adorcam A4 Smart IP Camera with Battery

adorcam A4 Smart IP Camera with Battery

Packing list

MODEL: A4 Camera

What is in the Box?

1x camera, 1x bracket, 1x screws
1x USB cable, 1x Quick User Guide

Product Details

Install Adorcam APP

3.1 Search “Adorcam” in the App Store or google play store, or scan the below QR Code to download and install it on your smartphone.

https://apps.apple.com/us/app/adorcam/id1505689038

https://play.google.com/store/apps/details?id=com.xm.adorcam

NOTE: Please allow the below 2 permissions when first running App.

1. Allow Adorcam to use mobile cellular data and wireless LAN (Function: If not allowed, it will be failed to add IP camera).
2. Allow Adorcam to get system push message permissions (Function: When the camera triggers motion detection or audible alarm, the phone can receive alarm push).

3.2 Register Account：
New users need to register by e-mail, click “Register”, follow the steps to complete the registration of the account, and log in.

Add Camera to APP

4.1 Insert TF card
Please insert a TF card to record videos when motion is detected and playback. ( card not included, supports 128GB Max.)
4.2 Power on the camera
Press and hold on the Power Button for 5 seconds to Turn on the Camera (if it can not power on, please plug in DC5V 1A/2A phone adapter to charge 15min first). The power adapter is not included in the packing list.

NOTE: Ensure the indicator light slowly blinking in RED before setup WiFi
4.3 Setup Wi-Fi
4.3.1 Bring the camera and phone to the router within 1 to 3 feet (30 to 100 cm) and connect wifi.

4.3.2 Run Adorcam App, Click “Add Device” and select “BATTERY CAMERA”.
4.3.3 Select 2.4Ghz WiFi SSID and input password, tap “Connection”
4.3.4 Follow the “Operation Guide” on App, aim the lens of the camera directly to the QR code at a distance of 5-8 inches. A tone will be heard when successfully scanned.

4.3.5 After the device recognizes the QR code, it will sound a tone, if heard, then tap “Hear a tone” and wait for “Connect Network”.
4.3.6 After successfully connecting the network, you can name the camera, and find a good mounting spot according to the wifi signal strength, then click “Finish” and it will ump to devise list. Select one camera and play it, then you can watch the real-time video.

Tips:

1. Please select 2.4G HZ WiFi
2. Does not support 5G HZ WiFi
3. Move the camera closer to the wireless router to ensure a good wireless signal

• Please remove the protective film on the camera lens and keep the lens clean.
• Tape Next to generate a QR code.
• Aim the lens of the camera directly at the QR code at a distance of 5-8 inches.
• A tone will be heard when successfully scanned.

The network is connecting, please be patient.
Tips:
If the network connection is unsuccessful:

1. Please check if the WiFi username and password are correct, and then generate a new QR code to scan again
2. Move the camera closer to the wireless  network router
3. If it is still unsuccessful, please press the power button twice to reset the camera and try again

The current location is good to mount the camera

Device Menu

1. Play 2. Share 3. Snoone Alerts 4. Playback 5. Settings 6. Camera Name 7. Battery Volume 8.WiFi Signal 9. Disarm Mode 10. Motion Detection Off 11. Camera Time 12. Messages 13. Help 14. About the app 15. Devices	16. Events 17. Security 18. Explore 19. Bit rate 20. Record 21. Snapshot 22. Hold & Speak 23. Audio 24. Menu 25. Events 26. Night Vision 27. Sound Alarmed 28. Settings 29. Close

Camera Settings Menu:

No.	Camera Settings
1	Battery Volume
2	Camera Name
3	WiFi
4	Camera On
5	Auto Night Vision
6	Snooze Shortcut
7	Power Manager
8	Motion Detection
9	Audio Settings
10	Time Settings
11	Video Storage
12	Device Info
13	Mounting Guide
14	Restart Device
15	Remove Device

Share Video to Friend

Click the share icon or option and select permission and select connected cameras and input the friend’s account to share.
NOTE: Firstly ensure Friend’s account has already registered in the Adorcam app

Appendix:
LED Status Description

Trouble Shooting Sheet

Q/A

1. Battery Camera doesn’t support 7/24 constantly recording, only supports events recording when sensor human body motion detection.
2. The battery camera doesn’t support any PC S/W or browser.
3. The battery Camera doesn’t support 5G Wi-Fi
4. Battery Camera charging supports DC5V 1A/2A plug. fully charged time: 5-6 hours
5. IP battery camera supports offline recording.
   IP battery camera cannot work without Wi-Fi. It supports events recording when Wi-Fi is disconnected, but firstly the camera should be ever connected to the Wi-Fi network.
6. It is unlimited to add an IP camera to the app, and also unlimited to share video with another person. But the system just allowed 2 persons online in max simultaneously.
7. Regarding with TF card:
   7.1 please kindly ensure TF card, a good brand such as Kingston, Sandisk, Class 10 level, 4-128 GB
   7.2 Please first format the TF card on PC or plugin it again when adorcam cannot read the TF card.
   7.3 If no TF card in the camera, there is no alarm recording, the system will snap photos and be saved in the “Events” list. If inserted TF card, there will be no snapshot photos.

FCC STATEMENT

NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications.
However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help

Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:

1. this device may not cause harmful interference.
2. this device must accept any interference received, including interference that may cause undesired operation.

RF Exposure Warning Statements
This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. This equipment shall be installed and operated with a minimum distance of 20cm between the radiator & body.

DOWNLOAD RESOURCES

• adorcam A4 Smart IP Camera with Battery [pdf] User Guide A4, Smart IP Camera with Battery
• Read more: https://manuals.plus/adorcam/a4-smart-ip-camera-with-battery-manual#ixzz7dZi9xc4H

FAQ’S

How long does it take to charge Adorcam?

Power on the camera
Press and hold on the Power Button for 5 seconds to Turn on the Camera (if it can not power on, please plug in DC5V 1A/2A phone adapter to charge 15min first).

How do I connect my Adorcam to WiFi?

2 Run Adorcam App, Click “Add Device” and select “BATTERY CAMERA”. 4.3. 3 Select 2.4Ghz WiFi SSID and input password, tap “Connection” 4.3. 4 Follow the “Operation Guide” on App, aim the lens of the camera directly to the QR code at a distance of 5-8 inches.

Why is my camera not connecting to WiFi?

You need to reset the cameras by pressing the reset button on the bottom of the cameras for 10 seconds (led red flashing means reset is complete). After resetting the cameras, you need to plug the ethernet cable inside the camera’s connectors and connect it to the new router.

How do you set up Adorcam?

Turn on the camera pressing the power. Button from your phone open play store search and download add all cam. App install and then register clicking sync up or singing if you already have an account.

Why the camera can not be connected to the App?

Please make sure the camera is powered on, and the network connection is stable.

Why the camera can not be added to the App?

Please make sure your phone has been authorized by Adorcam APP.

Why the camera can not connect to WiFi network?

Please check if your phone has been authorized by Adorcam APP. If it still can not connect, please restart your phone and try again.

Why motion detection is not working?

Please check if your phone has been authorized by Adorcam APP. If it still can not work, please restart your phone and try again.

Why video recording is not working?

Please check if your card has enough space for recording videos. If it still can not work, please insert a new TF card or format it.

How far will wireless cameras work?

Wireless security camera systems work well as long as the signal from the cameras to the central hub is clear and uninterrupted. Within the home, wireless systems usually have a range of about 150 feet or less.

How can I connect my CCTV camera to my phone without Internet?

Download the Necessary Apps.
Connect to a Local Network Without Internet Access.
Connect Sender Device from App.
Check Stream From the Receiver Device.

Can I connect an Adorcam camera directly to my computer?

An Adorcam camera can connect directly to your network or computer, and there are three ways to do so. The three ways listed below do not require a NVR. A NVR, or Network Video Recorder, is the device that IP cameras connect to.

adorcam A4 Smart IP Camera with Battery
www://zeeporte.com/