Pure Morning
APH260 HEPA Air Purifier
USER MANUAL
CADR | 152CFM (260 m’/h) |
Applicable Area | 355sq.ft. (33m2) max. |
HEPA Filter Lifetime | > 6 months |
Noise Level | < 49dB |
Anion Density | 20*10^6 pcslcm3 (1.22’101‘6 pcs/in3) |
Power Supply | AC 120V, 60Hz |
Related Power | 50W |
Standby Power | < 0.8W |
Operating TEMP | -10°C-55°C (14°F-131°F) |
IMPORTANT:
Please read and comply with all of the instructions and warnings in the manual before using this product. Failure to comply with the instructions and warnings provided herein may result in inaccurate results and/or damage to the product itself.
General Safety
Only use this air purifier as described in this manual.
WARNING
Follow these instructions to reduce the risk of serious injury or death and to reduce the risk of damaging the unit.
Ensure the operating voltage is the same as the parametric label. For American and Canadian users, our product will be equipped with a POLARIZED AC PLUG that will fit into the power outlet only one way. If the plug does not fit fully into the outlet, reverse the plug. If it still does not fit, contact qualified personnel to install the proper outlet.
Indication Description:
Power Button
Power on/off. Press this button to process power. It will take 30-second for the dust sensor to detect the air quality. Then it will start to detect the PM2.5 value on the LED display. The PM2.5 indicator will light up blue.
Fan Speed
Press to start air circulation. 3 fan speeds are available (low, medium, and high, corresponding with the values 1, 2, and 3 on the LED Display).
COD Anion
Press to activate/inactivate the Anion Mode.
Timer
Press to switch to timing mode. (Timing can be set from 1-12 hours or to NO TIMER, corresponding to values 1-12 and 00 on the LED display.)
Sleep Mode
Press to activate/inactivate Sleep Mode.
NOTES:
Auto Mode
PM2.5 ( pg/m3 ) | AQI | Fan Speed |
0.0-12.0 | 0-50 | Low |
12.1-35.4 | 51-100 | Medium |
35.5-150 | 101-200 | High |
Instant PM2.5 value is one of the core references for the indoor air quality index (AQI). Regarding the AQI, working modes, and lights indicators, Airthereal APH260 Air Purifiers comply with EPA regulations.
For additional information, please reference the United States Environmental Protection Agency (EPA): https://cfpub.epa.gov/airnow/index.cfm?action=aqi_brochure.index#partide
UV-C Light
Press to activate/inactivate the UV-C Light mode.
Know the 7-in-1 HEPA Filter
When the replacement icon lights up (when the PM2.5 light turns RED and keeps flashing), this is a reminder to check and change the air filter.
Purchase a new Airthereal Air Filter Replacement through one of the following methods: www.airthereal.com
Search on Amazon: AHP260 filter
Only use Airthereal Pure Morning APH260 replacement filters for this unit.
How to Replace the Air Filter
Take out the old filter by pulling the tab. Unwrap a new filter.
Cleaning
Unplug the power cord before cleaning.
Problem | Cause | Solution |
No power or response. | The unit is not plugged into an electrical outlet. | Connect the plug to a powered electrical outlet. |
The outlet is not working properly. | Try plugging the air purifier into a different outlet. | |
The back cover Is not properly placed on the unit. | Properly replace the back cover as noted in the Getting Staled section. | |
The power cord is damaged. | Immediately discontinue use and contact Customer Support. | |
An air purifier is defective or malfunctioning. | ||
PM2.5 Value on the LED display changes quickly. | Auto Mode has just been turned on. | Allow the air purifier to run for 305. They will change a stabilized status based on the detected air quality |
The unit is defective or malfunctioning. | Immediately discontinue use and contact Customer Support. | |
Unusual noise while operating. | Dirty filters. | Replace the air filters as instructed in the Replacing the Air Filters section on page 8. |
Filters installed improperly. | Properly place filter as noted in the Getting Started and Replacing the Air Filters sections (pages 5 8 8). | |
The foreign object inside the unit. | Immediately discontinue use and contact Customer Support. DO NOT attempt to open the air purifier. | |
Flimsy or slanted surfaces resulting in abnormal noise and vibrations. | Place air purifier on hard, flat surfaces. | |
Significantly reduced airflow. | Not enough space around the unit. | Ensure that there are at least 15 inches (38 cm) between the unit and other objects. |
Poor air purification quality. | The surrounding area exceeds the applicable area. | APH260 is applicable to 355 ft2 (33 m’). |
Air inlet or outlet is blocked.
outlet. |
Remove objects that block the air inlet or ct | |
properly Fattens) not placed
in housing. |
Properly place filter as noted in the Getting Started and Replacing the Filters sections (pages 5 & 8). |
Product Name | True HEPA Air Purifier |
Model | Pure Morning APH260 |
Manufacturer Warranty Period | 2 Years |
For your own reference, we strongly recommend that you record your order number and date of purchase. |
TERMS & POLICY
Quality has always been Airthereal’s top priority. For your 100% hassle-free shopping experience, Airthereal provides a 2-Year manufacturer’s limited warranty for APH260 Air Purifiers.
For more information, please reference airthereal.com/pageshvarranty.
ALL EXPRESSED AND IMPLIED WARRANTIES, INCLUDING THE WARRANTY OF MERCHANTABILITY, ARE LIMITED TO THE PERIOD OF THE LIMITED WARRANTY.
Always here to help you:
www.airthereal.com
A REAL ROOM, AN ETHEREAL AMBIANCE