AFTERSHOKZ OpenMove Wireless Open-Ear Headphone

AFTERSHOKZ OpenMove Wireless Open-Ear Headphone

OVERVIEW

How to Set Up Open Move

1.  Charge
   Charge the headphones with the included USB-C charging cable. The LED indicator will change from red to blue when charging is complete.
2.  Pair
   Begin with your headphones powered off. Enter pairing mode by pressing and holding volume+ until Audrey says “pairing” and the LED indicator flashes red and blue.
3. Connect
   Open your device’s Bluetooth®menu and select “OpenMove by AfterShokz.” Audrey will say “connected” and the LED indicator will flash blue one time.
   Let us take care of you! Protect your headphones against defects.
   Make sure to register your OpenMove at Aftershokz.com

Multifunction Button (A)

Volume+ / Power Button (B); Volume- Button (C)

Specifications

LED Indicator

Multipoint Pairing

Multipoint pairing allows OpenMove to be connected to two devices at once, allowing users to seamlessly transition between the two.

1. Begin with your headphones powered off.
2. Press and hold volume+ until Audrey says “pairing” and the LED indicator flashes red and blue.
3. Press and hold the multifunction button and volume+ button for 3 seconds. Audrey says “multipoint enabled”.
4. Open your first device’s Bluetooth®menu and select “OpenMove by AfterShokz.” Audrey says “connected”.
5.  Turn your headphones off.
6. Re-enter pairing mode by pressing and holding volume+ until Audrey says “pairing” and the LED indicator flashes red and blue.
7.  Open your second device’s Bluetooth®menu and select “OpenMove by AfterShokz.” Audrey says “connected”.
8.  Turn your headphones off.
9. Turn your headphones on. Your headphones are now connected to both devices. Audrey says “connected” and “device 2 connected”.
10. To turn off multipoint pairing: Press and hold the multifunction and volume – buttons for 3 seconds when pairing. Audrey says”multipoint disabled”.

More information: bit.ly/aftershokzpairing

How to Reset Your Headphones

1. Begin with your headphones powered off.
2. Enter pairing mode by pressing and holding volume+ until Audrey says “pairing” and the LED indicator flashes red and blue.
3. Press and hold the multifunction button, volume+ button, and volume- button(all three buttons) simultaneously for 3-5 seconds, until you hear two beeps or feel vibrations.
4. Turn your headphones off. OpenMove is now reset and can be re-paired to your device.

Optional Accessories

Earplugs (D)
Use earplugs with headphones in environments where it is safe to block out ambient noise, such as on a train or airplane.

1.  Roll earplugs firmly between fingers and place in ears.
2. To adjust EQ settings for earplugs, press and hold volume+ and volume- buttons simultaneously while music is playing. Continue through options until “earplug mode.”
3. Switch EQ to other settings when you take out the earplugs.

Manufacturer

AfterShokz LLC
3200 Gracie Kiltz Lane, 4th floor, Austin, TX 78758

8000500039(A0)

Pdf Download Resources

• AFTERSHOKZ OpenMove Wireless Open-Ear Headphone [pdf] User Guide
• Read more: https://manuals.plus/aftershokz/openmove-wireless-open-ear-headphone-manual#ixzz7cupOPJlg

FAQ’S

My headphones won’t charge. What should I do?

Make sure your headphones are fully charged. If they still won’t charge, please contact us at 1-800-843-4287 and we will be happy to assist you.

My headphones won’t pair. What should I do?

Make sure your headphones are powered off. If they still won’t pair, please contact us at 1-800-843-4287 and we will be happy to assist you.

My headphones won’t connect to my device. What should I do?

Make sure your device is in pairing mode and that the OpenMove is powered off. If they still won’t connect, please contact us at 1-800-843-4287 and we will be happy to assist you.

Are AfterShokz OpenMove waterproof?

OpenMove are rated IP55 in terms of waterproofness, therefore, they can be exposed to light sweat/ moisture and dust but we do not recommend showering with them.

Can I wear AfterShokz in shower?

No, they are water-resistant but not waterproof. You could and almost definitely would damage these in the shower. They might work in a bath if you’re not going to dunk your head.

Can I use AfterShokz with Iphone?

Yes, I have two Aftershokz headphones, including the OpenComm headset, and they both pair easily with my Apple iphone and mini ipad.

Can AfterShokz be used to make/take calls?

Yes. All our wireless models are equipped with dual noise canceling microphones for making and taking phone calls when paired with a smartphone or other Bluetooth-enabled device.

Can you sleep with AfterShokz?

Believe it or not, many people use their AfterShokz headphones to sleep! Turn out the lights, throw on some white noise, and get comfy. If you sleep with a snoring partner or you have pets running around that could disturb your shut-eye, your earplugs will definitely come in handy!

Does AfterShokz turn off automatically?

The right earpiece features two buttons to control the volume. The volume-up button also doubles as the power button. Long-press it to turn the device on and off—which you’ll want to remember, since the headphones don’t turn themselves off automatically.

Where is mute button on AfterShokz?

The volume up and down buttons. Pressing and holding the volume up turns the headset on or off. Pressing both for two seconds will mute/unmute the mic when on a call.

How do you check an AfterShokz battery?

You can check the battery status by powering on your headphones and clicking volume+ or volume- while no music is playing. Audrey will say “Battery High,” “Battery Medium,” “Battery Low” or “Charge Me.”

What does purple light mean on AfterShokz?

Purple light means it’s dead.

How do you reset Bluetooth headphones?

Unplug the headphones from their charging port. Press and hold the power button for 10 seconds. Wait for the LED light to blink to indicate that you have successfully reset your headphones.

VIDEO

AFTERSHOKZ OpenMove Wireless Open-Ear Headphone
www://uk.shokz.com/

Step 1. Charge
Charge the headphones with the included micro-USB cable. The micro-USB charging port is located on the right side of the headphones (as worn) and enclosed by a small protective hinged cover. The hinged cover can be lifted by using a fingernail. When the hinged cover is lifted, the Micro-USB charging port is revealed. The LED indicator will turn blue when charging is complete.
Step 2. Pair
While off, press and hold the power button for 5 seconds to enter pairing mode. The LED indicator will flash blue and red repeatedly while in discovery.
Step 3. Connect
Enable the Bluetooth® settings on your device and select “Trekz Air by AfterShokz”. The LED indicator will turn blue once connected.

Begin by holding the headphones horizontally, with the transducer side facing up, closest to your body. Lift the headphones over your head, so the back of the wraparound headband sets in place at the base of the head, and the transducers rest on your cheekbones in front of your ears (not nested inside or covering your ears).

(The multifunction button is a triangle button located on the outside of the left transducer)
Play/pause music:
Click the multifunction button once.
One beep.
Skip to next song:
Double-click the multifunction button while music is playing.
One beep.
Answer/end call:
Click the multifunction button once.
One beep.
Answer call waiting and put the current caller on hold:
Click the multifunction button once to switch between callers.
One beep.
Answer call waiting and hang up on current caller:
Press and hold the multifunction button for 2 seconds.
One beep.
Reject a call:
Press and hold the multifunction button for 2 seconds.
Two beeps.
Voice dial:
Press and hold the multifunction button for 2 seconds.
“Voice dial”.
Redial last number:
Double-click the multifunction button.
“Last number redial”.

(The volume/power buttons are located on the underside of the right arm of the headphone. The volume up button has a raised dot on it. The volume up button also acts as the power button. The volume down button is the button next to the volume up and power button.)

 Power on/off
Press and hold the power button for 2 seconds
Four beeps and “welcome to Trekz Air”
Mute
Press and hold both for 2 seconds while on a call
“Mute on” or “mute off”
Change EQ setting
Press and hold both for 2 seconds while music is playing
“Equalization changed”
Check battery status
Click the volume up or down while music is paused
“Battery high, medium, low, or charge me”
Adjust volume
Click the volume up or down button to adjust volume
One beep

Part number
AS650
Speaker type
Bone conduction transducer
Frequency response
20Hz~20KHz
Sensitivity
100 ± 3dB
Microphone
-40dB ± 3dB
Bluetooth version
Bluetooth® v4.2
Compatible profiles
A2DP, AVRCP, HSP, HFP
Wireless range
33 ft (10m)
Battery
Rechargeable lithium ion
Continuous play
Up to 6 hours
Standby time
Up to 20 days
Charge time
2 hours
Weight
1.06 oz
Warranty
2 years

Step 1. Enter pairing mode
Step 2. Press Multifunction button + volume up/power button for 2 seconds (Audrey Says^TM“multipoint enabled”)
Step 3. Pair first device (Audrey Says^TM “Connected”)
Step 4. Shut down
Step 5.  Re-enter pairing mode
Step 6.  Pair second device (Audrey Says^TM “second device connected”)
Step 7.Turn the device off, then power back on

Solid red: Charging
Solid blue: Charging complete
Flashes red and blue: Pairing mode
Flashes blue: Incoming call
Flashing red every 2 minutes: Low battery

Start with your headphones off
Enter pairing mode, by pressing and holding volume+ until Audrey says “Pairing” and the LED light flashes red and blue. Then press and hold the multifunction button, and both volume+ button and volume- button (all three buttons) simultaneously for 3-5 seconds until you hear two beeps or feel vibrations.  Turn your headphones off.  Trekz Air is now reset and can be re-paired to your device.

To validate your 2-year warranty, register your product at http://bit.ly/RegisterMyTrekz
Only purchases from authorized resellers are supported by our warranty policy.

Fitband
Silicon rubber bands provide adjustability to accommodate smaller head sizes.
Step 1. Slide Fitband over the right transducer and along the right arm to rest over the charging port.
Step 2. Slide the second Fitband over the left transducer and along the left arm to align evenly with the right arm.
Step 3. Rotate the Fitbands around the arms until the desired fit is achieved.

Use with headphones in environments where it is safe to block out ambient noise, such as on an airplane or train.
Step 1. Roll earplugs firmly between fingers and place in ears.
Step 2. To adjust EQ settings to reduce or enhance bass while wearing earplugs, press and hold volume up and down buttons simultaneously.
Step 3. Switch EQ to normal condition when you take out the earplug.

User Guide

How to Set Up Aeropex

1. Charge
   Charge the headphones with the included magnetic charging cable. The LED indicator will turn from red to blue when charging is complete.
2. Pair
   Start with your headphones off. Enter pairing mode by pressing and holding volume+ until Audrey says “pairing” and the LED indicator flashes red and blue.
3. Connect
   Open your device’s Bluetooth® menu and select “Aeropex by AfterShokz.” Audrey says “connected” and the LED indicator will flash blue one time.

Multifunction Button (A)

Volume+ / Power Button (B); Volume- Button (C)

Specifications

LED Indicator

Multipoint Pairing

Multipoint pairing allows Aeropex to be connected to two devices at once, allowing users to seamlessly transition between the two.

1. Start with your headphones off.
2. Press and hold volume+ until Audrey says “pairing” and the LED indicator flashes red and blue.
3. Press and hold the multifunction button and volume+ button for 3 seconds. Audrey says “multipoint enabled.”
4. Open your first device’s Bluetooth® menu and select “Aeropex by AfterShokz.” Audrey says “connected”
5. Turn your headphones off.
6. Re-enter pairing mode by pressing and holding volume+ until Audrey says “pairing” and the LED indicator flashes red and blue.
7. Open your second device’s Bluetooth® menu and select “Aeropex by AfterShokz.” Audrey says “connected.”
8. Turn your headphones off.
9. Turn your headphones on. Your headphones are now connected to both devices.
10. To turn multipoint pairing off: Press and hold the multifunction button and volume- button for 3 seconds. Audrey says “multipoint disabled.”

More information: bit.ly/ASMultipoint

Moisture Detected Alert

This device can detect liquid residue. During charging, if there is sweat or other liquid residues in the charging interface, the device’s light will flash blue and red. The core of the headphones will also vibrate and emit a “Beeb Beeb” warning sound. Please dry the liquid on the charging port and then the device can be charged normally.

How to Reset Your Headphones

1. Start with your headphones off.
2. Enter pairing mode by pressing and holding volume+ until Audrey says “pairing” and the LED indicator flashes red and blue.
3. Press and hold the multifunction button, volume+ button, and volume- button (all three buttons) simultaneously for 3-5 seconds, until you hear two beeps or feel vibrations.
4. Turn your headphones off. Aeropex is now reset and can be re-paired to your device.

Optional Accessories

Earplugs (D)
Use headphones in environments where it is safe to block out ambient noise, such as on a train or airplane.

1. Roll earplugs firmly between fingers and place them in the ears.
2. To adjust EQ settings to reduce or enhance bass while wearing earplugs, press and hold volume+ and volume- buttons simultaneously.
3. Switch EQ to the original setting when you take out the earplugs.

Manufacturer

AfterShokz LLC
6057 Corporate Dr., East Syracuse, NY 13057

Let us take care of you! We’ve got your back against defects.
Register your Aeropex at
register.aftershokz.com

AfterShokz OpenMove Wireless Headphones

Specifications

• DIMENSIONS: 4.8 x 3.94 x 1.81 inches,
• WEIGHT: 1.06 ounces,
• BLUETOOTH: V5.0,
• FREQUENCY RESPONSE: 20Hz – 20kHz,
• IMPEDANCE: 8ohm,
• BATTERY LIFE: Up to 6 hrs.,
• MANUFACTURER: AfterShokz

Shokz is the most popular name in bone conduction headphones. These headphones offer the Shokz superior sound technology. These bone conduction headphones are similar to other bone conduction headphones. They are very comfortable and light to wear without blocking out your ears. It also features a Multifunction Button as well that allows you to control the tracks, volume and calls. They also have a sweatproof feature which is perfect for athletes. They also feature a moderate battery life. Their open ear design allows you to hear good quality music while being aware of their surroundings as well.

Design

They feature a unique design where the earpieces don’t sit on your ears. They sit on your cheekbones and work by transmitting vibrations in order to transmit sound to your auditory nerve. This leaves the ears open to the surrounding sounds. These earpieces are attached to a flexible metal allowing you to move the bone conduction band easily. They firmly grip your cheekbones without falling off.

Sound Quality

The Shokz OpenMove’s sound quality is rich and detailed. They are powered with Premium Pitch 2.0. They have the ability to deliver precise audio with optimal volume and rich bass.

Water Resistance

They come with a rating of IPX5 which makes them sweatproof and waterproof however, a lot of wetness or water might affect their sound quality.

Battery Life

They have a moderately acceptable battery life of 6 hours. This battery life is provided while providing features like dual-noise canceling microphones.

Contents

• OpenMove Headphones
• USB-C Charging Cable
• Carrying Bag

AfterShokz OpenMove Wireless Bone Conduction Headphones Controls

Track Control Functions

• To play/pause music: Click the Multifunction Button once.
  Prompt Voice Indication: One Beep
• To skip to the next song: Double-Click the Multifunction Button.
  Prompt Voice Indication: One Beep
• To skip to previous music: Triple-Click the Multifunction Button.
  Prompt Voice Indication: One Beep
• To switch languages: Double-Click the Multifunction Button while on pairing.
  Prompt Voice Indication: English
• To answer calls: Click the Multifunction Button once.
  Prompt Voice Indication: One Beep
• To end calls: Click the Multifunction Button once.
  Prompt Voice Indication: One Beep
• To answer waiting call and hang up the current call: Press and Hold the Multifunction Button for 2 seconds.
  Prompt Voice Indication: One Beep
• To reject a call: Press and Hold the Multifunction Button for 2 seconds.
  Prompt Voice Indication: Two Beep
  To activate device’s voice assistant: Press and Hold the Multifunction Button for 2 seconds.
  Prompt Voice Indication: Device Beep
• To redial last number: Double Click Multifunction Button, when idle.
  Prompt Voice Indication: Redial Last Number

How to Turn ON/OFF the headphones?

You can turn on the headphones by pressing and holding the volume+ button for 2 seconds.
Prompt Voice Indication: Welcome to AfterShokz

To Turn Off
You can turn on the headphones by pressing and holding the volume+ button for 3 seconds.
Prompt Voice Indication: Power off

How to Mute the microphone of the headphones?

Press and hold for 2 seconds the buttons on both the headphones while on call.
Prompt Voice Indication: Mute on or Mute off.

How to switch EQ of the headphones?

You can switch the EQ by pressing and holding both buttons for 3 seconds while the music is playing.

Prompt Voice Indication: Standard mode / Vocal booster mode / Earplug mode

How to check the battery status of the headphones?

In order to check the battery status, click the volume button while the music is paused.
Prompt Voice Indication: Battery high/Battery medium/ Battery low/Charge me

How to charge the headphones?

• Use the provided USB Type C cable for charging the AfterShokz OpenMove Wireless bone conduction headphones.
• LED Indication: Red while charging
• Blue when fulling charged

How to Pair the headphones?

1. Turn off your headphones.
2. Press and hold the Volume+ button and the prompt voice will say “pairing”
   LED Indication: Flashes Red and Blue

How to Connect the headphones?

After turning on the pairing mode of your headphones, follow the following steps.

1. Turn on your device’s Bluetooth
2. Open the Bluetooth menu and select “OpenMove by AfterShokz”
3. The voice prompt will say “connected”
   LED Indication: Flash Blue Light once.

Multipoint pairing?

This feature of the OpenMove headphones allows you to connect to two devices at a time, allowing a smooth transition between the two devices. This can be done by the following steps:

1. Turn off the headphones.
2. Press and hold the Volume+ button, the voice prompt will say “pairing” and the LED will flash red and blue lights.
3. Press and hold for 3 seconds the multifunction button and the volume+. The voice prompt will say “multipoint enabled”
4. Turn on the Bluetooth of the first device and connect the headphones using the previously mentioned steps.
5. Turn off the headphones.
6. Press and hold the Volume+ button, to pair again, until the voice prompt will say “pairing” and the LED will flash red and blue lights.
7. Turn on the Bluetooth of your second device and connect the headphones to this.
8. Turn off the headphones.
9. Turn on the headphones, you will now be connected to both devices.
10. To turn off this feature: Press and Hold the MFB for 3 seconds until the voice prompt says “multipoint disabled”.

How to Reset the headphones?

1. Turn off the headphones
2. Press and hold the Volume+ button, to enter pairing mode, the voice prompt will say “pairing” and the LED will flash red and blue lights.
3. Press and Hold the Multifunction button, volume + and volume – button simultaneously, until two beeps or vibrations are heard.
4. Turn off the headphones. They will be reset now.

PROS

• Good Sound Quality
• Earplug Mode
• Budget-Friendly
• Light Sound Leak

CONS

• Uncomfortable Ear hook

VERDICT
If you want something that stays on and is lightweight the Shokz Openmove bone conduction headphones are a good option.

FREQUENTLY ASKED QUESTIONS

• How many devices can connect at the same time?
  You can connect two devices at the same time, using the multipoint function. You can follow the steps mentioned earlier to achieve this.
• Will this fit over the ear if i have on glasses?
  Yes, they fit comfortably while you have glasses on.
• Can people around you hear your music?
  No, unless the volume is maximum, but that be painful for your ears.
• Are they Rain resistant?
  They have a water-resistant rating of IP55, which means they can handle light rain, dust and sweat only.
• Are these comfortable to sleep in?
  No, they aren’t preferred to be worn while sleeping as they might move and cause discomfort.

AfterShokz OpenComm – Headset

AfterShokz OpenComm – Headset

How to Set Up OpenComm

Charge
Use the included magnetic induction cable to charge the headset. The LED indicator will change from red to blue when charging is complete.

 Pair
Start with your headset powered off. Enter pairing mode by pressing and holding the volume+ button until OpenComm says “pairing” and the LED indicator flashes red and blue.

Connect
Open your device’s Bluetooth® menu and select “OpenComm by AfterShokz.” OpenComm will say “connected” and the LED indicator will flash blue one time when a connection has been established.

Multifunction

While your headset and cellphone are connected.

Function                                                  Action                                                                                                                   Voice Prompt

Volume + / On-off ; Volume –

Function                                   Action                                                                                                                   Voice Prompt

Headset Specification

LED Indicator

NFC Function ( Near Field Communication)

Headset support NFC pairing.

1. Power on the headphones or set to pairing mode.
2. Position the NFC sign area of the headset close to the NFC detection area of mobile device.
3. Blue light will flash one time when headset is paired successfully, and OpenComm will say “connected”.

Moisture Detection Alarm

Headset has a moisture detecting function. If moisture is present on the charging port while being charged, the headset will vibrate with an audible “beep” warning.

Restore Factory Settings

Start with the headset powered off. Set the headset to pairing mode. To do this, hold the Multifunction button, volume+, and volume- button at the same time for 3 seconds, until you hear the notification tone and feel the vibration. Power the headset off.

Storage and Maintenance

1. Headset should be kept in cool and dry place, with a temperature from 0°C to 45°C. Working in an extremely cold, extremely hot, or high humidity environment may limit the working time and shorten the battery life of the headset.
2. Please charge the headset when it has not been in use for an extended period of time.
3. Listening at a high volume may damage your hearing and distort the audio quality.
4. Please only clean headset with a soft dry cloth.
5. Please do not charge headset immediately after exercising in order to prevent damage to the headset circuitry that can be caused by liquid residue exposure.
6. Keeping the charging port dry will reduce the possibility of damaging the headset.

Services

AfterShokz promises that under normal use, operation and maintenance conditions, we will offer a free two-year warranty. Please contact local retailer for more help.

Discarding Product Guidelines

Please do not discard the electronic headset parts in the same receptacle as your daily garbage. Reference your country or region’s guidelines on appropriate measures for collecting discarded electronic products. Please consult local authorities for more details.

Contact Us

AfterShokz LLC
3200 Gracie Kiltz Lane, 4th floor, Austin, TX 78758 www.aftershokz.com

FAQ’S

Why can’t I connect to my headset?

Make sure your headset is powered on and in pairing mode. Make sure your device is set to search for Bluetooth® devices.

Why do I hear static when I listen to music?

You may be too far from your device or there may be interference. Move closer to your device or change the location.

Why do I hear a high-pitched tone when I listen to music?

This is a normal condition due to the bone conduction technology. It does not affect the sound quality.

Why does my music skip when I move?

This is a normal condition due to the bone conduction technology. It does not affect the sound quality.

How many devices can AfterShokz Opencomm connect to?

Shokz headphones are two devices equipped with multipoint pairing capabilities, which allows users to connect to two devices at the same time. While you won’t receive audio from both devices at the same time, you’ll be able to transition from one device to the other.

Does AfterShokz cancel noise?

Yes. All our wireless models are equipped with dual noise canceling microphones for making and taking phone calls when paired with a smartphone or other Bluetooth-enabled device.

Can I connect my AfterShokz to my computer?

For Android devices, you need to enter the Bluetooth settings, turn on Bluetooth, and start searching for the headphones. Once the device picks up the headphones, tap on the name and click to pair.

Can I wear AfterShokz in the rain?

AfterShokz are designed to accompany you on every adventure, so it’s no surprise when our customers ask how their new headphones will fair in the rain. Aeropex and Xtrainerz are both waterproof and can be used in the rain, for watersports, and everything in between!

Can I shower with my AfterShokz?

No, they are water-resistant but not waterproof. You could and almost definitely would damage these in the shower. They might work in a bath if you’re not going to dunk your head.

What is the difference between Shokz and AfterShokz?

AfterShokz has been officially renamed as Shokz, creating a “shorter, more powerful word that is easier to remember and share, helping to spread the word and bring the benefits of open-ear listening to more sports enthusiasts”.

How long does it take to charge AfterShokz OpenComm?

OpenComm headsets will charge in 1 hr with the unique quick charging cable they come with.

How do I know if my AfterShokz are fully charged?

When fully charged, the LED will turn blue. To protect your headphones from damage, moisture, or debris, remember to secure the protective rubber flap over the charging port back in place. Please allow time for your headphones to air dry from rain, snow or sweat before you begin charging.