens.

Cleaning and Maintenance

WARNING Risk of damage! During cleaning do not immerse the product in water or other liquids. Never hold the product under running water.

Cleaning

•  To clean the lenses (B, C, D, E, X, Y), only use lens cleaning tissues. Do not use cloth, paper or hands. Rotate the objective lenses (B, C, D, E) counter-clockwise to remove them from the nose piece (A).
• To clean the product, wipe with a soft, slightly moist cloth.
• Never use corrosive detergents, wire brushes, abrasive scourers, metal or sharp utensils to clean the product.

Maintenance

•  After each use, place the dust cover (AC) on the microscope. Place the accessories back into their respective plastic bags to prevent dust from collecting.
•  Slight greasing or putting oil may be needed for the mechanical moving parts. Apply the appropriate oil discreetly.

FCC Compliance Statement

1. This device complies with Part 15 of the FCC rules. Operation is subject to the following two conditions:
   (1) this device may not cause harmful interference, and
   (2) this device must accept any interference received, including interference that may cause undesired operation.
2.  Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.

FCC Interference Statement
This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

•  Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
•  Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
•  Consult the dealer or an experienced radio / TV technician for help.

Canada IC Notice

• This Class B digital apparatus complies with Canadian CAN ICES-3(B) / NMB-3(B) standard.

Love it? Hate it? Let us know with a customer review.
AmazonBasics is committed to delivering customer-driven products that live up to your high standards. We encourage you to write a review sharing your experiences with the product.
amazon.com/review/review‑your‑purchases#
amazon.com/gp/help/customer/contact‑us

amazon.com/AmazonBasics
MADE IN CHINA
V01-08/19

amazonbasics B07T6VFZRP Rice Cooker with Accessories 4 Cups Cooked Rice User Guide

Welcome Guide

Contents

Before getting started, ensure the package contains the following components:

A Lid
B Cooking bowl
C Base unit
D Status indicator Warm
E Status indicator Cook
F Mode switch
G Measuring cup
H Spatula
I Handle
J Supply cord with plug

IMPORTANT SAFEGUARDS

Read these instructions carefully and retain them for future use. If this product is passed to a third party, then these instructions must be included.

When using electrical appliances, basic safety precautions should always be followed to reduce the risk of fire, electric shock, and/or injury to persons including the following:

CAUTION

Risk of electric shock! Cook only in removable container.

• Read all instructions.
• Do not touch hot surfaces. Use handles or knobs.
• ng off parts, and before cleaning the appliance.
• Do not operate the appliance with a damaged cord or plug or after the appliance malfunctions, or has been damaged in any manner. Return the appliance to an authorized service facility for examination, repair or adjustment.
• The use of an accessory not evaluated for use with the product may cause injuries.
• Do not use outdoors.
• Do not let cord hang over edge of table or counter, or touch hot surfaces.
• Do not place on or near a hot gas or electric burner, or in a heated oven.
• Extreme caution must be used when moving an appliance containing hot oil or other hot liquids.
• To disconnect, turn any control to “off”, then remove plug from wall outlet.
• A short power-supply cord is provided to reduce risks resulting from becoming entangled in or tripping over a longer cord. Longer extension cords are available and may be used if care is exercised in their use. If a long extension cord is used,
  • – The marked electrical rating of the extension cord should be at least as great as the electrical rating of the appliance;
  • – If the appliance is of the grounded type, the cord set or extension cord should be a grounding-type 3-wire cord;
  • – The cord should be arranged so that it will not drape over the countertop or tabletop where it can be pulled on by children or tripped over unintentionally.
• Do not immerse the main unit, power cable or plug in water or other liquid.
• This appliance has a polarized plug (one blade is wider than the other). To reduce the risk of electric shock, this plug will fit outlet only one way. If the plug does not fit fully in the outlet, reverse the plug. If it still does not fit, contact a qualified electrician. Do not modify the plug in any way.
• Do not use appliance for other than intended use.
• Household use only.

SAVE THESE INSTRUCTIONS

Intended Use

• This product is for household use only. It is not intended for commercial use.
• This product is intended to be used to cook rice.
• This product is intended to be used in dry indoor areas only.
• No liability will be accepted for damages resulting from improper use or non-compliance with these instructions.

Before First Use

• Check for transport damages.
• Clean the product before first use. Rinse the lid (A) and the cooking bowl (B) in warm water with a mild dishwashing detergent.
• Before connecting the product to the power supply, check that the power supply voltage and current rating corresponds with the power supply details shown on the product rating label.

DANGER

Risk of suffocation! Keep any packaging materials away from children – these materials are a potential source of danger, e.g. suffocation.

Operation

Cooking rice

CAUTION

Risk of damage! Before placing the cooking bowl (B) into the base unit (C), check that it is dry and clean. A wet cooking bowl may damage the cooker

• Place the product on a flat, stable and heat resistant surface.
• Use the measuring cup (G) to add the selected amount of rice to the cooking bowl (B).
• Rinse the rice with water to remove excess starch. Drain.
• Add water to the rice until it covers the corresponding mark inside the cooking bowl (see table below).
• Place the cooking bowl (B) in the base unit (C) and close the lid (A) (fig. 1, 2).
  
• Connect the supply cord (J) to a suitable socket outlet.
• The product automatically turns on.
• To start cooking, push the mode switch (F) down. The red status indicator Cook (E) lights up.
• When cooking is finished, the mode switch (F) automatically switches to the Warm mode. The yellow status indicator Warm (D) lights up.
• Unplug the supply cord (J) from the socket outlet to turn the product off.

WARNING

Risk of injury! During cooking, hot steam is released from the steam vent on the lid (A). Do not touch, cover or obstruct the steam vent.

NOTICE

• The rice cooker does not switch to the Warm mode until all liquid is absorbed.
• Stir the cooked rice with the spatula (H) to distribute the remaining moisture.
• Do not leave the rice cooker set to the Warm mode for more than 12 hours.

Rice and Water Measurement

1 measuring cup (G) = 3/4 US cup

Cleaning and Maintenance

WARNING

• Risk of electric shock! To prevent electric shock, unplug before cleaning.
• Risk of electric shock! During cleaning do not immerse the electrical parts of the product in water or other liquids. Never hold the base unit (C) under running water.

Cleaning

• Let the product cool down to room temperature before cleaning.
• To clean the base unit (C), wipe with a soft, slightly moist cloth.
• To clean the lid (A) and the cooking bowl (B), rinse them in warm water with a mild dishwashing detergent.
• The lid (A), the cooking bowl (B), the measuring cup (G) and the spatula (H) are suitable for the dishwasher (top rack only).NOTICE:  To remove stubborn stains soak the cooking bowl (B) and the lid (A) in warm soapy water before cleaning.
• Dry the product after cleaning.
• Never use corrosive detergents, wire brushes, abrasive scourers, metal or sharp utensils to clean the product.

Storage

• Store the product in a cool and dry place.

Maintenance

• Any other servicing should be performed by an authorized service representative.

Specifications

• Rated power: 120 V~, 60 Hz
• Power input: 200 W
• Net weight: approx. 3.3 lbs (1.5 kg)
• Dimensions (W x H x D): approx. 8.6 x 7.3 x 8.1″ (21.9 x 18.7 x 20.6 cm).

Feedback and Help

Love it? Hate it? Let us know with a customer review. Amazon Basics is committed to delivering customer-driven products that live up to your high standards. We encourage you to write a review sharing your experiences with the product.

amazon.com/review/review-your-purchases#
amazon.com/gp/help/customer/contact-us

MADE IN CHINA

Paper Trimmer, 10 Sheet Capacity 
B07LFH2MGH, B07LFHSRNB

Welcome Guide

Contents:

Before getting started, ensure the package contains the following components:

You will need

IMPORTANT SAFEGUARDS

Read these instructions carefully and retain them for future use. If this product is passed to a third party, then these instructions must be included.

When using the product, basic safety precautions should always be followed to reduce the risk of injury including the following:
Risk of cuts! The product’s blades are sharp. Keep hands and fingers away from the cutting area.

• Keep this product away from children.
• Do not carry the product by the blade or the handle.
• Do not attempt to dislodge jammed debris with a sharp object.
• Always operate the product on a flat, level surface.
• Do not operate the product without the guard rail in place.

Intended use

• This product is intended for trimming paper only. Do not trim materials with metallic of plastic content.
• This product is intended for household and office use only. It is not intended for commercial use.
• No liability will be accepted for damages resulting from improper use or non-compliance with these instructions.

Before First Use

• Check for transport damages.

Risk of suffocation! Keep any packaging materials away from children ­ these materials are a potential source of danger, e.g. suffocation.

Assembly

Step 1:
Loosen the handle screw (C) from the handle (B).
Step 2:
Fix the handle (B) to the blade latch (D) with a handle screw (C).

Operation

Paper trimming
Risk of cuts! The product’s blades are sharp. Keep hands and fingers away from the cutting area.

NOTICE Do not trim more than 10 paper sheets at a time.
NOTICE Remove staples, paper clips etc. from the paper sheets.

• Slide the paper sheets under the protective rail guard (G).
• Pull down the blade latch by the handle.
  

Locking the blade latch
NOTICE Always lock the blade latch (D) when not in use.

• To lock, pull the blade latch (D) and place it on the locking pin (F).
  

Cleaning and Maintenance

Cleaning

• To clean, wipe with a soft, slightly moist cloth.
• Never use corrosive detergents, wire brushes, abrasive scourers, metal or sharp utensils to clean the product.

Maintenance

• For best performance, lubricate the blades with lubricant (not provided) every 3 months.
• Store in a cool and dry place away from children and pets, ideally in original packaging.
• Avoid any vibrations and shocks.

Specifications

Warranty Information

To obtain a copy of the warranty for this product:
amazon.com/AmazonBasics/Warranty
+1-866-216-1072

Feedback and Help

Love it? Hate it? Let us know with a customer review.
AmazonBasics is committed to delivering customer-driven products that live up to your high standards. We encourage you to write a review sharing your experiences with the product.
amazon.com/review/review-your-purchases#
amazon.com/gp/help/customer/contact-us

amazon.com/AmazonBasics
MADE IN CHINA
V4-08/19

Commercial Grade Indoor/Outdoor String Lights
B07TRM8WSY, B07TT6GYMD, B07TRM9MKY, B07TXF166T, B07TV72B2B, B07TT6GQ7G, B07TW9WD4L, B07TV72983, B07TRM8WVP, B07TXDZLS7, B07TV74YTV, B07TT6H1RF,
B07TV74NWQ, B07TXDBMKW, B07TS33SJ4, B07TRMBRRX

IMPORTANT SAFETY INSTRUCTIONS

When using electrical appliances, basic safety precautions should always be followed to reduce the risk of fire, electric shock, and/or injury to persons including the following:

• When products are used in outdoor applications, connect the product to a Ground Fault Circuit Interrupting (GFCI) outlet. If one is not provided, contact a qualified electrician for proper installation.
• This product is not intended for permanent installation or use.
• Do not mount or place near gas or electric heaters, fireplaces, candles or other similar sources of heat.
• Do not secure the wiring of the product with staples or nails, or place on sharp hooks or nails.
• Do not let lamps rest on the supply cord or on any wire.
• Unplug the product when leaving the house, when retiring for the night, or if left unattended.
• This is an electric product – not a toy! To avoid risk of fire, burns, personal injury and electric shock it should not be played with or placed where small children can reach it.
• Do not use this product for other than its intended use.
• Do not hang ornaments or other objects from cord, wire, or light string.
• Do not close doors or windows on the product or extension cords as this may damage the wire insulation.
• Do not cover the product with cloth, paper or any material not part of the product when in use.
• Read and follow all instructions that are on the product or provided with the product.
• Do not install the product near water containers.
• Extension cords used must be rated for outdoor use.
• This product employs overload protection (fuse). A blown fuse indicates an overload or short-circuit situation. If the fuse blows, unplug the product from the outlet. Also unplug any additional strings or products that may be attached to the product. Replace the fuse as per the user servicing instructions (follow product marking for proper fuse rating) and check the product. If the replacement fuse blows, a short-circuit may be present and the product should be discarded.

SAVE THESE INSTRUCTIONS

Intended Use

• This product is intended for indoor and outdoor all-year decorative use. It is intended for temporary installation and use up to 90 days only.
• This product is intended for household use only. It is not intended for commercial use.
• No liability will be accepted for damages resulting from improper use or non-compliance with these instructions.

Before First Use

• Check the product for transport damages.
• Before connecting the product to the power supply, check that the power supply voltage and current rating corresponds with the power supply details shown on the product rating label.

Risk of suffocation! Keep any packaging materials away from children – these materials are a potential source of danger, e.g.  suffocation.

Installation

• Determine installation location and lay the product in place before assembly.
• Fix the product directly to the structural support. Use screw hooks or zip ties if needed (not provided).
• Connect the plug (C) to a suitable outlet. The product lights up.

Connecting in series

To attach additional string lights, insert the plug of a new set into the female cord connector (A).

WARNING Risk of electric shock! Do not combine more than 3 strings of lights.

Product Description

A  Female cord connector
B  LED lamp (non-replaceable)
C  Attachment plug with fuse

Use and Care Instructions

WARNING Risk of electric shock! To prevent electric shock, unplug before cleaning.
WARNING Risk of electric shock! During cleaning do not immerse the product in water or other liquids. Never hold the product under running water.
Cleaning

• To clean, wipe with a soft, slightly moist cloth.
• Never use corrosive detergents, wire brushes, abrasive scourers, metal or sharp utensils to clean the product.

Maintenance

• When the product is placed on a live tree, the tree should be well maintained and fresh. Do not place on live trees in which the needles are brown or break off easily. Keep the tree holder filled with water.
• If the product is placed on a tree, the tree should be well secured and stable.
• Before using or reusing, inspect product carefully. Discard any products that have cut, damaged, or frayed wire insulation or cords, cracks in the lampholders or enclosures, loose connections, or exposed copper wire.
• When storing the product, carefully remove the product from wherever it is placed to avoid any undue strain or stress on the product conductors, connections, and wires.
• When not in use, store neatly in a cool, dry location protected from sunlight.

User Servicing Instructions

Fuse replacement
NOTICE The product requires a max. 3 Amp, 125 Volt fuse.

• Grasp the plug (C) and remove from the receptacle or other outlet device. Do not unplug by pulling on the cord.
• Slide open the fuse access cover on top of the plug (C) towards blades.
• Remove the fuse carefully. Use a pointed object to push the fuse out of the socket.
• Replace the fuse and slide close the fuse access cover on top of the plug (C).
  

CAUTION Risk of fire! Replace only with max. 3 Amp, 125 Volt fuse.

CAUTION Risk of fire! Do not replace the plug (C). It contains a safety device (fuse) that should not be removed. Discard product if the plug (C) is damaged.

FCC – Supplier’s Declaration of Conformity

FCC Compliance Statement

1.  This device complies with Part 15 of the FCC rules. Operation is subject to the following two conditions:
   (1) this device may not cause harmful interference, and
   (2) this device must accept any interference received, including interference that may cause undesired operation.
2. Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment

FCC Interference Statement

This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful
interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio
communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by
turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
•  Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
• Consult the dealer or an experienced radio / TV technician for help.

Canada IC Notice

• This Class B digital apparatus complies with Canadian CAN ICES-3(B) / NMB-3(B) standard

Specifications

B07TRM8WSY,              B07TRM9MKY,
B07TT6GYMD,             B07TXF166T,
B07TT6GQ7G,               B07TV72B2B,
B07TV72983,                  B07TW9WD4L,
B07TRM8WVP,              B07TV74YTV,
B07TV74NWQ,              B07TT6H1RF,
B07TS33SJ4                    B07TXDBMKW,
B07TRMBRRX

Feedback and Help

Love it? Hate it? Let us know with a customer review. AmazonBasics is committed to delivering customer-driven products that live up to your high standards. We encourage you to write a review
sharing your experiences with the product

Folding Plastic Chair, 350-Pound Capacity

IMPORTANT SAFEGUARDS

Read these instructions carefully and retain them for future use. If this product is passed to a third party, then these instructions must be included.

• This product is intended for domestic and office use only.
• Take care when opening/closing the product. Keep hands away from the folding mechanisms to prevent fingers from being trapped and pinched.
• Do not let children climb on or play with the product.
• Always use this product on a firm, level ground.
• Do not stand on the seat.
•  The product is intended for users up to 350 lbs (158 kg).

IMPORTANT, RETAIN FOR FUTURE
REFERENCE: READ CAREFULLY

Before First Use

• Check the product for transport damages.

DANGER
Risk of suffocation! Keep any packaging materials away from children – these materials are a potential source of danger, e.g. suffocation.

Cleaning and Maintenance

• To clean the product, wipe with a soft, slightly moist cloth.
• Never use corrosive detergents, wire brushes, abrasive scourers, metal or sharp utensils to clean the product.

Feedback and Help
Love it? Hate it? Let us know with a customer review. AmazonBasics is committed to delivering customer-driven products that live up to your high standards. We encourage you to write a review sharing your experiences with the product.

US: amazon.com/review/review-your-purchases#
UK: amazon.co.uk/review/review-your-purchases#
US: amazon.com/gp/help/customer/contact-us
UK: amazon.co.uk/gp/help/customer/contact-us

amazon.com/AmazonBasics

MADE IN CHINA

Edge Free Projector Screen 120-inch 16:9, 4K
Pantalla de ProyecciOn sin Borde de 304.8 cm (120 pulgadas), 16:9, 4K
Ecran de Projecteur sans Bords de 304,8 cm (120 pouces) 16:9, 4K
B07L9G F363

Contents:

Before getting started, ensure the package contains the following components

You will need

IMPORTANT SAFEGUARDS

Read these instructions carefully and retain them for future use. If this product is passed to a third party, then these instructions must be included.
When using the product, basic safety precautions should always be followed to reduce the risk of injury including the following:

• This product should be installed only by an experienced adult. If in doubt consult a professional.
• Before mounting determine the suitable mounting location. The unit must be fixed to a wooden or masonry/concrete wall using hardware that is appropriate for the surface (not provided). While installing on drywall, use the provided self-drilling drywall anchors. Do not install on thin plywoods. The fixing point must be capable of supporting the weight of the unit.
• This product is easily flammable. Install it away from any heat sources.
• Do not fold the screen or allow any sharp object to touch the screen’s surface
• Take care not to drill into any pipes or power lines beneath the surface during mounting holes preparation. Use power line/metal detector.
• Do not hang anything on the product.
• Two people are required for installing the product.

WARNING Take special precautions when working on heights, for example, while using a ladder. Use the right type of ladder and ensure it is structurally sound. Use the ladder in accordance with the manufacturer’s instructions.
CAUTION  Risk of cuts! Handle with care. Some elements have sharp edges.

Before First Use

• Check for transport damages

DANGER Risk of suffocation! Keep any packaging materials away from children – these materials are a potential source of danger, e.g. suffocation.
CAUTION The 45-degree angle frame edges are sharp. To Avoid injury please follow the steps below:

• Identify the label “open here” first, which marks the flat frame side.
• Unwrap the entire frame slowly and carefully until you have reached the 45-degree angle frame side.
• Finish unwrapping the 45-degree angle frame edge and remove the tape.
• Never attempt to open the 45-degree angle first or you may risk injury.

Assembly

  Step 1:

NOTICE Frame finish is normal and unnoticeable after screen material is wrapped around the frame.

• Assemble the upper horizontal frame by fixing parts (Al) and (A2) using the center joint (J).
• Secure all parts with 4 bolts (M). Repeat the same procedure to assemble the lower horizontal frame.

Step2

• Slide one elbow joint (L) into each side of the upper horizontal frame assembly. Repeat for the lower horizontal frame assembly.

Step 3:

• • Slide the 2 vertical frames (B) onto the elbow joints (L) of the upper horizontal frame assembly.

Step 4:

• Attach the frame assembly to the frame assembly

Step5:

• Make sure that all corners are flush and secure each corner with 4 bolts (M).

Step 6:

• • Place the screen fabric (G) on a clean and level surface. White (front) side facing down.

Step 7:

• Carefully place the frame assembly on the screen fabric (G).
• Adjust the frame position and precisely match the frame corners with the screen fabric corners.

Step 8:

• Fix the screen fabric (G) at all corners using the hook-and-loop fasteners. Follow the sequence order 1 to 4.

Step 9:

• Fix the screen fabric (G) at all corners using the hook-and-loop fasteners. Follow the sequence order 1 to 12

Step 10:

• Loosen the 2 pre-installed bolts on the upper and lower frame assembly’s bracket.
• Slide the MB hex screws to the center position. • Fix the center support bar (C) using the loosened bolts.

Step 11:

• • Turn the product upside-down.
• Place one strip of the black tape (N at the center top and bottom position of the screen.

Step 12:

• Place the edge trim pieces (H, I) onto the screen.
• Lift each trim piece one by one and remove the adhesive tape protection. Fix the trim piece(s) back on the screen and repeat for the remaining trim piece(s).

Step 13:

• Attach one corner sleeve D to each corner

Step 14:

• Race the wall bracket (E) against the wall and mark the installation holes with a penal. Ensure the holes are level.

Step 15A (for wooden or masonry/concrete walls):

NOTICE: Skip this step IF you plan to fix the product on the drywall. the provide self and drilling drywall anchors (F) do not require drilling

• Drill 6 holes at the necked positions and insert the suitable wall plug (not provided!).

Step 15A(for drywalls):

Step 16:

• fix the wall brackets(E) to the wall using the 6 screws(N)

Step 17:

• Mount the product onto the wall brackets (E).
• Center the screen position by sliding it left or right.

Cleaning and Maintenance

Screen Cleaning

• To clean light dust and dirt, wipe with a lint-free, slightly moist cloth dipped in warm water.
• Lightly wipe in an upwards-downwards motion, starting from the left of the screen and moving to the right.
• Never use corrosive detergents, wire brushes, abrasive scourers, metal or sharp utensils to clean the product.
• Use a dry lint-free cloth to wipe off any excess water from the screen.

 NOTICE 
Do not wipe in a circular motion to avoid the accumulation of dust on the screen. Do not leave the screen to air-dry as the excess water, if any, may cause a non-removable stain.

• To clean heavily soiled/marked screens, dip one side of a cotton swab in alcohol and gently wipe only the desired spot. Use dry side of the cotton swab to wipe the area dry. You may wipe the area again with a dry lint-free cloth to complete the process.
• Never use corrosive detergents, wire brushes, abrasive scourers, metal, or sharp utensils to clean the product.

Maintenance

• Check the components regularly to make sure all screws and bolts are tightened.
• Store in a cool and dry place away from children and pets, ideally in original packaging.
• Avoid any vibrations and shocks.
• Torn screen cannot be repaired.

Specifications

Warranty Information

To obtain a copy of the warranty for this product:

 Visit amazon.com/AmazonBasics/Warranty 

Contact Customer Service at 1-866-216-1072

Feedback

Love it? Hate it?

let us know with a customer review

AmazonBasics is committed to delivering customer-driven products that live up to your high standards. We encourage you to write a review sharing your experiences with the product.

Please visit: amazon.com/review/review-your-purchases#

For further services:

 Visit amazon.com/gp/heip/customer/contact-us

— or —

Contact Customer Service at 1-866-216-1072

IMPORTANT SAFEGUARDS

Read these instructions carefully and retain them for future use. If this product is passed to a third party, then these instructions must be included.

When using the product, basic safety precautions should always be followed to reduce the risk of injury including the following:

Risk of injury! Bunk beds and high beds are not suitable for children under six years due to the risk of injury from falls.

Risk of injury! Bunk beds and high beds can present a serious risk of injury from strangulation if not used correctly. Never attach or hang items to any part of the bunk bed that are not designed to be used with the bed, for example, but not limited to ropes, strings, cords, hooks, belts and bags.

Risk of injury! Use the recommended size of mattress and mattress support to effectively prevent clipping and fall. The distance from the surface of the mattress to the edge of the guardrail should be at least 6.3” (160 mm) to provide a safer and more comfortable living environment.

Risk of injury! Do not replace the original parts with substitutes to avoid damage.

Risk of injury! Do not allow horseplay on or under the bed and prohibit jumping on the bed.

Risk of injury! Do not remove the warning label from the bed.

Risk of injury! Children can become trapped between the bed and the wall, a roof pitch, the ceiling, adjoining pieces of furniture (e.g. cupboards) and the like. To avoid risk of serious injury the distance between the top safety barrier and the adjoining structure shall not exceed 2.9” (75 mm) or shall be more than 9” (230 mm).

Risk of injury! Do not use the bunk bed/high bed if any structural part is broken or missing.

• For domestic use only.
• Two competent adults must assemble this product.
• Keep children and pets away while assembling the product.
• Always use the product on a firm, level ground.
• To avoid scratching the floor, assemble the product on a soft surface, such as a carpet.
• Do not overtighten the fasteners.
• Regularly examine the product for wear and tear. Stop using the product at first sign of damage or if parts become detached.
• Do not use power tools to assemble the product. Power tools may strip or damage the parts.
• Assemble the product in a spacious area, preferably on a carpet, near the place where the product is to be located.
• The product is intended for users up to 150 lbs (68.2 kg).
• Do not allow children to play on or around the product.
• Do not allow more than 1 person (or child) to sleep on the bed.
• Always use ladder for entering or leaving the bed.
• If the bed will be placed next to a wall, the guardrail that runs the full length of the bed should be placed against the wall to prevent entrapment between the bed and the wall.
• Always follow the manufacturer’s instructions.
• A proper ventilation of the room is necessary in order to keep the humidity low and to prevent mould in and around the bed.
• Follow the information on the warnings appearing on the upper bunk end structure and on the carton.
• Always use the recommended size mattresses or mattress supports, or both, to help prevent the likelihood of entrapment or falls.
• Use of a night light may provide added safety precaution for a child using the upper bunk.
• The use of water or sleep flotation mattresses is prohibited.

• Check the product for transport damages.
• Remove all the packing materials.

Risk of suffocation! Keep any packaging materials away from children – these materials are a potential source of danger, e.g. suffocation.

Cleaning

• To clean the product, wipe with a soft, slightly moist cloth.
• Never use corrosive detergents, wire brushes, abrasive scourers, metal or sharp utensils to clean the product.

Maintenance

• Regularly check that all the components and fasteners are tightened.
• Store the product in a cool and dry place away from children and pets, ideally in its original packaging.
• Avoid any vibrations and shocks.

Net weight: 83.97 lbs (38.17 kg)
Dimensions (W x H x D): 77.5 x 50.5 x 55.75″ (196.9 x 128.3 x 141.6 cm)
Maximum user weight: 150 lbs (68.2 kg)
Classification: Fixed type
Material: Stainless steel
Suitable mattress size: Twin size: 39 x 75″ (99 x 190.5 cm)
Suitable mattress thickness: Maximum: 6″ (15.24 cm)

Love it? Hate it? Let us know with a customer review.

AmazonBasics is committed to delivering customer-driven products that live up to your high standards. We encourage you to write a review sharing your experiences with the product.

amazon.com/review/review‑your‑purchases#

amazon.com/gp/help/customer/contact‑us

Assembly

MADE IN CHINA

V01-01/20

Dog Crate User Manual

Cleaning and Maintenance

• Remove the tray after every use (the barrier needs to be removed prior to this. We recommend disinfecting the tray and then rinsing with water. Wait for the tray to dry before reinserting into the crate.
• Wipe off regularly with a damp cloth.

Safety and Compliance

• Use care when handling.
• To avoid scratching the floor, assemble the dog crate on a soft surface such as a carpet.
• Do not let children climb on or play around the crate.
• Refer to the following table for the maximum allowable weight of the pet:

Feedback and Help

Love it? Hate it? Let us know with a customer review. AmazonBasics is committed to delivering customer-driven products that live up to your high standards. We encourage you to write a review sharing your experiences with the product.

US: amazon.com/review/review-your-purchases#
UK: amazon.co.uk/review/review-your-purchases#

US: amazon.com/gp/help/customer/contact-us
UK: amazon.co.uk/gp/help/customer/contact-us

Contents

Assembly

1|

NOTICE  Make sure all parts are connected completely and securely before use.

2|

3|

4|

5|

amazon.com/AmazonBasics

MADE IN CHINA

V8-06/20

Dual Arm Full Motion TV Mount, 32″ to 65″ Support Mouvement Complet à Deux Bras pour Téléviseur, 81 à 165 cm (32 à 65 po) Voll Bewegliche TV-Aufhängung mit Doppelarm, 81 bis 165 cm (32 bis 65 Zoll) Supporto TV Full Motion a Doppio Braccio, da 81 a 165 cm (da 32 a 65 Pollici) Soporte de TV con Movimiento Completo y Doble Brazo, 81 a 165 cm (de 32 a 65 Pulgadas) TV-beugel met dubbele arm en volledig beweegbaar, 81,3 cm tot 165,1 cm TV 81 165 cm (32 65 )
B07MR4GRQP

Welcome Guide

IMPORTANT SAFEGUARDS

Read these instructions carefully and retain them for future use. If this product is passed to a third party, then these instructions must be included.
When using the product, basic safety precautions should always be followed to reduce the risk of injury including the following:
CAUTION This product is for indoor use only! Never use the mount outdoors!
CAUTION This product is for private household use only and therefore may not be used in public places like restaurants or hotels.

• Read these instructions before you begin. If you are unsure about any part of the process, contact a professional contractor or installer for assistance. Only use the correct tools as noted in these instructions. Improper installation can result in personal injuries and/or damage.
• At least two people with technical knowledge are required for installing the mount and TV. Keep children and pets away during installation, as they might swallow small parts or packaging resulting in danger of choking/suffocation.
• Check carefully to ensure that there are no missing or damaged parts. Never use defective parts.
• Use and install this product only according to the intended use as described within these instructions. Misuse may lead to hazards resulting in potential damage and personal injuries. Do not modify the structure of this product in any way. Manufacturer cannot be liable for direct or indirect damage or personal injuries caused by incorrect mounting, incorrect use, modification to the structure, or incorrect assembly. Keep the instruction manual in a safe place.
• Refer to the instruction manual provided with the TV you are going to install on this product. It includes additional information for the mounting, ventilation and suitable mounting location. Compare the technical data and requirements to make sure that this product is suitable for your TV.
• IMPORTANT! Choose the right place to install the wall plate.
• For safety reasons make sure the wall can support at least 4 times the weight of the TV and mount. The manufacturer takes no responsibility for failure caused by walls of insufficient strength.
• The maximum wall covering thickness; such as gypsum drywall, lath, plastic, etc. should not be greater than 0.63″ / 16 mm (wood stud walls) or 0.4″ / 10 mm (masonry walls). · Do not mount to drywall alone.
• Examine the wall you want to install the mount to before you start installation. Make sure that there are no hidden power supply cables, gas pipes, water pipes or other objects hidden in the wall that might be hit by the drill, screws or other hardware.
• For wood stud walls: This mount is designed to be mounted to 2″ x 4″ (51 mm x 102 mm) and Grade No. 2, wood studs that are spaced 16″ (406 mm) on center. Wood studs should be 2″ x 4″ (51 mm x 102 mm), at minimum: 1.5″ x 3.5″ (38 mm x 89 mm).
• For concrete walls: The bracket must be installed into a solid concrete wall. Make sure the concrete wall is suited for Standard Test Method for Compression Strength of Cylindrical Concrete Specimens, ASTM C39, or equivalent.
• This product should never be mounted to metal framing studs or bricks.
• If the mounting bracket will be attached to any structure other than specified in this manual, only a licensed professional contractor/installer should perform this installation. The supporting structure must support, at minimum, four times the combined weight of the mounting bracket and TV. It is the responsibility and liability of the installer to ensure the suitability of the supporting structure.
• Never install into furniture! This can lead to instability resulting in personal injuries and/or damage.
• Always support the TV with your hands when making adjustments. Make sure to tighten screws and other connections well, but do not over-tighten them. Never use an electric tool to tighten screws and nuts.
• Once you have mounted the bracket and TV, ensure they are sufficiently secure and safe to use.

Before First Use

• Check for transport damages.

DANGER Risk of suffocation! Keep any packaging materials away from children ­ these materials are a potential source of danger, e.g. suffocation.

Cleaning and Maintenance

• Periodically clean your mount with a dry cloth. Inspect all screws and hardware at regular intervals to ensure that no connections have become loose over time. Re-tighten as needed.
• Users should check and maintain the product frequently to ensure the TV and mount work normally, safely and securely. Make sure the screws are tightened every two months.

FCC ­ Supplier’s Declaration of Conformity

FCC Compliance Statement

1. This device complies with Part 15 of the FCC rules. Operation is subject to the following two conditions:
   (1) this device may not cause harmful interference, and
   (2) this device must accept any interference received, including interference that may cause undesired operation.
2. Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.

FCC Interference Statement

This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.

Canada IC Notice

• This Class B digital apparatus complies with Canadian CAN ICES-3(B) / NMB-3(B) standard.

Disposal

The Waste Electrical and Electronic Equipment (WEEE) Directive aims to minimize the impact of electrical and electronic goods on the environment, by increasing re-use and recycling and by reducing the amount of WEEE going to landfill. The symbol on this product or its packaging signifies that this product must be disposed separately from ordinary household wastes at its end of life. Be aware that this is your responsibility to dispose of electronic equipment at recycling centers in order to conserve natural resources. Each country should have its collection centers for electrical and electronic equipment recycling. For information about your recycling drop off area, please contact your related electrical and electronic equipment waste management authority, your local city office, or your house hold waste disposal service.

Specifications

Warranty Information

To obtain a copy of the warranty for this product:
US: amazon.com/AmazonBasics/Warranty UK: amazon.co.uk/basics-warranty
US: +1-866-216-1072 UK: +44 (0) 800-279-7234

Feedback and Help

Love it? Hate it? Let us know with a customer review. AmazonBasics is committed to delivering customer-driven products that live up to your high standards. We encourage you to write a review sharing your experiences with the product.

US: amazon.com/review/review-your-purchases
US: amazon.com/gp/help/customer/contact-us

Contents

You will need

Assembly

Mounting to the wall (Drywall)

1:

CAUTION

For safety reasons, this mount must be secured to at least two wood studs no less than 16″ (406 mm) apart. The studs must be capable of supporting the combined weight of the mount and display.

2:

• Use a high-quality stud finder to locate two adjacent studs. Mark both edges of each stud to help identify the exact center.

3:

4:

5:

Assembly

Mounting on Concrete Wall

1:

CAUTION

For safety reasons, the concrete wall must be capable of supporting the combined weight of the mount and the display. The manufacturer takes no responsibility for failure caused by walls of insufficient strength.
2:

3:

4:

5:

NOTICE

If the concrete wall is covered by a layer of plaster or drywall, the concrete anchor must pass completely through the layer to rest flush with the concrete surface.

Assembly

Attaching the Mount Arms to Display

1:

NOTICE

• Determine the correct length of screw to use by examining the back of your display.
• Determine the correct diameter of screw to use by carefully trying one of each size (M4, M6 and M8) from the hardware kit. Do not force any of the screws ­ if you feel resistance stop immediately and try a smaller diameter screw.

2:

Assembly

Installation

1:

2:

3:

Assembly

Operation and Adjustment

1:

2:

amazon.com/AmazonBasics

MADE IN CHINA